sepa_oddcycle.c

Go to the documentation of this file.

/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
/*                                                                           */
/*                  This file is part of the program and library             */
/*         SCIP --- Solving Constraint Integer Programs                      */
/*                                                                           */
/*  Copyright (c) 2002-2026 Zuse Institute Berlin (ZIB)                      */
/*                                                                           */
/*  Licensed under the Apache License, Version 2.0 (the "License");          */
/*  you may not use this file except in compliance with the License.         */
/*  You may obtain a copy of the License at                                  */
/*                                                                           */
/*      http://www.apache.org/licenses/LICENSE-2.0                           */
/*                                                                           */
/*  Unless required by applicable law or agreed to in writing, software      */
/*  distributed under the License is distributed on an "AS IS" BASIS,        */
/*  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. */
/*  See the License for the specific language governing permissions and      */
/*  limitations under the License.                                           */
/*                                                                           */
/*  You should have received a copy of the Apache-2.0 license                */
/*  along with SCIP; see the file LICENSE. If not visit scipopt.org.         */
/*                                                                           */
/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
/**@file   sepa_oddcycle.c
 * @ingroup DEFPLUGINS_SEPA
 * @brief  oddcycle separator
 * @author Robert Waniek
 * @author Marc Pfetsch
 *
 * We separate odd cycle inequalities in the implication graph. Implemented are the classic method
 * by Groetschel, Lovasz, and Schrijver (GLS) and the levelgraph method by Hoffman and Padberg (HP)
 *
 * Odd cycle inequalities are lifted by a heuristic method based on an idea from Alvarez-Valdes,
 * Parreno, and Tamarit.
 *
 * Some part of this code is based on the odd cycle separator of the program colorbitopt by Marc
 * Pfetsch.
 */
 
/*---+----1----+----2----+----3----+----4----+----5----+----6----+----7----+----8----+----9----+----0----+----1----+----2*/
 
#include "blockmemshell/memory.h"
#include "dijkstra/dijkstra.h"
#include "scip/pub_implics.h"
#include "scip/pub_lp.h"
#include "scip/pub_message.h"
#include "scip/pub_misc.h"
#include "scip/pub_misc_sort.h"
#include "scip/pub_sepa.h"
#include "scip/pub_tree.h"
#include "scip/pub_var.h"
#include "scip/scip_branch.h"
#include "scip/scip_cut.h"
#include "scip/scip_general.h"
#include "scip/scip_lp.h"
#include "scip/scip_mem.h"
#include "scip/scip_message.h"
#include "scip/scip_numerics.h"
#include "scip/scip_param.h"
#include "scip/scip_prob.h"
#include "scip/scip_sepa.h"
#include "scip/scip_sol.h"
#include "scip/scip_solvingstats.h"
#include "scip/scip_tree.h"
#include "scip/scip_var.h"
#include "scip/sepa_oddcycle.h"
 
 
#define SEPA_NAME              "oddcycle"
#define SEPA_DESC              "odd cycle separator"
#define SEPA_PRIORITY            -15000
#define SEPA_FREQ                    -1
#define SEPA_MAXBOUNDDIST           1.0
#define SEPA_USESSUBSCIP          FALSE      /**< does the separator use a secondary SCIP instance? */
#define SEPA_DELAY                FALSE      /**< should separation method be delayed, if other separators found cuts? */
 
 
/* default values for separator settings */
#define DEFAULT_SCALEFACTOR        1000      /**< factor for scaling of the arc-weights in the Dijkstra algorithm */
#define DEFAULT_USEGLS             TRUE      /**< use GLS method, otherwise HP method */
#define DEFAULT_LIFTODDCYCLES     FALSE      /**< lift odd cycle cuts */
#define DEFAULT_REPAIRCYCLES       TRUE      /**< try to repair violated cycles in which a variable and its negated appear */
#define DEFAULT_ADDSELFARCS        TRUE      /**< add links between a variable and its negated */
#define DEFAULT_INCLUDETRIANGLES   TRUE      /**< separate triangles (3-cliques) found as 3-cycles or repaired larger cycles */
#define DEFAULT_MULTIPLECUTS      FALSE      /**< still try variable as start, even if it is already covered by a cut */
#define DEFAULT_ALLOWMULTIPLECUTS  TRUE      /**< allow another inequality to use variable, even if it is already covered */
#define DEFAULT_LPLIFTCOEF        FALSE      /**< TRUE: choose lifting candidate with highest value of coefficient*lpvalue
                                              *   FALSE: choose lifting candidate with highest coefficient */
#define DEFAULT_RECALCLIFTCOEF     TRUE      /**< whether lifting coefficients should be recomputed */
#define DEFAULT_MAXSEPACUTS        5000      /**< maximal number of oddcycle cuts separated per separation round */
#define DEFAULT_MAXSEPACUTSROOT    5000      /**< maximal number of oddcycle cuts separated per separation round in root node */
#define DEFAULT_PERCENTTESTVARS       0      /**< percent of variables to try the chosen method on [0-100] */
#define DEFAULT_OFFSETTESTVARS      100      /**< offset of variables to try the chosen method on */
#define DEFAULT_MAXCUTSROOT           1      /**< maximal number of oddcycle cuts generated per root of the levelgraph */
#define DEFAULT_SORTSWITCH            3      /**< unsorted (0), maxlp (1), minlp (2), maxfrac (3), minfrac (4) */
#define DEFAULT_MAXREFERENCE          0      /**< minimal weight on an edge (in level graph or Dijkstra graph) */
#define DEFAULT_MAXROUNDS            10      /**< maximal number of rounds pre node */
#define DEFAULT_MAXROUNDSROOT        10      /**< maximal number of rounds in the root node */
#define DEFAULT_MAXNLEVELS           20      /**< maximal number of levels in level graph */
#define DEFAULT_MAXPERNODESLEVEL    100      /**< maximal percentage of nodes allowed in one level of the levelgraph [0-100] */
#define DEFAULT_OFFSETNODESLEVEL     10      /**< additional offset of nodes allowed in one level of the levelgraph */
#define DEFAULT_SORTROOTNEIGHBORS  TRUE      /**< sort neighbors of the root in the level graph */
#define DEFAULT_MAXCUTSLEVEL         50      /**< maximal number of cuts produced per level */
#define DEFAULT_MAXUNSUCESSFULL       3      /**< maximal number of unsuccessful calls at each node */
#define DEFAULT_CUTTHRESHOLD         -1      /**< maximal number of other cuts s.t. separation is applied (-1 for direct call) */
 
 
/*
 * Data structures
 */
 
/** Graph structure for level graph
 *
 *  This graph is tailored to the heuristic search for odd holes, @see separateHeur().
 *
 *  This undirected graph is represented by a directed graph with forward and backward arcs. Arcs are
 *  forward if they lead from a level l to level l+1, i.e., away from the root; backward arcs
 *  lead from a level l+1 to level l. This distinction enables a fast construction and search
 *  process. In the latter only forward or backward arcs have to be searched.
 *
 *  Target nodes and weights of the arcs incident to each node (adjacency lists) are stored
 *  consecutively in the arrays targetForward, targetBackward, weightForward, and weightBackward.
 *  The end of each list is marked by a -1 in targetForward and targetBackward.
 */
struct levelGraph
{
   unsigned int          nnodes;             /**< number of nodes */
   unsigned int          narcs;              /**< number of arcs */
   unsigned int          maxnodes;           /**< maximal number of nodes of the level graph */
   unsigned int          maxarcs;            /**< maximal number of arcs of the level graph */
   unsigned int          nlevels;            /**< number of levels completely inserted so far */
   unsigned int*         level;              /**< level number for each node */
   unsigned int          lastF;              /**< last storage element index in targetForward, weightForward - forward direction */
   unsigned int          lastB;              /**< last storage element index in targetBackward, weightBackward - backward direction */
   int*                  beginForward;       /**< forward adjacency list index in targetForward, weightForward for each node */
   int*                  beginBackward;      /**< backward adjacency list index in targetBackward, weightBackward for each node */
   int*                  targetForward;      /**< target nodes of forward arcs */
   int*                  targetBackward;     /**< target nodes of backward arcs */
   unsigned int*         weightForward;      /**< weights of forward arcs */
   unsigned int*         weightBackward;     /**< weights of backwards arcs */
   unsigned int          sizeForward;        /**< size of targetForward and weightForward */
   unsigned int          sizeBackward;       /**< size of targetBackward and weightBackward */
   int*                  beginAdj;           /**< index of list of arcs inside a level (in sourceAdj) for each node
                                              *   (the index points at the first arc starting from this node) */
   unsigned int*         sourceAdj;          /**< source nodes of arcs inside a level */
   unsigned int*         targetAdj;          /**< target nodes of arcs inside a level */
   unsigned int*         weightAdj;          /**< weights of arcs inside a level */
   unsigned int*         levelAdj;           /**< index of the first arc inside a given level */
   unsigned int          sizeAdj;            /**< size of sourceAdj, targetAdj and weightAdj */
};
 
typedef struct levelGraph LEVELGRAPH;
 
 
/** sorting type for starting node or root node iteration order
 *
 *  If the array should be sorted (1-4), the variable array is sorted every round by the chosen
 *  sorttype and the search method tries the nodes in order of the array.  If the array is used
 *  unsorted (0), the search methods tries the nodes in order of the array and stores the last
 *  processed start node or root node and continues from this position in the next separation round.
 */
enum sorttype
{
   UNSORTED              = 0,                /**< variable array is unsorted */
   MAXIMAL_LPVALUE       = 1,                /**< variable array is sorted by maximal lp-value */
   MINIMAL_LPVALUE       = 2,                /**< variable array is sorted by minimal fractionality */
   MAXIMAL_FRACTIONALITY = 3,                /**< variable array is sorted by maximal lp-value */
   MINIMAL_FRACTIONALITY = 4                 /**< variable array is sorted by minimal fractionality */
};
typedef enum sorttype SORTTYPE;
 
/** auxiliary data structure for passing graphs */
struct GraphData
{
   SCIP_Bool             usegls;             /**< Use GLS algorithm? If true, dijstragraph != NULL should hold, otherwise levelgraph != NULL */
   LEVELGRAPH*           levelgraph;         /**< level graph when using HP method, NULL otherwise */
   DIJKSTRA_GRAPH*       dijkstragraph;      /**< Dijkstra graph if using method by GLS, NULL otherwise */
};
typedef struct GraphData GRAPHDATA;
 
/** separator data */
struct SCIP_SepaData
{
   int                   scale;              /**< factor for scaling of the arc-weights */
   unsigned int          ncuts;              /**< number of cuts, added by the separator so far (in current and past calls) */
   unsigned int          oldncuts;           /**< number of cuts at the start the current separation round */
   int                   nliftedcuts;        /**< number of lifted cuts, added by the separator so far (in current and past calls) */
   SCIP_Bool             usegls;             /**< use GLS method, otherwise HP method */
   SCIP_Bool             multiplecuts;       /**< an odd cycle cut of length L can be generated L times; forbidding multiple cuts
                                              *   per node might be faster but might miss some cuts in the current round */
   SCIP_Bool             allowmultiplecuts;  /**< allow multiple cuts covering one node */
   SCIP_Bool             liftoddcycles;      /**< TRUE, iff we try to lift odd cycle inequalities */
   SCIP_Bool             addselfarcs;        /**< add arcs between the nodes of a variable and its negated; since not all implications
                                              *   are in the graph, this often finds more cycles */
   SCIP_Bool             repaircycles;       /**< if a variable and its negated appear in a cycle, we can repair the cycle
                                              *   by removing both and reconnecting the remaining nodes of the cycle */
   SCIP_Bool             includetriangles;   /**< handle triangles found as 3-cycles or repaired larger cycles */
   unsigned int*         mapping;            /**< mapping for getting the index of a variable in the sorted variable array */
   SCIP_Bool             lpliftcoef;         /**< TRUE: choose lifting candidate with highest value of coefficient*lpvalue
                                              *   FALSE: choose lifting candidate with highest coefficient */
   SCIP_Bool             recalcliftcoef;     /**< whether lifting coefficients should be recomputed */
   int                   maxsepacuts;        /**< max. number of oddcycle cuts separated per separation round */
   int                   maxsepacutsroot;    /**< max. number of oddcycle cuts separated per separation round in the root node */
   int                   maxsepacutsround;   /**< max. number of oddcycle cuts separated per separation round in the current node */
   SORTTYPE              sortswitch;         /**< sorted type: unsorted (0), maxlp (1), minlp (2), maxfrac (3), minfrac (4) */
   int                   lastroot;           /**< save root of last GLS-method run */
   SCIP_Bool             sortrootneighbors;  /**< sort neighbors of the root in the level graph */
   int                   percenttestvars;    /**< percentage of variables to try the chosen method on [0-100] */
   int                   offsettestvars;     /**< offset of variables to try the chosen method on */
   int                   maxpernodeslevel;   /**< percentage of nodes allowed in the same level of the level graph [0-100] */
   int                   offsetnodeslevel;   /**< additional offset of nodes allowed in one level of the levelgraph */
   unsigned int          maxlevelsize;       /**< maximal number of nodes allowed in the same level of the level graph */
   int                   maxcutsroot;        /**< maximal number of oddcycle cuts generated per root of the levelgraph */
   int                   maxcutslevel;       /**< maximal number of oddcycle cuts generated per level of the level graph */
   int                   maxrounds;          /**< maximal number of oddcycle separation rounds per node (-1: unlimited) */
   int                   maxroundsroot;      /**< maximal number of oddcycle separation rounds in the root node (-1: unlimited) */
   int                   maxreference;       /**< minimal weight on an edge (in level graph or Dijkstra graph) */
   int                   maxnlevels;         /**< maximal number of levels in level graph */
   int                   maxunsucessfull;    /**< maximal number of unsuccessful calls at each node */
   int                   nunsucessfull;      /**< number of unsuccessful calls at current node */
   int                   cutthreshold;       /**< maximal number of other cuts s.t. separation is applied (-1 for direct call) */
   SCIP_Longint          lastnode;           /**< number of last node */
};
 
 
/*
 * debugging methods
 */
 
#ifdef SCIP_OUTPUT
 
/** displays cycle of pred data structure w.r.t. variable names of the original problem (including
 *  status: original or negated node in graph)
 */
static
void printCycle(
   SCIP_VAR**            vars,               /**< problem variables */
   unsigned int*         pred,               /**< cycle stored as predecessor list */
   unsigned int          nbinvars,           /**< number of binary problem variables */
   unsigned int          startnode           /**< a node of the cycle */
   )
{
   unsigned int varsindex;
   unsigned int counter;
 
   assert(vars != NULL);
   assert(pred != NULL);
   assert(nbinvars > 0);
   assert(startnode < 4*nbinvars);
 
   counter = 0;
   varsindex = startnode;
 
   /* print start/end node */
   if( varsindex < nbinvars || ( varsindex >= 2*nbinvars && varsindex < 3*nbinvars ) )
   {
      SCIPdebugMsg(scip, "+ %s\n",SCIPvarGetName(vars[varsindex%nbinvars]));
   }
   else
   {
      SCIPdebugMsg(scip, "- %s\n",SCIPvarGetName(vars[varsindex%nbinvars]));
   }
 
   /* print inner nodes */
   for( varsindex = pred[startnode]; varsindex != startnode; varsindex = pred[varsindex] )
   {
      if( varsindex < nbinvars || ( varsindex >= 2*nbinvars && varsindex < 3*nbinvars ) )
      {
         SCIPdebugMsg(scip, "+ %s\n",SCIPvarGetName(vars[varsindex%nbinvars]));
      }
      else
      {
         SCIPdebugMsg(scip, "- %s\n",SCIPvarGetName(vars[varsindex%nbinvars]));
      }
      ++counter;
   }
 
   /* print start/end node */
   if( varsindex < nbinvars || ( varsindex >= 2*nbinvars && varsindex < 3*nbinvars ) )
   {
      SCIPdebugMsg(scip, "+ %s\n",SCIPvarGetName(vars[varsindex%nbinvars]));
   }
   else
   {
      SCIPdebugMsg(scip, "- %s\n",SCIPvarGetName(vars[varsindex%nbinvars]));
   }
 
   ++counter;
   SCIPdebugMsg(scip, "original cycle has %u variables.\n", counter);
}
#endif
 
 
/*
 * lifting methods
 */
 
/** using the level graph (if possible) or Dijkstra graph data structure (depending on the used
 *  method) we determine whether two nodes are adjacent
 */
static
SCIP_Bool isNeighbor(
   SCIP_VAR**            vars,               /**< problem variables */
   unsigned int          nbinvars,           /**< number of binary problem variables */
   GRAPHDATA*            graphdata,          /**< graph */
   unsigned int          a,                  /**< node index of first variable */
   unsigned int          b                   /**< node index of second variable */
   )
{
   unsigned int i;
 
   assert(vars != NULL);
   assert(nbinvars > 2);
   assert(graphdata != NULL);
   assert(graphdata->levelgraph != NULL || graphdata->usegls);
   assert(graphdata->dijkstragraph != NULL || ! graphdata->usegls);
   assert(a < 2*nbinvars);
   assert(b < 2*nbinvars);
   assert(a != b);
 
   /* determine adjacency using the Dijkstra graph */
   if( graphdata->usegls )
   {
      DIJKSTRA_GRAPH* dijkstragraph = graphdata->dijkstragraph;
      if( dijkstragraph->outcnt[a] == 0 || dijkstragraph->outcnt[b] == 0 )
         return FALSE;
 
      /* @todo later: if helpful: sort head and weight list once */
      for( i = dijkstragraph->outbeg[a]; i < dijkstragraph->outbeg[a] + dijkstragraph->outcnt[a]; ++i )
      {
         if( dijkstragraph->head[i] == b + 2*nbinvars )
            return TRUE;
      }
   }
   else    /* determine adjacency using the level graph */
   {
      LEVELGRAPH* levelgraph = graphdata->levelgraph;
 
      /* if a and b are contained in the level graph (with their arcs), we can check inside the level graph structure */
      if( (levelgraph->beginForward[a] != -1 || levelgraph->beginBackward[a] != -1)
         && (levelgraph->beginForward[b] != -1 || levelgraph->beginBackward[b] != -1) )
      {
         assert(levelgraph->level[a] <= levelgraph->nlevels);
         assert(levelgraph->level[b] <= levelgraph->nlevels);
 
         /* if a and b are not in neighbored levels or the same level, they cannot be adjacent */
         if( levelgraph->level[a] > levelgraph->level[b] + 1
            || levelgraph->level[b] > levelgraph->level[a] + 1 )
            return FALSE;
 
         assert(levelgraph->level[a] == levelgraph->level[b]
            || levelgraph->level[a]+1 == levelgraph->level[b]
            || levelgraph->level[a] == levelgraph->level[b]+1);
 
         /* first case of adjacent level */
         if( levelgraph->level[a] == levelgraph->level[b]+1 )
         {
            if( levelgraph->beginBackward[a] >= 0 )
            {
               i = (unsigned int) levelgraph->beginBackward[a];
               while( levelgraph->targetBackward[i] != -1 )
               {
                  if( levelgraph->targetBackward[i] == (int)b )
                     return TRUE;
                  ++i;
               }
            }
         }
         else if( levelgraph->level[a] == levelgraph->level[b]-1 )    /* second case of adjacent level */
         {
            if( levelgraph->beginForward[a] >= 0 )
            {
               i = (unsigned int) levelgraph->beginForward[a];
               while( levelgraph->targetForward[i] != -1 )
               {
                  if( levelgraph->targetForward[i] == (int)b )
                     return TRUE;
                  ++i;
               }
            }
         }
         else          /* same level (note that an edge between a and b is stored for a if a < b, otherwise it is stored for b) */
         {
            assert(levelgraph->level[a] == levelgraph->level[b]);
            assert(levelgraph->level[a] > 0); /* root has no neighbor in the same level */
 
            if( a < b && levelgraph->beginAdj[a] >= 0 )
            {
               i = (unsigned int) levelgraph->beginAdj[a];
               assert(i >= levelgraph->levelAdj[levelgraph->level[a]]);
 
               while( i < levelgraph->levelAdj[levelgraph->level[a]+1] && levelgraph->sourceAdj[i] == a )
               {
                  if( levelgraph->targetAdj[i] == b )
                     return TRUE;
 
                  /* if adjacency list ends we are done and a and b are not adjacent */
                  if( levelgraph->sourceAdj[i] == 0 && levelgraph->targetAdj[i] == 0 )
                     return FALSE;
 
                  assert(levelgraph->sourceAdj[i] < levelgraph->targetAdj[i]);
                  ++i;
               }
            }
            if( b < a && levelgraph->beginAdj[b] >= 0 )
            {
               i = (unsigned int) levelgraph->beginAdj[b];
               assert(i >= levelgraph->levelAdj[levelgraph->level[b]]);
 
               while( i < levelgraph->levelAdj[levelgraph->level[b]+1] && levelgraph->sourceAdj[i] == b )
               {
                  if( levelgraph->targetAdj[i] == a )
                     return TRUE;
 
                  /* if adjacency list ends we are done and a and b are not adjacent */
                  if( levelgraph->sourceAdj[i] == 0 && levelgraph->targetAdj[i] == 0 )
                     return FALSE;
 
                  assert(levelgraph->sourceAdj[i] < levelgraph->targetAdj[i]);
                  ++i;
               }
            }
         }
      }
      /* if a or b is not in the levels already completely inserted in the levelgraph, we check
       * their adjacency by the SCIP data structures
       */
      else
      {
         SCIP_CLIQUE** cliques;
         SCIP_VAR** cliquevars;
         SCIP_Bool* cliquevals;
         SCIP_Bool originala;
         SCIP_Bool originalb;
         unsigned int ncliques;
         unsigned int ncliquevars;
         unsigned int j;
 
         /* get original variables */
         originala = TRUE;
         if( a >= nbinvars )
         {
            a = a - nbinvars;
            originala = FALSE;
         }
         assert(a < nbinvars);
 
         originalb = TRUE;
         if( b >= nbinvars )
         {
            b = b - nbinvars;
            originalb = FALSE;
         }
         assert(b < nbinvars);
 
         /* nodes cannot be connected by trivial observations */
         if( SCIPvarGetNCliques(vars[a], originala) == 0 || SCIPvarGetNCliques(vars[b], originalb) == 0 )
            return FALSE;
 
         /* @todo later: possible improvement: do this test for implications and cliques separately if this here is time consuming */
         /* one of the nodes seems to have more arcs than the other, we swap them (since adjacency is symmetric) */
         if( SCIPvarGetNCliques(vars[a], originala) > SCIPvarGetNCliques(vars[b], originalb) )
         {
            unsigned int temp;
            SCIP_Bool varfixingtemp;
 
            temp = b;
            varfixingtemp = originalb;
            b = a;
            originalb = originala;
            a = temp;
            originala = varfixingtemp;
         }
 
         /* check whether a and b are contained in a clique */
         ncliques =  (unsigned int) SCIPvarGetNCliques(vars[a], originala);
         cliques = SCIPvarGetCliques(vars[a], originala);
 
         assert(cliques != NULL || ncliques == 0);
 
         for( i = 0; i < ncliques; ++i )
         {
            assert( cliques != NULL );  /* for lint */
            ncliquevars = (unsigned int) SCIPcliqueGetNVars(cliques[i]);
            cliquevars = SCIPcliqueGetVars(cliques[i]);
            cliquevals = SCIPcliqueGetValues(cliques[i]);
 
            assert(cliquevars != NULL || ncliquevars == 0);
            assert(cliquevals != NULL || ncliquevars == 0);
 
            for( j = 0; j < ncliquevars; ++j )
            {
               assert( cliquevals != NULL &&  cliquevars != NULL ); /* for lint */
               if( SCIPvarGetProbindex(vars[b]) == SCIPvarGetProbindex(cliquevars[j]) )
               {
                  if( (cliquevals[j] == FALSE && originalb == TRUE) || ( cliquevals[j] == TRUE && originalb == FALSE ) )
                     return TRUE;
               }
            }
         }
      }
   }
 
   return FALSE;
}
 
/** inside the lifting heuristic we determine the lifting coefficient by counting the length of
 *  chains adjacent to the lifting candidate.
 *
 *  since we have to exclude all chains adjacent to an already lifted node which is not adjacent to
 *  the current lifting candidate we check all chains of the cycle of length three and block them if
 *  they are adjacent.
 */
static
void checkBlocking(
   unsigned int          a,                  /**< first node of the checked cycle chain of length 3 */
   unsigned int          b,                  /**< second node of the checked cycle chain of length 3 */
   unsigned int          c,                  /**< third node of the checked cycle chain of length 3 */
   unsigned int          i,                  /**< current lifting candidate */
   unsigned int*         cycle,              /**< list of cycle nodes in order of the cycle */
   unsigned int          ncyclevars,         /**< number of variables in the odd cycle */
   SCIP_VAR**            vars,               /**< problem variables */
   unsigned int          nbinvars,           /**< number of binary problem variables */
   unsigned int*         lifted,             /**< list of lifted nodes */
   unsigned int*         nlifted,            /**< number of lifted nodes */
   GRAPHDATA*            graphdata,          /**< graph */
   SCIP_Bool*            myi                 /**< flag array, if cycle node is inner point of a counted chain */
   )
{
   unsigned int k;
 
   assert(a < ncyclevars);
   assert(b < ncyclevars);
   assert(c < ncyclevars);
   assert(cycle != NULL);
   assert(ncyclevars % 2 == 1);
   assert(ncyclevars > 2);
   assert(ncyclevars <= nbinvars);
   assert(vars != NULL);
   assert(nbinvars > 2);
   assert(lifted != NULL);
   assert(nlifted != NULL);
   assert(myi != NULL);
 
   k = 0;
   while( (myi[a] || myi[b] || myi[c]) && k < *nlifted )
   {
      /* if all three nodes are adjacent to a node which is already lifted and not adjacent with the
       * current lifting candidate, they cannot be regarded */
      if( !isNeighbor(vars, nbinvars, graphdata, i, lifted[k])
         && isNeighbor(vars, nbinvars, graphdata, cycle[a], lifted[k])
         && isNeighbor(vars, nbinvars, graphdata, cycle[b], lifted[k])
         && isNeighbor(vars, nbinvars, graphdata, cycle[c], lifted[k]) )
      {
         myi[a] = FALSE;
         myi[b] = FALSE;
         myi[c] = FALSE;
      }
      ++k;
   }
}
 
/** determine the heuristic lifting coefficient by counting the length of the adjacent chains of the
 *  candidate (we have to exclude all chains that are adjacent to an already lifted node which is
 *  not adjacent to the current candidate)
 */
static
unsigned int getCoef(
   SCIP*                 scip,               /**< SCIP data structure */
   unsigned int          i,                  /**< current lifting candidate */
   unsigned int*         cycle,              /**< list of cycle nodes in order of the cycle */
   unsigned int          ncyclevars,         /**< number of variables in the odd cycle */
   SCIP_VAR**            vars,               /**< problem variables */
   unsigned int          nbinvars,           /**< number of binary problem variables */
   unsigned int*         lifted,             /**< list of lifted nodes */
   unsigned int*         nlifted,            /**< number of lifted nodes */
   GRAPHDATA*            graphdata,          /**< graph data structure */
   SCIP_Bool*            myi                 /**< flag array, if cycle node is inner point of a counted chain */
   )
{
   int j;
   unsigned int k;
   unsigned int coef;                        /* coefficient of lifting candidate of the current step */
   unsigned int end;
 
   assert(scip != NULL);
   assert(i < 2*nbinvars);
   assert(cycle != NULL);
   assert(ncyclevars % 2 == 1);
   assert(ncyclevars > 2);
   assert(ncyclevars <= 2*nbinvars);
   assert(vars != NULL);
   assert(nbinvars > 2);
   assert(nlifted != NULL);
   assert(lifted != NULL);
 
   coef = 0;
 
   /* get inner nodes of adjacent chains in cycle */
   for( j = 1; j < (int)ncyclevars-1; ++j )
   {
      myi[j] = isNeighbor(vars, nbinvars, graphdata, i, cycle[j-1]) && isNeighbor(vars, nbinvars, graphdata, i, cycle[j])
         && isNeighbor(vars, nbinvars, graphdata, i, cycle[j+1]);
   }
 
   /* the first and last node of the cycle are treated separately */
   myi[0] = isNeighbor(vars, nbinvars, graphdata, i, cycle[ncyclevars-1])
      && isNeighbor(vars, nbinvars, graphdata, i, cycle[0])
      && isNeighbor(vars, nbinvars, graphdata, i, cycle[1]);
   myi[ncyclevars-1] = isNeighbor(vars, nbinvars, graphdata, i, cycle[ncyclevars-2])
      && isNeighbor(vars, nbinvars, graphdata, i, cycle[ncyclevars-1])
      && isNeighbor(vars, nbinvars, graphdata, i, cycle[0]);
 
   /* consider already lifted nodes that are not adjacent to current lifting candidate and
    * remove all inner cycle nodes that are adjacent to them
    */
   for( j = 1; j < (int)ncyclevars-1; ++j )
   {
      checkBlocking((unsigned int) (j-1), (unsigned int) j, (unsigned int) (j+1), i, cycle, ncyclevars, vars, nbinvars, lifted, nlifted, graphdata, myi);
   }
   checkBlocking(ncyclevars-2, ncyclevars-1, 0, i, cycle, ncyclevars, vars, nbinvars, lifted, nlifted, graphdata, myi);
   checkBlocking(ncyclevars-1, 0, 1, i, cycle, ncyclevars, vars, nbinvars, lifted, nlifted, graphdata, myi);
 
   /* calculate lifting coefficient */
   k = 0;
 
   /* first, handle the special case, that the first node of the cycle list is part of a chain */
   if( myi[0] )
   {
      ++k;
      end = ncyclevars-1;
      while( myi[end] && end > 0 )
      {
         ++k;
         --end;
      }
      assert(k == ncyclevars || end > 0);
 
      /* all cycle nodes build a relevant chain (maximal chain s.t. all inner nodes are in myi) */
      if( end == 0 )
      {
         assert(ncyclevars % 2 == 1);
         coef = (ncyclevars-1)/2;
         return coef;
      }
      assert(!myi[end]);
 
      /* current nonempty relevant chain cannot be extended */
      if( !myi[1] )
      {
         coef = (unsigned int) SCIPfloor(scip,(k+1.0)/2.0);
         assert(coef <= (ncyclevars-1)/2);
         k = 0;
      }
   }
   else
      end = ncyclevars;
 
   /* find remaining relevant chains */
   j = 1;
   while( j < (int)end )
   {
      /* skip all nodes that are not inner node */
      while( j<(int)end && ! myi[j] )
         ++j;
 
      /* collect all inner nodes (chain is extended) */
      while( j<(int)end && myi[j] )
      {
         ++k;
         ++j;
      }
 
      if( k > 0 )
      {
         assert(myi[j-1]);
         coef += (unsigned int) SCIPfloor(scip,(k+1.0)/2.0);
         assert(coef <= (ncyclevars-1)/2);
         k = 0;
      }
   }
 
   return coef;
}
 
/** Lifting Heuristic based on an idea by Alvarez-Valdes, Parreno, Tamarit
 *
 *  This method is based on the observation, that a non-cycle node can be lifted into the inequality
 *  with coefficient \f$1\f$ if the node is adjacent to the nodes of a 3-chain on the cycle.
 *
 *  The coefficient can be calculated as
 *  \f$\left\lfloor{\frac{|C|-1}{2}}\right\rfloor\f$
 *  where \f$C\f$ is the chain on the cycle.
 *
 *  If the node is connected to several chains, the coefficients of the chains can be summed up, resulting
 *  in a feasible lifting coefficient.
 *
 *  Additionally further variables can be lifted by considering chains connected to the additional lifting node
 *  which are not connected to already lifted nodes.
 *
 *  This method is a feasible heuristic which gives a valid lifted inequality.
 *  (Furthermore the first lifting coefficient is always smaller or equal to the largest possible lifting coefficient.)
 */
static
SCIP_RETCODE liftOddCycleCut(
   SCIP*                 scip,               /**< SCIP data structure */
   unsigned int*         nlifted,            /**< number of lifted variables */
   unsigned int*         lifted,             /**< indices of the lifted variables */
   unsigned int*         liftcoef,           /**< lifting coefficients */
   SCIP_SEPADATA*        sepadata,           /**< separator data structure */
   GRAPHDATA*            graphdata,          /**< graph */
   SCIP_VAR**            vars,               /**< problem variables */
   unsigned int          nbinvars,           /**< number of binary problem variables */
   unsigned int          startnode,          /**< a node of the cycle */
   unsigned int*         pred,               /**< predecessor of each node (original and negated) in odd cycle */
   unsigned int          ncyclevars,         /**< number of variables in the odd cycle */
   SCIP_Real*            vals,               /**< values of the variables in the given solution */
   SCIP_RESULT*          result              /**< pointer to store the result of the separation call */
   )
{
   unsigned int* cycle;                      /* storage for cycle and lifted nodes (and their coefficients) */
   unsigned int* coef;
   SCIP_Bool* candList;                      /* lifting candidate list */
   unsigned int i;
   unsigned int j;
   unsigned int negated;
   int bestcand;
   unsigned int liftround;
   SCIP_Bool* myi;
 
   assert(scip != NULL);
   assert(graphdata != NULL);
   assert(graphdata->levelgraph != NULL || graphdata->usegls);
   assert(graphdata->dijkstragraph != NULL || ! graphdata->usegls);
   assert(vars != NULL);
   assert(nbinvars > 2);
   assert(startnode < 2*nbinvars);
   assert(pred != NULL);
   assert(ncyclevars % 2 == 1);
   assert(ncyclevars > 2);
   assert(ncyclevars <= nbinvars);
   assert(result != NULL);
   assert(nlifted != NULL);
   assert(lifted != NULL);
   assert(liftcoef != NULL);
 
   /* allocate memory for cycle list */
   SCIP_CALL( SCIPallocBufferArray(scip, &cycle, (int) ncyclevars) );
 
   /* transform cycle from predecessor list to array in order of appearance in cycle */
   cycle[0] = startnode;
   j = 1;
   i = pred[startnode];
   while( i != startnode )
   {
      cycle[j] = i;
      i = pred[i];
      ++j;
   }
   assert(j == ncyclevars);
 
   /* allocate memory for coefficients of the lifting candidates (used in every step) */
   SCIP_CALL( SCIPallocBufferArray(scip, &coef, (int) (2*nbinvars)) );
 
   /* allocate memory candidate list and list of lifted nodes */
   SCIP_CALL( SCIPallocBufferArray(scip, &candList, (int) (2*nbinvars)) );
 
   /* allocate memory for counting of chains in getCoef() */
   SCIP_CALL( SCIPallocBufferArray(scip, &myi, (int) ncyclevars) );
 
   if( SCIPisStopped(scip) )
      goto TERMINATE;
 
   /* initialize candidate list */
   for( i = 0; i < 2*nbinvars; ++i )
      candList[i] = TRUE;
 
   /* remove cycle variables and their negated from candidate list */
   for( i = 0; i < ncyclevars; ++i )
   {
      candList[cycle[i]] = FALSE;
      if( cycle[i] >= nbinvars )
         negated = cycle[i] - nbinvars;
      else
         negated = cycle[i] + nbinvars;
      assert(negated < 2*nbinvars);
      candList[negated] = FALSE;
   }
 
   /* no candidates lifted so far */
   *nlifted = 0;
   bestcand = 0;
   liftround = 0;
 
   /* try lifting as long as we have lifting candidates */
   while( bestcand >= 0 )
   {
      /* in case we use a lifting rule, which does not require the first lifting coefficient of all variables: REMOVE this */
      if( sepadata->recalcliftcoef || liftround == 0 )
      {
         for( i = 0; i < 2*nbinvars; ++i )
         {
            if( candList[i] )
            {
               coef[i] = getCoef(scip, i, cycle, ncyclevars, vars, nbinvars, lifted, nlifted, graphdata, myi);
               assert(coef[i] <= (ncyclevars-1)/2);
               if( coef[i] < 1 )
                  candList[i] = FALSE;
            }
         }
      }
      ++liftround;
      bestcand = -1;
      for( i = 0; i < 2*nbinvars; ++i )
      {
         if( candList[i] )
         {
            /* we want to weight our choice of the lifting node by the value of the current lp solution */
            if( sepadata->lpliftcoef )
            {
               if( bestcand < 0 || coef[i]*vals[i] > coef[bestcand]*vals[bestcand] )
                  bestcand = (int) i;
            }
            /* we only regard the coefficient */
            else
            {
               if( bestcand < 0 || coef[i] > coef[bestcand] )
                  bestcand = (int) i;
            }
         }
      }
 
      /* there is at least one lifting variable */
      if( bestcand >= 0 )
      {
         if( !(sepadata->recalcliftcoef) )
            coef[i] = getCoef(scip, (unsigned int) bestcand, cycle, ncyclevars, vars, nbinvars, lifted, nlifted, graphdata, myi);
         assert(coef[bestcand] <= (ncyclevars-1)/2);
         candList[bestcand] = FALSE;
         if( coef[bestcand] > 0 )
         {
            if( bestcand >= (int)nbinvars )
               negated = (unsigned int) bestcand - nbinvars;
            else
               negated = (unsigned int) bestcand + nbinvars;
            assert(negated < 2*nbinvars);
 
            candList[negated] = FALSE;
 
            assert(*nlifted < nbinvars-ncyclevars);
            lifted[*nlifted] = (unsigned int) bestcand;
            liftcoef[*nlifted] = coef[bestcand];
            ++(*nlifted);
         }
      }
   }
 
 TERMINATE:
   /* free temporary memory */
   SCIPfreeBufferArray(scip, &myi);
   SCIPfreeBufferArray(scip, &candList);
   SCIPfreeBufferArray(scip, &coef);
   SCIPfreeBufferArray(scip, &cycle);
 
   return SCIP_OKAY;
}
 
 
/*
 * methods for both techniques
 */
 
/** add the inequality corresponding to the given odd cycle to the LP (if violated)
 *  after lifting it (if requested by user flag)
 */
static
SCIP_RETCODE generateOddCycleCut(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SEPA*            sepa,               /**< separator */
   SCIP_SOL*             sol,                /**< given primal solution */
   SCIP_VAR**            vars,               /**< problem variables */
   unsigned int          nbinvars,           /**< number of binary problem variables */
   unsigned int          startnode,          /**< a node of the cycle */
   unsigned int*         pred,               /**< predecessor of each node (original and negated) in odd cycle */
   unsigned int          ncyclevars,         /**< number of variables in the odd cycle */
   unsigned int*         incut,              /**< TRUE iff node is covered already by a cut */
   SCIP_Real*            vals,               /**< values of the variables in the given solution */
   SCIP_SEPADATA*        sepadata,           /**< separator data structure */
   GRAPHDATA*            graphdata,          /**< graph data structure */
   SCIP_RESULT*          result              /**< pointer to store the result of the separation call */
   )
{
   unsigned int i;
   unsigned int negatedcount;
   unsigned int negated;
 
   /* memory for lifting */
   unsigned int nlifted;   /* number of lifted variables */
   unsigned int* lifted;   /* index of the lifted variables */
   unsigned int* liftcoef; /* lifting coefficient */
 
   /* memory for cut generation */
   SCIP_ROW* cut;
   char cutname[SCIP_MAXSTRLEN];
 
   assert(scip != NULL);
   assert(vars != NULL);
   assert(startnode < 2*nbinvars);
   assert(pred != NULL);
   assert(ncyclevars % 2 == 1);
   assert(ncyclevars <= nbinvars);
   assert(incut != NULL);
   assert(graphdata != NULL);
   assert(graphdata->levelgraph != NULL || graphdata->usegls);
   assert(graphdata->dijkstragraph != NULL || ! graphdata->usegls);
   assert(result != NULL);
 
#ifdef SCIP_OUTPUT
   /* debug method that prints out all found cycles */
   printCycle(vars, pred, nbinvars, startnode);
#endif
 
   /* cycle contains only one node */
   if( ncyclevars < 3 )
   {
      SCIPdebugMsg(scip, "fixing variable\n");
      /* strengthening variable bounds due to single-variable-cycle */
      if( startnode < nbinvars )
      {
         SCIP_CALL( SCIPchgVarUb(scip, vars[startnode], 0.0) );
      }
      else
      {
         negated = startnode - nbinvars;
         assert(negated < nbinvars);
         SCIP_CALL( SCIPchgVarLb(scip, vars[negated], 1.0) );
      }
      *result = SCIP_REDUCEDDOM;
      return SCIP_OKAY;
   }
 
   /* cycle is a triangle (can be excluded by user) */
   if( ncyclevars < 5 && ! sepadata->includetriangles )
      return SCIP_OKAY;
 
   if( SCIPisStopped(scip) )
      return SCIP_OKAY;
 
   /* lift the cycle inequality */
   nlifted = 0;
   lifted = NULL;
   liftcoef = NULL;
   if( sepadata->liftoddcycles )
   {
      SCIP_CALL( SCIPallocBufferArray(scip, &lifted, (int) (nbinvars - ncyclevars)) );
      SCIP_CALL( SCIPallocBufferArray(scip, &liftcoef, (int) (nbinvars - ncyclevars)) );
      SCIP_CALL( liftOddCycleCut(scip, &nlifted, lifted, liftcoef, sepadata, graphdata, vars, nbinvars, startnode, pred, ncyclevars, vals, result) );
   }
   /* if we don't try to lift, we generate and add the cut as is */
 
   /* create cut */
   (void) SCIPsnprintf(cutname, SCIP_MAXSTRLEN, "oddcycle_%d", sepadata->ncuts);
   SCIP_CALL( SCIPcreateEmptyRowSepa(scip, &cut, sepa, cutname, -SCIPinfinity(scip), (ncyclevars-1)/2.0, FALSE, FALSE, TRUE) );
   SCIP_CALL( SCIPcacheRowExtensions(scip, cut) );
   negatedcount = 0;
 
   /* add variables of odd cycle to cut inequality */
   i = pred[startnode];
   while( i != startnode )
   {
      assert(i < 2*nbinvars);
      if( i < nbinvars )
      {
         /* inserting original variable */
         SCIP_CALL( SCIPaddVarToRow(scip, cut, vars[i], 1.0) );
         incut[i] = TRUE;
      }
      else
      {
         negated = i - nbinvars;
         assert(negated < nbinvars);
 
         /* inserting negated variable */
         SCIP_CALL( SCIPaddVarToRow(scip, cut, vars[negated], -1.0) );
         ++negatedcount;
         incut[negated] = TRUE;
      }
      i = pred[i];
   }
   assert(startnode == i);
 
   /* insert startnode */
   if( startnode < nbinvars )
   {
      /* inserting original variable */
      SCIP_CALL( SCIPaddVarToRow(scip, cut, vars[startnode], 1.0) );
      incut[startnode] = TRUE;
   }
   else
   {
      negated = startnode - nbinvars;
      assert(negated < nbinvars);
 
      /* inserting negated variable */
      SCIP_CALL( SCIPaddVarToRow(scip, cut, vars[negated], -1.0) );
      ++negatedcount;
      incut[negated] = TRUE;
   }
 
   /* add lifted variables to cut inequality (if existing) */
   for( i = 0; i < nlifted; ++i)
   {
      assert(lifted != NULL);
      assert(liftcoef != NULL);
      if( lifted[i] < nbinvars )
      {
         assert(vars[lifted[i]] != NULL);
         SCIP_CALL( SCIPaddVarToRow(scip, cut, vars[lifted[i]], (SCIP_Real) liftcoef[i]) );
      }
      else
      {
         negated = lifted[i] - nbinvars;
         assert(negated < nbinvars);
         assert(vars[negated] != NULL);
         SCIP_CALL( SCIPaddVarToRow(scip, cut, vars[negated], -1.0*liftcoef[i]) );
         negatedcount += liftcoef[i];
      }
   }
 
   /* modify right hand side corresponding to number of added negated variables */
   SCIP_CALL( SCIPchgRowRhs(scip, cut, SCIProwGetRhs(cut) - negatedcount) );
   SCIP_CALL( SCIPflushRowExtensions(scip, cut) );
 
   /* set cut rank: for oddcycle cuts we always set to 1 */
   SCIProwChgRank(cut, 1);
 
   /* not every odd cycle has to be violated due to incompleteness of the implication graph */
   if( SCIPisCutEfficacious(scip, sol, cut) )
   {
      SCIP_Bool infeasible;
 
      SCIP_CALL( SCIPaddRow(scip, cut, FALSE, &infeasible) );
      ++sepadata->ncuts;
      if ( nlifted > 0 )
         ++sepadata->nliftedcuts;
      if ( infeasible )
         *result = SCIP_CUTOFF;
      else
      {
         SCIP_CALL( SCIPaddPoolCut(scip, cut) );
 
         if( *result == SCIP_DIDNOTFIND )
            *result = SCIP_SEPARATED;
      }
 
#ifdef SCIP_OUTPUT
      SCIP_CALL( SCIPprintRow(scip, cut, NULL) );
#endif
 
      assert(*result == SCIP_CUTOFF || *result == SCIP_SEPARATED || *result == SCIP_REDUCEDDOM);
   }
 
   SCIP_CALL( SCIPreleaseRow(scip, &cut) );
 
   if( sepadata->liftoddcycles )
   {
      SCIPfreeBufferArray(scip, &liftcoef);
      SCIPfreeBufferArray(scip, &lifted);
   }
   return SCIP_OKAY;
}
 
/** check whether the given object is really a cycle without sub-cycles (sub-cycles may be
 *  calculated by the GLS algorithm in case there is no violated odd cycle inequality) and removes
 *  pairs of original and negated variables from the cycle
 */
static
SCIP_RETCODE cleanCycle(
   SCIP*                 scip,               /**< SCIP data structure */
   unsigned int*         pred,               /**< predecessor list of current cycle segment */
   SCIP_Bool*            incycle,            /**< flag array iff node is in cycle segment */
   unsigned int*         incut,              /**< flag array iff node is already covered by a cut */
   unsigned int          x,                  /**< index of current variable */
   unsigned int          startnode,          /**< index of first variable of cycle segment */
   unsigned int          nbinvars,           /**< number of binary problem variables */
   unsigned int*         ncyclevars,         /**< number of nodes in current cycle segment */
   SCIP_Bool             repaircycles,       /**< user flag if we should try to repair damaged cycles */
   SCIP_Bool             allowmultiplecuts,  /**< user flag if we allow multiple cuts per node */
   SCIP_Bool*            success             /**< FALSE iff an irreparable cycle appears */
   )
{
   unsigned int negx;
 
   assert(scip != NULL);
   assert(pred != NULL);
   assert(incycle != NULL);
   assert(incut != NULL);
   assert(ncyclevars != NULL);
   assert(*ncyclevars <= nbinvars);
   assert(success != NULL);
   assert(*success);
 
   assert(x < 2*nbinvars);
 
   /* skip variable if it is already covered by a cut and we do not allow multiple cuts per node */
   if( incut[x] && !allowmultiplecuts )
   {
      *success = FALSE;
      return SCIP_OKAY;
   }
 
   /* get index of negated variable of current variable */
   if( x < nbinvars )
      negx = x + nbinvars;
   else
      negx = x - nbinvars;
   assert(negx < 2*nbinvars);
 
   /* given object is not an odd cycle (contains sub-cycle) or contains original and negated
    * variable pair but we should not repair this
    */
   if( incycle[x] || (incycle[negx] && !repaircycles) )
   {
      *success = FALSE;
      return SCIP_OKAY;
   }
 
   /* cycle does not contain original and negated variable pair */
   if( !incycle[negx] )
   {
      assert(!incycle[x]);
      incycle[x] = TRUE;
      ++(*ncyclevars);
      return SCIP_OKAY;
   }
 
   /* delete original and negated variable and cross-link their neighbors the following way, if possible:
    * suppose the cycle contains segments:
    * startnode - ... - a - neg(x) - c1 - c2 - ... - cn-1 - cn - x - z=pred(x)
    *
    * because of the chain a - neg(x) - x - cn it holds that
    *   a=1 => x=0 => neg(x)=1 => cn=0 and
    *   cn=1 => x=0 => neg(x)=1 => a=0
    * because of the chain z - x - neg(x) - b it holds that
    *   z=1 => x=0 => neg(x)=1 => c1=0 and
    *   c1=1 => x=0 => neg(x)=1 => z=0
    *
    * in addition to that, in our linked list structure we need to relink the chain c1-...-cn in reverse order.
    * so we gain the order: a - cn - cn-1 - ... - c2 - c1 - z
    */
 
   /* if negated variable is first node in cycle,
    * cross-linking not possible because there is no successor z of neg(x) contained in cycle yet
    */
   if( negx == startnode )
   {
      *success = FALSE;
      return SCIP_OKAY;
   }
 
   /* if original and negated variable are neighbors, cross linking is not possible,
    * but x and neg(x) can simply be removed
    * a - neg(x)=pred[a] - x=pred[neg(x)] - z=pred[x] --> a - z=pred[x]=:pred[a]
    */
   if( pred[negx] == x )
   {
      unsigned int a;
 
      /* find a */
      a = startnode;
      while( pred[a] != negx )
         a = pred[a];
 
      /* link a and z */
      pred[a] = pred[x];
   }
   /* cross linking as mentioned above */
   else
   {
      unsigned int a;
      unsigned int z;
 
      /* memory for chain reverse */
      unsigned int* chain;
      unsigned int nchain;
 
      unsigned int i;
 
      /* allocate temporary memory */
      SCIP_CALL( SCIPallocBufferArray(scip, &chain, (int) *ncyclevars) );
 
      /* find and store a */
      a = startnode;
      while( pred[a] != negx )
         a = pred[a];
 
      /* store chain */
      i = pred[negx];
      nchain = 0;
      while( i != x )
      {
         chain[nchain] = i;
         ++nchain;
         i = pred[i];
      }
      assert(nchain > 0);
 
      /* store z */
      z = pred[x];
 
      /* link a and c1 */
      pred[a] = chain[nchain-1];
 
      /* link cn and z */
      pred[chain[0]] = z;
 
      /* reverse the chain */
      for( i = nchain-1; i > 0; --i )
         pred[chain[i]] = chain[i-1];
 
      /* free temporary memory */
      SCIPfreeBufferArray(scip, &chain);
   }
 
   /* remove negated variable from cycle */
   assert(!incycle[x] && incycle[negx]);
   incycle[negx] = FALSE;
   --(*ncyclevars);
 
   return SCIP_OKAY;
}
 
 
/*
 * methods for separateHeur()
 */
 
/** memory reallocation method (the graph is normally very dense, so we dynamically allocate only the memory we need)
 *
 *  Since the array sizes differ the method can be called for each of the three data structure types:
 *  - Forward: sizeForward, targetForward, weightForward
 *  - Backward: sizeBackward, targetBackward, weightBackward
 *  - Adj (inner level edges): sizeAdj, sourceAdj, targetAdj, weightAdj
 */
static
SCIP_RETCODE checkArraySizesHeur(
   SCIP*                 scip,               /**< SCIP data structure */
   LEVELGRAPH*           graph,              /**< LEVELGRAPH data structure */
   unsigned int*         size,               /**< given size */
   int**                 targetArray,        /**< given target array (or NULL if sourceAdjArray and targetAdjArray given) */
   unsigned int**        weightArray,        /**< given weight array */
   unsigned int**        sourceAdjArray,     /**< given sourceAdj array (or NULL if targetArray given) */
   unsigned int**        targetAdjArray,     /**< given targetAdj array (or NULL if targetArray given) */
   SCIP_Bool*            success             /**< FALSE, iff memory reallocation fails */
   )
{
   SCIP_Real memorylimit;
   unsigned int additional;
   SCIP_Bool avoidmemout;
 
   assert(scip != NULL);
   assert(graph != NULL);
   assert(size != NULL);
   assert(targetArray != NULL || (sourceAdjArray != NULL && targetAdjArray != NULL));
   assert(weightArray != NULL);
   assert(success != NULL);
 
   SCIPdebugMsg(scip, "reallocating...\n");
 
   additional = MIN(graph->maxarcs + graph->maxnodes - *size, *size) * ((int) sizeof(**weightArray));
   if( targetArray != NULL )
   {
      additional += MIN(graph->maxarcs + graph->maxnodes - *size, *size) * ((int) sizeof(**targetArray));
   }
   else
   {
      additional += MIN(graph->maxarcs + graph->maxnodes - *size, *size) * ((int) sizeof(**sourceAdjArray));
      additional += MIN(graph->maxarcs + graph->maxnodes - *size, *size) * ((int) sizeof(**targetAdjArray));
   }
 
   SCIP_CALL( SCIPgetRealParam(scip, "limits/memory", &memorylimit) );
   if( !SCIPisInfinity(scip, memorylimit) )
   {
      memorylimit -= SCIPgetMemUsed(scip)/1048576.0;
      memorylimit -= SCIPgetMemExternEstim(scip)/1048576.0;
   }
 
   SCIP_CALL( SCIPgetBoolParam(scip, "misc/avoidmemout", &avoidmemout) );
   /* if memorylimit would be exceeded or any other limit is reached free all data and exit */
   if( (avoidmemout && memorylimit <= additional/1048576.0) || SCIPisStopped(scip) )
   {
      *success = FALSE;
      SCIPdebugMsg(scip, "...memory limit exceeded\n");
      return SCIP_OKAY;
   }
 
   *size = 2 * (*size);
 
   SCIP_CALL( SCIPreallocBufferArray(scip, weightArray, (int) MIN(graph->maxarcs + graph->maxnodes, *size)) );
   if( targetArray != NULL )
   {
      SCIP_CALL( SCIPreallocBufferArray(scip, targetArray, (int) MIN(graph->maxarcs + graph->maxnodes, *size)) );
   }
   else
   {
      assert(sourceAdjArray != NULL);
      assert(targetAdjArray != NULL);
      SCIP_CALL( SCIPreallocBufferArray(scip, sourceAdjArray, (int) MIN(graph->maxarcs, *size)) );
      SCIP_CALL( SCIPreallocBufferArray(scip, targetAdjArray, (int) MIN(graph->maxarcs, *size)) );
   }
 
   /* if memorylimit is exceeded free all data and exit */
   SCIP_CALL( SCIPgetRealParam(scip, "limits/memory", &memorylimit) );
   if( !SCIPisInfinity(scip, memorylimit) )
   {
      memorylimit -= SCIPgetMemUsed(scip)/1048576.0;
      memorylimit -= SCIPgetMemExternEstim(scip)/1048576.0;
   }
 
   if( avoidmemout && memorylimit <= 2.0*SCIPgetMemExternEstim(scip)/1048576.0 )
   {
      *success = FALSE;
      SCIPdebugMsg(scip, "...memory limit exceeded\n");
      return SCIP_OKAY;
   }
 
   SCIPdebugMsg(scip, "...with success\n");
 
   return SCIP_OKAY;
}
 
/** Add arc to level graph */
static
SCIP_RETCODE addArc(
   SCIP*                 scip,               /**< SCIP data structure */
   LEVELGRAPH*           graph,              /**< LEVELGRAPH data structure */
   unsigned int          u,                  /**< source node */
   unsigned int          v,                  /**< target node */
   unsigned int          level,              /**< number of current level */
   unsigned int          weight,             /**< weight of the arc */
   unsigned int*         nAdj,               /**< array of numbers of arcs inside levels */
   SCIP_Bool*            success             /**< FALSE, iff memory reallocation fails */
   )
{
   /* arc is a forward arc */
   if( graph->level[v] == level+1 )
   {
      graph->targetForward[graph->lastF] = (int) v;
      graph->weightForward[graph->lastF] = weight;
      ++(graph->lastF);
      ++(graph->narcs);
      if( graph->lastF == graph->sizeForward )
      {
         SCIP_CALL( checkArraySizesHeur(scip, graph, &(graph->sizeForward), &(graph->targetForward),
               &(graph->weightForward), NULL, NULL, success) );
         if( !(*success) )
            return SCIP_OKAY;
      }
   }
   else
   {
      assert(graph->level[v] == level || graph->level[v] == level-1);
 
      /* arc is a backward arc */
      if( graph->level[v] == level-1 )
      {
         graph->targetBackward[graph->lastB] = (int) v;
         graph->weightBackward[graph->lastB] = weight;
         ++(graph->lastB);
         ++(graph->narcs);
 
         if( graph->lastB == graph->sizeBackward )
         {
            SCIP_CALL( checkArraySizesHeur(scip, graph, &(graph->sizeBackward), &(graph->targetBackward),
                  &(graph->weightBackward), NULL, NULL, success) );
            if( !(*success) )
               return SCIP_OKAY;
         }
      }
      else       /* arc is in the same level */
      {
         assert(graph->level[v] == level);
 
         /* add arc only once, i.e., if u < v */
         if( u < v )
         {
            graph->sourceAdj[graph->levelAdj[level+1]+*nAdj] = u;
            graph->targetAdj[graph->levelAdj[level+1]+*nAdj] = v;
            graph->weightAdj[graph->levelAdj[level+1]+*nAdj] = weight;
            ++(*nAdj);
            ++(graph->narcs);
 
            if( graph->levelAdj[level+1]+*nAdj == graph->sizeAdj )
            {
               SCIP_CALL( checkArraySizesHeur(scip, graph, &(graph->sizeAdj), NULL, &(graph->weightAdj),
                     &(graph->sourceAdj), &(graph->targetAdj), success) );
               if( !(*success) )
                  return SCIP_OKAY;
            }
         }
      }
   }
   return SCIP_OKAY;
}
 
/** add implications from cliques of the given node u
 *
 *  @see createNextLevel()
 */
static
SCIP_RETCODE addNextLevelCliques(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SEPADATA*        sepadata,           /**< separator data structure */
   SCIP_VAR**            vars,               /**< problem variables */
   SCIP_Real*            vals,               /**< values of the binary variables in the current LP relaxation */
   unsigned int          u,                  /**< current node */
   LEVELGRAPH*           graph,              /**< LEVELGRAPH data structure */
   unsigned int          level,              /**< number of current level */
   SCIP_Bool*            inlevelgraph,       /**< flag array if node is already inserted in level graph */
   unsigned int*         newlevel,           /**< array of nodes of the next level */
   unsigned int*         nnewlevel,          /**< number of nodes of the next level */
   unsigned int*         nAdj,               /**< array of numbers of arcs inside levels */
   SCIP_Bool*            success             /**< FALSE, iff memory reallocation fails */
   )
{
   SCIP_Bool varfixing;
   unsigned int ncliques;
   unsigned int nbinvars;
   unsigned int varsidx;
   SCIP_CLIQUE** cliques;
   unsigned int ncliquevars;
   SCIP_VAR** cliquevars;
   SCIP_Bool* cliquevals;
   unsigned int j;
   unsigned int k;
 
   assert(scip != NULL);
   assert(vars != NULL);
   assert(vals != NULL);
   assert(graph != NULL);
   assert(graph->targetForward != NULL);
   assert(graph->weightForward != NULL);
   assert(graph->targetBackward != NULL);
   assert(graph->weightBackward != NULL);
   assert(graph->sourceAdj != NULL);
   assert(graph->targetAdj != NULL);
   assert(graph->weightAdj != NULL);
   assert(inlevelgraph != NULL);
   assert(newlevel != NULL);
   assert(nnewlevel != NULL);
   assert(nAdj != NULL);
   assert(success != NULL);
 
   assert(u < graph->maxnodes);
 
   nbinvars = (graph->maxnodes)/2;
 
   /* current node signifies a problem variable */
   if( u < nbinvars )
   {
      varfixing = TRUE;
      varsidx = u;
   }
   /* current node signifies a negated variable */
   else
   {
      varfixing = FALSE;
      varsidx = u - nbinvars;
   }
   assert(varsidx < nbinvars);
   assert(!SCIPisFeasIntegral(scip, vals[varsidx]));
 
   /* get cliques of the current variable */
   ncliques = (unsigned int) SCIPvarGetNCliques(vars[varsidx], varfixing);
   if( ncliques == 0 )
      return SCIP_OKAY;
 
   cliques = SCIPvarGetCliques(vars[varsidx], varfixing);
   assert(cliques != NULL);
 
   for( j = 0; j < ncliques; ++j )
   {
      ncliquevars = (unsigned int) SCIPcliqueGetNVars(cliques[j]);
      cliquevars = SCIPcliqueGetVars(cliques[j]);
      cliquevals = SCIPcliqueGetValues(cliques[j]);
 
      assert(cliquevars != NULL || ncliquevars == 0);
      assert(cliquevals != NULL || ncliquevars == 0);
 
      for( k = 0; k < ncliquevars; ++k )
      {
         unsigned int l;
         unsigned int v;
         unsigned int weight;
 
         assert( cliquevars != NULL && cliquevals != NULL );  /* for lint */
 
         l = sepadata->mapping[SCIPvarGetProbindex(cliquevars[k])];
         assert(l < nbinvars);
 
         /* skip integral neighbors */
         if( SCIPisFeasIntegral(scip, vals[l]) )
            continue;
 
         /* consider clique with negated variable (x = 1 -> y >= 1 <=>  x = 1 -> neg(y) <= 0) */
         if( cliquevals[k] == FALSE )
            v = l + nbinvars;
         /* x = 1 -> y <= 0 */
         else
            v = l;
         assert(v < graph->maxnodes);
 
         /* if variable is a new node, it will be assigned to the next level,
          * but if the level contains more nodes than allowed
          * (defined by percent per level plus offset),
          * we skip the rest of the nodes
          */
         if( !inlevelgraph[v] && (*nnewlevel) <= sepadata->maxlevelsize )
         {
            ++(graph->nnodes);
            graph->level[v] = level+1;
            inlevelgraph[v] = TRUE;
            newlevel[*nnewlevel] = v;
            ++(*nnewlevel);
         }
         assert(*nnewlevel > sepadata->maxlevelsize || inlevelgraph[v]);
 
         /* calculate arc weight and add arc, if the neighbor node is on the same or a neighbor level */
         if( inlevelgraph[v] && (graph->level[v] == level+1 || graph->level[v] == level || graph->level[v] == level-1))
         {
            int tmp;
 
            /* the computation of 1.0 - vals[v] if v is negated is ensured by the fact that v > nbinvars in this case */
            /* set weight of arc (x,y) to 1 - x* -y* */
            if( varfixing )
            {
               /* x = 1 -> y <= 0  or  y >= 1 */
               tmp = (int) SCIPfeasCeil(scip, sepadata->scale * (1 - vals[varsidx] - vals[v]));
               weight = (unsigned int) MAX(tmp, sepadata->maxreference);
            }
            else
            {
               /* x = 0 <-> neg(x) = 1 -> y <= 0  or  y >= 1 */
               tmp = (int) SCIPfeasCeil(scip, sepadata->scale * (1.0 - (1.0 - vals[varsidx]) - vals[v]));
               weight = (unsigned int) MAX(tmp, sepadata->maxreference);
            }
 
            /* add arc from current to neighbor node */
            SCIP_CALL( addArc(scip, graph, u, v, level, weight, nAdj, success) );
            if( !(*success) )
               return SCIP_OKAY;
         }
      }
   }
   return SCIP_OKAY;
}
 
 
/** sort level of root neighbors
 *
 *  If we limit the size of nodes of a level, we want to add the best neighbors to the next level.
 *  Since sorting every level is too expensive, we sort the neighbors of the root (if requested).
 *
 *  Create the first level as follows:
 *  - create flag array for binary variables and their negated and set their values FALSE
 *  - iterate over the implication and clique neighbors of the root and set their flag array values to TRUE
 *  - create variable array and insert all variables with flag value TRUE
 *  - sort variable array by maximal fractionality
 *  - add variables from sorted array to levelgraph until first level is full (or all variables are inserted)
 *
 *  Even inserting all variables might help for the following creation of further levels since the neighbors
 *  of nodes with high fractionality often have high fractionalities themselves and would be inserted first
 *  when further levels would have been sorted (which actually is not the case).
 */
static
SCIP_RETCODE insertSortedRootNeighbors(
   SCIP*                 scip,               /**< SCIP data structure */
   LEVELGRAPH*           graph,              /**< LEVELGRAPH data structure */
   unsigned int          nbinvars,           /**< number of binary problem variables */
   unsigned int          ncurlevel,          /**< number of nodes of the current level */
   unsigned int          u,                  /**< source node */
   SCIP_Real*            vals,               /**< values of the binary variables in the current LP relaxation */
   SCIP_VAR**            vars,               /**< problem variables */
   SCIP_SEPADATA*        sepadata,           /**< separator data structure */
   unsigned int*         nnewlevel,          /**< number of nodes of the next level */
   SCIP_Bool*            inlevelgraph,       /**< nodes in new graph corr. to old graph (-1 if unassigned) */
   unsigned int          level,              /**< number of current level */
   unsigned int*         newlevel,           /**< array of nodes of the next level */
   SCIP_Bool*            success             /**< FALSE, iff memory reallocation fails */
   )
{
   /* storage for the neighbors of the root */
   unsigned int root;
   unsigned int nneighbors;
   SCIP_Bool* isneighbor;
   int* neighbors;
   SCIP_Real* sortvals;
 
   SCIP_Bool varfixing;
   unsigned int varsidx;
 
   /* storage for cliques to the neighbors of the root node */
   unsigned int ncliques;
   SCIP_CLIQUE** cliques;
   unsigned int ncliquevars;
   SCIP_VAR** cliquevars;
   SCIP_Bool* cliquevals;
 
   unsigned int j;
   unsigned int k;
   unsigned int v;
 
   /* allocate flag array for neighbor detection */
   SCIP_CALL( SCIPallocBufferArray(scip, &isneighbor, (int) graph->maxnodes) );
   BMSclearMemoryArray(isneighbor, graph->maxnodes);
 
   nbinvars = (graph->maxnodes)/2;
 
   assert(ncurlevel == 1);
   root = u;
 
   /* current node signifies a problem variable */
   if( root < nbinvars )
   {
      varfixing = TRUE;
      varsidx = root;
   }
   /* current node signifies a negated variable */
   else
   {
      varfixing = FALSE;
      varsidx = root - nbinvars;
   }
   assert(varsidx < nbinvars);
   assert(! SCIPisFeasIntegral(scip, vals[varsidx]));
   nneighbors = 0;
 
   /* count cliques of the root */
   ncliques = (unsigned int) SCIPvarGetNCliques(vars[varsidx], varfixing);
   if( ncliques > 0 )
   {
      cliques = SCIPvarGetCliques(vars[varsidx], varfixing);
      assert(cliques != NULL);
 
      for( j = 0; j < ncliques; ++j )
      {
         ncliquevars = (unsigned int) SCIPcliqueGetNVars(cliques[j]);
         cliquevars = SCIPcliqueGetVars(cliques[j]);
         cliquevals = SCIPcliqueGetValues(cliques[j]);
 
         assert(cliquevars != NULL || ncliquevars == 0);
         assert(cliquevals != NULL || ncliquevars == 0);
 
         for( k = 0; k < ncliquevars; ++k )
         {
            unsigned int kidx;
 
            assert( cliquevars != NULL && cliquevals != NULL ); /* for lint */
 
            kidx = sepadata->mapping[SCIPvarGetProbindex(cliquevars[k])];
            assert(kidx < nbinvars);
 
            /* skip root */
            if( kidx == varsidx )
               continue;
 
            /* skip integral neighbors */
            if( SCIPisFeasIntegral(scip, vals[kidx]))
               continue;
 
            if( cliquevals[k] == TRUE )
            {
               if ( ! isneighbor[kidx] )
               {
                  ++nneighbors;
                  isneighbor[kidx] = TRUE;
               }
            }
            else
            {
               assert(cliquevals[k] == FALSE);
               if ( ! isneighbor[kidx + nbinvars] )
               {
                  ++nneighbors;
                  isneighbor[kidx+nbinvars] = TRUE;
               }
            }
         }
      }
   }
 
   /* root cannot be part of the next level */
   assert(! isneighbor[root]);
 
   /* allocate memory for sorting of root neighbors */
   SCIP_CALL( SCIPallocBufferArray(scip, &neighbors, (int) nneighbors) );
   SCIP_CALL( SCIPallocBufferArray(scip, &sortvals, (int) nneighbors) );
 
   k = 0;
   for( j = 0; j < graph->maxnodes; ++j )
   {
      if( isneighbor[j] )
      {
         assert(j != root);
         assert(!SCIPisFeasIntegral(scip, vals[j]));
 
         neighbors[k] = (int) j;
         sortvals[k] = MIN(1.0 - vals[j], vals[j]);
         ++k;
      }
   }
   assert(k == nneighbors);
 
   /* sort neighbors by fractionality */
   SCIPsortDownRealInt(sortvals, neighbors, (int) nneighbors);
 
   /* free temporary memory */
   SCIPfreeBufferArray(scip, &sortvals);
 
   /* insert sorted neighbors until level size limit is reached (or all neighbors are inserted) */
   for( j = 0; j < nneighbors && (*nnewlevel) <= sepadata->maxlevelsize; ++j )
   {
      int tmp;
 
      v = (unsigned int) neighbors[j];
      assert( v < 2 * nbinvars );
 
      /* only the root is contained in the levelgraph */
      assert(! inlevelgraph[v] || v == root+nbinvars || v == root-nbinvars);
 
      /* insert neighbor into levelgraph */
      ++(graph->nnodes);
      graph->level[v] = level + 1;
      inlevelgraph[v] = TRUE;
      newlevel[*nnewlevel] = v;
      ++(*nnewlevel);
 
      assert(! SCIPisFeasIntegral(scip, vals[varsidx]));
      assert(! SCIPisFeasIntegral(scip, vals[v]));
 
      graph->targetForward[graph->lastF] = (int) v;
      /* the computation of 1.0 - vals[v] if v is negated is ensured by the fact that v > nbinvars in this case */
      if( varfixing )
      {
         tmp = (int) SCIPfeasCeil(scip, sepadata->scale * (1.0 - vals[varsidx] - vals[v]));
         graph->weightForward[graph->lastF] = (unsigned int) MAX(tmp, sepadata->maxreference);
      }
      else
      {
         assert( ! varfixing );
         tmp = (int) SCIPfeasCeil(scip, sepadata->scale * (1.0 - (1.0 - vals[varsidx]) - vals[v]));
         graph->weightForward[graph->lastF] = (unsigned int) MAX(tmp, sepadata->maxreference);
      }
      ++(graph->lastF);
      ++(graph->narcs);
      if( graph->lastF == graph->sizeForward )
      {
         SCIP_CALL( checkArraySizesHeur(scip, graph, &(graph->sizeForward), &(graph->targetForward),
               &(graph->weightForward), NULL, NULL, success) );
 
         if( !(*success) )
            break;
      }
   }
 
   /* free temporary memory */
   SCIPfreeBufferArray(scip, &neighbors);
   SCIPfreeBufferArray(scip, &isneighbor);
 
   return SCIP_OKAY;
}
 
/** Find shortest path from start node to root
 *
 *  We perform a BFS to find the shortest path to the root. D stores the distance to the start
 *  node, P stores the partent nodes in the shortest path tree (-1 if node has not been reached).
 */
static
SCIP_RETCODE findShortestPathToRoot(
   SCIP*                 scip,               /**< SCIP data structure */
   int                   scale,              /**< scaling factor for edge weights */
   LEVELGRAPH*           graph,              /**< LEVELGRAPH data structure */
   unsigned int          startnode,          /**< start node for path search */
   unsigned int*         distance,           /**< distances of searched nodes from root */
   unsigned int*         queue,              /**< node queue for path search */
   SCIP_Bool*            inQueue,            /**< whether node is in the queue */
   int*                  parentTree          /**< parent tree (-1 if no parent) */
   )
{
   unsigned int i;
   int startQueue;
   int endQueue;
   unsigned int u;
   int v;
   unsigned int d;
 
   assert(scip != NULL);
   assert(graph != NULL);
   assert(graph->beginBackward != NULL);
   assert(graph->targetBackward != NULL);
   assert(graph->weightBackward != NULL);
   assert(distance != NULL);
   assert(queue != NULL);
   assert(inQueue != NULL);
   assert(parentTree != NULL);
   assert(scale >= 0);
 
   /* initialize distances */
   for( i = 0; i < graph->maxnodes; ++i )
   {
      distance[i] = 2 * (graph->nnodes) * (unsigned) scale;
      parentTree[i] = -1;
      inQueue[i] = FALSE;
   }
   distance[startnode] = 0;
 
   /* initialize queue */
   startQueue = 0;
   endQueue = 0;
   queue[0] = startnode;
 
   /* as long as queue is not empty */
   while( startQueue <= endQueue )
   {
      /* pop first node from queue */
      u = queue[startQueue];
      ++startQueue;
 
      /* check adjacent nodes */
      assert(graph->beginBackward[u] >= 0);
      i = (unsigned int) graph->beginBackward[u];
      for( v = graph->targetBackward[i]; v >= 0; v = graph->targetBackward[++i] )
      {
         /* distance to u via current arc: */
         d = distance[u] + graph->weightBackward[i];
 
         /* if we found a shorter connection */
         if( d < distance[v] )
         {
            distance[v] = d;
            parentTree[v] = (int) u;
 
            /* insert in queue if not already present */
            if( !inQueue[v] )
            {
               ++endQueue;
               queue[endQueue] = (unsigned int) v;
               inQueue[v] = TRUE;
            }
         }
      }
      /* it is not necessary to stop if we found the root (in this case there are no arcs left) and we stop anyway */
   }
   assert(parentTree[u] != -1);
 
   return SCIP_OKAY;
}
 
 
/** Block shortest path
 *
 *  We traverse the shortest path found by findShortestPathToRoot() and block all neighbors (in the
 *  original graph) of nodes in the path, i.e., we set blocked to TRUE. We do not block neighbors of
 *  the root node, since they have to be used. For the start node we only block nodes on the
 *  previous layers,
 *
 *  @see findShortestPathToRoot()
 */
static
SCIP_RETCODE blockRootPath(
   SCIP*                 scip,               /**< SCIP data structure */
   LEVELGRAPH*           graph,              /**< LEVELGRAPH data structure */
   unsigned int          startnode,          /**< start node */
   SCIP_Bool*            inlevelgraph,       /**< nodes in new graph corr. to old graph (-1 if unassigned) */
   SCIP_Bool*            blocked,            /**< whether node is blocked */
   int*                  parentTree,         /**< parent tree */
   unsigned int          root                /**< root of the current level graph */
   )
{
   unsigned int u;
   unsigned int i;
   int v;
 
   assert(scip != NULL);
   assert(graph != NULL);
   assert(graph->level != NULL);
   assert(graph->beginForward != NULL);
   assert(graph->targetForward != NULL);
   assert(graph->beginBackward != NULL);
   assert(graph->targetBackward != NULL);
   assert(graph->sourceAdj != NULL);
   assert(graph->targetAdj != NULL);
   assert(inlevelgraph != NULL);
   assert(blocked != NULL);
   assert(parentTree != NULL);
 
   assert(parentTree[root] >= 0);
 
   /* follow the path from the predecessor of root to the start node and block all neighbors */
   u = (unsigned int) parentTree[root];
   while( u != startnode )
   {
      /*  block neighbors of u in higher level */
      i = (unsigned int) graph->beginForward[u];
      for( v = graph->targetForward[i]; v >= 0; v = graph->targetForward[++i] )
      {
         assert(inlevelgraph[v]);
         blocked[v] = TRUE;
      }
 
      /*  block neighbors of u in lower level */
      i = (unsigned int) graph->beginBackward[u];
      for( v = graph->targetBackward[i]; v >= 0; v = graph->targetBackward[++i] )
      {
         assert(inlevelgraph[v]);
         blocked[v] = TRUE;
      }
 
      /*  block neighbors of u in same level */
      assert(graph->level[u] > 0);
      for( i = graph->levelAdj[graph->level[u]]; i < graph->levelAdj[graph->level[u]+1]; ++i )
      {
         assert(graph->sourceAdj[i] < graph->targetAdj[i]);
         assert(graph->level[graph->sourceAdj[i]] == graph->level[graph->targetAdj[i]]);
 
         /* remember that these arcs are only stored for one direction */
         if( graph->sourceAdj[i] == u )
         {
            blocked[graph->targetAdj[i]] = TRUE;
         }
         if( graph->targetAdj[i] == u )
         {
            blocked[graph->sourceAdj[i]] = TRUE;
         }
      }
 
      /* get next node on the path */
      u = (unsigned int) parentTree[u];
   }
   assert(u == startnode);
 
   /* block nodes adjacent to start node on previous level */
   assert(graph->beginBackward[u] > 0);
   i = (unsigned int) graph->beginBackward[u];
   for( v = graph->targetBackward[i]; v >= 0; v = graph->targetBackward[++i] )
      blocked[v] = TRUE;
 
   return SCIP_OKAY;
}
 
 
/** Find shortest path from root to target node
 *
 *  We perform a BFS to find the shortest path from the root. The only difference to
 *  findShortestPathToRoot() is that we avoid nodes that are blocked.
 */
static
SCIP_RETCODE
findUnblockedShortestPathToRoot(
   SCIP*                 scip,               /**< SCIP data structure */
   int                   scale,              /**< scaling factor for edge weights */
   LEVELGRAPH*           graph,              /**< LEVELGRAPH data structure */
   unsigned int          startnode,          /**< start node for path search */
   unsigned int*         distance,           /**< distances of searched nodes from root */
   unsigned int*         queue,              /**< node queue for path search */
   SCIP_Bool*            inQueue,            /**< whether node is in the queue */
   int*                  parentTreeBackward, /**< parent tree (-1 if no parent) */
   unsigned int          root,               /**< root of the current level graph */
   SCIP_Bool*            blocked             /**< whether nodes can be used */
   )
{
   unsigned int i;
   int startQueue;
   int endQueue;
   unsigned int u;
   int v;
   unsigned int d;
   int* parentTree;
   int* transform;
 
   assert(scip != NULL);
   assert(graph != NULL);
   assert(graph->beginBackward != NULL);
   assert(graph->targetBackward != NULL);
   assert(graph->weightBackward != NULL);
   assert(distance != NULL);
   assert(queue != NULL);
   assert(inQueue != NULL);
   assert(scale >= 0);
 
   /* allocate temporary memory */
   SCIP_CALL( SCIPallocBufferArray(scip, &parentTree, (int) graph->maxnodes) );
   SCIP_CALL( SCIPallocBufferArray(scip, &transform, (int) graph->maxnodes) );
 
   assert(parentTree != NULL);
   assert(transform != NULL);
 
   /* initialize distances */
   for( i = 0; i < graph->maxnodes; ++i )
   {
      distance[i] = 2 * (graph->nnodes) * (unsigned)scale;
      parentTree[i] = -1;
      parentTreeBackward[i] = -1;
      transform[i] = -1;
      inQueue[i] = FALSE;
   }
   distance[startnode] = 0;
 
   /* initialize queue */
   startQueue = 0;
   endQueue = 0;
   queue[0] = startnode;
 
   /* as long as queue is not empty */
   while( startQueue <= endQueue )
   {
      /* pop first node from queue */
      u = queue[startQueue];
      ++startQueue;
 
      /* check adjacent nodes */
      assert(graph->beginBackward[u] >= 0);
      i = (unsigned int) graph->beginBackward[u];
      for( v = graph->targetBackward[i]; v >= 0; v = graph->targetBackward[++i] )
      {
         if( blocked[v] && v != (int) root)
            continue;
 
         /* distance to u via current arc: */
         d = distance[u] + graph->weightBackward[i];
 
         /* if we found a shorter connection */
         if( d < distance[v] )
         {
            distance[v] = d;
            parentTree[v] = (int) u;
 
            /* insert in queue if not already present */
            if( !inQueue[v] )
            {
               ++endQueue;
               queue[endQueue] = (unsigned int) v;
               inQueue[v] = TRUE;
            }
         }
      }
      /* it is not necessary to stop if we found the root (in this case there are no arcs left) and we stop anyway */
   }
 
   /* reverse order such that it is a path from the root */
   v = (int) root;
   transform[0] = (int) root;
   i = 1;
   while(parentTree[v] >= 0)
   {
      transform[i] = parentTree[v];
      ++i;
      v = parentTree[v];
   }
   --i;
   while(i > 0)
   {
      parentTreeBackward[transform[i]] = transform[i-1];
      --i;
   }
 
   /* free temporary memory */
   SCIPfreeBufferArray(scip, &transform);
   SCIPfreeBufferArray(scip, &parentTree);
 
   return SCIP_OKAY;
}
 
/** create next level of level graph for odd cycle separation
 *
 *  @see separateHeur()
 */
static
SCIP_RETCODE createNextLevel(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SEPADATA*        sepadata,           /**< separator data structure */
   SCIP_VAR**            vars,               /**< problem variables */
   SCIP_Real*            vals,               /**< values of the binary variables in the current LP relaxation */
   LEVELGRAPH*           graph,              /**< LEVELGRAPH data structure */
   unsigned int          level,              /**< number of current level */
   SCIP_Bool*            inlevelgraph,       /**< flag array if node is already inserted in level graph */
   unsigned int*         curlevel,           /**< array of nodes of the current level */
   unsigned int          ncurlevel,          /**< number of nodes of the current level */
   unsigned int*         newlevel,           /**< array of nodes of the next level */
   unsigned int*         nnewlevel,          /**< number of nodes of the next level */
   SCIP_Bool*            success             /**< FALSE, iff memory reallocation fails */
   )
{
   unsigned int i;
   unsigned int nbinvars;
   unsigned int nAdj;
 
   assert(scip != NULL);
   assert(vars != NULL);
   assert(vals != NULL);
   assert(graph != NULL);
   assert(graph->level != NULL);
   assert(graph->beginForward != NULL);
   assert(graph->targetForward != NULL);
   assert(graph->weightForward != NULL);
   assert(graph->beginBackward != NULL);
   assert(graph->targetBackward != NULL);
   assert(graph->weightBackward != NULL);
   assert(graph->beginAdj != NULL);
   assert(graph->levelAdj != NULL);
   assert(graph->sourceAdj != NULL);
   assert(graph->targetAdj != NULL);
   assert(graph->weightAdj != NULL);
   assert(inlevelgraph != NULL);
   assert(curlevel != NULL);
   assert(newlevel != NULL);
   assert(success != NULL);
 
   *nnewlevel = 0;
   nAdj = 0;
   assert(graph->maxnodes % 2 == 0);
   nbinvars = (graph->maxnodes)/2;
 
   /* for every node in current level add its implications and assign its neighbors to the next
    * level, if neighbor is not already existing in the level graph
    */
   for( i = 0; i < ncurlevel; ++i )
   {
      unsigned int negated;
      unsigned int u;
 
      /* get node */
      u = curlevel[i];
      assert(u < graph->maxnodes);
      assert(graph->level[u] == level);
      assert(graph->beginForward[u] < 0);
      assert(graph->beginBackward[u] < 0);
      assert(graph->beginAdj[u] < 0);
      assert(inlevelgraph[u]);
 
      /* get negated */
      if( u < nbinvars )
         negated = u + nbinvars;
      else
         negated = u - nbinvars;
      assert(negated < graph->maxnodes);
      assert(negated < nbinvars || u < nbinvars);
      assert(negated >= nbinvars || u >= nbinvars);
 
      /* initialize adjacency lists for node u */
      graph->beginForward[u] = (int) graph->lastF;
      graph->beginBackward[u] = (int) graph->lastB;
      graph->beginAdj[u] = (int) (graph->levelAdj[level+1] + nAdj);
 
      /* if we want to add arcs between a variable and its negated */
      if( sepadata->addselfarcs )
      {
         /* add negated variable, if not existing in the levelgraph,
          * but if the level contains more nodes than allowed
          * (defined by percent per level plus offset),
          * we skip the rest of the nodes
          */
         if( !inlevelgraph[negated] && (*nnewlevel) <= sepadata->maxlevelsize )
         {
            ++(graph->nnodes);
            graph->level[negated] = level+1;
            inlevelgraph[negated] = TRUE;
            newlevel[*nnewlevel] = negated;
            ++(*nnewlevel);
         }
         assert( *nnewlevel > sepadata->maxlevelsize || inlevelgraph[negated] );
 
         /* add self-arc if negated variable is on a neighbored level */
         if( inlevelgraph[negated] && ((graph->level[negated] == level - 1)
               || (graph->level[negated] == level) || (graph->level[negated] == level + 1)) )
         {
            /* add arc from u to its negated variable */
            SCIP_CALL( addArc(scip, graph, u, negated, level, 0, &nAdj, success) );
            if( !(*success) )
               return SCIP_OKAY;
         }
      }
 
      /* insert level of sorted root neighbors (if requested) */
      if( graph->nlevels == 0 && sepadata->sortrootneighbors )
      {
         SCIP_CALL( insertSortedRootNeighbors(scip, graph, nbinvars, ncurlevel, u, vals, vars,
               sepadata, nnewlevel, inlevelgraph, level, newlevel, success) );
      }
      else
      {
         SCIP_CALL( addNextLevelCliques(scip, sepadata, vars, vals, u, graph, level, inlevelgraph,
               newlevel, nnewlevel, &nAdj, success) );
      }
      if( !(*success) )
         return SCIP_OKAY;
 
      /* every node has a backward arc */
      assert(graph->lastB > (unsigned int) graph->beginBackward[u] || graph->nlevels == 0 );
 
      /* root has outgoing arcs otherwise we would have skipped it */
      assert(graph->lastF > 0);
 
      /* close adjacency lists */
      graph->targetForward[graph->lastF] = -1;
      ++(graph->lastF);
      if( graph->lastF == graph->sizeForward )
      {
         SCIP_CALL( checkArraySizesHeur(scip, graph, &(graph->sizeForward), &(graph->targetForward),
               &(graph->weightForward), NULL, NULL, success) );
 
         if( !(*success) )
            return SCIP_OKAY;
      }
      graph->targetBackward[graph->lastB] = -1;
      ++(graph->lastB);
      if( graph->lastB == graph->sizeBackward )
      {
         SCIP_CALL( checkArraySizesHeur(scip, graph, &(graph->sizeBackward), &(graph->targetBackward),
               &(graph->weightBackward), NULL, NULL, success) );
 
         if( !(*success) )
            return SCIP_OKAY;
      }
 
      /* terminate adjacency list with 0 for current level lifting */
      graph->sourceAdj[graph->levelAdj[level+1]+nAdj] = 0;
      graph->targetAdj[graph->levelAdj[level+1]+nAdj] = 0;
   }
   graph->levelAdj[level+2] = graph->levelAdj[level+1]+nAdj;
 
   return SCIP_OKAY;
}
 
/** The heuristic method for finding odd cycles by Hoffman, Padberg uses a level graph
 *  which is constructed as follows:
 *  First we choose a node (i.e. a variable of the problem or its negated) as root
 *  and assign it to level 0 (and no other node is assigned to level 0).
 *  All neighbors of the root are assigned to level 1 and the arcs between are added.
 *
 *  In general:
 *  All neighbors of nodes in level i that are assigned to level i+1, if they do not already appear in levels <= i.
 *  All arcs between nodes in level i and their neighbors are added.
 *
 *  In the construction we only take nodes that are contained in the fractional graph,
 *  i.e., their current LP values are not integral.
 *
 *  Since SCIP stores implications between original and negated variables,
 *  the level graph has at most twice the number of fractional binary variables of the problem.
 *
 *  Since the implication graph of SCIP is (normally) incomplete,
 *  it is possible to use arcs between an original variable and its negated
 *  to obtain more cycles which are valid but not found due to missing links.
 */
static
SCIP_RETCODE separateHeur(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SEPA*            sepa,               /**< separator */
   SCIP_SEPADATA*        sepadata,           /**< separator data structure */
   SCIP_SOL*             sol,                /**< given primal solution */
   SCIP_RESULT*          result              /**< pointer to store the result of the separation call */
   )
{
   /* memory for variable data */
   SCIP_VAR** scipvars;                      /* variables of the current SCIP (unsorted) */
   SCIP_VAR** vars;                          /* variables of the current SCIP (sorted if requested) */
   SCIP_Real* vals;                          /* LP-values of the variables (and negated variables) */
   unsigned int nbinvars;                    /* number of nodecandidates for implicationgraph */
   unsigned int* incut;                      /* flag array for check if a variable is already covered by a cut */
 
   /* storage for levelgraph */
   LEVELGRAPH graph;
   unsigned int* curlevel;
   unsigned int* newlevel;
   unsigned int ncurlevel;
   unsigned int nnewlevel;
   SCIP_Bool* inlevelgraph;
 
   /* storage for path finding */
   unsigned int* queue;
   SCIP_Bool* inQueue;
   int* parentTree;
   int* parentTreeBackward;
   unsigned int* distance;
   SCIP_Bool* blocked;
 
   /* counter and limits  */
   unsigned int maxroots;                    /* maximum of level graph roots */
   unsigned int rootcounter;                 /* counter of tried roots */
   unsigned int ncutsroot;                   /* counter of cuts per root */
   unsigned int ncutslevel;                  /* counter of cuts per level */
 
   unsigned int i;
   unsigned int j;
   unsigned int k;
 
   int nscipbinvars;
   int nscipintvars;
   int nscipimplvars;
   int nintegral;
   int l;
 
   assert(scip != NULL);
   assert(sepadata != NULL);
   assert(result != NULL);
 
   SCIP_CALL( SCIPgetVarsData(scip, &scipvars, NULL, &nscipbinvars, &nscipintvars, &nscipimplvars, NULL) );
   assert(nscipbinvars >= 0);
   assert(nscipintvars >= 0);
   assert(nscipimplvars >= 0);
 
   nintegral = nscipbinvars + nscipintvars + nscipimplvars;
   assert(scipvars != NULL || ((nscipbinvars == 0) && (nscipintvars == 0) && (nscipimplvars == 0) && (nintegral == 0)));
 
   /* collect binary variables, including implicit binary */
   SCIP_CALL( SCIPallocBufferArray(scip, &vars, nintegral) );
   for (l = 0; l < nscipbinvars; ++l)
      vars[l] = scipvars[l]; /*lint !e613*/
 
   nbinvars = (unsigned int) nscipbinvars;
   for (l = nscipbinvars; l < nintegral; ++l)
   {
      assert( SCIPvarIsIntegral(scipvars[l]) ); /*lint !e613*/
      if ( SCIPvarIsBinary(scipvars[l]) ) /*lint !e613*/
         vars[nbinvars++] = scipvars[l]; /*lint !e613*/
   }
 
   if( nbinvars == 0 )
   {
      SCIPfreeBufferArray(scip, &vars);
      return SCIP_OKAY;
   }
 
   /* initialize flag array to avoid multiple cuts per variable, if requested by user-flag */
   SCIP_CALL( SCIPallocBufferArray(scip, &vals, (int) (2 * nbinvars)) );
 
   /* prepare values */
   assert( vars != NULL );
   switch( sepadata->sortswitch )
   {
   case UNSORTED :
      /* if no sorting is requested, we use the normal variable array */
      break;
 
   case MAXIMAL_LPVALUE :
      /* store lp-values */
      for( i = 0; i < nbinvars; ++i )
         vals[i] = SCIPgetSolVal(scip, sol, vars[i]);
 
      /* sort by lp-value, maximal first */
      SCIPsortDownRealPtr(vals, (void**)vars, (int) nbinvars);
      break;
 
   case MINIMAL_LPVALUE :
      /* store lp-values */
      for( i = 0; i < nbinvars; ++i )
         vals[i] = SCIPgetSolVal(scip, sol, vars[i]);
 
      /* sort by lp-value, minimal first */
      SCIPsortRealPtr(vals, (void**)vars, (int) nbinvars);
      break;
 
   case MAXIMAL_FRACTIONALITY  :
      /* store lp-values and determine fractionality */
      for( i = 0; i < nbinvars; ++i )
      {
         vals[i] = SCIPgetSolVal(scip, sol, vars[i]);
         vals[i] = MIN(1.0 - vals[i], vals[i]);
      }
 
      /* sort by fractionality, maximal first */
      SCIPsortDownRealPtr(vals, (void**)vars, (int) nbinvars);
      break;
 
   case MINIMAL_FRACTIONALITY :
      /* store lp-values and determine fractionality */
      for( i = 0; i < nbinvars; ++i )
      {
         vals[i] = SCIPgetSolVal(scip, sol, vars[i]);
         vals[i] = MIN(1.0 - vals[i], vals[i]);
      }
 
      /* sort by fractionality, minimal first */
      SCIPsortRealPtr(vals, (void**)vars, (int) nbinvars);
      break;
 
   default :
      SCIPerrorMessage("invalid sortswitch value\n");
      SCIPABORT();
      return SCIP_INVALIDDATA;  /*lint !e527*/
   }
   assert(vars != NULL);
 
   /* create mapping for getting the index of a variable via its probindex to the index in the sorted variable array */
   SCIP_CALL( SCIPallocBufferArray(scip, &(sepadata->mapping), nintegral) );
 
   /* initialize LP value and cut flag for all variables */
   for( i = 0; i < nbinvars; ++i )
   {
      assert( 0 <= SCIPvarGetProbindex(vars[i]) && SCIPvarGetProbindex(vars[i]) < nintegral);  /* since binary, integer, and implicit variables are first */
      sepadata->mapping[SCIPvarGetProbindex(vars[i])] = i;
      vals[i] = SCIPgetSolVal(scip, sol, vars[i]); /* need to get new values, since they might be corrupted */
   }
 
   for( i = nbinvars; i < 2*nbinvars; ++i )
      vals[i] = 1.0 - vals[i - nbinvars];
 
   /* determine size of level graph */
   graph.maxnodes = 2 * nbinvars;
 
   /* the implication graph is redundant and therefore more implications and clique arcs may occur than should be possible
    * @todo later: filtering of edges which were already added
    */
   /* graph.maxarcs = nbinvars*(2*nbinvars-1); */ /* = 2*nbinvars*(2*nbinvars-1)/2 */
   graph.maxarcs = UINT_MAX;
 
   /* set sizes for graph memory storage */
   graph.sizeForward = 100 * graph.maxnodes;
   graph.sizeBackward = 100 * graph.maxnodes;
   graph.sizeAdj = 100 * graph.maxnodes;
 
   /* allocate memory for level graph structure */
   SCIP_CALL( SCIPallocBufferArray(scip, &graph.level, (int) graph.maxnodes) );
   SCIP_CALL( SCIPallocBufferArray(scip, &graph.beginForward, (int) graph.maxnodes) );
   SCIP_CALL( SCIPallocBufferArray(scip, &graph.beginBackward, (int) graph.maxnodes) );
   SCIP_CALL( SCIPallocBufferArray(scip, &graph.targetForward, (int) MIN(graph.sizeForward, graph.maxarcs)) );
   SCIP_CALL( SCIPallocBufferArray(scip, &graph.targetBackward, (int) MIN(graph.sizeBackward, graph.maxarcs)) );
   SCIP_CALL( SCIPallocBufferArray(scip, &graph.weightForward, (int) MIN(graph.sizeForward, graph.maxarcs)) );
   SCIP_CALL( SCIPallocBufferArray(scip, &graph.weightBackward, (int) MIN(graph.sizeBackward, graph.maxarcs)) );
 
   SCIP_CALL( SCIPallocBufferArray(scip, &curlevel, (int) graph.maxnodes) );
   SCIP_CALL( SCIPallocBufferArray(scip, &newlevel, (int) graph.maxnodes) );
   SCIP_CALL( SCIPallocBufferArray(scip, &graph.beginAdj, (int) graph.maxnodes) );
   SCIP_CALL( SCIPallocBufferArray(scip, &graph.sourceAdj, (int) MIN(graph.sizeAdj, graph.maxarcs)) );
   SCIP_CALL( SCIPallocBufferArray(scip, &graph.targetAdj, (int) MIN(graph.sizeAdj, graph.maxarcs)) );
   SCIP_CALL( SCIPallocBufferArray(scip, &graph.weightAdj, (int) MIN(graph.sizeAdj, graph.maxarcs)) );
   SCIP_CALL( SCIPallocBufferArray(scip, &graph.levelAdj, (int) graph.maxnodes) );
   SCIP_CALL( SCIPallocBufferArray(scip, &inlevelgraph, (int) graph.maxnodes) );
 
   SCIP_CALL( SCIPallocBufferArray(scip, &queue, (int) graph.maxnodes) );
   SCIP_CALL( SCIPallocBufferArray(scip, &inQueue, (int) graph.maxnodes) );
   SCIP_CALL( SCIPallocBufferArray(scip, &parentTree, (int) graph.maxnodes) );
   SCIP_CALL( SCIPallocBufferArray(scip, &parentTreeBackward, (int) graph.maxnodes) );
   SCIP_CALL( SCIPallocBufferArray(scip, &distance, (int) graph.maxnodes) );
   SCIP_CALL( SCIPallocBufferArray(scip, &blocked, (int) graph.maxnodes) );
 
   SCIP_CALL( SCIPallocBufferArray(scip, &incut, (int) (2 * nbinvars)) );
 
   /* initialize cut flag for all variables */
   BMSclearMemoryArray(incut, 2*nbinvars);
 
   /* determine the number of level graph roots */
   maxroots = (unsigned int) SCIPceil(scip, sepadata->offsettestvars + (0.02 * nbinvars * sepadata->percenttestvars));
   sepadata->maxlevelsize = (unsigned int) SCIPceil(scip, sepadata->offsetnodeslevel + 0.01 * sepadata->maxpernodeslevel * graph.maxnodes);
   rootcounter = 0;
 
   /* check each node as root */
   for( i = (unsigned int) sepadata->lastroot; i < graph.maxnodes && rootcounter < maxroots
           && sepadata->ncuts - sepadata->oldncuts < (unsigned int) sepadata->maxsepacutsround
           && !SCIPisStopped(scip) ; ++i )
   {
      /* skip node if it is already covered by a cut and if we do not want to search cycles starting
       * with a node already covered by a cut */
      if( incut[i] && ! sepadata->multiplecuts )
         continue;
 
      /* skip variable if its LP-value is not fractional */
      if( SCIPisFeasIntegral(scip, vals[i]) )
         continue;
 
      /* consider original and negated variable pair and skip variable if there is only one edge leaving the pair */
      if( SCIPvarGetNCliques(vars[i % nbinvars], TRUE) + SCIPvarGetNCliques(vars[i % nbinvars], FALSE) == 0 )
         continue;
 
      /* skip variable having too less implics and cliques itself */
      if( i < nbinvars )
      {
         if( SCIPvarGetNCliques(vars[i % nbinvars], TRUE ) == 0 )
            continue;
         if( !(sepadata->addselfarcs) && SCIPvarGetNCliques(vars[i % nbinvars], TRUE ) == 0 )
            continue;
      }
      else
      {
         if( SCIPvarGetNCliques(vars[i % nbinvars], FALSE) == 0 )
            continue;
 
         if( !(sepadata->addselfarcs) && SCIPvarGetNCliques(vars[i % nbinvars], FALSE) == 0 )
            continue;
      }
 
      /* node is actually considered as root node for the level graph */
      ++rootcounter;
      ncutsroot = 0;
 
      /* initialize graph */
      for( j = 0; j < graph.maxnodes; ++j)
      {
         graph.beginForward[j] = -1;
         graph.beginBackward[j] = -1;
         graph.beginAdj[j] = -1;
         inlevelgraph[j] = FALSE;
         blocked[j] = FALSE;
      }
      graph.lastF = 0;
      graph.lastB = 0;
      graph.nlevels = 0;
      graph.narcs = 0;
 
      /* insert root (first level contains root only) */
      inlevelgraph[i] = TRUE;
      graph.level[i] = 0;
      graph.levelAdj[0] = 0;
      graph.nnodes = 1;
      curlevel[0] = i;
      ncurlevel = 1;
 
      /* there are no arcs inside the root level */
      graph.levelAdj[graph.nlevels+1] = 0;
 
      /* create new levels until there are not more nodes for a new level */
      do
      {
         SCIP_Bool success;
         success = TRUE;
 
         /* all neighbors of nodes in level i that are assigned to level i+1,
            if they do not already appear in levels <= i. */
         SCIP_CALL( createNextLevel(scip, sepadata, vars, vals, &graph, graph.nlevels, inlevelgraph,
               curlevel, ncurlevel, newlevel, &nnewlevel, &success) );
 
         if( !success )
            goto TERMINATE;
 
         /* search for odd holes */
         if( graph.nlevels > 0 && (sepadata->includetriangles || graph.nlevels > 1) )
         {
            unsigned int maxcutslevel;
 
            ncutslevel = 0;
 
            /* calculate maximal cuts in this level due to cut limitations (per level, per root, per separation round) */
            maxcutslevel = (unsigned int) sepadata->maxcutslevel;
            maxcutslevel = (unsigned int) MIN((int) maxcutslevel, (int) ncutsroot - sepadata->maxcutsroot);
            maxcutslevel = (unsigned int) MIN((int) maxcutslevel, sepadata->maxsepacutsround + (int) sepadata->oldncuts - (int) sepadata->ncuts);
 
            /* for each cross edge in this level find both shortest paths to root (as long as no limits are reached) */
            for( j = graph.levelAdj[graph.nlevels+1]; j < graph.levelAdj[graph.nlevels+2]
                    && ncutslevel < maxcutslevel && !SCIPisStopped(scip); ++j )
            {
               unsigned int ncyclevars;
               unsigned int u;
 
               /* storage for cut generation */
               unsigned int* pred; /* predecessor list */
               SCIP_Bool* incycle; /* flag array for check of double variables in found cycle */
 
               assert(graph.sourceAdj[j] < graph.targetAdj[j]);
 
               /* find shortest path from source to root and update weight of cycle */
               SCIP_CALL( findShortestPathToRoot(scip, sepadata->scale, &graph, graph.sourceAdj[j], distance, queue, inQueue, parentTree) );
 
#ifndef NDEBUG
               /* check that this path ends in the root node */
               u = i;
               k = 1;
               while( u != graph.sourceAdj[j] )
               {
                  assert(parentTree[u] != -1 && k <= graph.maxnodes);
                  u = (unsigned int) parentTree[u];
                  ++k;
               }
#endif
 
               /* block all nodes that are adjacent to nodes of the first path */
               for( k = 0; k < graph.nnodes; ++k )
                  blocked[k] = FALSE;
               SCIP_CALL( blockRootPath(scip, &graph, graph.sourceAdj[j], inlevelgraph, blocked, parentTree, i) );
 
               /* if the target is block, no violated odd hole can be found */
               if( blocked[graph.targetAdj[j]] )
                  continue;
 
               /* find shortest path from root to target node avoiding blocked nodes */
               SCIP_CALL( findUnblockedShortestPathToRoot(scip, sepadata->scale, &graph,
                     graph.targetAdj[j], distance, queue, inQueue, parentTreeBackward, i, blocked) );
 
               /* no odd cycle cut found */
               if( parentTreeBackward[graph.targetAdj[j]] < 0 )
                  continue;
 
               /* allocate and initialize predecessor list and flag array representing odd cycle */
               SCIP_CALL( SCIPallocBufferArray(scip, &pred, (int) (2 * nbinvars)) );
               SCIP_CALL( SCIPallocBufferArray(scip, &incycle, (int) (2 * nbinvars)) );
               for( k = 0; k < 2 * nbinvars; ++k )
               {
                  pred[k] = DIJKSTRA_UNUSED;
                  incycle[k] = FALSE;
               }
               ncyclevars = 0;
               success = TRUE;
 
               /* check cycle for x-neg(x)-sub-cycles and clean them
                *  (note that a variable cannot appear twice in a cycle since it is only once in the graph)
                * convert parentTreeBackward and parentTree to pred&incycle structure for generateOddCycleCut
                */
               u = graph.targetAdj[j];
 
               /* add path to root to cycle */
               while( success && u != i )
               {
                  /* insert u in predecessor list */
                  pred[u] = (unsigned int) parentTreeBackward[u];
 
                  /* remove pairs of original and negated variable from cycle */
                  SCIP_CALL( cleanCycle(scip, pred, incycle, incut, u, graph.targetAdj[j], nbinvars, &ncyclevars,
                        sepadata->repaircycles, sepadata->allowmultiplecuts, &success) );
 
                  assert(parentTreeBackward[u] >= 0 || u == i);
 
                  /* select next node on path */
                  u = (unsigned int) parentTreeBackward[u];
               }
 
               /* add path from root to cycle */
               while( success && u != graph.sourceAdj[j] )
               {
                  /* insert u in predecessor list */
                  pred[u] = (unsigned int) parentTree[u];
 
                  /* remove pairs of original and negated variable from cycle */
                  SCIP_CALL( cleanCycle(scip, pred, incycle, incut, u, graph.targetAdj[j], nbinvars, &ncyclevars,
                        sepadata->repaircycles, sepadata->allowmultiplecuts, &success) );
 
                  /* select next node on path */
                  u = (unsigned int) parentTree[u];
               }
               assert(!success || u == graph.sourceAdj[j]);
 
               /* close the cycle */
               if( success )
               {
                  pred[u] = graph.targetAdj[j];
 
                  /* remove pairs of original and negated variable from cycle */
                  SCIP_CALL( cleanCycle(scip, pred, incycle, incut, u, graph.targetAdj[j], nbinvars, &ncyclevars,
                        sepadata->repaircycles, sepadata->allowmultiplecuts, &success) );
               }
 
               /* generate cut (if cycle is valid) */
               if(success)
               {
                  GRAPHDATA graphdata;
                  unsigned int oldncuts;
 
                  graphdata.usegls = FALSE;
                  graphdata.levelgraph = &graph;
                  graphdata.dijkstragraph = NULL;
 
                  oldncuts = sepadata->ncuts;
 
                  SCIP_CALL( generateOddCycleCut(scip, sepa, sol, vars, nbinvars, graph.targetAdj[j], pred, ncyclevars,
                        incut, vals, sepadata, &graphdata, result) );
 
                  if(oldncuts < sepadata->ncuts)
                  {
                     ++ncutsroot;
                     ++ncutslevel;
                  }
               }
 
               /* free temporary memory */
               SCIPfreeBufferArray(scip, &incycle);
               SCIPfreeBufferArray(scip, &pred);
 
               if ( *result == SCIP_CUTOFF || *result == SCIP_REDUCEDDOM )
                  break;
            }
         }
 
         if ( *result == SCIP_CUTOFF || *result == SCIP_REDUCEDDOM )
            break;
 
         /* copy new level to current one */
         ++(graph.nlevels);
         for( j = 0; j < nnewlevel; ++j )
            curlevel[j] = newlevel[j];
         ncurlevel = nnewlevel;
      }
      /* stop level creation loop if new level is empty or any limit is reached */
      while( nnewlevel > 0 && !SCIPisStopped(scip)
         && graph.nlevels < (unsigned int) sepadata->maxnlevels
         && ncutsroot < (unsigned int) sepadata->maxcutsroot
         && sepadata->ncuts - sepadata->oldncuts < (unsigned int) sepadata->maxsepacutsround);
   }
 
   /* store the last tried root (when running without sorting the variable array, we don't want
    * to always check the same variables and therefore start next time where we stopped last time)
    */
   if( sepadata->sortswitch == UNSORTED )
   {
      if( i == graph.maxnodes )
         sepadata->lastroot = 0;
      else
         sepadata->lastroot = (int) i;
   }
 
 TERMINATE:
   /* free memory */
   SCIPfreeBufferArray(scip, &incut);
 
   SCIPfreeBufferArray(scip, &blocked);
   SCIPfreeBufferArray(scip, &distance);
   SCIPfreeBufferArray(scip, &parentTreeBackward);
   SCIPfreeBufferArray(scip, &parentTree);
   SCIPfreeBufferArray(scip, &inQueue);
   SCIPfreeBufferArray(scip, &queue);
 
   SCIPfreeBufferArray(scip, &inlevelgraph);
   SCIPfreeBufferArray(scip, &graph.levelAdj);
   SCIPfreeBufferArray(scip, &graph.weightAdj);
   SCIPfreeBufferArray(scip, &graph.targetAdj);
   SCIPfreeBufferArray(scip, &graph.sourceAdj);
   SCIPfreeBufferArray(scip, &graph.beginAdj);
   SCIPfreeBufferArray(scip, &newlevel);
   SCIPfreeBufferArray(scip, &curlevel);
 
   SCIPfreeBufferArray(scip, &graph.weightBackward);
   SCIPfreeBufferArray(scip, &graph.weightForward);
   SCIPfreeBufferArray(scip, &graph.targetBackward);
   SCIPfreeBufferArray(scip, &graph.targetForward);
   SCIPfreeBufferArray(scip, &graph.beginBackward);
   SCIPfreeBufferArray(scip, &graph.beginForward);
   SCIPfreeBufferArray(scip, &graph.level);
 
   SCIPfreeBufferArray(scip, &(sepadata->mapping));
   SCIPfreeBufferArray(scip, &vals);
   SCIPfreeBufferArray(scip, &vars);
 
   return SCIP_OKAY;
}
 
 
/* methods for separateGLS() */
 
/** memory reallocation method (the graph is normally very dense, so we dynamically allocate only the memory we need) */
static
SCIP_RETCODE checkArraySizesGLS(
   SCIP*                 scip,               /**< SCIP data structure */
   unsigned int          maxarcs,            /**< maximal size of graph->head and graph->weight */
   unsigned int*         arraysize,          /**< current size of graph->head and graph->weight */
   DIJKSTRA_GRAPH*       graph,              /**< Dijkstra Graph data structure */
   SCIP_Bool*            success             /**< FALSE, iff memory reallocation fails */
   )
{
   SCIP_Real memorylimit;
   unsigned int additional;
   unsigned int j;
   unsigned int oldarraysize;
 
   assert(scip != NULL);
   assert(arraysize != NULL);
   assert(graph != NULL);
   assert(graph->head != NULL);
   assert(graph->weight != NULL);
   assert(success != NULL);
 
   SCIPdebugMsg(scip, "reallocating graph->head and graph->weight...\n");
 
   additional = (MIN(maxarcs, 2 * (*arraysize)) - (*arraysize)) * ((int) sizeof(*(graph->head)));
   additional += (MIN(maxarcs, 2 * (*arraysize)) - (*arraysize)) * ((int) sizeof(*(graph->weight)));
 
   SCIP_CALL( SCIPgetRealParam(scip, "limits/memory", &memorylimit) );
   if( !SCIPisInfinity(scip, memorylimit) )
   {
      memorylimit -= SCIPgetMemUsed(scip)/1048576.0;
      memorylimit -= SCIPgetMemExternEstim(scip)/1048576.0;
   }
 
   /* if memorylimit would be exceeded or any other limit is reached free all data and exit */
   if( memorylimit <= additional/1048576.0 || SCIPisStopped(scip) )
   {
      *success = FALSE;
      SCIPdebugMsg(scip, "...memory limit exceeded\n");
      return SCIP_OKAY;
   }
 
   oldarraysize = *arraysize;
   *arraysize = 2*(*arraysize);
 
   SCIP_CALL( SCIPreallocBufferArray(scip, &(graph->head), (int) MIN(maxarcs, (*arraysize))) );
   SCIP_CALL( SCIPreallocBufferArray(scip, &(graph->weight), (int) MIN(maxarcs, (*arraysize))) );
 
   /* if memorylimit exceeded, leave the separator */
   SCIP_CALL( SCIPgetRealParam(scip, "limits/memory", &memorylimit) );
 
   if( !SCIPisInfinity(scip, memorylimit) )
   {
      memorylimit -= SCIPgetMemUsed(scip)/1048576.0;
      memorylimit -= SCIPgetMemExternEstim(scip)/1048576.0;
   }
 
   if( memorylimit <= 2.0*SCIPgetMemExternEstim(scip)/1048576.0 )
   {
      SCIPdebugMsg(scip, "...memory limit exceeded - freeing all arrays\n");
      *success = FALSE;
      return SCIP_OKAY;
   }
 
   /* initialize new segments of graph as empty graph */
   for( j = oldarraysize; j < MIN(maxarcs,(*arraysize)); ++j )
   {
      (graph->head)[j] = DIJKSTRA_UNUSED;
      (graph->weight)[j] = DIJKSTRA_UNUSED;
   }
 
   SCIPdebugMsg(scip, "...with success\n");
 
   return SCIP_OKAY;
}
 
/** add implications from cliques of the given node */
static
SCIP_RETCODE addGLSCliques(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SEPADATA*        sepadata,           /**< separator data structure */
   SCIP_VAR**            vars,               /**< problem variables */
   unsigned int          varsidx,            /**< index of current variable inside the problem variables */
   unsigned int          dijkindex,          /**< index of current variable inside the Dijkstra Graph */
   SCIP_Real*            vals,               /**< value of the variables in the given solution */
   unsigned int          nbinvars,           /**< number of binary problem variables */
   unsigned int          ncliques,           /**< number of cliques of the current node */
   DIJKSTRA_GRAPH*       graph,              /**< Dijkstra Graph data structure */
   unsigned int*         narcs,              /**< current number of arcs inside the Dijkstra Graph */
   unsigned int          maxarcs,            /**< maximal number of arcs inside the Dijkstra Graph */
   SCIP_Bool             original,           /**< TRUE, iff variable is a problem variable */
   SCIP_Bool*            emptygraph,         /**< TRUE, iff there is no arc in the implication graph of the binary variables of SCIP */
   unsigned int*         arraysize,          /**< current size of graph->head and graph->weight */
   SCIP_Bool*            success             /**< FALSE, iff memory reallocation fails */
   )
{
   SCIP_VAR* neighbor;                       /* current neighbor of the current variable */
   unsigned int neighindex;
   SCIP_CLIQUE** cliques;                    /* cliques of the current variable (with x==0/1) */
   unsigned int ncliquevars;                 /* number of variables of a clique */
   SCIP_VAR** cliquevars;                    /* variables of a clique */
   SCIP_Bool* cliquevals;                    /* is the cliquevariable fixed to TRUE or to FALSE */
   unsigned int k;
   unsigned int m;
 
   assert(scip != NULL);
   assert(sepadata != NULL);
   assert(vars != NULL);
   assert(graph != NULL);
   assert(graph->head != NULL);
   assert(graph->weight != NULL);
   assert(narcs != NULL);
   assert(emptygraph != NULL);
   assert(arraysize != NULL);
   assert(success != NULL);
 
   /* if current variable has cliques of current clique-type */
   cliques = SCIPvarGetCliques(vars[varsidx], original);
   assert(cliques != NULL || ncliques == 0);
 
   for( k = 0; k < ncliques; ++k )
   {
      assert( cliques != NULL ); /* for lint */
 
      /* get clique data */
      cliquevars = SCIPcliqueGetVars(cliques[k]);
      ncliquevars = (unsigned int) SCIPcliqueGetNVars(cliques[k]);
      cliquevals = SCIPcliqueGetValues(cliques[k]);
 
      assert(cliquevars != NULL || ncliquevars == 0);
      assert(cliquevals != NULL || ncliquevars == 0);
 
      /* add arcs for all fractional variables in clique */
      for( m = 0; m < ncliquevars; ++m )
      {
         int tmp;
 
         assert( cliquevars != NULL && cliquevals != NULL ); /* for lint */
         neighbor = cliquevars[m];
 
         neighindex = sepadata->mapping[SCIPvarGetProbindex(neighbor)];
         assert(neighindex < nbinvars);
 
         /* ignore current variable */
         if( neighindex == varsidx )
            continue;
 
         /* we use only variables with fractional LP-solution values */
         if( SCIPisFeasIntegral(scip, vals[neighindex]) )
            continue;
 
         /* forward direction (the backward is created at the occurrence of the current variable in the cliquevars of the neighbor) */
         /* x==1 */
         if( original )
         {
            /* implication to y=0 (I->III) */
            if( cliquevals[m] )
            {
               tmp = (int) SCIPfeasCeil(scip, sepadata->scale * (1 - vals[varsidx] - vals[neighindex] ));
               graph->weight[*narcs] = (unsigned int) MAX(0, tmp);
               graph->head[*narcs] = neighindex + 2 * nbinvars;
            }
            /* implication to y=1 (I->IV) (cliquevals[m] == FALSE) */
            else
            {
               tmp = (int) SCIPfeasCeil(scip, sepadata->scale * (1 - vals[varsidx] - (1 - vals[neighindex]) ));
               graph->weight[*narcs] = (unsigned int) MAX(0, tmp);
               graph->head[*narcs] = neighindex + 3 * nbinvars;
            }
         }
         /* x==0 */
         else
         {
            /* implication to y=0 (II->III) */
            if( cliquevals[m] )
            {
               tmp = (int) SCIPfeasCeil(scip, sepadata->scale * (1 - (1 - vals[varsidx]) - vals[neighindex] ));
               graph->weight[*narcs] = (unsigned int) MAX(0, tmp);
               graph->head[*narcs] = neighindex + 2 * nbinvars;
            }
            /* implication to y=1 (II->IV) (cliquevals[m] == FALSE) */
            else
            {
               tmp = (int) SCIPfeasCeil(scip, sepadata->scale * (1 - (1 - vals[varsidx]) - (1-vals[neighindex]) )) ;
               graph->weight[*narcs] = (unsigned int) MAX(0, tmp);
               graph->head[*narcs] = neighindex + 3 * nbinvars;
            }
         }
 
         /* update minimum and maximum weight values */
         if( graph->weight[*narcs] < graph->minweight )
            graph->minweight = graph->weight[*narcs];
 
         if( graph->weight[*narcs] > graph->maxweight )
            graph->maxweight = graph->weight[*narcs];
 
         ++(*narcs);
         if( *arraysize == *narcs )
         {
            SCIP_CALL( checkArraySizesGLS(scip, maxarcs, arraysize, graph, success) );
 
            if( !(*success) )
               return SCIP_OKAY;
         }
         assert((*narcs) < maxarcs);
         ++(graph->outcnt[dijkindex]);
 
         *emptygraph = FALSE;
      }
   }
 
   return SCIP_OKAY;
}
 
/** The classical method for finding odd cycles by Groetschel, Lovasz, Schrijver uses a bipartite graph
 *  which contains in each partition a node for every node in the original graph.
 *  All arcs uv of the original graph are copied to arcs from u of the first partition to v' of the second partition
 *  and from u' of the second partition to v of the first partition.
 *  A Dijkstra algorithm is used to find a path from a node x to its copy x', if existing.
 *  The nodes in the original graph corresponding to the nodes on the path form an odd cycle.
 *
 *  Since SCIP stores implications between original and negated variables,
 *  our original graph has at most twice the number of binary variables of the problem.
 *  By creating the bipartite graph we gain 4 segments of the graph:
 *
 *  I   - nodes of the original variables in the first bipartition \n
 *  II  - nodes of the negated variables in the first bipartition \n
 *  III - nodes of the original variables in the second bipartition \n
 *  IV  - nodes of the negated variables in the second bipartition
 *
 *  The length of every segment if the number of binary variables in the original problem.
 *
 *  Since the implication graph of SCIP is (normally) incomplete,
 *  it is possible to use arcs between an original variable and its negated
 *  to obtain more cycles which are valid but not found due to missing links.
 */
static
SCIP_RETCODE separateGLS(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SEPA*            sepa,               /**< separator */
   SCIP_SEPADATA*        sepadata,           /**< separator data structure */
   SCIP_SOL*             sol,                /**< given primal solution */
   SCIP_RESULT*          result              /**< pointer to store the result of the separation call */
   )
{
   SCIP_Bool emptygraph;                     /* flag if graph contains an arc */
 
   SCIP_Real* vals;                          /* values of the variables in the given solution */
   unsigned int* incut;
 
   unsigned int i;
   unsigned int j;
 
   SCIP_VAR** scipvars;                      /* variables of the current SCIP (unsorted) */
   SCIP_VAR** vars;                          /* variables of the current SCIP (sorted if requested) */
   unsigned int nbinvars;                    /* number of binary problem variables */
   SCIP_Bool original;                       /* flag if the current variable is original or negated */
 
   unsigned int ncliques;                    /* number of cliques of the current variable */
 
   DIJKSTRA_GRAPH graph;                     /* Dijkstra graph data structure */
   unsigned int arraysize;                   /* current size of graph->head and graph->weight */
   unsigned int narcs;                       /* number of arcs in the Dijkstra graph */
   unsigned int maxarcs;                     /* maximum number of arcs in the Dijkstra graph */
   unsigned int maxstarts;                   /* maximum number of start nodes */
   unsigned int startcounter;                /* counter of tried start nodes */
   unsigned long long cutoff;                /* cutoff value for Dijkstra algorithm */
 
   unsigned int startnode;                   /* start node for Dijkstra algorithm */
   unsigned int endnode;                     /* target node for Dijkstra algorithm */
   unsigned long long* dist;                 /* distance matrix for Dijkstra algorithm */
   unsigned int* pred;                       /* predecessor list for found cycle */
   unsigned int* entry;                      /* storage for Dijkstra algorithm */
   unsigned int* order;                      /* storage for Dijkstra algorithm */
   unsigned int dijkindex;
   SCIP_Bool success;                        /* flag for check for several errors */
 
   SCIP_Bool* incycle;                       /* flag array if variable is contained in the found cycle */
   unsigned int* pred2;                      /* temporary predecessor list for backprojection of found cycle */
 
   int nscipbinvars;
   int nscipintvars;
   int nscipimplvars;
   int nintegral;
   int k;
 
   assert(scip != NULL);
   assert(sepadata != NULL);
   assert(result != NULL);
 
   success = TRUE;
   emptygraph = TRUE;
 
   SCIP_CALL( SCIPgetVarsData(scip, &scipvars, NULL, &nscipbinvars, &nscipintvars, &nscipimplvars, NULL) );
   assert(nscipbinvars >= 0);
   assert(nscipintvars >= 0);
   assert(nscipimplvars >= 0);
 
   nintegral = nscipbinvars + nscipintvars + nscipimplvars;
   assert(scipvars != NULL || ((nscipbinvars == 0) && (nscipintvars == 0) && (nscipimplvars == 0) && (nintegral == 0)));
 
   /* collect binary variables, including implicit binary */
   SCIP_CALL( SCIPallocBufferArray(scip, &vars, nintegral) );
   for (k = 0; k < nscipbinvars; ++k)
      vars[k] = scipvars[k]; /*lint !e613*/
 
   nbinvars = (unsigned int) nscipbinvars;
   for (k = nscipbinvars; k < nintegral; ++k)
   {
      assert( SCIPvarIsIntegral(scipvars[k]) ); /*lint !e613*/
      if ( SCIPvarIsBinary(scipvars[k]) ) /*lint !e613*/
         vars[nbinvars++] = scipvars[k]; /*lint !e613*/
   }
 
   if( nbinvars == 0 )
   {
      SCIPfreeBufferArray(scip, &vars);
      return SCIP_OKAY;
   }
 
   /* initialize flag array to avoid multiple cuts per variable, if requested by user-flag */
   SCIP_CALL( SCIPallocBufferArray(scip, &vals, (int) (2 * nbinvars)) );
 
   /* prepare values */
   assert( vars != NULL );
   switch( sepadata->sortswitch )
   {
   case UNSORTED :
      /* if no sorting is requested, we use the normal variable array */
      break;
 
   case MAXIMAL_LPVALUE :
      /* store lp-values */
      for( i = 0; i < nbinvars; ++i )
         vals[i] = SCIPgetSolVal(scip, sol, vars[i]);
 
      /* sort by lp-value, maximal first */
      SCIPsortDownRealPtr(vals, (void**)vars, (int) nbinvars);
      break;
 
   case MINIMAL_LPVALUE :
      /* store lp-values */
      for( i = 0; i < nbinvars; ++i )
         vals[i] = SCIPgetSolVal(scip, sol, vars[i]);
 
      /* sort by lp-value, minimal first */
      SCIPsortRealPtr(vals, (void**)vars, (int) nbinvars);
      break;
 
   case MAXIMAL_FRACTIONALITY  :
      /* store lp-values and determine fractionality */
      for( i = 0; i < nbinvars; ++i )
      {
         vals[i] = SCIPgetSolVal(scip, sol, vars[i]);
         vals[i] = MIN(1.0 - vals[i], vals[i]);
      }
 
      /* sort by fractionality, maximal first */
      SCIPsortDownRealPtr(vals, (void**)vars, (int) nbinvars);
      break;
 
   case MINIMAL_FRACTIONALITY :
      /* store lp-values and determine fractionality */
      for( i = 0; i < nbinvars; ++i )
      {
         vals[i] = SCIPgetSolVal(scip, sol, vars[i]);
         vals[i] = MIN(1.0 - vals[i], vals[i]);
      }
 
      /* sort by fractionality, minimal first */
      SCIPsortRealPtr(vals, (void**)vars, (int) nbinvars);
      break;
 
   default :
      SCIPerrorMessage("invalid sortswitch value\n");
      SCIPABORT();
      return SCIP_INVALIDDATA;  /*lint !e527*/
   }
   assert(vars != NULL);
 
   /* create mapping for getting the index of a variable via its probindex to the index in the sorted variable array */
   SCIP_CALL( SCIPallocBufferArray(scip, &(sepadata->mapping), nintegral) );
   SCIP_CALL( SCIPallocBufferArray(scip, &incut, (int) (4 * nbinvars)) );
   BMSclearMemoryArray(incut, 4 * nbinvars);
 
   /* initialize LP value and cut flag for all variables */
   for( i = 0; i < nbinvars; ++i )
   {
      assert( 0 <= SCIPvarGetProbindex(vars[i]) && SCIPvarGetProbindex(vars[i]) < nintegral);  /* since binary, integer, and implicit variables are first */
      sepadata->mapping[SCIPvarGetProbindex(vars[i])] = i;
      vals[i] = SCIPgetSolVal(scip, sol, vars[i]); /* need to get new values, since they might be corrupted */
   }
 
   for( i = nbinvars; i < 2*nbinvars; ++i )
      vals[i] = 1 - vals[i - nbinvars];
 
   /* initialize number of nodes in  Dijkstra graph (2*2*n nodes in a mirrored bipartite graph with negated variables) */
   graph.nodes = 4 * nbinvars;
 
   /* Initialize number of arcs in Dijkstra graph, should be (nbinvars+1) * graph.nodes, but might deviate, because
    * there might be parallel arcs:
    * nbinvars-1 possible arcs per node (it is not possible to be linked to variable and negated)
    * + 1 self-arc (arc to negated variable)
    * + 1 dummy arc for Dijkstra data structure
    * = nbinvars+1 arcs per node
    * * graph.nodes
    * = (nbinvars+1)*graph.nodes
    * + graph.nodes => separating entries for arclist)
    *
    * Number is corrected below.
    */
   graph.arcs = 0;
 
   /* the implication graph is redundant and therefore more implications and clique arcs may occur than should be possible
    * @todo later: filtering of edges which were already added,  maxarcs should be graph.arcs rather than INT_MAX;
    */
   maxarcs = UINT_MAX;
 
   /* allocate memory for Dijkstra graph arrays */
   arraysize = 100 * graph.nodes;
   SCIP_CALL( SCIPallocBufferArray(scip, &graph.outbeg, (int) graph.nodes) );
   SCIP_CALL( SCIPallocBufferArray(scip, &graph.outcnt, (int) graph.nodes) );
   SCIP_CALL( SCIPallocBufferArray(scip, &graph.head, (int) MIN(maxarcs, arraysize)) );
   SCIP_CALL( SCIPallocBufferArray(scip, &graph.weight, (int) MIN(maxarcs, arraysize)) );
   SCIP_CALL( SCIPallocBufferArray(scip, &dist, (int) graph.nodes) );
   SCIP_CALL( SCIPallocBufferArray(scip, &pred, (int) graph.nodes) );
   SCIP_CALL( SCIPallocBufferArray(scip, &entry, (int) graph.nodes) );
   SCIP_CALL( SCIPallocBufferArray(scip, &order, (int) graph.nodes) );
 
   /* initialize Dijkstra graph as empty graph */
   for( i = 0; i < MIN(arraysize, maxarcs); ++i )
   {
      graph.head[i] = DIJKSTRA_UNUSED;
      graph.weight[i] = DIJKSTRA_UNUSED;
   }
   graph.minweight = DIJKSTRA_FARAWAY;
   graph.maxweight = 0;
   narcs = 0;
 
#ifndef NDEBUG
   for( i = 0; i < graph.nodes; ++i )
   {
      graph.outbeg[i] = 0;
      graph.outcnt[i] = 0;
   }
#endif
 
   /* add arcs from first to second partition to Dijkstra graph (based on the original fractional implication graph) */
   for( dijkindex = 0; dijkindex < 2 * nbinvars; ++dijkindex )
   {
      graph.outbeg[dijkindex] = narcs;
      graph.outcnt[dijkindex] = 0;
 
      /* decide if we have original or negated variable */
      if( dijkindex < nbinvars )
      {
         i = dijkindex;
         original = TRUE;
      }
      else
      {
         i = dijkindex - nbinvars;
         original = FALSE;
      }
      assert(i < nbinvars);
 
      /* if the variable has a fractional value we add it to the graph */
      if( ! SCIPisFeasIntegral(scip, vals[i]) )
      {
         ncliques =  (unsigned int) SCIPvarGetNCliques(vars[i], original);
 
         /* insert arcs for cliques (take var => getCliques => take cliquevar => add forward-arc) */
         /* add clique arcs of clique-type "original" if current variable has them */
         if( ncliques >= 1 )
         {
            /* x==1/0 -> y==0/1 (I/II -> III/IV) */
            SCIP_CALL( addGLSCliques(scip, sepadata, vars, i, dijkindex, vals, nbinvars, ncliques, &graph,
                  &narcs, maxarcs, original, &emptygraph, &arraysize, &success) );
 
            if( !success )
               goto TERMINATE;
         }
      }
 
      /* add link to copy of negated variable (useful if/because the implication graph is incomplete) */
      if( sepadata->addselfarcs && graph.outcnt[dijkindex] > 0 )
      {
         /* I -> IV */
         if( original )
         {
            assert(dijkindex < nbinvars);
            graph.head[narcs] = dijkindex + 3*nbinvars;
         }
         /* II -> III */
         else
         {
            assert(dijkindex >= nbinvars && dijkindex < 2*nbinvars);
            graph.head[narcs] = dijkindex + nbinvars;
         }
         graph.weight[narcs] = 0;
 
         /* update minimum and maximum weight values */
         if( graph.weight[narcs] < graph.minweight )
            graph.minweight = graph.weight[narcs];
 
         if( graph.weight[narcs] > graph.maxweight )
            graph.maxweight = graph.weight[narcs];
 
         ++narcs;
         if( arraysize == narcs )
         {
            SCIP_CALL( checkArraySizesGLS(scip, maxarcs, &arraysize, &graph, &success) );
            if( !success )
               goto TERMINATE;
         }
         assert(narcs < maxarcs);
         ++(graph.outcnt[dijkindex]);
      }
 
      /* add separating arc */
      graph.head[narcs] = DIJKSTRA_UNUSED;
      graph.weight[narcs] = DIJKSTRA_UNUSED;
      ++narcs;
      if( arraysize == narcs )
      {
         SCIP_CALL( checkArraySizesGLS(scip, maxarcs, &arraysize, &graph, &success) );
         if( !success )
            goto TERMINATE;
      }
      assert(narcs < maxarcs);
   }
 
   /* if the graph is empty, there is nothing to do */
   if( emptygraph )
      goto TERMINATE;
 
   /* add arcs from second to first partition to Dijkstra graph */
   for( i = 0; i < 2*nbinvars; ++i )
   {
      graph.outbeg[2 * nbinvars + i] = narcs;
      graph.outcnt[2 * nbinvars + i] = 0;
 
      /* copy all arcs to head from the second to the first bipartition */
      for( j = graph.outbeg[i]; j < graph.outbeg[i] + graph.outcnt[i]; ++j )
      {
         /* there are only arcs from first bipartition to the second */
         assert(graph.head[j] >= 2*nbinvars && graph.head[j] < 4*nbinvars);
 
         /* the backward arcs head from III->I or IV->II */
         graph.head[narcs] = graph.head[j] - 2 * nbinvars;
         graph.weight[narcs] = graph.weight[j];
         ++narcs;
         if( arraysize == narcs )
         {
            SCIP_CALL( checkArraySizesGLS(scip, maxarcs, &arraysize, &graph, &success) );
 
            if( !success )
               goto TERMINATE;
         }
         assert(narcs < maxarcs);
         ++(graph.outcnt[2*nbinvars+i]);
      }
 
      /* add separating arc */
      graph.head[narcs] = DIJKSTRA_UNUSED;
      graph.weight[narcs] = DIJKSTRA_UNUSED;
      ++narcs;
 
      if( arraysize == narcs )
      {
         SCIP_CALL( checkArraySizesGLS(scip, maxarcs, &arraysize, &graph, &success) );
 
         if( !success )
            goto TERMINATE;
      }
      assert(narcs < maxarcs);
   }
 
   /* correct number of arcs */
   graph.arcs = narcs;
 
   SCIPdebugMsg(scip, "--- graph successfully created (%u nodes, %u arcs) ---\n", graph.nodes, narcs);
 
   /* graph is now prepared for Dijkstra methods */
   assert( dijkstraGraphIsValid(&graph) );
 
#ifdef SCIP_ODDCYCLE_WRITEGRAPH
   {
      char probname [SCIP_MAXSTRLEN];
      char filename [SCIP_MAXSTRLEN];
      char* name;
 
      (void)  SCIPsnprintf(probname, SCIP_MAXSTRLEN, "%s", SCIPgetProbName(scip));
      SCIPsplitFilename(probname, NULL, &name, NULL, NULL);
      (void)  SCIPsnprintf(filename, SCIP_MAXSTRLEN, "%s_%d.gml", name, SCIPgetNLPs(scip));
      SCIP_CALL( SCIPwriteCliqueGraph(scip, filename, TRUE, TRUE) );
      SCIPverbMessage(scip, SCIP_VERBLEVEL_HIGH, NULL, "Wrote clique/implication graph to <%s>.\n", filename);
   }
#endif
 
   /* determine the number of start nodes */
   maxstarts = (unsigned int) SCIPceil(scip, sepadata->offsettestvars + (0.02 * nbinvars * sepadata->percenttestvars));
   startcounter = 0;
 
   /* allocate and initialize predecessor list and flag array representing odd cycle */
   SCIP_CALL( SCIPallocBufferArray(scip, &pred2, (int) (2 * nbinvars)) );
   SCIP_CALL( SCIPallocBufferArray(scip, &incycle, (int) (2 * nbinvars)) );
 
   /* separate odd cycle inequalities by GLS method */
   cutoff = (unsigned long long) (0.5 * sepadata->scale);
   for( i = (unsigned int) sepadata->lastroot; i < 2 * nbinvars
           && startcounter < maxstarts
           && sepadata->ncuts - sepadata->oldncuts < (unsigned int) sepadata->maxsepacutsround
           && !SCIPisStopped(scip); ++i )
   {
      unsigned int ncyclevars;               /* cycle length */
      SCIP_Bool edgedirection;               /* partitionindicator for backprojection from bipartite graph to original graph:
                                              * is the current edge a backwards edge, i.e., from second to first partition? */
 
      /* skip isolated node */
      if( graph.head[graph.outbeg[i]] == DIJKSTRA_UNUSED )
         continue;
 
      /* if node has only one arc, there is no odd cycle containing this node
       * (but there are invalid odd circuits containing the only neighbor twice)
       */
      if( graph.head[graph.outbeg[i]+1] == DIJKSTRA_UNUSED )
         continue;
 
      /* search shortest path from node to its counter part in the other partition */
      startnode = i;
      endnode = i + 2 * nbinvars;
 
      /* skip node if it is already covered by a cut and
       * we do not want to search cycles starting with a node already covered by a cut
       */
      if( incut[startnode] && ! sepadata->multiplecuts )
         continue;
 
      ++startcounter;
 
      if ( sepadata->allowmultiplecuts )
         (void) dijkstraPairCutoffIgnore(&graph, startnode, endnode, incut, cutoff, dist, pred, entry, order);
      else
         (void) dijkstraPairCutoff(&graph, startnode, endnode, cutoff, dist, pred, entry, order);
 
      /* no odd cycle cut found */
      if( dist[endnode] == DIJKSTRA_FARAWAY )
         continue;
 
      /* skip check if cutoff has been exceeded */
      if ( dist[endnode] >= cutoff )
         continue;
 
      /* detect cycle including:
       * project bipartitioned graph to original graph of variables and their negated
       * (pred&incycle-structure for generateOddCycleCut)
       * check cycles for double variables and try to clean variable-negated-sub-cycles if existing
       */
      for( j = 0; j < 2 * nbinvars; ++j )
      {
         pred2[j] = DIJKSTRA_UNUSED;
         incycle[j] = FALSE;
      }
 
      ncyclevars = 0;
      edgedirection = TRUE;
      success = TRUE;
 
      /* construct odd cycle in implication graph from shortest path on bipartite graph */
      for( dijkindex = endnode; dijkindex != startnode && success; dijkindex = pred[dijkindex], edgedirection = !edgedirection )
      {
         if( edgedirection )
         {
            /* check that current node is in second partition and next node is in first partition */
            assert(dijkindex >= 2 * nbinvars && dijkindex < 4 * nbinvars);
            assert(pred[dijkindex] < 2*nbinvars);
 
            pred2[dijkindex - 2 * nbinvars] = pred[dijkindex];
 
            /* check whether the object found is really a cycle without sub-cycles
             * (sub-cycles may occur in case there is not violated odd cycle inequality)
             * and remove pairs of original and negated variable from cycle
             */
            SCIP_CALL( cleanCycle(scip, pred2, incycle, incut, dijkindex-2*nbinvars, endnode-2*nbinvars, nbinvars,
                  &ncyclevars, sepadata->repaircycles, sepadata->allowmultiplecuts, &success) );
         }
         else
         {
            /* check that current node is in first partition and next node is in second partition */
            assert(dijkindex < 2 * nbinvars);
            assert(pred[dijkindex] >= 2 * nbinvars && pred[dijkindex] < 4 * nbinvars);
 
            pred2[dijkindex] = pred[dijkindex] - 2 * nbinvars;
 
            /* check whether the object found is really a cycle without sub-cycles
             * (sub-cycles may occur in case there is not violated odd cycle inequality)
             * and remove pairs of original and negated variable from cycle
             */
            SCIP_CALL( cleanCycle(scip, pred2, incycle, incut, dijkindex, endnode-2*nbinvars, nbinvars, &ncyclevars,
                  sepadata->repaircycles, sepadata->allowmultiplecuts, &success) );
         }
      }
 
      if( success )
      {
         GRAPHDATA graphdata;
 
         /* generate cut */
         graphdata.usegls = TRUE;
         graphdata.dijkstragraph = &graph;
         graphdata.levelgraph = NULL;
 
         SCIP_CALL( generateOddCycleCut(scip, sepa, sol, vars, nbinvars, startnode, pred2, ncyclevars, incut, vals, sepadata, &graphdata, result) );
      }
   }
 
   /* free temporary memory */
   SCIPfreeBufferArray(scip, &incycle);
   SCIPfreeBufferArray(scip, &pred2);
 
   /* store the last tried root (when running without sorting the variable array, we don't want
    * to always check the same variables and therefore start next time where we stopped last time)
    */
   if( sepadata->sortswitch == UNSORTED )
   {
      if( i == 2 * nbinvars )
         sepadata->lastroot = 0;
      else
         sepadata->lastroot = (int) i;
   }
 
 TERMINATE:
   /* free temporary memory */
   SCIPfreeBufferArray(scip, &order);
   SCIPfreeBufferArray(scip, &entry);
   SCIPfreeBufferArray(scip, &pred);
   SCIPfreeBufferArray(scip, &dist);
   SCIPfreeBufferArray(scip, &graph.weight);
   SCIPfreeBufferArray(scip, &graph.head);
   SCIPfreeBufferArray(scip, &graph.outcnt);
   SCIPfreeBufferArray(scip, &graph.outbeg);
   SCIPfreeBufferArray(scip, &incut);
   SCIPfreeBufferArray(scip, &(sepadata->mapping));
   SCIPfreeBufferArray(scip, &vals);
   SCIPfreeBufferArray(scip, &vars);
 
   return SCIP_OKAY;
}
 
 
/** separation method */
static
SCIP_RETCODE separateOddCycles(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_SEPA*            sepa,               /**< separator */
   SCIP_SOL*             sol,                /**< given primal solution */
   int                   depth,              /**< current depth */
   SCIP_RESULT*          result              /**< pointer to store the result of the separation call */
   )
{
   SCIP_SEPADATA* sepadata;
   int ncalls;
   SCIPdebug( int oldnliftedcuts; )
   int nfrac = 0;
 
   *result = SCIP_DIDNOTRUN;
 
   /* get separator data */
   sepadata = SCIPsepaGetData(sepa);
   assert(sepadata != NULL);
 
   ncalls = SCIPsepaGetNCallsAtNode(sepa);
 
   /* only call separator a given number of rounds at each b&b node */
   if( (depth == 0 && sepadata->maxroundsroot >= 0 && ncalls >= sepadata->maxroundsroot)
      || (depth > 0 && sepadata->maxrounds >= 0 && ncalls >= sepadata->maxrounds) )
      return SCIP_OKAY;
 
   /* only call separator if enough binary variables are present */
   if( SCIPgetNBinVars(scip) < 3 || (! sepadata->includetriangles && SCIPgetNBinVars(scip) < 5) )
   {
      SCIPdebugMsg(scip, "skipping separator: not enough binary variables\n");
      return SCIP_OKAY;
   }
 
   /* only call separator if enough fractional variables are present */
   if ( sol != NULL )
   {
      SCIP_VAR** vars;
      SCIP_Real solval;
      int nvars;
      int v;
 
      SCIP_CALL( SCIPgetVarsData(scip, &vars, &nvars, NULL, NULL, NULL, NULL) );
 
      /* first compute fractional variables */
      for( v = 0; v < nvars; ++v )
      {
         solval = SCIPgetSolVal(scip, sol, vars[v]);
 
         if ( ! SCIPisFeasIntegral(scip, solval) )
            ++nfrac;
      }
   }
   else
      nfrac = SCIPgetNLPBranchCands(scip);
 
   if( nfrac < 3 || (! sepadata->includetriangles && nfrac < 5) )
   {
      SCIPdebugMsg(scip, "skipping separator: not enough fractional variables\n");
      return SCIP_OKAY;
   }
 
   /* only call separator if enough implications and cliques are present */
   if( SCIPgetNImplications(scip) + SCIPgetNCliques(scip) < 3 )
   {
      SCIPdebugMsg(scip, "skipping separator: not enough implications present\n");
      return SCIP_OKAY;
   }
 
   /* only run if number of cuts already found is small enough */
   if ( sepadata->cutthreshold >= 0 && SCIPgetNCutsFoundRound(scip) >= sepadata->cutthreshold )
      return SCIP_OKAY;
 
   /* store node number and reset number of unsuccessful calls */
   if ( sepadata->lastnode != SCIPnodeGetNumber(SCIPgetCurrentNode(scip)) )
   {
      sepadata->nunsucessfull = 0;
      sepadata->lastnode = SCIPnodeGetNumber(SCIPgetCurrentNode(scip));
   }
   else
   {
      if ( sepadata->nunsucessfull > sepadata->maxunsucessfull )
      {
         SCIPdebugMsg(scip, "skipping separator: number of unsucessfull calls = %d.\n", sepadata->nunsucessfull);
         return SCIP_OKAY;
      }
   }
 
   *result = SCIP_DIDNOTFIND;
   sepadata->oldncuts = sepadata->ncuts;
   SCIPdebug( oldnliftedcuts = sepadata->nliftedcuts; )
 
   if( depth == 0 )
      sepadata->maxsepacutsround = sepadata->maxsepacutsroot;
   else
      sepadata->maxsepacutsround = sepadata->maxsepacuts;
 
   /* perform the actual separation routines */
   if( sepadata->usegls )
   {
      SCIPdebugMsg(scip, "using GLS method for finding odd cycles\n");
      SCIP_CALL( separateGLS(scip, sepa, sepadata, sol, result) );
   }
   else
   {
      SCIPdebugMsg(scip, "using level graph heuristic for finding odd cycles\n");
      SCIP_CALL( separateHeur(scip, sepa, sepadata, sol, result) );
   }
 
   if( sepadata->ncuts - sepadata->oldncuts > 0 )
   {
      SCIPdebug( SCIPdebugMsg(scip, "added %u cuts (%d allowed), %d lifted.\n", sepadata->ncuts - sepadata->oldncuts,
         sepadata->maxsepacutsround, sepadata->nliftedcuts - oldnliftedcuts); )
      sepadata->nunsucessfull = 0;
   }
   else
   {
      SCIPdebugMsg(scip, "no cuts added (%d allowed)\n", sepadata->maxsepacutsround);
      ++sepadata->nunsucessfull;
   }
   SCIPdebugMsg(scip, "total sepatime: %.2f - total number of added cuts: %u\n", SCIPsepaGetTime(sepa), sepadata->ncuts);
 
   return SCIP_OKAY;
}
 
 
/*
 * Callback methods of separator
 */
 
/** copy method for separator plugins (called when SCIP copies plugins) */
static
SCIP_DECL_SEPACOPY(sepaCopyOddcycle)
{  /*lint --e{715}*/
   assert(scip != NULL);
   assert(sepa != NULL);
 
   SCIP_STRINGEQ( SCIPsepaGetName(sepa), SEPA_NAME, SCIP_INVALIDCALL );
 
   /* call inclusion method of constraint handler */
   SCIP_CALL( SCIPincludeSepaOddcycle(scip) );
 
   return SCIP_OKAY;
}
 
 
/** destructor of separator to free user data (called when SCIP is exiting) */
static
SCIP_DECL_SEPAFREE(sepaFreeOddcycle)
{
   SCIP_SEPADATA* sepadata;
 
   sepadata = SCIPsepaGetData(sepa);
   assert(sepadata != NULL);
 
   SCIPfreeBlockMemory(scip, &sepadata);
   SCIPsepaSetData(sepa, NULL);
 
   return SCIP_OKAY;
}
 
 
/** initialization method of separator (called after problem was transformed) */
static
SCIP_DECL_SEPAINIT(sepaInitOddcycle)
{
   SCIP_SEPADATA* sepadata;
 
   sepadata = SCIPsepaGetData(sepa);
   assert(sepadata != NULL);
 
   sepadata->ncuts = 0;
   sepadata->oldncuts = 0;
   sepadata->nliftedcuts = 0;
   sepadata->lastroot = 0;
 
   return SCIP_OKAY;
}
 
 
/** solving process initialization method of separator (called when branch and bound process is about to begin) */
static
SCIP_DECL_SEPAINITSOL(sepaInitsolOddcycle)
{
   SCIP_SEPADATA* sepadata;
 
   assert(sepa != NULL);
 
   sepadata = SCIPsepaGetData(sepa);
   assert(sepadata != NULL);
 
   sepadata->nunsucessfull = 0;
   sepadata->lastnode = -1;
 
   return SCIP_OKAY;
}
 
 
/** LP solution separation method of separator */
static
SCIP_DECL_SEPAEXECLP(sepaExeclpOddcycle)
{  /*lint --e{715}*/
   assert(sepa != NULL);
   assert(scip != NULL);
   assert(result != NULL);
 
   SCIP_STRINGEQ( SCIPsepaGetName(sepa), SEPA_NAME, SCIP_INVALIDCALL );
 
   SCIP_CALL( separateOddCycles(scip, sepa, NULL, depth, result) );
 
   return SCIP_OKAY;
}
 
/** arbitrary primal solution separation method of separator */
static
SCIP_DECL_SEPAEXECSOL(sepaExecsolOddcycle)
{  /*lint --e{715}*/
   assert(sepa != NULL);
   assert(scip != NULL);
   assert(result != NULL);
 
   SCIP_STRINGEQ( SCIPsepaGetName(sepa), SEPA_NAME, SCIP_INVALIDCALL );
 
   SCIP_CALL( separateOddCycles(scip, sepa, sol, depth, result) );
 
   return SCIP_OKAY;
}
 
 
/*
 * separator specific interface methods
 */
 
/** creates the oddcycle separator and includes it in SCIP */
SCIP_RETCODE SCIPincludeSepaOddcycle(
   SCIP*                 scip                /**< SCIP data structure */
   )
{
   SCIP_SEPADATA* sepadata;
   SCIP_SEPA* sepa;
 
   /* create oddcycle separator data */
   SCIP_CALL( SCIPallocBlockMemory(scip, &sepadata) );
   sepadata->nunsucessfull = 0;
   sepadata->lastnode = -1;
 
   /* include separator */
   SCIP_CALL( SCIPincludeSepaBasic(scip, &sepa, SEPA_NAME, SEPA_DESC, SEPA_PRIORITY, SEPA_FREQ, SEPA_MAXBOUNDDIST,
         SEPA_USESSUBSCIP, SEPA_DELAY,
         sepaExeclpOddcycle, sepaExecsolOddcycle,
         sepadata) );
 
   assert(sepa != NULL);
 
   /* set non-NULL pointers to callback methods */
   SCIP_CALL( SCIPsetSepaCopy(scip, sepa, sepaCopyOddcycle) );
   SCIP_CALL( SCIPsetSepaFree(scip, sepa, sepaFreeOddcycle) );
   SCIP_CALL( SCIPsetSepaInit(scip, sepa, sepaInitOddcycle) );
   SCIP_CALL( SCIPsetSepaInitsol(scip, sepa, sepaInitsolOddcycle) );
 
   /* add oddcycle separator parameters */
   SCIP_CALL( SCIPaddBoolParam(scip, "separating/" SEPA_NAME "/usegls",
         "Should the search method by Groetschel, Lovasz, Schrijver be used? Otherwise use levelgraph method by Hoffman, Padberg.",
         &sepadata->usegls, FALSE, DEFAULT_USEGLS, NULL, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip, "separating/" SEPA_NAME "/liftoddcycles",
         "Should odd cycle cuts be lifted?",
         &sepadata->liftoddcycles, FALSE, DEFAULT_LIFTODDCYCLES, NULL, NULL) );
 
   SCIP_CALL( SCIPaddIntParam(scip, "separating/" SEPA_NAME "/maxsepacuts",
         "maximal number of oddcycle cuts separated per separation round",
         &sepadata->maxsepacuts, FALSE, DEFAULT_MAXSEPACUTS, 0, INT_MAX, NULL, NULL) );
 
   SCIP_CALL( SCIPaddIntParam(scip, "separating/" SEPA_NAME "/maxsepacutsroot",
         "maximal number of oddcycle cuts separated per separation round in the root node",
         &sepadata->maxsepacutsroot, FALSE, DEFAULT_MAXSEPACUTSROOT, 0, INT_MAX, NULL, NULL) );
 
   /* add advanced parameters */
   SCIP_CALL( SCIPaddIntParam(scip, "separating/" SEPA_NAME "/maxrounds",
         "maximal number of oddcycle separation rounds per node (-1: unlimited)",
         &sepadata->maxrounds, FALSE, DEFAULT_MAXROUNDS, -1, INT_MAX, NULL, NULL) );
 
   SCIP_CALL( SCIPaddIntParam(scip, "separating/" SEPA_NAME "/maxroundsroot",
         "maximal number of oddcycle separation rounds in the root node (-1: unlimited)",
         &sepadata->maxroundsroot, FALSE, DEFAULT_MAXROUNDSROOT, -1, INT_MAX, NULL, NULL) );
 
   SCIP_CALL( SCIPaddIntParam(scip, "separating/" SEPA_NAME "/scalingfactor",
         "factor for scaling of the arc-weights",
         &sepadata->scale, TRUE, DEFAULT_SCALEFACTOR, 1, INT_MAX, NULL, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip, "separating/" SEPA_NAME "/addselfarcs",
         "add links between a variable and its negated",
         &sepadata->addselfarcs, TRUE, DEFAULT_ADDSELFARCS, NULL, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip, "separating/" SEPA_NAME "/repaircycles",
         "try to repair violated cycles with double appearance of a variable",
         &sepadata->repaircycles, TRUE, DEFAULT_REPAIRCYCLES, NULL, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip, "separating/" SEPA_NAME "/includetriangles",
         "separate triangles found as 3-cycles or repaired larger cycles",
         &sepadata->includetriangles, TRUE, DEFAULT_INCLUDETRIANGLES, NULL, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip, "separating/" SEPA_NAME "/multiplecuts",
         "Even if a variable is already covered by a cut, still try it as start node for a cycle search?",
         &sepadata->multiplecuts, TRUE, DEFAULT_MULTIPLECUTS, NULL, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip, "separating/" SEPA_NAME "/allowmultiplecuts",
         "Even if a variable is already covered by a cut, still allow another cut to cover it too?",
         &sepadata->allowmultiplecuts, TRUE, DEFAULT_ALLOWMULTIPLECUTS, NULL, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip, "separating/" SEPA_NAME "/lpliftcoef",
         "Choose lifting candidate by coef*lpvalue or only by coef?",
         &sepadata->lpliftcoef, TRUE, DEFAULT_LPLIFTCOEF, NULL, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip, "separating/" SEPA_NAME "/recalcliftcoef",
         "Calculate lifting coefficient of every candidate in every step (or only if its chosen)?",
         &sepadata->recalcliftcoef, TRUE, DEFAULT_RECALCLIFTCOEF, NULL, NULL) );
 
   SCIP_CALL( SCIPaddIntParam(scip, "separating/" SEPA_NAME "/sortswitch",
         "use sorted variable array (unsorted(0), maxlp(1), minlp(2), maxfrac(3), minfrac(4))",
         (int*) &sepadata->sortswitch, TRUE, DEFAULT_SORTSWITCH, 0, 4, NULL, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip, "separating/" SEPA_NAME "/sortrootneighbors",
         "sort level of the root neighbors by fractionality (maxfrac)",
         &sepadata->sortrootneighbors, TRUE, DEFAULT_SORTROOTNEIGHBORS, NULL, NULL) );
 
   SCIP_CALL( SCIPaddIntParam(scip, "separating/" SEPA_NAME "/percenttestvars",
         "percentage of variables to try the chosen method on [0-100]",
         &sepadata->percenttestvars, TRUE, DEFAULT_PERCENTTESTVARS, 0, 100, NULL, NULL) );
 
   SCIP_CALL( SCIPaddIntParam(scip, "separating/" SEPA_NAME "/offsettestvars",
         "offset of variables to try the chosen method on (additional to the percentage of testvars)",
         &sepadata->offsettestvars, TRUE, DEFAULT_OFFSETTESTVARS, 0, INT_MAX, NULL, NULL) );
 
   SCIP_CALL( SCIPaddIntParam(scip, "separating/" SEPA_NAME "/maxpernodeslevel",
         "percentage of nodes allowed in the same level of the level graph [0-100]",
         &sepadata->maxpernodeslevel, TRUE, DEFAULT_MAXPERNODESLEVEL, 0, 100, NULL, NULL) );
 
   SCIP_CALL( SCIPaddIntParam(scip, "separating/" SEPA_NAME "/offsetnodeslevel",
         "offset of nodes allowed in the same level of the level graph (additional to the percentage of levelnodes)",
         &sepadata->offsetnodeslevel, TRUE, DEFAULT_OFFSETNODESLEVEL, 0, INT_MAX, NULL, NULL) );
 
   SCIP_CALL( SCIPaddIntParam(scip, "separating/" SEPA_NAME "/maxnlevels",
         "maximal number of levels in level graph",
         &sepadata->maxnlevels, TRUE, DEFAULT_MAXNLEVELS, 0, INT_MAX, NULL, NULL) );
 
   SCIP_CALL( SCIPaddIntParam(scip, "separating/" SEPA_NAME "/maxcutsroot",
         "maximal number of oddcycle cuts generated per chosen variable as root of the level graph",
         &sepadata->maxcutsroot, TRUE, DEFAULT_MAXCUTSROOT, 0, INT_MAX, NULL, NULL) );
 
   SCIP_CALL( SCIPaddIntParam(scip, "separating/" SEPA_NAME "/maxcutslevel",
         "maximal number of oddcycle cuts generated in every level of the level graph",
         &sepadata->maxcutslevel, TRUE, DEFAULT_MAXCUTSLEVEL, 0, INT_MAX, NULL, NULL) );
 
   SCIP_CALL( SCIPaddIntParam(scip, "separating/" SEPA_NAME "/maxreference",
         "minimal weight on an edge (in level graph or bipartite graph)",
         &sepadata->maxreference, TRUE, DEFAULT_MAXREFERENCE, 0, INT_MAX, NULL, NULL) );
 
   SCIP_CALL( SCIPaddIntParam(scip, "separating/" SEPA_NAME "/maxunsucessfull",
         "number of unsuccessful calls at current node",
         &sepadata->maxunsucessfull, TRUE, DEFAULT_MAXUNSUCESSFULL, 0, INT_MAX, NULL, NULL) );
 
   SCIP_CALL( SCIPaddIntParam(scip, "separating/" SEPA_NAME "/cutthreshold",
         "maximal number of other cuts s.t. separation is applied (-1 for direct call)",
         &sepadata->cutthreshold, TRUE, DEFAULT_CUTTHRESHOLD, -1, INT_MAX, NULL, NULL) );
 
   return SCIP_OKAY;
}