Scippy

SCIP

Solving Constraint Integer Programs

Detailed Description

event handler for solving phase dependent parameter adjustment

Author
Gregor Hendel

this event handler provides methods to support parameter adjustment at every new of the three solving phases:

  • Feasibility phase - before the first solution is found
  • Improvement phase - after the first solution was found until an optimal solution is found or believed to be found
  • Proof phase - the remaining time of the solution process after an optimal or believed-to-be optimal incumbent has been found.

Of course, this event handler cannot detect by itself whether a given incumbent is optimal prior to termination of the solution process. It rather uses heuristic transitions based on properties of the search tree in order to determine the appropriate stage. Settings files can be passed to this event handler for each of the three phases.

This approach of phase-based parameter adjustment was first presented in

Gregor Hendel Empirical Analysis of Solving Phases in Mixed-Integer Programming Master thesis, Technical University Berlin (2014)

with the main results also available from

Gregor Hendel Exploiting solving phases in mixed-integer programs (2015)

Definition in file event_solvingphase.c.

#include "scip/event_solvingphase.h"
#include "scip/pub_disp.h"
#include "scip/pub_event.h"
#include "scip/pub_message.h"
#include "scip/pub_misc.h"
#include "scip/pub_misc_sort.h"
#include "scip/pub_paramset.h"
#include "scip/pub_tree.h"
#include "scip/scip_disp.h"
#include "scip/scip_event.h"
#include "scip/scip_general.h"
#include "scip/scip_mem.h"
#include "scip/scip_message.h"
#include "scip/scip_numerics.h"
#include "scip/scip_param.h"
#include "scip/scip_sol.h"
#include "scip/scip_solve.h"
#include "scip/scip_solvingstats.h"
#include "scip/scip_timing.h"
#include "scip/scip_tree.h"
#include <string.h>

Go to the source code of this file.

Data Structures

struct  DepthInfo
 

Macros

#define EVENTHDLR_NAME   "solvingphase"
 
#define EVENTHDLR_DESC   "event handler to adjust settings depending on current stage"
 
#define EVENTHDLR_EVENT   SCIP_EVENTTYPE_BESTSOLFOUND | SCIP_EVENTTYPE_NODEBRANCHED | SCIP_EVENTTYPE_NODEFOCUSED
 
#define TRANSITIONMETHODS   "elor"
 
#define DEFAULT_SETNAME   "-"
 
#define DEFAULT_TRANSITIONMETHOD   'r'
 
#define DEFAULT_NODEOFFSET   50L
 
#define DEFAULT_FALLBACK   FALSE
 
#define DEFAULT_INTERRUPTOPTIMAL   FALSE
 
#define DEFAULT_ENABLED   FALSE
 
#define DEFAULT_TESTMODE   FALSE
 
#define DEFAULT_USERESTART1TO2   FALSE
 
#define DEFAULT_USERESTART2TO3   FALSE
 
#define DEFAULT_USEEMPHSETTINGS   TRUE
 
#define DEFAULT_LOGREGRESSION_XTYPE   'n'
 
#define LOGREGRESSION_XTYPES   "lnt"
 
#define eventCopySolvingphase   NULL
 
#define DISP_NAME_NRANK1NODES   "nrank1nodes"
 
#define DISP_DESC_NRANK1NODES   "current number of rank1 nodes left"
 
#define DISP_HEAD_NRANK1NODES   "rank1"
 
#define DISP_WIDT_NRANK1NODES   7
 
#define DISP_PRIO_NRANK1NODES   40000
 
#define DISP_POSI_NRANK1NODES   500
 
#define DISP_STRI_NRANK1NODES   TRUE
 
#define DISP_NAME_NNODESBELOWINC   "nnodesbelowinc"
 
#define DISP_DESC_NNODESBELOWINC   "current number of nodes with an estimate better than the current incumbent"
 
#define DISP_HEAD_NNODESBELOWINC   "nbInc"
 
#define DISP_WIDT_NNODESBELOWINC   6
 
#define DISP_PRIO_NNODESBELOWINC   40000
 
#define DISP_POSI_NNODESBELOWINC   550
 
#define DISP_STRI_NNODESBELOWINC   TRUE
 

Typedefs

typedef enum SolvingPhase SOLVINGPHASE
 
typedef struct DepthInfo DEPTHINFO
 

Enumerations

enum  SolvingPhase {
  SOLVINGPHASE_UNINITIALIZED = -1,
  SOLVINGPHASE_FEASIBILITY = 0,
  SOLVINGPHASE_IMPROVEMENT = 1,
  SOLVINGPHASE_PROOF = 2
}
 

Functions

static SCIP_DECL_SORTPTRCOMP (sortCompTreeinfo)
 
static SCIP_RETCODE addNodesInformation (SCIP *scip, SCIP_EVENTHDLRDATA *eventhdlrdata, SCIP_NODE **nodes, int nnodes)
 
static void removeNode (SCIP_NODE *node, SCIP_EVENTHDLRDATA *eventhdlrdata)
 
static int getNRank1Nodes (SCIP *scip)
 
static int getNNodesBelowIncumbent (SCIP *scip)
 
static SCIP_RETCODE recomputeNodeInformation (SCIP *scip, SCIP_EVENTHDLRDATA *eventhdlrdata)
 
static SCIP_RETCODE createDepthinfo (SCIP *scip, DEPTHINFO **depthinfo)
 
static SCIP_RETCODE freeDepthinfo (SCIP *scip, DEPTHINFO **depthinfo)
 
static void releaseNodeFromDepthInfo (SCIP *scip, SCIP_EVENTHDLRDATA *eventhdlrdata, SCIP_NODE *node)
 
static SCIP_RETCODE ensureDepthInfoArraySize (SCIP *scip, SCIP_EVENTHDLRDATA *eventhdlrdata, SCIP_NODE *node)
 
static SCIP_RETCODE releaseNodeInformation (SCIP *scip, SCIP_EVENTHDLRDATA *eventhdlrdata, SCIP_NODE *node)
 
static int checkLeavesBelowIncumbent (SCIP *scip)
 
static SCIP_Real getX (SCIP *scip, SCIP_EVENTHDLRDATA *eventhdlrdata)
 
static SCIP_Real getCurrentRegressionTangentAxisIntercept (SCIP *scip, SCIP_EVENTHDLRDATA *eventhdlrdata)
 
static SCIP_Bool checkRankOneTransition (SCIP *scip, SCIP_EVENTHDLRDATA *eventhdlrdata)
 
static SCIP_Bool checkEstimateCriterion (SCIP *scip, SCIP_EVENTHDLRDATA *eventhdlrdata)
 
static SCIP_Bool checkLogCriterion (SCIP *scip, SCIP_EVENTHDLRDATA *eventhdlrdata)
 
static SCIP_Bool checkOptimalSolution (SCIP *scip, SCIP_EVENTHDLRDATA *eventhdlrdata)
 
static SCIP_Bool transitionPhase3 (SCIP *scip, SCIP_EVENTHDLRDATA *eventhdlrdata)
 
static void determineSolvingPhase (SCIP *scip, SCIP_EVENTHDLRDATA *eventhdlrdata)
 
static SCIP_RETCODE changeEmphasisParameters (SCIP *scip, SCIP_EVENTHDLRDATA *eventhdlrdata)
 
static SCIP_RETCODE changeParametersUsingSettingsFiles (SCIP *scip, SCIP_EVENTHDLRDATA *eventhdlrdata)
 
static SCIP_RETCODE fixOrUnfixRelevantParameters (SCIP *scip, SCIP_EVENTHDLRDATA *eventhdlrdata, SCIP_Bool fix)
 
static SCIP_RETCODE adaptSolverBehavior (SCIP *scip, SCIP_EVENTHDLRDATA *eventhdlrdata)
 
static SCIP_RETCODE applySolvingPhase (SCIP *scip, SCIP_EVENTHDLRDATA *eventhdlrdata)
 
static SCIP_RETCODE updateLogRegression (SCIP *scip, SCIP_EVENTHDLRDATA *eventhdlrdata)
 
static SCIP_RETCODE updateDataStructures (SCIP *scip, SCIP_EVENTHDLRDATA *eventhdlrdata, SCIP_EVENTTYPE eventtype)
 
static void testCriteria (SCIP *scip, SCIP_EVENTHDLRDATA *eventhdlrdata)
 
static SCIP_DECL_EVENTFREE (eventFreeSolvingphase)
 
static SCIP_DECL_EVENTINITSOL (eventInitsolSolvingphase)
 
static SCIP_DECL_EVENTEXITSOL (eventExitsolSolvingphase)
 
static SCIP_RETCODE collectNondefaultParams (SCIP *scip, SCIP_EVENTHDLRDATA *eventhdlrdata)
 
static SCIP_DECL_EVENTINIT (eventInitSolvingphase)
 
static SCIP_DECL_EVENTEXIT (eventExitSolvingphase)
 
static SCIP_DECL_EVENTEXEC (eventExecSolvingphase)
 
static SCIP_DECL_DISPOUTPUT (dispOutputNRank1Nodes)
 
static SCIP_DECL_DISPOUTPUT (dispOutputNnodesbelowinc)
 
SCIP_RETCODE SCIPincludeEventHdlrSolvingphase (SCIP *scip)
 

Macro Definition Documentation

◆ EVENTHDLR_NAME

◆ EVENTHDLR_DESC

#define EVENTHDLR_DESC   "event handler to adjust settings depending on current stage"

Definition at line 67 of file event_solvingphase.c.

Referenced by SCIPincludeEventHdlrSolvingphase().

◆ EVENTHDLR_EVENT

the actual event to be caught

Definition at line 69 of file event_solvingphase.c.

Referenced by SCIP_DECL_EVENTEXEC(), and SCIP_DECL_EVENTINIT().

◆ TRANSITIONMETHODS

#define TRANSITIONMETHODS   "elor"

which heuristic transition method: (e)stimate based, (l)ogarithmic regression based, (o)ptimal value based (cheat!), (r)ank-1 node based?

Definition at line 70 of file event_solvingphase.c.

Referenced by SCIPincludeEventHdlrSolvingphase().

◆ DEFAULT_SETNAME

#define DEFAULT_SETNAME   "-"

default settings file name for solving phase setting files

Definition at line 73 of file event_solvingphase.c.

Referenced by changeParametersUsingSettingsFiles(), and SCIPincludeEventHdlrSolvingphase().

◆ DEFAULT_TRANSITIONMETHOD

#define DEFAULT_TRANSITIONMETHOD   'r'

the default transition method

Definition at line 74 of file event_solvingphase.c.

Referenced by SCIPincludeEventHdlrSolvingphase().

◆ DEFAULT_NODEOFFSET

#define DEFAULT_NODEOFFSET   50L

default node offset before transition to proof phase is active

Definition at line 75 of file event_solvingphase.c.

Referenced by SCIPincludeEventHdlrSolvingphase().

◆ DEFAULT_FALLBACK

#define DEFAULT_FALLBACK   FALSE

should the phase transition fall back to suboptimal phase?

Definition at line 76 of file event_solvingphase.c.

Referenced by SCIPincludeEventHdlrSolvingphase().

◆ DEFAULT_INTERRUPTOPTIMAL

#define DEFAULT_INTERRUPTOPTIMAL   FALSE

should solving process be interrupted if optimal solution was found?

Definition at line 77 of file event_solvingphase.c.

Referenced by SCIPincludeEventHdlrSolvingphase().

◆ DEFAULT_ENABLED

#define DEFAULT_ENABLED   FALSE

should the event handler be executed?

Definition at line 79 of file event_solvingphase.c.

Referenced by SCIPincludeEventHdlrSolvingphase().

◆ DEFAULT_TESTMODE

#define DEFAULT_TESTMODE   FALSE

should the event handler test the criteria?

Definition at line 80 of file event_solvingphase.c.

Referenced by SCIPincludeEventHdlrSolvingphase().

◆ DEFAULT_USERESTART1TO2

#define DEFAULT_USERESTART1TO2   FALSE

should a restart be applied between the feasibility and improvement phase?

Definition at line 82 of file event_solvingphase.c.

Referenced by SCIPincludeEventHdlrSolvingphase().

◆ DEFAULT_USERESTART2TO3

#define DEFAULT_USERESTART2TO3   FALSE

should a restart be applied between the improvement and the proof phase?

Definition at line 83 of file event_solvingphase.c.

Referenced by SCIPincludeEventHdlrSolvingphase().

◆ DEFAULT_USEEMPHSETTINGS

#define DEFAULT_USEEMPHSETTINGS   TRUE

should emphasis settings be used for the different solving phases, or settings files?

Definition at line 84 of file event_solvingphase.c.

Referenced by SCIPincludeEventHdlrSolvingphase().

◆ DEFAULT_LOGREGRESSION_XTYPE

#define DEFAULT_LOGREGRESSION_XTYPE   'n'

default type to use for log regression - (t)ime, (n)odes, (l)p iterations

Definition at line 87 of file event_solvingphase.c.

Referenced by SCIPincludeEventHdlrSolvingphase().

◆ LOGREGRESSION_XTYPES

#define LOGREGRESSION_XTYPES   "lnt"

available types for log regression - (t)ime, (n)odes, (l)p iterations

Definition at line 88 of file event_solvingphase.c.

Referenced by SCIPincludeEventHdlrSolvingphase().

◆ eventCopySolvingphase

#define eventCopySolvingphase   NULL

copy method for event handler (called when SCIP copies plugins)

Definition at line 1233 of file event_solvingphase.c.

Referenced by SCIPincludeEventHdlrSolvingphase(), and testCriteria().

◆ DISP_NAME_NRANK1NODES

#define DISP_NAME_NRANK1NODES   "nrank1nodes"

◆ DISP_DESC_NRANK1NODES

#define DISP_DESC_NRANK1NODES   "current number of rank1 nodes left"

Definition at line 1455 of file event_solvingphase.c.

Referenced by SCIPincludeEventHdlrSolvingphase().

◆ DISP_HEAD_NRANK1NODES

#define DISP_HEAD_NRANK1NODES   "rank1"

Definition at line 1456 of file event_solvingphase.c.

Referenced by SCIPincludeEventHdlrSolvingphase().

◆ DISP_WIDT_NRANK1NODES

#define DISP_WIDT_NRANK1NODES   7

◆ DISP_PRIO_NRANK1NODES

#define DISP_PRIO_NRANK1NODES   40000

Definition at line 1458 of file event_solvingphase.c.

Referenced by SCIPincludeEventHdlrSolvingphase().

◆ DISP_POSI_NRANK1NODES

#define DISP_POSI_NRANK1NODES   500

Definition at line 1459 of file event_solvingphase.c.

Referenced by SCIPincludeEventHdlrSolvingphase().

◆ DISP_STRI_NRANK1NODES

#define DISP_STRI_NRANK1NODES   TRUE

Definition at line 1460 of file event_solvingphase.c.

Referenced by SCIPincludeEventHdlrSolvingphase().

◆ DISP_NAME_NNODESBELOWINC

#define DISP_NAME_NNODESBELOWINC   "nnodesbelowinc"

◆ DISP_DESC_NNODESBELOWINC

#define DISP_DESC_NNODESBELOWINC   "current number of nodes with an estimate better than the current incumbent"

Definition at line 1478 of file event_solvingphase.c.

Referenced by SCIPincludeEventHdlrSolvingphase().

◆ DISP_HEAD_NNODESBELOWINC

#define DISP_HEAD_NNODESBELOWINC   "nbInc"

Definition at line 1479 of file event_solvingphase.c.

Referenced by SCIPincludeEventHdlrSolvingphase().

◆ DISP_WIDT_NNODESBELOWINC

#define DISP_WIDT_NNODESBELOWINC   6

◆ DISP_PRIO_NNODESBELOWINC

#define DISP_PRIO_NNODESBELOWINC   40000

Definition at line 1481 of file event_solvingphase.c.

Referenced by SCIPincludeEventHdlrSolvingphase().

◆ DISP_POSI_NNODESBELOWINC

#define DISP_POSI_NNODESBELOWINC   550

Definition at line 1482 of file event_solvingphase.c.

Referenced by SCIPincludeEventHdlrSolvingphase().

◆ DISP_STRI_NNODESBELOWINC

#define DISP_STRI_NNODESBELOWINC   TRUE

Definition at line 1483 of file event_solvingphase.c.

Referenced by SCIPincludeEventHdlrSolvingphase().

Typedef Documentation

◆ SOLVINGPHASE

typedef enum SolvingPhase SOLVINGPHASE

Definition at line 101 of file event_solvingphase.c.

◆ DEPTHINFO

typedef struct DepthInfo DEPTHINFO

Definition at line 114 of file event_solvingphase.c.

Enumeration Type Documentation

◆ SolvingPhase

enumerator to represent the current solving phase

Enumerator
SOLVINGPHASE_UNINITIALIZED 

solving phase has not been initialized yet

SOLVINGPHASE_FEASIBILITY 

no solution was found until now

SOLVINGPHASE_IMPROVEMENT 

current incumbent solution is suboptimal

SOLVINGPHASE_PROOF 

current incumbent is optimal

Definition at line 94 of file event_solvingphase.c.

Function Documentation

◆ SCIP_DECL_SORTPTRCOMP()

static SCIP_DECL_SORTPTRCOMP ( sortCompTreeinfo  )
static

nodes are sorted first by their estimates, and if estimates are equal, by their number

Definition at line 165 of file event_solvingphase.c.

References addNodesInformation(), SCIP_Longint, SCIP_Real, SCIPnodeGetEstimate(), and SCIPnodeGetNumber().

◆ addNodesInformation()

static SCIP_RETCODE addNodesInformation ( SCIP scip,
SCIP_EVENTHDLRDATA eventhdlrdata,
SCIP_NODE **  nodes,
int  nnodes 
)
static

insert an array of open nodes (leaves/siblings/children) into the event handler data structures and update the transition information

Parameters
scipSCIP data structure
eventhdlrdataevent handler data
nodesarray of nodes
nnodesnumber of nodes

Definition at line 202 of file event_solvingphase.c.

References DepthInfo::minestimate, DepthInfo::minnodes, DepthInfo::minnodescapacity, DepthInfo::nminnodes, nnodes, DepthInfo::nsolvednodes, NULL, removeNode(), SCIP_CALL, SCIP_NODETYPE_CHILD, SCIP_NODETYPE_LEAF, SCIP_NODETYPE_SIBLING, SCIP_OKAY, SCIP_Real, SCIPgetUpperbound(), SCIPisGE(), SCIPisLT(), SCIPnodeGetDepth(), SCIPnodeGetEstimate(), SCIPnodeGetType(), SCIPreallocBlockMemoryArray, and SCIPsortedvecInsertPtr().

Referenced by recomputeNodeInformation(), SCIP_DECL_SORTPTRCOMP(), and updateDataStructures().

◆ removeNode()

static void removeNode ( SCIP_NODE node,
SCIP_EVENTHDLRDATA eventhdlrdata 
)
static

remove a node from the data structures of the event handler

Parameters
nodenode that should be removed
eventhdlrdataevent handler data

Definition at line 260 of file event_solvingphase.c.

References getNRank1Nodes(), DepthInfo::minnodes, DepthInfo::nminnodes, NULL, SCIP_Bool, SCIPnodeGetDepth(), SCIPsortedvecDelPosPtr(), and SCIPsortedvecFindPtr().

Referenced by addNodesInformation(), and releaseNodeFromDepthInfo().

◆ getNRank1Nodes()

static int getNRank1Nodes ( SCIP scip)
static

returns the current number of rank 1 nodes in the tree

Parameters
scipSCIP data structure

Definition at line 291 of file event_solvingphase.c.

References EVENTHDLR_NAME, getNNodesBelowIncumbent(), NULL, SCIP_STAGE_SOLVING, SCIPeventhdlrGetData(), SCIPfindEventhdlr(), and SCIPgetStage().

Referenced by checkRankOneTransition(), removeNode(), SCIP_DECL_DISPOUTPUT(), and transitionPhase3().

◆ getNNodesBelowIncumbent()

static int getNNodesBelowIncumbent ( SCIP scip)
static

returns the current number of open nodes which have an estimate lower than the incumbent solution

Parameters
scipSCIP data structure

Definition at line 310 of file event_solvingphase.c.

References EVENTHDLR_NAME, NULL, recomputeNodeInformation(), SCIP_STAGE_SOLVING, SCIPeventhdlrGetData(), SCIPfindEventhdlr(), and SCIPgetStage().

Referenced by getNRank1Nodes(), and SCIP_DECL_DISPOUTPUT().

◆ recomputeNodeInformation()

static SCIP_RETCODE recomputeNodeInformation ( SCIP scip,
SCIP_EVENTHDLRDATA eventhdlrdata 
)
static

discards all previous node information and renews it

Parameters
scipSCIP data structure
eventhdlrdataevent handler data

Definition at line 329 of file event_solvingphase.c.

References addNodesInformation(), createDepthinfo(), FALSE, NULL, SCIP_CALL, SCIP_OKAY, SCIP_STAGE_SOLVING, SCIPgetOpenNodesData(), and SCIPgetStage().

Referenced by getNNodesBelowIncumbent(), releaseNodeInformation(), and updateDataStructures().

◆ createDepthinfo()

static SCIP_RETCODE createDepthinfo ( SCIP scip,
DEPTHINFO **  depthinfo 
)
static

allocates memory for a depth info

Parameters
scipSCIP data structure
depthinfopointer to depth information structure

Definition at line 376 of file event_solvingphase.c.

References freeDepthinfo(), NULL, SCIP_CALL, SCIP_OKAY, SCIPallocBlockMemory, SCIPallocBlockMemoryArray, and SCIPinfinity().

Referenced by ensureDepthInfoArraySize(), and recomputeNodeInformation().

◆ freeDepthinfo()

static SCIP_RETCODE freeDepthinfo ( SCIP scip,
DEPTHINFO **  depthinfo 
)
static

frees depth information data structure

Parameters
scipSCIP data structure
depthinfopointer to depth information structure

Definition at line 401 of file event_solvingphase.c.

References NULL, releaseNodeFromDepthInfo(), SCIP_OKAY, SCIPfreeBlockMemory, and SCIPfreeBlockMemoryArray.

Referenced by createDepthinfo(), and SCIP_DECL_EVENTEXITSOL().

◆ releaseNodeFromDepthInfo()

static void releaseNodeFromDepthInfo ( SCIP scip,
SCIP_EVENTHDLRDATA eventhdlrdata,
SCIP_NODE node 
)
static

removes the node itself and updates the data if this node defined an active estimate globally or locally at its depth level

Parameters
scipSCIP data structure
eventhdlrdataevent handler data
nodenode to be removed from the data structures of the event handler

Definition at line 420 of file event_solvingphase.c.

References ensureDepthInfoArraySize(), DepthInfo::minestimate, DepthInfo::minnodes, DepthInfo::nminnodes, DepthInfo::nsolvednodes, NULL, removeNode(), SCIPgetUpperbound(), SCIPisGT(), SCIPisLT(), SCIPnodeGetDepth(), and SCIPnodeGetEstimate().

Referenced by freeDepthinfo(), and releaseNodeInformation().

◆ ensureDepthInfoArraySize()

static SCIP_RETCODE ensureDepthInfoArraySize ( SCIP scip,
SCIP_EVENTHDLRDATA eventhdlrdata,
SCIP_NODE node 
)
static

ensures sufficient size for depthInfo array

Parameters
scipSCIP data structure
eventhdlrdataevent handler data
nodenode to be removed from the data structures of the event handler

Definition at line 464 of file event_solvingphase.c.

References createDepthinfo(), releaseNodeInformation(), SCIP_CALL, SCIP_OKAY, SCIPallocBlockMemoryArray, SCIPnodeGetDepth(), and SCIPreallocBlockMemoryArray.

Referenced by releaseNodeFromDepthInfo(), and releaseNodeInformation().

◆ releaseNodeInformation()

static SCIP_RETCODE releaseNodeInformation ( SCIP scip,
SCIP_EVENTHDLRDATA eventhdlrdata,
SCIP_NODE node 
)
static

ensures the capacity of the event handler data structures and removes the current node

Parameters
scipSCIP data structure
eventhdlrdataevent handler data
nodenode to be removed from the data structures of the event handler

Definition at line 509 of file event_solvingphase.c.

References checkLeavesBelowIncumbent(), ensureDepthInfoArraySize(), NULL, recomputeNodeInformation(), releaseNodeFromDepthInfo(), SCIP_CALL, SCIP_OKAY, SCIPgetNDelayedCutoffs(), and SCIPgetNNodesLeft().

Referenced by ensureDepthInfoArraySize(), and updateDataStructures().

◆ checkLeavesBelowIncumbent()

static int checkLeavesBelowIncumbent ( SCIP scip)
static

ensures correctness of counters by explicitly summing up all children, leaves, and siblings with small estimates

Definition at line 544 of file event_solvingphase.c.

References getX(), nnodes, SCIP_OKAY, SCIP_Real, SCIPgetChildren(), SCIPgetLeaves(), SCIPgetNNodesLeft(), SCIPgetSiblings(), SCIPgetUpperbound(), SCIPisLT(), and SCIPnodeGetEstimate().

Referenced by releaseNodeInformation(), and updateDataStructures().

◆ getX()

static SCIP_Real getX ( SCIP scip,
SCIP_EVENTHDLRDATA eventhdlrdata 
)
static

get the point of the X axis for the regression according to the user choice of X type (time/nodes/iterations)

Parameters
scipSCIP data structure
eventhdlrdataevent handler data

Definition at line 592 of file event_solvingphase.c.

References getCurrentRegressionTangentAxisIntercept(), log(), MAX, SCIP_Real, SCIP_STAGE_SOLVED, SCIP_STAGE_SOLVING, SCIPgetNLPIterations(), SCIPgetNTotalNodes(), SCIPgetSolvingTime(), SCIPgetStage(), and x.

Referenced by checkLeavesBelowIncumbent(), getCurrentRegressionTangentAxisIntercept(), and updateLogRegression().

◆ getCurrentRegressionTangentAxisIntercept()

static SCIP_Real getCurrentRegressionTangentAxisIntercept ( SCIP scip,
SCIP_EVENTHDLRDATA eventhdlrdata 
)
static

get axis intercept of current tangent to logarithmic regression curve

Parameters
scipSCIP data structure
eventhdlrdataevent handler data structure

Definition at line 637 of file event_solvingphase.c.

References checkRankOneTransition(), getX(), NULL, SCIP_Bool, SCIP_Real, SCIPinfinity(), SCIPregressionGetIntercept(), SCIPregressionGetNObservations(), and SCIPregressionGetSlope().

Referenced by checkLogCriterion(), and getX().

◆ checkRankOneTransition()

static SCIP_Bool checkRankOneTransition ( SCIP scip,
SCIP_EVENTHDLRDATA eventhdlrdata 
)
static

checks if rank-1 transition has been reached, that is, when all open nodes have a best-estimate higher than the best previously checked node at this depth

Parameters
scipSCIP data structure
eventhdlrdataevent handler data

Definition at line 670 of file event_solvingphase.c.

References checkEstimateCriterion(), FALSE, getNRank1Nodes(), SCIP_Bool, SCIPgetNNodes(), and SCIPgetNSols().

Referenced by getCurrentRegressionTangentAxisIntercept(), testCriteria(), and transitionPhase3().

◆ checkEstimateCriterion()

static SCIP_Bool checkEstimateCriterion ( SCIP scip,
SCIP_EVENTHDLRDATA eventhdlrdata 
)
static

check if Best-Estimate criterion was reached, that is, when the active estimate is not better than the current incumbent solution

Parameters
scipSCIP data structure
eventhdlrdataevent handler data

Definition at line 684 of file event_solvingphase.c.

References checkLogCriterion(), FALSE, SCIP_Bool, SCIP_STAGE_SOLVING, SCIPgetNNodes(), SCIPgetNSols(), and SCIPgetStage().

Referenced by checkRankOneTransition(), testCriteria(), and transitionPhase3().

◆ checkLogCriterion()

static SCIP_Bool checkLogCriterion ( SCIP scip,
SCIP_EVENTHDLRDATA eventhdlrdata 
)
static

check if logarithmic phase transition has been reached.

the logarithmic phase transition is reached when the slope of the logarithmic primal progress (as a function of the number of LP iterations or solving nodes) becomes gentle. More concretely, we measure the slope by calculating the axis intercept of the tangent of the logarithmic primal progress. We then compare this axis intercept to the first and current primal bound and say that the logarithmic phase transition is reached as soon as the axis intercept passes the current primal bound so that the scalar becomes negative.

While it would be enough to directly compare the primal bound and the axis intercept of the tangent to check the criterion, the scalar allows for a continuous indicator how far the phase transition is still ahead

Parameters
scipSCIP data structure
eventhdlrdataevent handler data

Definition at line 709 of file event_solvingphase.c.

References checkOptimalSolution(), FALSE, getCurrentRegressionTangentAxisIntercept(), SCIP_Bool, SCIP_Real, SCIPgetFirstPrimalBound(), SCIPgetNSols(), SCIPgetPrimalbound(), SCIPisInfinity(), SCIPisNegative(), and TRUE.

Referenced by checkEstimateCriterion(), testCriteria(), and transitionPhase3().

◆ checkOptimalSolution()

static SCIP_Bool checkOptimalSolution ( SCIP scip,
SCIP_EVENTHDLRDATA eventhdlrdata 
)
static

check if incumbent solution is nearly optimal; we allow a relative deviation of 10^-9

Parameters
scipSCIP data structure
eventhdlrdataevent handler data

Definition at line 738 of file event_solvingphase.c.

References EPSZ, FALSE, REALABS, SCIP_Bool, SCIP_Real, SCIPgetPrimalbound(), SCIPisInfinity(), transitionPhase3(), and TRUE.

Referenced by checkLogCriterion(), testCriteria(), and transitionPhase3().

◆ transitionPhase3()

static SCIP_Bool transitionPhase3 ( SCIP scip,
SCIP_EVENTHDLRDATA eventhdlrdata 
)
static

◆ determineSolvingPhase()

static void determineSolvingPhase ( SCIP scip,
SCIP_EVENTHDLRDATA eventhdlrdata 
)
static
Parameters
scipSCIP data structure
eventhdlrdataevent handler data

Definition at line 822 of file event_solvingphase.c.

References changeEmphasisParameters(), SCIPgetNSols(), SOLVINGPHASE_FEASIBILITY, SOLVINGPHASE_IMPROVEMENT, SOLVINGPHASE_PROOF, and transitionPhase3().

Referenced by applySolvingPhase(), and transitionPhase3().

◆ changeEmphasisParameters()

static SCIP_RETCODE changeEmphasisParameters ( SCIP scip,
SCIP_EVENTHDLRDATA eventhdlrdata 
)
static

◆ changeParametersUsingSettingsFiles()

static SCIP_RETCODE changeParametersUsingSettingsFiles ( SCIP scip,
SCIP_EVENTHDLRDATA eventhdlrdata 
)
static

change general solving strategy of SCIP depending on the phase by reading from settings file

Parameters
scipSCIP data structure
eventhdlrdataevent handler data

Definition at line 873 of file event_solvingphase.c.

References DEFAULT_SETNAME, fixOrUnfixRelevantParameters(), NULL, SCIP_CALL, SCIP_INVALIDCALL, SCIP_OKAY, SCIP_VERBLEVEL_NORMAL, SCIPdebugMsg, SCIPreadParams(), SCIPverbMessage(), SCIPwarningMessage(), SOLVINGPHASE_FEASIBILITY, SOLVINGPHASE_IMPROVEMENT, SOLVINGPHASE_PROOF, and SOLVINGPHASE_UNINITIALIZED.

Referenced by adaptSolverBehavior(), and changeEmphasisParameters().

◆ fixOrUnfixRelevantParameters()

static SCIP_RETCODE fixOrUnfixRelevantParameters ( SCIP scip,
SCIP_EVENTHDLRDATA eventhdlrdata,
SCIP_Bool  fix 
)
static

fix/unfix relevant solving parameters that should not accidentally be set to default values

Parameters
scipSCIP data structure
eventhdlrdataevent handler data
fixshould the parameters be fixed (true) or unfixed?

Definition at line 927 of file event_solvingphase.c.

References adaptSolverBehavior(), SCIP_CALL, SCIP_OKAY, SCIPfixParam(), SCIPparamGetName(), SCIPparamIsFixed(), and SCIPunfixParam().

Referenced by adaptSolverBehavior(), and changeParametersUsingSettingsFiles().

◆ adaptSolverBehavior()

static SCIP_RETCODE adaptSolverBehavior ( SCIP scip,
SCIP_EVENTHDLRDATA eventhdlrdata 
)
static

change settings depending whether emphasis settings should be used, or settings files

Parameters
scipSCIP data structure
eventhdlrdataevent handler data

Definition at line 997 of file event_solvingphase.c.

References applySolvingPhase(), changeEmphasisParameters(), changeParametersUsingSettingsFiles(), FALSE, fixOrUnfixRelevantParameters(), SCIP_CALL, SCIP_OKAY, SCIP_PARAMEMPHASIS_DEFAULT, SCIPsetEmphasis(), and TRUE.

Referenced by applySolvingPhase(), and fixOrUnfixRelevantParameters().

◆ applySolvingPhase()

static SCIP_RETCODE applySolvingPhase ( SCIP scip,
SCIP_EVENTHDLRDATA eventhdlrdata 
)
static

◆ updateLogRegression()

static SCIP_RETCODE updateLogRegression ( SCIP scip,
SCIP_EVENTHDLRDATA eventhdlrdata 
)
static

update the logarithmic regression

Parameters
scipSCIP data structure
eventhdlrdatadata of event handler

Definition at line 1083 of file event_solvingphase.c.

References getX(), SCIP_OKAY, SCIP_Real, SCIPgetPrimalbound(), SCIPisEQ(), SCIPregressionAddObservation(), SCIPregressionRemoveObservation(), and updateDataStructures().

Referenced by applySolvingPhase(), and updateDataStructures().

◆ updateDataStructures()

static SCIP_RETCODE updateDataStructures ( SCIP scip,
SCIP_EVENTHDLRDATA eventhdlrdata,
SCIP_EVENTTYPE  eventtype 
)
static

◆ testCriteria()

static void testCriteria ( SCIP scip,
SCIP_EVENTHDLRDATA eventhdlrdata 
)
static

◆ SCIP_DECL_EVENTFREE()

static SCIP_DECL_EVENTFREE ( eventFreeSolvingphase  )
static

destructor of event handler to free user data (called when SCIP is exiting)

Definition at line 1238 of file event_solvingphase.c.

References EVENTHDLR_NAME, NULL, SCIP_DECL_EVENTINITSOL(), SCIP_OKAY, SCIPeventhdlrGetData(), SCIPeventhdlrGetName(), SCIPeventhdlrSetData(), SCIPfreeBlockMemory, and SCIPregressionFree().

◆ SCIP_DECL_EVENTINITSOL()

static SCIP_DECL_EVENTINITSOL ( eventInitsolSolvingphase  )
static

initialization method of event handler (called after problem was transformed)

Definition at line 1259 of file event_solvingphase.c.

References FALSE, NULL, SCIP_DECL_EVENTEXITSOL(), SCIP_OKAY, SCIPeventhdlrGetData(), and SCIPgetNDelayedCutoffs().

Referenced by SCIP_DECL_EVENTFREE().

◆ SCIP_DECL_EVENTEXITSOL()

static SCIP_DECL_EVENTEXITSOL ( eventExitsolSolvingphase  )
static

solving process deinitialization method of event handler (called before branch and bound process data is freed)

Definition at line 1278 of file event_solvingphase.c.

References collectNondefaultParams(), freeDepthinfo(), NULL, SCIP_CALL, SCIP_OKAY, SCIPeventhdlrGetData(), and SCIPfreeBlockMemoryArray.

Referenced by SCIP_DECL_EVENTINITSOL().

◆ collectNondefaultParams()

static SCIP_RETCODE collectNondefaultParams ( SCIP scip,
SCIP_EVENTHDLRDATA eventhdlrdata 
)
static

collects all parameters that are set to non-default values and stores them in eventhdlrdata

Parameters
scipSCIP data structure
eventhdlrdatadata of event handler

Definition at line 1306 of file event_solvingphase.c.

References NULL, SCIP_CALL, SCIP_DECL_EVENTINIT(), SCIP_OKAY, SCIPallocBlockMemoryArray, SCIPgetNParams(), SCIPgetParams(), SCIPparamIsDefault(), and SCIPreallocBlockMemoryArray.

Referenced by SCIP_DECL_EVENTEXITSOL(), and SCIP_DECL_EVENTINIT().

◆ SCIP_DECL_EVENTINIT()

static SCIP_DECL_EVENTINIT ( eventInitSolvingphase  )
static

◆ SCIP_DECL_EVENTEXIT()

static SCIP_DECL_EVENTEXIT ( eventExitSolvingphase  )
static

deinitialization method of event handler (called before problem is freed)

Definition at line 1398 of file event_solvingphase.c.

References EVENTHDLR_NAME, NULL, SCIP_DECL_EVENTEXEC(), SCIP_OKAY, SCIPeventhdlrGetData(), SCIPeventhdlrGetName(), and SCIPfreeBlockMemoryArrayNull.

Referenced by SCIP_DECL_EVENTINIT().

◆ SCIP_DECL_EVENTEXEC()

static SCIP_DECL_EVENTEXEC ( eventExecSolvingphase  )
static

◆ SCIP_DECL_DISPOUTPUT() [1/2]

static SCIP_DECL_DISPOUTPUT ( dispOutputNRank1Nodes  )
static

output method of display column to output file stream 'file'

Definition at line 1464 of file event_solvingphase.c.

References DISP_NAME_NRANK1NODES, DISP_WIDT_NRANK1NODES, getNRank1Nodes(), NULL, SCIP_OKAY, SCIPdispGetName(), SCIPdispInt(), and SCIPgetMessagehdlr().

◆ SCIP_DECL_DISPOUTPUT() [2/2]

static SCIP_DECL_DISPOUTPUT ( dispOutputNnodesbelowinc  )
static

◆ SCIPincludeEventHdlrSolvingphase()