Scippy

SCIP

Solving Constraint Integer Programs

branch_strongcoloring.c File Reference

Detailed Description

branching rule performing strong branching for the vertex coloring problem

Author
Gerald Gamrath

This file implements an additional branching rule for the coloring algorithm.

We are looking for two nodes v and w, which are not adjacent in the current graph, and consider the following two constraints: SAME(v,w) and DIFFER(v,w). More information about the meaning of these constraints can be found in the documentation of the branching rule in branch_coloring.c.

This branching rule puts some more effort into the choice of the two nodes and performs a strongbranching. This means that for every possible choice of two nodes, it solves the LPs of the created children and computes a score with respect to the increase of the lower bound in both nodes. After that, it takes the combination of nodes yielding the best score. The interesting point is that the strongbranching is not performed for each variable, as it is done in some default branching rules of SCIP and supported by the LP-solver, but is done for a constraint, since we are branching on constraints. Look at executeStrongBranching() to see how it is done. There are also some improvements, since testing all possible combination of nodes is very expensive. The first possibility to avoid this is to stop the computation of scores once a possible branching is found that has only one feasible child. This results in more restrictions in this child without increasing the number of unprocessed nodes.

The second improvement is to compute a priority for all possible combinations, w.r.t. the fractional values of the variables. Then, only the first best k combinations are investigated by strongbranching.

This code is not optimized and in most cases inferior to the standard branching rule. It is only a demonstration of how to perform strongbranching on constraints!

Definition in file branch_strongcoloring.c.

#include <assert.h>
#include <string.h>
#include "branch_strongcoloring.h"
#include "pricer_coloring.h"

Go to the source code of this file.

Macros

#define BRANCHRULE_NAME   "strongcoloring"
 
#define BRANCHRULE_DESC   "branching rule template"
 
#define BRANCHRULE_PRIORITY   15000
 
#define BRANCHRULE_MAXDEPTH   -1
 
#define BRANCHRULE_MAXBOUNDDIST   1.0
 
#define DEFAULT_BRANCHINGMODE   2
 
#define DEFAULT_FIXINGSSCOREMODE   3
 
#define DEFAULT_MAXPRICINGROUNDS   -1
 
#define DEFAULT_USETCLIQUE   TRUE
 
#define DEFAULT_LOOKAHEAD   10
 

Functions

static double computeScore (SCIP_Real val1, SCIP_Real val2)
 
static SCIP_Real computeFixingsScore (SCIP_Real samevalue, SCIP_Real differvalue, SCIP_BRANCHRULEDATA *branchruledata)
 
static int nodes2index (SCIP *scip, int node1, int node2)
 
static void index2nodes (SCIP *scip, int ind, int *node1, int *node2)
 
static SCIP_RETCODE computeBranchingPriorities (SCIP *scip, SCIP_BRANCHRULEDATA *branchruledata)
 
static SCIP_RETCODE executeStrongBranching (SCIP *scip, COLOR_CONSTYPE constype, int node1, int node2, SCIP_BRANCHRULEDATA *branchruledata, SCIP_Real *newlb)
 
static SCIP_DECL_SORTINDCOMP (consdataCompValues)
 
static SCIP_DECL_BRANCHCOPY (branchCopyStrongcoloring)
 
static SCIP_DECL_BRANCHEXECLP (branchExeclpStrongcoloring)
 
static SCIP_DECL_BRANCHFREE (branchFreeStrongcoloring)
 
static SCIP_DECL_BRANCHINIT (branchInitStrongcoloring)
 
static SCIP_DECL_BRANCHEXIT (branchExitStrongcoloring)
 
SCIP_RETCODE SCIPincludeBranchruleStrongcoloring (SCIP *scip)
 

Macro Definition Documentation

◆ BRANCHRULE_NAME

#define BRANCHRULE_NAME   "strongcoloring"

◆ BRANCHRULE_DESC

#define BRANCHRULE_DESC   "branching rule template"

Definition at line 54 of file branch_strongcoloring.c.

Referenced by SCIPincludeBranchruleStrongcoloring().

◆ BRANCHRULE_PRIORITY

#define BRANCHRULE_PRIORITY   15000

Definition at line 55 of file branch_strongcoloring.c.

Referenced by SCIPincludeBranchruleStrongcoloring().

◆ BRANCHRULE_MAXDEPTH

#define BRANCHRULE_MAXDEPTH   -1

Definition at line 56 of file branch_strongcoloring.c.

Referenced by SCIPincludeBranchruleStrongcoloring().

◆ BRANCHRULE_MAXBOUNDDIST

#define BRANCHRULE_MAXBOUNDDIST   1.0

Definition at line 57 of file branch_strongcoloring.c.

Referenced by SCIPincludeBranchruleStrongcoloring().

◆ DEFAULT_BRANCHINGMODE

#define DEFAULT_BRANCHINGMODE   2

Definition at line 60 of file branch_strongcoloring.c.

Referenced by SCIPincludeBranchruleStrongcoloring().

◆ DEFAULT_FIXINGSSCOREMODE

#define DEFAULT_FIXINGSSCOREMODE   3

Definition at line 61 of file branch_strongcoloring.c.

Referenced by SCIPincludeBranchruleStrongcoloring().

◆ DEFAULT_MAXPRICINGROUNDS

#define DEFAULT_MAXPRICINGROUNDS   -1

Definition at line 62 of file branch_strongcoloring.c.

Referenced by SCIPincludeBranchruleStrongcoloring().

◆ DEFAULT_USETCLIQUE

#define DEFAULT_USETCLIQUE   TRUE

Definition at line 63 of file branch_strongcoloring.c.

Referenced by SCIPincludeBranchruleStrongcoloring().

◆ DEFAULT_LOOKAHEAD

#define DEFAULT_LOOKAHEAD   10

Definition at line 64 of file branch_strongcoloring.c.

Referenced by SCIPincludeBranchruleStrongcoloring().

Function Documentation

◆ computeScore()

static double computeScore ( SCIP_Real  val1,
SCIP_Real  val2 
)
static

computes a score for the two improvements that are achieved in the two sons for a branching decision

Parameters
val1the first value
val2the second value

Definition at line 99 of file branch_strongcoloring.c.

References MAX.

Referenced by SCIP_DECL_BRANCHEXECLP().

◆ computeFixingsScore()

static SCIP_Real computeFixingsScore ( SCIP_Real  samevalue,
SCIP_Real  differvalue,
SCIP_BRANCHRULEDATA branchruledata 
)
static

computes a score for the fractional values of the variables that would be fixed to zero for a same- or differ-branching

Parameters
samevaluevalue of the fractional variables fixed to 0 for a same-branching
differvaluevalue of the fractional variables fixed to 0 for a differ-branching
branchruledatabranching rule data

Definition at line 109 of file branch_strongcoloring.c.

Referenced by SCIP_DECL_BRANCHEXECLP().

◆ nodes2index()

static int nodes2index ( SCIP scip,
int  node1,
int  node2 
)
static

for given nodes node1, node2, compute the corresponding index in the arrays branchruledata->same-/differvalue

Parameters
scipSCIP data structure
node1the first node
node2the second node

Definition at line 138 of file branch_strongcoloring.c.

References COLORprobGetNNodes(), nnodes, and NULL.

Referenced by computeBranchingPriorities().

◆ index2nodes()

static void index2nodes ( SCIP scip,
int  ind,
int *  node1,
int *  node2 
)
static

for given index of the arrays branchruledata->same-/differvalue, compute the two nodes, the index represents

Parameters
scipSCIP data structure
indthe given index in the arrays
node1return value: the first node
node2return value: the second node

Definition at line 169 of file branch_strongcoloring.c.

References COLORprobGetNNodes(), nnodes, and NULL.

Referenced by computeBranchingPriorities(), and SCIP_DECL_BRANCHEXECLP().

◆ computeBranchingPriorities()

static SCIP_RETCODE computeBranchingPriorities ( SCIP scip,
SCIP_BRANCHRULEDATA branchruledata 
)
static

computes for each pair of nodes (i,j) two values, one for same (i,j), the other for differ(i,j) which are the sum of the values of variables with fractional parts, that would be fixed for this decision asd

Parameters
scipSCIP data structure
branchruledatathe data of the branching rule

Definition at line 197 of file branch_strongcoloring.c.

References COLORconsGetCurrentGraph(), COLORconsGetRepresentative(), COLORprobGetNNodes(), COLORprobGetStableSet(), COLORprobIsNodeInStableSet(), index2nodes(), nnodes, nodes2index(), NULL, SCIP_CALL, SCIP_OKAY, SCIP_Real, SCIPgetLPBranchCands(), SCIPisFeasPositive(), and SCIPvarGetData().

Referenced by SCIP_DECL_BRANCHEXECLP().

◆ executeStrongBranching()

static SCIP_RETCODE executeStrongBranching ( SCIP scip,
COLOR_CONSTYPE  constype,
int  node1,
int  node2,
SCIP_BRANCHRULEDATA branchruledata,
SCIP_Real newlb 
)
static

computes the lower bound that would a child node with the given branching decision would have

Parameters
scipSCIP data structure
constypethe type of the contraint: SAME or DIFFER
node1the first node for the branching constraint
node2the second node for the branching constraint
branchruledatathe data of the branching rule
newlbpointer to store the resulting value

Definition at line 307 of file branch_strongcoloring.c.

References COLORconsGetActiveStoreGraphCons(), COLORcreateConsStoreGraph(), FALSE, NULL, SCIP_Bool, SCIP_CALL, SCIP_OKAY, SCIPaddConsNode(), SCIPdelCons(), SCIPendProbing(), SCIPgetCurrentNode(), SCIPgetLPObjval(), SCIPnewProbingNode(), SCIPpropagateProbing(), SCIPreleaseCons(), SCIPsolveProbingLPWithPricing(), and SCIPstartProbing().

Referenced by SCIP_DECL_BRANCHEXECLP().

◆ SCIP_DECL_SORTINDCOMP()

static SCIP_DECL_SORTINDCOMP ( consdataCompValues  )
static

index comparison method two values in a real array

Definition at line 355 of file branch_strongcoloring.c.

References NULL, and SCIP_Real.

◆ SCIP_DECL_BRANCHCOPY()

static SCIP_DECL_BRANCHCOPY ( branchCopyStrongcoloring  )
static

copy method for branchrule plugins (called when SCIP copies plugins)

Definition at line 381 of file branch_strongcoloring.c.

References BRANCHRULE_NAME, NULL, SCIP_OKAY, and SCIPbranchruleGetName().

◆ SCIP_DECL_BRANCHEXECLP()

◆ SCIP_DECL_BRANCHFREE()

static SCIP_DECL_BRANCHFREE ( branchFreeStrongcoloring  )
static

destructor of branching rule to free user data (called when SCIP is exiting)

Definition at line 675 of file branch_strongcoloring.c.

References NULL, SCIP_OKAY, SCIPbranchruleGetData(), SCIPbranchruleSetData(), and SCIPfreeBlockMemory.

◆ SCIP_DECL_BRANCHINIT()

static SCIP_DECL_BRANCHINIT ( branchInitStrongcoloring  )
static

initialization method of branching rule (called after problem was transformed)

Definition at line 689 of file branch_strongcoloring.c.

References COLORprobGetNNodes(), NULL, SCIP_CALL, SCIP_OKAY, SCIPallocBlockMemoryArray, and SCIPbranchruleGetData().

◆ SCIP_DECL_BRANCHEXIT()

static SCIP_DECL_BRANCHEXIT ( branchExitStrongcoloring  )
static

deinitialization method of branching rule (called before transformed problem is freed)

Definition at line 709 of file branch_strongcoloring.c.

References NULL, SCIP_OKAY, SCIPbranchruleGetData(), and SCIPfreeBlockMemoryArray.

◆ SCIPincludeBranchruleStrongcoloring()