cons_indicator.c

Go to the documentation of this file.

/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
/*                                                                           */
/*                  This file is part of the program and library             */
/*         SCIP --- Solving Constraint Integer Programs                      */
/*                                                                           */
/*  Copyright (c) 2002-2026 Zuse Institute Berlin (ZIB)                      */
/*                                                                           */
/*  Licensed under the Apache License, Version 2.0 (the "License");          */
/*  you may not use this file except in compliance with the License.         */
/*  You may obtain a copy of the License at                                  */
/*                                                                           */
/*      http://www.apache.org/licenses/LICENSE-2.0                           */
/*                                                                           */
/*  Unless required by applicable law or agreed to in writing, software      */
/*  distributed under the License is distributed on an "AS IS" BASIS,        */
/*  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. */
/*  See the License for the specific language governing permissions and      */
/*  limitations under the License.                                           */
/*                                                                           */
/*  You should have received a copy of the Apache-2.0 license                */
/*  along with SCIP; see the file LICENSE. If not visit scipopt.org.         */
/*                                                                           */
/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
/**@file   cons_indicator.c
 * @ingroup DEFPLUGINS_CONS
 * @brief  constraint handler for indicator constraints
 * @author Marc Pfetsch
 *
 * An indicator constraint is given by a binary variable \f$y\f$ and an inequality \f$ax \leq
 * b\f$. It states that if \f$y = 1\f$ then \f$ax \leq b\f$ holds.
 *
 * This constraint is handled by adding a slack variable \f$s:\; ax - s \leq b\f$ with \f$s \geq
 * 0\f$. The constraint is enforced by fixing \f$s\f$ to 0 if \f$y = 1\f$.
 *
 * @note The constraint only implements an implication not an equivalence, i.e., it does not ensure
 * that \f$y = 1\f$ if \f$ax \leq b\f$ or equivalently if \f$s = 0\f$ holds.
 *
 * This constraint is equivalent to a linear constraint \f$ax - s \leq b\f$ and an SOS1 constraint on
 * \f$y\f$ and \f$s\f$ (at most one should be nonzero). In the indicator context we can, however,
 * separate more inequalities.
 *
 * The name indicator apparently comes from CPLEX.
 *
 *
 * @section SEPARATION Separation Methods
 *
 * We now explain the handling of indicator constraints in more detail.  The indicator constraint
 * handler adds an inequality for each indicator constraint. We assume that this system (with added
 * slack variables) is \f$ Ax - s \leq b \f$, where \f$ x \f$ are the original variables and \f$ s
 * \f$ are the slack variables added by the indicator constraint. Variables \f$ y \f$ are the binary
 * variables corresponding to the indicator constraints.
 *
 * @note In the implementation, we assume that bounds on the original variables \f$x\f$ cannot be
 * influenced by the indicator constraint. If it should be possible to relax these constraints as
 * well, then these constraints have to be added as indicator constraints.
 *
 * We separate inequalities by using the so-called alternative polyhedron.
 *
 *
 * @section ALTERNATIVEPOLYHEDRON Separation via the Alternative Polyhedron
 *
 * We now describe the separation method of the first method in more detail.
 *
 * Consider the LP-relaxation of the current subproblem:
 * \f[
 * \begin{array}{ll}
 *  min & c^T x + d^T z\\
 *      & A x - s \leq b, \\
 *      & D x + C z \leq f, \\
 *      & l \leq x \leq u, \\
 *      & u \leq z \leq v, \\
 *      & 0 \leq s.
 * \end{array}
 * \f]
 * As above \f$Ax - s \leq b\f$ contains all inequalities corresponding to indicator constraints,
 * while the system \f$Dx + Cy \leq f\f$ contains all other inequalities (which are ignored in the
 * following). Similarly, variables \f$z\f$ not appearing in indicator constraints are
 * ignored. Bounds for the variables \f$x_j\f$ can be given, in particular, variables can be
 * fixed. Note that \f$s \leq 0\f$ renders the system infeasible.
 *
 * To generate cuts, we construct the so-called @a alternative @a polyhedron:
 * \f[
 * \begin{array}{ll}
 *      P = \{ (w,r,t) : & A^T w - r + t = 0,\\
 *                       & b^T w - l^T r + u^T t = -1,\\
 *                       & w, r, t \geq 0 \}.
 * \end{array}
 * \f]
 * Here, \f$r\f$ and \f$t\f$ correspond to the lower and upper bounds on \f$x\f$, respectively.
 *
 * It turns out that the vertices of \f$P\f$ correspond to minimal infeasible subsystems of \f$A x
 * \leq b\f$, \f$l \leq x \leq u\f$. If \f$I\f$ is the index set of such a system, it follows that not all \f$s_i\f$ for
 * \f$i \in I\f$ can be 0, i.e., \f$y_i\f$ can be 1. In other words, the following cut is valid:
 * \f[
 *      \sum_{i \in I} y_i \leq |I| - 1.
 * \f]
 *
 *
 * @subsection DETAIL Separation heuristic
 *
 * We separate the above inequalities by a heuristic described in
 *
 *   Branch-And-Cut for the Maximum Feasible Subsystem Problem,@n
 *   Marc Pfetsch, SIAM Journal on Optimization 19, No.1, 21-38 (2008)
 *
 * The first step in the separation heuristic is to apply the transformation \f$\bar{y} = 1 - y\f$, which
 * transforms the above inequality into the constraint
 * \f[
 *      \sum_{i \in I} \bar{y}_i \geq 1,
 * \f]
 * that is, it is a set covering constraint on the negated variables.
 *
 * The basic idea is to use the current solution to the LP relaxation and use it as the objective,
 * when optimizing of the alternative polyhedron. Since any vertex corresponds to such an
 * inequality, we can check whether it is violated. To enlarge the chance that we find a @em
 * violated inequality, we perform a fixing procedure, in which the variable corresponding to an
 * arbitrary element of the last IIS \f$I\f$ is fixed to zero, i.e., cannot be used in the next
 * IISs. This is repeated until the corresponding alternative polyhedron is infeasible, i.e., we
 * have obtained an IIS-cover. For more details see the paper above.
 *
 *
 * @subsection PREPROC Preprocessing
 *
 * Since each indicator constraint adds a linear constraint to the formulation, preprocessing of the
 * linear constraints change the above approach as follows.
 *
 * The system as present in the formulation is the following (ignoring variables that are not
 * contained in indicator constraints and the objective function):
 * \f[
 *    \begin{array}{ll}
 *      & A x - s \leq b, \\
 *      & l \leq x \leq u, \\
 *      & s \leq 0.
 *    \end{array}
 * \f]
 * Note again that the requirement \f$s \leq 0\f$ leads to an infeasible system. Consider now the
 * preprocessing of the linear constraint (aggregation, bound strengthening, etc.) and assume that
 * this changes the above system to the following:
 * \f[
 *    \begin{array}{ll}
 *      & \tilde{A} x - \tilde{B} s \leq \tilde{b}, \\
 *      & \tilde{l} \leq x \leq \tilde{u}, \\
 *      & s \leq 0. \\
 *    \end{array}
 * \f]
 * Note that we forbid multi-aggregation of the \f$s\f$ variables in order to be able to change their
 * bounds in propagation/branching. The corresponding alternative system is the following:
 * \f[
 *    \begin{array}{ll}
 *      & \tilde{A}^T w - r + t = 0,\\
 *      & - \tilde{B}^T w + v = 0,\\
 *      & b^T w - l^T r + u^T t = -1,\\
 *      & w, v, r, t \geq 0
 *    \end{array}
 *    \qquad \Leftrightarrow \qquad
 *    \begin{array}{ll}
 *      & \tilde{A}^T w - r + t = 0,\\
 *      & \tilde{B}^T w \geq 0,\\
 *      & b^T w - l^T r + u^T t = -1,\\
 *      & w, r, t \geq 0,
 *    \end{array}
 * \f]
 * where the second form arises by substituting \f$v \geq 0\f$. A closer look at this system reveals
 * that it is not larger than the original one:
 *
 * - (Multi-)Aggregation of variables \f$x\f$ will remove these variables from the formulation, such that
 *   the corresponding column of \f$\tilde{A}\f$ (row of \f$\tilde{A}^T\f$) will be zero.
 *
 * - The rows of \f$\tilde{B}^T\f$ are not unit vectors, i.e., do not correspond to redundant
 *   nonnegativity constraints, only if the corresponding slack variables appear in an aggregation.
 *
 * Taken together, these two observations yield the conclusion that the new system is roughly as
 * large as the original one.
 *
 * @note Because of possible (multi-)aggregation it might happen that the linear constraint
 * corresponding to an indicator constraint becomes redundant and is deleted. From this we cannot
 * conclude that the indicator constraint is redundant as well (i.e. always fulfilled), because the
 * corresponding slack variable is still present and its setting to 0 might influence other
 * (linear) constraints. Thus, we have to rely on the dual presolving of the linear constraints to
 * detect this case: If the linear constraint is really redundant, i.e., is always fulfilled, it is
 * deleted and the slack variable can be fixed to 0. In this case, the indicator constraint can be
 * deleted as well.
 *
 * @todo Accept arbitrary ranged linear constraints as input (in particular: equations). Internally
 * create two indicator constraints or correct alternative polyhedron accordingly (need to split the
 * variables there, but not in original problem).
 *
 * @todo Treat variable upper bounds in a special way: Do not create the artificial slack variable,
 * but directly enforce the propagations etc.
 *
 * @todo Turn off separation if the alternative polyhedron is infeasible and updateBounds is false.
 *
 * @todo Improve parsing of indicator constraint in CIP-format. Currently, we have to rely on a particular name, i.e.,
 * the slack variable has to start with "indslack" and end with the name of the corresponding linear constraint.
 *
 * @todo Check whether one can further use the fact that the slack variable is aggregated.
 */
 
/*---+----1----+----2----+----3----+----4----+----5----+----6----+----7----+----8----+----9----+----0----+----1----+----2*/
 
#include "blockmemshell/memory.h"
#include "lpi/lpi.h"
#include "lpi/type_lpi.h"
#include "scip/expr_var.h"
#include "scip/expr_product.h"
#include "scip/cons_nonlinear.h"
#include "scip/cons_indicator.h"
#include "scip/cons_linear.h"
#include "scip/cons_logicor.h"
#include "scip/cons_varbound.h"
#include "scip/heur_indicator.h"
#include "scip/heur_trysol.h"
#include "scip/pub_conflict.h"
#include "scip/pub_cons.h"
#include "scip/pub_event.h"
#include "scip/pub_lp.h"
#include "scip/pub_message.h"
#include "scip/pub_misc.h"
#include "scip/pub_paramset.h"
#include "scip/pub_var.h"
#include "scip/scip_branch.h"
#include "scip/scip_conflict.h"
#include "scip/scip_cons.h"
#include "scip/scip_copy.h"
#include "scip/scip_cut.h"
#include "scip/scip_event.h"
#include "scip/scip_general.h"
#include "scip/scip_heur.h"
#include "scip/scip_lp.h"
#include "scip/scip_mem.h"
#include "scip/scip_message.h"
#include "scip/scip_nlp.h"
#include "scip/scip_numerics.h"
#include "scip/scip_param.h"
#include "scip/scip_prob.h"
#include "scip/scip_probing.h"
#include "scip/scip_sol.h"
#include "scip/scip_solve.h"
#include "scip/scip_solvingstats.h"
#include "scip/scip_tree.h"
#include "scip/scip_var.h"
#include "scip/symmetry_graph.h"
#include "symmetry/struct_symmetry.h"
 
 
/* #define SCIP_OUTPUT */
/* #define SCIP_ENABLE_IISCHECK */
 
/* constraint handler properties */
#define CONSHDLR_NAME          "indicator"
#define CONSHDLR_DESC          "indicator constraint handler"
#define CONSHDLR_SEPAPRIORITY        10 /**< priority of the constraint handler for separation */
#define CONSHDLR_ENFOPRIORITY      -100 /**< priority of the constraint handler for constraint enforcing */
#define CONSHDLR_CHECKPRIORITY -6000000 /**< priority of the constraint handler for checking feasibility */
#define CONSHDLR_SEPAFREQ            10 /**< frequency for separating cuts; zero means to separate only in the root node */
#define CONSHDLR_PROPFREQ             1 /**< frequency for propagating domains; zero means only preprocessing propagation */
#define CONSHDLR_EAGERFREQ          100 /**< frequency for using all instead of only the useful constraints in separation,
                                         *   propagation and enforcement, -1 for no eager evaluations, 0 for first only */
#define CONSHDLR_MAXPREROUNDS        -1 /**< maximal number of presolving rounds the constraint handler participates in (-1: no limit) */
#define CONSHDLR_DELAYSEPA        FALSE /**< Should separation method be delayed, if other separators found cuts? */
#define CONSHDLR_DELAYPROP        FALSE /**< Should propagation method be delayed, if other propagators found reductions? */
#define CONSHDLR_NEEDSCONS         TRUE /**< Should the constraint handler be skipped, if no constraints are available? */
 
#define CONSHDLR_PRESOLTIMING      SCIP_PRESOLTIMING_FAST
#define CONSHDLR_PROP_TIMING       SCIP_PROPTIMING_BEFORELP
 
 
/* event handler properties */
#define EVENTHDLR_BOUND_NAME       "indicatorbound"
#define EVENTHDLR_BOUND_DESC       "bound change event handler for indicator constraints"
 
#define EVENTHDLR_LINCONSBOUND_NAME "indicatorlinconsbound"
#define EVENTHDLR_LINCONSBOUND_DESC "bound change event handler for lincons of indicator constraints"
 
#define EVENTHDLR_RESTART_NAME     "indicatorrestart"
#define EVENTHDLR_RESTART_DESC     "force restart if absolute gap is 1 or enough binary variables have been fixed"
 
 
/* conflict handler properties */
#define CONFLICTHDLR_NAME          "indicatorconflict"
#define CONFLICTHDLR_DESC          "replace slack variables and generate logicor constraints"
#define CONFLICTHDLR_PRIORITY      200000
 
/* upgrade properties */
#define LINCONSUPGD_PRIORITY      +100000    /**< priority of the constraint handler for upgrading of linear constraints */
 
/* default values for parameters */
#define DEFAULT_BRANCHINDICATORS    FALSE    /**< Branch on indicator constraints in enforcing? */
#define DEFAULT_GENLOGICOR          FALSE    /**< Generate logicor constraints instead of cuts? */
#define DEFAULT_ADDCOUPLING          TRUE    /**< Add coupling constraints or rows if big-M is small enough? */
#define DEFAULT_MAXCOUPLINGVALUE      1e4    /**< maximum coefficient for binary variable in coupling constraint */
#define DEFAULT_ADDCOUPLINGCONS     FALSE    /**< Add initial variable upper bound constraints, if 'addcoupling' is true? */
#define DEFAULT_SEPACOUPLINGCUTS     TRUE    /**< Should the coupling inequalities be separated dynamically? */
#define DEFAULT_SEPACOUPLINGLOCAL   FALSE    /**< Allow to use local bounds in order to separate coupling inequalities? */
#define DEFAULT_SEPACOUPLINGVALUE     1e4    /**< maximum coefficient for binary variable in separated coupling constraint */
#define DEFAULT_SEPAALTERNATIVELP   FALSE    /**< Separate using the alternative LP? */
#define DEFAULT_SEPAPERSPECTIVE     FALSE    /**< Separate cuts based on perspective formulation? */
#define DEFAULT_SEPAPERSPLOCAL       TRUE    /**< Allow to use local bounds in order to separate perspectice cuts? */
#define DEFAULT_MAXSEPANONVIOLATED      3    /**< maximal number of separated non violated IISs, before separation is stopped */
#define DEFAULT_TRYSOLFROMCOVER     FALSE    /**< Try to construct a feasible solution from a cover? */
#define DEFAULT_UPGRADELINEAR       FALSE    /**< Try to upgrade linear constraints to indicator constraints? */
#define DEFAULT_USEOTHERCONSS       FALSE    /**< Collect other constraints to alternative LP? */
#define DEFAULT_USEOBJECTIVECUT     FALSE    /**< Use objective cut with current best solution to alternative LP? */
#define DEFAULT_UPDATEBOUNDS        FALSE    /**< Update bounds of original variables for separation? */
#define DEFAULT_MAXCONDITIONALTLP     0.0    /**< max. estimated condition of the solution basis matrix of the alt. LP to be trustworthy (0.0 to disable check) */
#define DEFAULT_MAXSEPACUTS           100    /**< maximal number of cuts separated per separation round */
#define DEFAULT_MAXSEPACUTSROOT      2000    /**< maximal number of cuts separated per separation round in the root node */
#define DEFAULT_REMOVEINDICATORS    FALSE    /**< Remove indicator constraint if corresponding variable bound constraint has been added? */
#define DEFAULT_GENERATEBILINEAR    FALSE    /**< Do not generate indicator constraint, but a bilinear constraint instead? */
#define DEFAULT_SCALESLACKVAR       FALSE    /**< Scale slack variable coefficient at construction time? */
#define DEFAULT_NOLINCONSCONT       FALSE    /**< Decompose problem (do not generate linear constraint if all variables are continuous)? */
#define DEFAULT_TRYSOLUTIONS         TRUE    /**< Try to make solutions feasible by setting indicator variables? */
#define DEFAULT_ENFORCECUTS         FALSE    /**< In enforcing try to generate cuts (only if sepaalternativelp is true)? */
#define DEFAULT_DUALREDUCTIONS       TRUE    /**< Should dual reduction steps be performed? */
#define DEFAULT_ADDOPPOSITE         FALSE    /**< Add opposite inequality in nodes in which the binary variable has been fixed to 0? */
#define DEFAULT_CONFLICTSUPGRADE    FALSE    /**< Try to upgrade bounddisjunction conflicts by replacing slack variables? */
#define DEFAULT_FORCERESTART        FALSE    /**< Force restart if absolute gap is 1 or enough binary variables have been fixed? */
#define DEFAULT_RESTARTFRAC           0.9    /**< fraction of binary variables that need to be fixed before restart occurs (in forcerestart) */
#define DEFAULT_USESAMESLACKVAR     FALSE    /**< Use same slack variable for indicator constraints with common binary variable? */
 
 
/* other values */
#define OBJEPSILON                  0.001    /**< value to add to objective in alt. LP if the binary variable is 1 to get small IISs */
#define SEPAALTTHRESHOLD               10    /**< only separate IIS cuts if the number of separated coupling cuts is less than this value */
#define MAXROUNDINGROUNDS               1    /**< maximal number of rounds that produced cuts in separation */
 
 
/** constraint data for indicator constraints */
struct SCIP_ConsData
{
   SCIP_VAR*             binvar;             /**< binary variable for indicator constraint */
   SCIP_VAR*             slackvar;           /**< slack variable of inequality of indicator constraint */
   SCIP_CONS*            lincons;            /**< linear constraint corresponding to indicator constraint */
   SCIP_VAR**            varswithevents;     /**< linear constraint variables with bound change events */
   SCIP_EVENTTYPE*       eventtypes;         /**< eventtypes of linear constraint variables with bound change events */
   int                   nevents;            /**< number of bound change events of linear constraint variables */
   SCIP_Bool             activeone;          /**< whether the constraint is active on 1 or 0 (only used at creation time) */
   SCIP_Bool             lessthanineq;       /**< whether the original linear constraint is less-than-rhs or greater-than-rhs (only used at creation time) */
   int                   nfixednonzero;      /**< number of variables among binvar and slackvar fixed to be nonzero */
   int                   colindex;           /**< column index in alternative LP */
   unsigned int          linconsactive:1;    /**< whether linear constraint and slack variable are active */
   unsigned int          implicationadded:1; /**< whether corresponding implication has been added */
   unsigned int          slacktypechecked:1; /**< whether it has been checked to convert the slack variable to be implicit integer */
};
 
 
/** indicator constraint handler data */
struct SCIP_ConshdlrData
{
   SCIP_EVENTHDLR*       eventhdlrbound;     /**< event handler for bound change events */
   SCIP_EVENTHDLR*       eventhdlrlinconsbound; /**< event handler for bound change events on linear constraint */
   SCIP_EVENTHDLR*       eventhdlrrestart;   /**< event handler for performing restarts */
   SCIP_Bool             boundhaschanged;    /**< whether a bound of a binvar/slackvar of some indicator constraint has changed */
   SCIP_Bool             linconsevents;      /**< whether bound change events are added to variables of linear constraints */
   SCIP_Bool             linconsboundschanged; /**< whether bounds of variables of linear constraints changed */
   SCIP_Bool             removable;          /**< whether the separated cuts should be removable */
   SCIP_Bool             scaled;             /**< if first row of alt. LP has been scaled */
   SCIP_Bool             objindicatoronly;   /**< whether the objective is nonzero only for indicator variables */
   SCIP_Bool             objothervarsonly;   /**< whether the objective is nonzero only for non-indicator variables */
   SCIP_Real             minabsobj;          /**< minimum absolute nonzero objective of indicator variables */
   SCIP_LPI*             altlp;              /**< alternative LP for cut separation */
   int                   nrows;              /**< # rows in the alt. LP corr. to original variables in linear constraints and slacks */
   int                   nlbbounds;          /**< # lower bounds of original variables */
   int                   nubbounds;          /**< # upper bounds of original variables */
   SCIP_HASHMAP*         varhash;            /**< hash map from variable to row index in alternative LP */
   SCIP_HASHMAP*         lbhash;             /**< hash map from variable to index of lower bound column in alternative LP */
   SCIP_HASHMAP*         ubhash;             /**< hash map from variable to index of upper bound column in alternative LP */
   SCIP_HASHMAP*         slackhash;          /**< hash map from slack variable to row index in alternative LP */
   SCIP_HASHMAP*         binvarhash;         /**< hash map from binary indicator variable to indicator constraint */
   SCIP_HASHMAP*         binslackvarhash;    /**< hash map from binary indicator variable to slack variables */
   int                   nslackvars;         /**< # slack variables */
   int                   niiscutsgen;        /**< number of IIS-cuts generated */
   int                   nperspcutsgen;      /**< number of cuts based on perspective formulation generated */
   int                   objcutindex;        /**< index of objective cut in alternative LP (-1 if not added) */
   SCIP_Real             objupperbound;      /**< best upper bound on objective known */
   SCIP_Real             objaltlpbound;      /**< upper objective bound stored in alternative LP (infinity if not added) */
   int                   maxroundingrounds;  /**< maximal number of rounds that produced cuts in separation */
   SCIP_Real             roundingminthres;   /**< minimal value for rounding in separation */
   SCIP_Real             roundingmaxthres;   /**< maximal value for rounding in separation */
   SCIP_Real             roundingoffset;     /**< offset for rounding in separation */
   SCIP_Bool             branchindicators;   /**< Branch on indicator constraints in enforcing? */
   SCIP_Bool             genlogicor;         /**< Generate logicor constraints instead of cuts? */
   SCIP_Bool             addcoupling;        /**< whether the coupling inequalities should be added at the beginning */
   SCIP_Bool             addcouplingcons;    /**< Add initial variable upper bound constraints, if 'addcoupling' is true? */
   SCIP_Bool             sepacouplingcuts;   /**< Should the coupling inequalities be separated dynamically? */
   SCIP_Bool             sepacouplinglocal;  /**< Allow to use local bounds in order to separate coupling inequalities? */
   SCIP_Bool             sepaperspective;    /**< Separate cuts based on perspective formulation? */
   SCIP_Bool             sepapersplocal;     /**< Allow to use local bounds in order to separate perspectice cuts? */
   SCIP_Bool             removeindicators;   /**< Remove indicator constraint if corresponding variable bound constraint has been added? */
   SCIP_Bool             updatebounds;       /**< whether the bounds of the original variables should be changed for separation */
   SCIP_Bool             trysolutions;       /**< Try to make solutions feasible by setting indicator variables? */
   SCIP_Bool             enforcecuts;        /**< in enforcing try to generate cuts (only if sepaalternativelp is true) */
   SCIP_Bool             dualreductions;     /**< Should dual reduction steps be performed? */
   SCIP_Bool             addopposite;        /**< Add opposite inequality in nodes in which the binary variable has been fixed to 0? */
   SCIP_Bool             generatebilinear;   /**< Do not generate indicator constraint, but a bilinear constraint instead? */
   SCIP_Bool             scaleslackvar;      /**< Scale slack variable coefficient at construction time? */
   SCIP_Bool             conflictsupgrade;   /**< Try to upgrade bounddisjunction conflicts by replacing slack variables? */
   SCIP_Bool             performedrestart;   /**< whether a restart has been performed already */
   int                   maxsepacuts;        /**< maximal number of cuts separated per separation round */
   int                   maxsepacutsroot;    /**< maximal number of cuts separated per separation round in root node */
   int                   maxsepanonviolated; /**< maximal number of separated non violated IISs, before separation is stopped */
   int                   nbinvarszero;       /**< binary variables globally fixed to zero */
   int                   ninitconss;         /**< initial number of indicator constraints (needed in event handlers) */
   SCIP_Real             maxcouplingvalue;   /**< maximum coefficient for binary variable in initial coupling constraint */
   SCIP_Real             sepacouplingvalue;  /**< maximum coefficient for binary variable in separated coupling constraint */
   SCIP_Real             maxconditionaltlp;  /**< maximum estimated condition number of the alternative LP to trust its solution */
   SCIP_Real             restartfrac;        /**< fraction of binary variables that need to be fixed before restart occurs (in forcerestart) */
   SCIP_HEUR*            heurtrysol;         /**< trysol heuristic */
   SCIP_Bool             addedcouplingcons;  /**< whether the coupling constraints have been added already */
   SCIP_CONS**           addlincons;         /**< additional linear constraints that should be added to the alternative LP */
   int                   naddlincons;        /**< number of additional constraints */
   int                   maxaddlincons;      /**< maximal number of additional constraints */
   SCIP_Bool             useotherconss;      /**< Collect other constraints to alternative LP? */
   SCIP_Bool             useobjectivecut;    /**< Use objective cut with current best solution to alternative LP? */
   SCIP_Bool             trysolfromcover;    /**< Try to construct a feasible solution from a cover? */
   SCIP_Bool             upgradelinear;      /**< Try to upgrade linear constraints to indicator constraints? */
   char                  normtype;           /**< norm type for cut computation */
   SCIP_Bool             usesameslackvar;    /**< Use same slack variable for indicator constraints with common binary variable? */
   /* parameters that should not be changed after problem stage: */
   SCIP_Bool             sepaalternativelp;  /**< Separate using the alternative LP? */
   SCIP_Bool             sepaalternativelp_; /**< used to store the sepaalternativelp parameter */
   SCIP_Bool             nolinconscont;      /**< decompose problem - do not generate linear constraint if all variables are continuous */
   SCIP_Bool             nolinconscont_;     /**< used to store the nolinconscont parameter */
   SCIP_Bool             forcerestart;       /**< Force restart if absolute gap is 1 or enough binary variables have been fixed? */
   SCIP_Bool             forcerestart_;      /**< used to store the forcerestart parameter */
};
 
 
/** indicator conflict handler data */
struct SCIP_ConflicthdlrData
{
   SCIP_CONSHDLR*        conshdlr;           /**< indicator constraint handler */
   SCIP_CONSHDLRDATA*    conshdlrdata;       /**< indicator constraint handler data */
};
 
 
/** type of enforcing/separation call */
enum SCIP_enfosepatype
{
   SCIP_TYPE_ENFOLP      = 0,                /**< enforce LP */
   SCIP_TYPE_ENFOPS      = 1,                /**< enforce pseudo solution */
   SCIP_TYPE_ENFORELAX   = 2,                /**< enforce relaxation solution */
   SCIP_TYPE_SEPALP      = 3,                /**< separate LP */
   SCIP_TYPE_SEPARELAX   = 4,                /**< separate relaxation solution */
   SCIP_TYPE_SEPASOL     = 5                 /**< separate relaxation solution */
};
typedef enum SCIP_enfosepatype SCIP_ENFOSEPATYPE;
 
 
/* macro for parameters */
#define SCIP_CALL_PARAM(x) /*lint -e527 */ do                                                   \
{                                                                                               \
   SCIP_RETCODE _restat_;                                                                       \
   if ( (_restat_ = (x)) != SCIP_OKAY && (_restat_ != SCIP_PARAMETERUNKNOWN) )                  \
   {                                                                                            \
      SCIPerrorMessage("[%s:%d] Error <%d> in function call\n", __FILE__, __LINE__, _restat_);  \
      SCIPABORT();                                                                              \
      return _restat_;                                                                          \
   }                                                                                            \
}                                                                                               \
while ( FALSE )
 
 
/** adds symmetry information of constraint to a symmetry detection graph */
static
SCIP_RETCODE addSymmetryInformation(
   SCIP*                 scip,               /**< SCIP pointer */
   SYM_SYMTYPE           symtype,            /**< type of symmetries that need to be added */
   SCIP_CONS*            cons,               /**< constraint */
   SYM_GRAPH*            graph,              /**< symmetry detection graph */
   SCIP_Bool*            success             /**< pointer to store whether symmetry information could be added */
   )
{
   SCIP_CONSDATA* consdata;
   SCIP_CONS* lincons;
   SCIP_VAR** vars;
   SCIP_Real* vals;
   SCIP_Real constant;
   SCIP_Real lhs;
   SCIP_Real rhs;
   int slacknodeidx;
   int consnodeidx;
   int eqnodeidx;
   int opnodeidx;
   int nodeidx;
   int nvarslincons;
   int nlocvars;
 
   assert(scip != NULL);
   assert(cons != NULL);
   assert(graph != NULL);
   assert(success != NULL);
 
   consdata = SCIPconsGetData(cons);
   assert(consdata != NULL);
 
   lincons = consdata->lincons;
   assert(lincons != NULL);
 
   /* get information about linear constraint */
   lhs = SCIPgetLhsLinear(scip, lincons);
   rhs = SCIPgetRhsLinear(scip, lincons);
   nvarslincons = SCIPgetNVarsLinear(scip, lincons);
 
   nlocvars = MAX3(1, nvarslincons, SCIPgetNVars(scip));  /*lint !e666*/
   SCIP_CALL( SCIPallocBufferArray(scip, &vars, nlocvars) );
   SCIP_CALL( SCIPallocBufferArray(scip, &vals, nlocvars) );
   BMScopyMemoryArray(vars, SCIPgetVarsLinear(scip, lincons), nvarslincons);
   BMScopyMemoryArray(vals, SCIPgetValsLinear(scip, lincons), nvarslincons);
 
   constant = 0.0;
   nlocvars = nvarslincons;
   SCIP_CALL( SCIPgetSymActiveVariables(scip, symtype, &vars, &vals, &nlocvars, &constant, SCIPisTransformed(scip)) );
 
   /* update lhs/rhs due to possible variable aggregation */
   lhs -= constant;
   rhs -= constant;
 
   /* create nodes and edges */
   SCIP_CALL( SCIPaddSymgraphConsnode(scip, graph, cons, lhs, rhs, &consnodeidx) );
   SCIP_CALL( SCIPaddSymgraphOpnode(scip, graph, (int) SYM_CONSOPTYPE_SUM, &opnodeidx) ); /*lint !e641*/
   SCIP_CALL( SCIPaddSymgraphEdge(scip, graph, consnodeidx, opnodeidx, FALSE, 0.0) );
 
   /* add nodes/edes for variables in linear constraint */
   SCIP_CALL( SCIPaddSymgraphVarAggregation(scip, graph, opnodeidx, vars, vals, nlocvars, 0.0) );
 
   /* create nodes and edges for activation of constraint */
   SCIP_CALL( SCIPaddSymgraphOpnode(scip, graph, (int) SYM_CONSOPTYPE_EQ, &eqnodeidx) ); /*lint !e641*/
   SCIP_CALL( SCIPaddSymgraphEdge(scip, graph, consnodeidx, eqnodeidx, FALSE, 0.0) );
 
   /* create nodes and edges for (possibly aggregated) activation variable */
   vars[0] = consdata->binvar;
   vals[0] = 1.0;
   constant = 0.0;
   nlocvars = 1;
 
   SCIP_CALL( SCIPgetSymActiveVariables(scip, symtype, &vars, &vals, &nlocvars, &constant, SCIPisTransformed(scip)) );
 
   if( nlocvars > 1 || !SCIPisEQ(scip, vals[0], 1.0) || !SCIPisZero(scip, constant) )
   {
      /* encode aggregation by a sum-expression and connect it to indicator node */
      SCIP_CALL( SCIPaddSymgraphOpnode(scip, graph, (int) SYM_CONSOPTYPE_SUM, &opnodeidx) ); /*lint !e641*/
      SCIP_CALL( SCIPaddSymgraphEdge(scip, graph, eqnodeidx, opnodeidx, TRUE, 1.0) );
 
      /* add nodes and edges for variables in aggregation */
      SCIP_CALL( SCIPaddSymgraphVarAggregation(scip, graph, opnodeidx, vars, vals, nlocvars, constant) );
   }
   else if( nlocvars == 1 )
   {
      if( symtype == SYM_SYMTYPE_SIGNPERM )
      {
         nodeidx = SCIPgetSymgraphVarnodeidx(scip, graph, vars[0]);
         SCIP_CALL( SCIPaddSymgraphEdge(scip, graph, eqnodeidx, nodeidx, TRUE, 1.0) );
 
         nodeidx = SCIPgetSymgraphNegatedVarnodeidx(scip, graph, vars[0]);
         SCIP_CALL( SCIPaddSymgraphEdge(scip, graph, eqnodeidx, nodeidx, TRUE, -1.0) );
      }
      else
      {
         nodeidx = SCIPgetSymgraphVarnodeidx(scip, graph, vars[0]);
         SCIP_CALL( SCIPaddSymgraphEdge(scip, graph, eqnodeidx, nodeidx, TRUE, 1.0) );
      }
   }
 
   SCIP_CALL( SCIPaddSymgraphOpnode(scip, graph, (int) SYM_CONSOPTYPE_SLACK, &slacknodeidx) ); /*lint !e641*/
   SCIP_CALL( SCIPaddSymgraphEdge(scip, graph, consnodeidx, slacknodeidx, FALSE, 0.0) );
 
   /* create nodes and edges for (possibly aggregated) slack variable */
   vars[0] = consdata->slackvar;
   vals[0] = 1.0;
   constant = 0.0;
   nlocvars = 1;
 
   SCIP_CALL( SCIPgetSymActiveVariables(scip, symtype, &vars, &vals, &nlocvars, &constant, SCIPisTransformed(scip)) );
 
   if( nlocvars > 1 || !SCIPisEQ(scip, vals[0], 1.0) || !SCIPisZero(scip, constant) )
   {
      /* encode aggregation by a sum-expression and connect it to root node */
      SCIP_CALL( SCIPaddSymgraphOpnode(scip, graph, (int) SYM_CONSOPTYPE_SUM, &opnodeidx) ); /*lint !e641*/
      SCIP_CALL( SCIPaddSymgraphEdge(scip, graph, slacknodeidx, opnodeidx, FALSE, 0.0) );
 
      /* add nodes and edges for variables in aggregation */
      SCIP_CALL( SCIPaddSymgraphVarAggregation(scip, graph, opnodeidx, vars, vals, nlocvars, constant) );
   }
   else if( nlocvars == 1 )
   {
      nodeidx = SCIPgetSymgraphVarnodeidx(scip, graph, vars[0]);
      SCIP_CALL( SCIPaddSymgraphEdge(scip, graph, slacknodeidx, nodeidx, FALSE, 0.0) );
   }
 
   SCIPfreeBufferArray(scip, &vals);
   SCIPfreeBufferArray(scip, &vars);
 
   *success = TRUE;
 
   return SCIP_OKAY;
}
 
 
/* ---------------- Callback methods of event handlers ---------------- */
 
/** execute the event handler for getting variable bound changes
 *
 *  We update the number of variables fixed to be nonzero.
 */
static
SCIP_DECL_EVENTEXEC(eventExecIndicatorBound)
{
   SCIP_CONSHDLRDATA* conshdlrdata;
   SCIP_EVENTTYPE eventtype;
   SCIP_CONSDATA* consdata;
   SCIP_CONSHDLR* conshdlr;
   SCIP_CONS* cons;
   SCIP_Real oldbound;
   SCIP_Real newbound;
 
   assert( eventhdlr != NULL );
   assert( eventdata != NULL );
   assert( event != NULL );
 
   SCIP_STRINGEQ( SCIPeventhdlrGetName(eventhdlr), EVENTHDLR_BOUND_NAME, SCIP_INVALIDCALL );
 
   cons = (SCIP_CONS*)eventdata;
   assert( cons != NULL );
   consdata = SCIPconsGetData(cons);
   assert( consdata != NULL );
   assert( 0 <= consdata->nfixednonzero && consdata->nfixednonzero <= 2 );
   assert( consdata->linconsactive );
 
   conshdlr = SCIPconsGetHdlr(cons);
   assert( conshdlr != NULL );
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
 
   oldbound = SCIPeventGetOldbound(event);
   newbound = SCIPeventGetNewbound(event);
 
   eventtype = SCIPeventGetType(event);
   switch ( eventtype )
   {
   case SCIP_EVENTTYPE_LBTIGHTENED:
      /* if variable is now fixed to be positive */
      if ( ! SCIPisFeasPositive(scip, oldbound) && SCIPisFeasPositive(scip, newbound) )
      {
         ++(consdata->nfixednonzero);
#ifdef SCIP_MORE_DEBUG
         SCIPdebugMsg(scip, "Changed lower bound of variable <%s> from %g to %g (nfixednonzero: %d).\n",
            SCIPvarGetName(SCIPeventGetVar(event)), oldbound, newbound, consdata->nfixednonzero);
#endif
      }
      break;
 
   case SCIP_EVENTTYPE_UBTIGHTENED:
      /* if variable is now fixed to be negative */
      if ( ! SCIPisFeasNegative(scip, oldbound) && SCIPisFeasNegative(scip, newbound) )
      {
         ++(consdata->nfixednonzero);
#ifdef SCIP_MORE_DEBUG
         SCIPdebugMsg(scip, "Changed upper bound of variable <%s> from %g to %g (nfixednonzero: %d).\n",
            SCIPvarGetName(SCIPeventGetVar(event)), oldbound, newbound, consdata->nfixednonzero);
#endif
      }
      break;
 
   case SCIP_EVENTTYPE_LBRELAXED:
      /* if variable is not fixed to be positive anymore */
      if ( SCIPisFeasPositive(scip, oldbound) && ! SCIPisFeasPositive(scip, newbound) )
      {
         --(consdata->nfixednonzero);
#ifdef SCIP_MORE_DEBUG
         SCIPdebugMsg(scip, "Changed lower bound of variable <%s> from %g to %g (nfixednonzero: %d).\n",
            SCIPvarGetName(SCIPeventGetVar(event)), oldbound, newbound, consdata->nfixednonzero);
#endif
      }
      break;
 
   case SCIP_EVENTTYPE_UBRELAXED:
      /* if variable is not fixed to be negative anymore */
      if ( SCIPisFeasNegative(scip, oldbound) && ! SCIPisFeasNegative(scip, newbound) )
      {
         --(consdata->nfixednonzero);
#ifdef SCIP_MORE_DEBUG
         SCIPdebugMsg(scip, "Changed upper bound of variable <%s> from %g to %g (nfixednonzero: %d).\n",
            SCIPvarGetName(SCIPeventGetVar(event)), oldbound, newbound, consdata->nfixednonzero);
#endif
      }
      break;
 
   default:
      SCIPerrorMessage("Invalid event type.\n");
      SCIPABORT();
      return SCIP_INVALIDDATA; /*lint !e527*/
   }
   assert( 0 <= consdata->nfixednonzero && consdata->nfixednonzero <= 2 );
 
   /* mark that some variable has changed */
   conshdlrdata->boundhaschanged = TRUE;
 
   return SCIP_OKAY;
}
 
/** execute the event handler for getting variable bound changes on variables of linear constraint
 *
 * used for propagation of max activity of lincons to upper bound of slackvar; only important bounds for this purpose are catched
 */
static
SCIP_DECL_EVENTEXEC(eventExecIndicatorLinconsBound)
{
   SCIP_CONSHDLRDATA* conshdlrdata;
 
   assert( eventhdlr != NULL );
   assert( eventdata != NULL );
   assert( event != NULL );
   assert( SCIPeventGetType(event) == SCIP_EVENTTYPE_UBTIGHTENED || SCIPeventGetType(event) == SCIP_EVENTTYPE_LBTIGHTENED );
 
   SCIP_STRINGEQ( SCIPeventhdlrGetName(eventhdlr), EVENTHDLR_LINCONSBOUND_NAME, SCIP_INVALIDCALL );
 
#ifdef SCIP_MORE_DEBUG
   SCIPdebugMsg(scip, "Changed upper bound of variable <%s> from %g to %g.\n",
            SCIPvarGetName(SCIPeventGetVar(event)), SCIPeventGetOldbound(event), SCIPeventGetNewbound(event));
#endif
 
   /* mark that some variable has changed */
   conshdlrdata = (SCIP_CONSHDLRDATA*)eventdata;
   assert( conshdlrdata != NULL );
   conshdlrdata->linconsboundschanged = TRUE;
 
   return SCIP_OKAY;
}
 
/** exec the event handler for forcing a restart
 *
 *  There are two cases in which we perform a (user) restart:
 *  - If we have a max FS instance, i.e., the objective is 1 for indicator variables and 0 otherwise,
 *    we can force a restart if the gap is 1. In this case, the remaining work consists of proving
 *    infeasibility of the non-fixed indicators.
 *  - If a large fraction of the binary indicator variables have been globally fixed, it makes sense
 *    to force a restart.
 */
static
SCIP_DECL_EVENTEXEC(eventExecIndicatorRestart)
{
   SCIP_CONSHDLRDATA* conshdlrdata;
   SCIP_EVENTTYPE eventtype;
 
   assert( scip != NULL );
   assert( eventhdlr != NULL );
   assert( eventdata != NULL );
   assert( event != NULL );
 
   SCIP_STRINGEQ( SCIPeventhdlrGetName(eventhdlr), EVENTHDLR_RESTART_NAME, SCIP_INVALIDCALL );
 
   conshdlrdata = (SCIP_CONSHDLRDATA*)eventdata;
   assert( conshdlrdata != NULL );
   assert( conshdlrdata->forcerestart );
 
   eventtype = SCIPeventGetType(event);
   switch ( eventtype )
   {
   case SCIP_EVENTTYPE_GUBCHANGED:
   case SCIP_EVENTTYPE_GLBCHANGED:
   {
#ifndef NDEBUG
      SCIP_Real oldbound;
      SCIP_Real newbound;
 
      assert( SCIPvarIsBinary(SCIPeventGetVar(event)) );
      assert( !SCIPvarIsImpliedIntegral(SCIPeventGetVar(event)) );
      oldbound = SCIPeventGetOldbound(event);
      newbound = SCIPeventGetNewbound(event);
      assert( SCIPisIntegral(scip, oldbound) );
      assert( SCIPisIntegral(scip, newbound) );
      assert( ! SCIPisEQ(scip, oldbound, newbound) );
      assert( SCIPisZero(scip, oldbound) || SCIPisEQ(scip, oldbound, 1.0) );
      assert( SCIPisZero(scip, newbound) || SCIPisEQ(scip, newbound, 1.0) );
#endif
 
      /* do not treat this case if we have performed a restart already */
      if ( conshdlrdata->performedrestart )
         return SCIP_OKAY;
 
      /* variable is now fixed */
      ++(conshdlrdata->nbinvarszero);
      SCIPdebugMsg(scip, "Fixed variable <%s> (nbinvarszero: %d, total: %d).\n",
         SCIPvarGetName(SCIPeventGetVar(event)), conshdlrdata->nbinvarszero, conshdlrdata->ninitconss);
 
      if ( SCIPgetStage(scip) != SCIP_STAGE_SOLVING )
         break;
 
      /* if enough variables have been fixed */
      if ( conshdlrdata->nbinvarszero > (int) ((SCIP_Real) conshdlrdata->ninitconss * conshdlrdata->restartfrac) )
      {
         SCIPverbMessage(scip, SCIP_VERBLEVEL_NORMAL, NULL,
            "Forcing restart, since %d binary variables among %d have been fixed.\n", conshdlrdata->nbinvarszero, conshdlrdata->ninitconss);
         SCIP_CALL( SCIPrestartSolve(scip) );
 
         /* drop event */
         if ( conshdlrdata->objindicatoronly )
         {
            SCIP_CALL( SCIPdropEvent(scip, SCIP_EVENTTYPE_BESTSOLFOUND, eventhdlr, (SCIP_EVENTDATA*) conshdlrdata, -1) );
         }
         conshdlrdata->performedrestart = TRUE;
      }
      break;
   }
 
   case SCIP_EVENTTYPE_BESTSOLFOUND:
      assert( SCIPisIntegral(scip, conshdlrdata->minabsobj) );
      assert( SCIPisGE(scip, conshdlrdata->minabsobj, 1.0 ) );
 
      if ( SCIPgetStage(scip) != SCIP_STAGE_SOLVING )
         break;
 
      if ( ! conshdlrdata->objindicatoronly )
         break;
 
      /* if the absolute gap is equal to minabsobj */
      if ( SCIPisEQ(scip, REALABS(SCIPgetPrimalbound(scip) - SCIPgetDualbound(scip)), conshdlrdata->minabsobj) )
      {
         SCIPverbMessage(scip, SCIP_VERBLEVEL_NORMAL, NULL, "Forcing restart, since the absolute gap is %f.\n", conshdlrdata->minabsobj);
         SCIP_CALL( SCIPrestartSolve(scip) );
 
         /* use inference branching, since the objective is not meaningful */
         if ( SCIPfindBranchrule(scip, "inference") != NULL && !SCIPisParamFixed(scip, "branching/inference/priority") )
         {
            SCIP_CALL( SCIPsetIntParam(scip, "branching/inference/priority", INT_MAX/4) );
         }
 
         /* drop event */
         SCIP_CALL( SCIPdropEvent(scip, SCIP_EVENTTYPE_BESTSOLFOUND, eventhdlr, (SCIP_EVENTDATA*) conshdlrdata, -1) );
         conshdlrdata->performedrestart = TRUE;
      }
      break;
 
   default:
      SCIPerrorMessage("invalid event type.\n");
      SCIPABORT();
      return SCIP_INVALIDDATA; /*lint !e527*/
   }
 
   return SCIP_OKAY;
}
 
 
/* ------------------------ conflict handler ---------------------------------*/
 
/** destructor of conflict handler to free conflict handler data (called when SCIP is exiting) */
static
SCIP_DECL_CONFLICTFREE(conflictFreeIndicator)
{
   SCIP_CONFLICTHDLRDATA* conflicthdlrdata;
 
   assert( scip != NULL );
   assert( conflicthdlr != NULL );
 
   SCIP_STRINGEQ( SCIPconflicthdlrGetName(conflicthdlr), CONFLICTHDLR_NAME, SCIP_INVALIDCALL );
 
   conflicthdlrdata = SCIPconflicthdlrGetData(conflicthdlr);
   SCIPfreeBlockMemory(scip, &conflicthdlrdata);
 
   return SCIP_OKAY;
}
 
 
/** conflict processing method of conflict handler (called when conflict was found)
 *
 *  In this conflict handler we try to replace slack variables by binary indicator variables and
 *  generate a logicor constraint if possible.
 *
 *  @todo Extend to integral case.
 */
static
SCIP_DECL_CONFLICTEXEC(conflictExecIndicator)
{  /*lint --e{715}*/
   SCIP_CONFLICTHDLRDATA* conflicthdlrdata;
   SCIP_Bool haveslack;
   SCIP_VAR* var;
   int i;
 
   assert( conflicthdlr != NULL );
   assert( bdchginfos != NULL || nbdchginfos == 0 );
   assert( result != NULL );
 
   SCIP_STRINGEQ( SCIPconflicthdlrGetName(conflicthdlr), CONFLICTHDLR_NAME, SCIP_INVALIDCALL );
 
   /* don't process already resolved conflicts */
   if ( resolved )
   {
      *result = SCIP_DIDNOTRUN;
      return SCIP_OKAY;
   }
 
   SCIPdebugMsg(scip, "Indicator conflict handler.\n");
 
   conflicthdlrdata = SCIPconflicthdlrGetData(conflicthdlr);
   assert( conflicthdlrdata != NULL );
 
   /* possibly skip conflict handler */
   if ( ! ((SCIP_CONFLICTHDLRDATA*) conflicthdlrdata)->conshdlrdata->conflictsupgrade )
      return SCIP_OKAY;
 
   *result = SCIP_DIDNOTFIND;
 
   /* check whether there seems to be one slack variable and all other variables are binary */
   haveslack = FALSE;
   for (i = 0; i < nbdchginfos; ++i)
   {
      assert( bdchginfos != NULL ); /* for flexelint */
      assert( bdchginfos[i] != NULL );
 
      var = SCIPbdchginfoGetVar(bdchginfos[i]);
 
      /* check string for slack variable */
      if ( strstr(SCIPvarGetName(var), "indslack") != NULL )
      {
         /* make sure that the slack variable occurs with its lower bound */
         if ( SCIPboundtypeOpposite(SCIPbdchginfoGetBoundtype(bdchginfos[i])) != SCIP_BOUNDTYPE_LOWER )
            break;
 
         /* make sure that the lower bound is 0 */
         if ( ! SCIPisFeasZero(scip, SCIPbdchginfoGetNewbound(bdchginfos[i])) )
            break;
 
         haveslack = TRUE;
         continue;
      }
 
      /* we only treat binary variables (other than slack variables) */
      if ( ! SCIPvarIsBinary(var) )
         break;
   }
 
   /* if we have found at least one slack variable and all other variables are binary */
   if ( haveslack && i == nbdchginfos )
   {
      SCIP_CONS** conss;
      SCIP_VAR** vars;
      int nconss;
      int j;
 
      SCIPdebugMsg(scip, "Found conflict involving slack variables that can be remodelled.\n");
 
      assert( conflicthdlrdata->conshdlr != NULL );
 
      SCIP_STRINGEQ( SCIPconshdlrGetName(conflicthdlrdata->conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
      nconss = SCIPconshdlrGetNConss(conflicthdlrdata->conshdlr);
      conss = SCIPconshdlrGetConss(conflicthdlrdata->conshdlr);
 
      /* create array of variables in conflict constraint */
      SCIP_CALL( SCIPallocBufferArray(scip, &vars, nbdchginfos) );
      for (i = 0; i < nbdchginfos; ++i)
      {
         assert( bdchginfos != NULL ); /* for flexelint */
         assert( bdchginfos[i] != NULL );
 
         var = SCIPbdchginfoGetVar(bdchginfos[i]);
 
         SCIPdebugMsg(scip, " <%s> %s %g\n", SCIPvarGetName(var), SCIPbdchginfoGetBoundtype(bdchginfos[i]) == SCIP_BOUNDTYPE_LOWER ? ">=" : "<=",
            SCIPbdchginfoGetNewbound(bdchginfos[i]));
 
         /* check string for slack variable */
         if ( strstr(SCIPvarGetName(var), "indslack") != NULL )
         {
            SCIP_VAR* slackvar;
 
            /* search for slack variable */
            for (j = 0; j < nconss; ++j)
            {
               assert( conss[j] != NULL );
               slackvar = SCIPgetSlackVarIndicator(conss[j]);
               assert( slackvar != NULL );
 
               /* check whether we found the variable */
               if ( slackvar == var )
               {
                  /* replace slack variable by binary variable */
                  var = SCIPgetBinaryVarIndicator(conss[j]);
                  break;
               }
            }
 
            /* check whether we found the slack variable */
            if ( j >= nconss )
            {
               SCIPdebugMsg(scip, "Could not find slack variable <%s>.\n", SCIPvarGetName(var));
               break;
            }
         }
         else
         {
            /* if the variable is fixed to one in the conflict set, we have to use its negation */
            if ( SCIPbdchginfoGetNewbound(bdchginfos[i]) > 0.5 )
            {
               SCIP_CALL( SCIPgetNegatedVar(scip, var, &var) );
            }
         }
 
         vars[i] = var;
      }
 
      /* whether all slack variables have been found */
      if ( i == nbdchginfos )
      {
         SCIP_CONS* cons;
         char consname[SCIP_MAXSTRLEN];
 
         SCIPdebugMsg(scip, "Generated logicor conflict constraint.\n");
 
         /* create a logicor constraint out of the conflict set */
         (void) SCIPsnprintf(consname, SCIP_MAXSTRLEN, "cf%d_%" SCIP_LONGINT_FORMAT, SCIPgetNRuns(scip), SCIPgetNConflictConssApplied(scip));
         SCIP_CALL( SCIPcreateConsLogicor(scip, &cons, consname, nbdchginfos, vars,
               FALSE, separate, FALSE, FALSE, TRUE, local, FALSE, dynamic, removable, FALSE) );
 
#ifdef SCIP_OUTPUT
         SCIP_CALL( SCIPprintCons(scip, cons, NULL) );
         SCIPinfoMessage(scip, NULL, ";\n");
#endif
 
         /* add constraint to SCIP */
         SCIP_CALL( SCIPaddConflict(scip, node, &cons, validnode, conftype, cutoffinvolved) );
 
         *result = SCIP_CONSADDED;
      }
 
      /* free temporary memory */
      SCIPfreeBufferArray(scip, &vars);
   }
 
   return SCIP_OKAY;
}
 
 
/* ------------------------ parameter handling ---------------------------------*/
 
/** check whether we transfer a changed parameter to the given value
 *
 *  @see paramChangedIndicator()
 */
static
SCIP_RETCODE checkTransferBoolParam(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_PARAM*           param,              /**< parameter */
   const char*           name,               /**< parameter name to check */
   SCIP_Bool             newvalue,           /**< new value */
   SCIP_Bool*            value               /**< old and possibly changed value of parameter */
   )
{
   const char* paramname;
 
   assert( scip != NULL );
   assert( param != NULL );
   assert( name != NULL );
   assert( value != NULL );
 
   if ( SCIPparamGetType(param) != SCIP_PARAMTYPE_BOOL )
      return SCIP_OKAY;
 
   if ( *value == newvalue )
      return SCIP_OKAY;
 
   paramname = SCIPparamGetName(param);
   assert( paramname != NULL );
 
   /* check whether the change parameter corresponds to our name to check */
   if ( strcmp(paramname, name) == 0 )
   {
      /* check stage and possibly ignore parameter change */
      if ( SCIPgetStage(scip) > SCIP_STAGE_PROBLEM )
      {
         SCIPwarningMessage(scip, "Cannot change parameter <%s> stage %d - reset to old value %s.\n", name, SCIPgetStage(scip), *value ? "true" : "false");
         /* Note that the following command will create a recursive call, but then *value == newvalue above. */
         SCIP_CALL( SCIPchgBoolParam(scip, param, *value) );
      }
      else
      {
         /* otherwise copy value */
         *value = newvalue;
      }
   }
 
   return SCIP_OKAY;
}
 
 
/** called after a parameter has been changed */
static
SCIP_DECL_PARAMCHGD(paramChangedIndicator)
{
   SCIP_CONSHDLR* conshdlr;
   SCIP_CONSHDLRDATA* conshdlrdata;
 
   assert( scip != NULL );
   assert( param != NULL );
 
   /* get indicator constraint handler */
   conshdlr = SCIPfindConshdlr(scip, "indicator");
   assert( conshdlr != NULL );
 
   /* get constraint handler data */
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
 
   SCIP_CALL( checkTransferBoolParam(scip, param, "constraints/indicator/sepaalternativelp", conshdlrdata->sepaalternativelp_, &conshdlrdata->sepaalternativelp) );
   SCIP_CALL( checkTransferBoolParam(scip, param, "constraints/indicator/forcerestart", conshdlrdata->forcerestart_, &conshdlrdata->forcerestart) );
   SCIP_CALL( checkTransferBoolParam(scip, param, "constraints/indicator/nolinconscont", conshdlrdata->nolinconscont_, &conshdlrdata->nolinconscont) );
 
   return SCIP_OKAY;
}
 
 
/* ------------------------ debugging routines ---------------------------------*/
 
#ifdef SCIP_ENABLE_IISCHECK
/** Check that indicator constraints corresponding to nonnegative entries in @a vector are infeasible in original problem
 *
 *  @note This function will probably fail if the has been presolved by the cons_linear presolver. To make it complete
 *  we would have to substitute active variables.
 */
static
SCIP_RETCODE checkIIS(
   SCIP*                 scip,               /**< SCIP pointer */
   int                   nconss,             /**< number of constraints */
   SCIP_CONS**           conss,              /**< indicator constraints */
   SCIP_Real*            vector              /**< vector */
   )
{
   SCIP_CONSHDLRDATA* conshdlrdata;
   SCIP_CONSHDLR* conshdlr;
   SCIP_HASHMAP* varhash;   /* hash map from variable to column index in auxiliary LP */
   SCIP_LPI* lp;
   int nvars = 0;
   int c;
 
   assert( scip != NULL );
   assert( vector != NULL );
 
   SCIPdebugMsg(scip, "Checking IIS ...\n");
 
   /* now check indicator constraints */
   conshdlr = SCIPfindConshdlr(scip, "indicator");
   assert( conshdlr != NULL );
 
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
 
   conss = SCIPconshdlrGetConss(conshdlr);
   nconss = SCIPconshdlrGetNConss(conshdlr);
 
   /* create LP */
   SCIP_CALL( SCIPlpiCreate(&lp, SCIPgetMessagehdlr(scip), "checkLP", SCIP_OBJSEN_MINIMIZE) );
 
   /* set up hash map */
   SCIP_CALL( SCIPhashmapCreate(&varhash, SCIPblkmem(scip), SCIPgetNVars(scip)) );
 
   /* loop through indicator constraints */
   for (c = 0; c < nconss; ++c)
   {
      SCIP_CONSDATA* consdata;
      consdata = SCIPconsGetData(conss[c]);
      assert( consdata != NULL );
 
      /* check whether constraint should be included */
      if ( consdata->colindex >= 0 && (! SCIPisFeasZero(scip, vector[consdata->colindex]) || ! SCIPconsIsEnabled(conss[c])) )
      {
         SCIP_CONS* lincons;
         SCIP_VAR** linvars;
         SCIP_Real* linvals;
         SCIP_Real linrhs;
         SCIP_Real linlhs;
         SCIP_VAR* slackvar;
         int nlinvars;
         SCIP_Real sign = 1.0;
         int matbeg;
         int* matind;
         SCIP_Real* matval;
         SCIP_VAR** newvars;
         int nnewvars;
         SCIP_Real lhs;
         SCIP_Real rhs;
         int cnt;
         int v;
 
         lincons = consdata->lincons;
         assert( lincons != NULL );
         assert( ! SCIPconsIsEnabled(conss[c]) || SCIPconsIsActive(lincons) );
         assert( ! SCIPconsIsEnabled(conss[c]) || SCIPconsIsEnabled(lincons) );
 
         slackvar = consdata->slackvar;
         assert( slackvar != NULL );
 
         /* if the slack variable is aggregated (multi-aggregation should not happen) */
         assert( SCIPvarGetStatus(slackvar) != SCIP_VARSTATUS_MULTAGGR );
         if ( SCIPvarGetStatus(slackvar) == SCIP_VARSTATUS_AGGREGATED )
         {
            SCIP_VAR* var;
            SCIP_Real scalar = 1.0;
            SCIP_Real constant = 0.0;
 
            var = slackvar;
 
            SCIP_CALL( SCIPgetProbvarSum(scip, &var, &scalar, &constant) );
            assert( ! SCIPisZero(scip, scalar) );
 
            /*  SCIPdebugMsg(scip, "slack variable aggregated (scalar: %f, constant: %f)\n", scalar, constant); */
 
            /* otherwise construct a linear constraint */
            SCIP_CALL( SCIPallocBufferArray(scip, &linvars, 1) );
            SCIP_CALL( SCIPallocBufferArray(scip, &linvals, 1) );
            linvars[0] = var;
            linvals[0] = scalar;
            nlinvars = 1;
            linlhs = -SCIPinfinity(scip);
            linrhs = constant;
         }
         else
         {
            /* in this case, the linear constraint is directly usable */
            linvars = SCIPgetVarsLinear(scip, lincons);
            linvals = SCIPgetValsLinear(scip, lincons);
            nlinvars = SCIPgetNVarsLinear(scip, lincons);
            linlhs = SCIPgetLhsLinear(scip, lincons);
            linrhs = SCIPgetRhsLinear(scip, lincons);
         }
 
         /* adapt rhs of linear constraint */
         assert( SCIPisInfinity(scip, -linlhs) || SCIPisInfinity(scip, linrhs) );
         if ( SCIPisInfinity(scip, linrhs) )
         {
            linrhs = -linlhs;
            assert( linrhs > -SCIPinfinity(scip) );
            sign = -1.0;
         }
 
         SCIP_CALL( SCIPallocBufferArray(scip, &matind, 4*nlinvars) );
         SCIP_CALL( SCIPallocBufferArray(scip, &matval, 4*nlinvars) );
         SCIP_CALL( SCIPallocBufferArray(scip, &newvars, nlinvars) );
 
         /* set up row */
         nnewvars = 0;
         for (v = 0; v < nlinvars; ++v)
         {
            SCIP_VAR* var;
            var = linvars[v];
            assert( var != NULL );
 
            /* skip slack variable */
            if ( var == slackvar )
               continue;
 
            /* if variable is new */
            if ( ! SCIPhashmapExists(varhash, var) )
            {
               /* add variable in map */
               SCIP_CALL( SCIPhashmapInsertInt(varhash, var, nvars) );
               assert( nvars == SCIPhashmapGetImageInt(varhash, var) );
               /* SCIPdebugMsg(scip, "Inserted variable <%s> into hashmap (%d).\n", SCIPvarGetName(var), nvars); */
               nvars++;
 
               /* store new variables */
               newvars[nnewvars++] = var;
            }
            assert( SCIPhashmapExists(varhash, var) );
         }
 
         /* add new columns */
         if ( nnewvars > 0 )
         {
            SCIP_Real* lb;
            SCIP_Real* ub;
            SCIP_Real* obj;
            char** colnames;
 
            SCIP_CALL( SCIPallocBufferArray(scip, &lb, nnewvars) );
            SCIP_CALL( SCIPallocBufferArray(scip, &ub, nnewvars) );
            SCIP_CALL( SCIPallocBufferArray(scip, &obj, nnewvars) );
            SCIP_CALL( SCIPallocBufferArray(scip, &colnames, nnewvars) );
 
            for (v = 0; v < nnewvars; ++v)
            {
               SCIP_VAR* var;
               var = newvars[v];
               obj[v] = 0.0;
               lb[v] = SCIPvarGetLbLocal(var);
               ub[v] = SCIPvarGetUbLocal(var);
               SCIP_CALL( SCIPallocBufferArray(scip, &(colnames[v]), SCIP_MAXSTRLEN) ); /*lint !e866*/
               (void) SCIPsnprintf(colnames[v], SCIP_MAXSTRLEN, "%s", SCIPvarGetName(var));
            }
 
            /* now add columns */
            SCIP_CALL( SCIPlpiAddCols(lp, nnewvars, obj, lb, ub, colnames, 0, NULL, NULL, NULL) );
 
            for (v = nnewvars - 1; v >= 0; --v)
            {
               SCIPfreeBufferArray(scip, &(colnames[v]));
            }
            SCIPfreeBufferArray(scip, &colnames);
            SCIPfreeBufferArray(scip, &obj);
            SCIPfreeBufferArray(scip, &ub);
            SCIPfreeBufferArray(scip, &lb);
         }
 
         /* set up row */
         cnt = 0;
         for (v = 0; v < nlinvars; ++v)
         {
            SCIP_VAR* var;
            var = linvars[v];
            assert( var != NULL );
 
            /* skip slack variable */
            if ( var == slackvar )
               continue;
 
            assert( SCIPhashmapExists(varhash, var) );
            matind[cnt] = SCIPhashmapGetImageInt(varhash, var);
            matval[cnt] = sign * linvals[v];
            ++cnt;
         }
 
         lhs = -SCIPlpiInfinity(lp);
         rhs = linrhs;
 
         /* add new row */
         matbeg = 0;
         SCIP_CALL( SCIPlpiAddRows(lp, 1, &lhs, &rhs, NULL, cnt, &matbeg, matind, matval) );
 
         SCIPfreeBufferArray(scip, &matind);
         SCIPfreeBufferArray(scip, &matval);
         SCIPfreeBufferArray(scip, &newvars);
 
         assert( slackvar != NULL );
         if ( SCIPvarGetStatus(slackvar) == SCIP_VARSTATUS_AGGREGATED )
         {
            SCIPfreeBufferArray(scip, &linvals);
            SCIPfreeBufferArray(scip, &linvars);
         }
      }
   }
 
   /* possibly handle additional linear constraints */
   if ( conshdlrdata->useotherconss )
   {
      /* get all linear constraints */
      conss = SCIPgetConss(scip);
      nconss = SCIPgetNConss(scip);
 
      /* loop through constraints */
      for (c = 0; c < nconss; ++c)
      {
         SCIP_CONS* cons;
         SCIP_VAR** linvars;
         SCIP_Real* linvals;
         SCIP_Real linrhs;
         SCIP_Real linlhs;
         SCIP_Real* matval;
         SCIP_VAR** newvars;
         int nnewvars = 0;
         int* matind;
         int nlinvars;
         int matbeg = 0;
         int cnt = 0;
         int v;
 
         cons = conss[c];
         assert( cons != NULL );
 
         /* avoid non-active, local constraints */
         if ( ! SCIPconsIsEnabled(cons) || ! SCIPconsIsActive(cons) || SCIPconsIsLocal(cons) )
            continue;
 
         /* check type of constraint (only take linear constraints) */
         if ( strcmp(SCIPconshdlrGetName(SCIPconsGetHdlr(cons)), "linear") != 0 )
            continue;
 
         /* avoid adding linear constraints that correspond to indicator constraints */
         if ( strncmp(SCIPconsGetName(cons), "indlin", 6) == 0 )
            continue;
 
         /* get data of linear constraint */
         linvars = SCIPgetVarsLinear(scip, cons);
         linvals = SCIPgetValsLinear(scip, cons);
         nlinvars = SCIPgetNVarsLinear(scip, cons);
         linlhs = SCIPgetLhsLinear(scip, cons);
         linrhs = SCIPgetRhsLinear(scip, cons);
 
         /* reserve space */
         SCIP_CALL( SCIPallocBufferArray(scip, &matind, 4*nlinvars) );
         SCIP_CALL( SCIPallocBufferArray(scip, &matval, 4*nlinvars) );
         SCIP_CALL( SCIPallocBufferArray(scip, &newvars, nlinvars) );
 
         /* collect possibly new variables */
         for (v = 0; v < nlinvars; ++v)
         {
            SCIP_VAR* var;
            var = linvars[v];
            assert( var != NULL );
 
            /* if variable is new */
            if ( ! SCIPhashmapExists(varhash, var) )
            {
               /* add variable in map */
               SCIP_CALL( SCIPhashmapInsertInt(varhash, var, nvars) );
               assert( nvars == SCIPhashmapGetImageInt(varhash, var) );
               /* SCIPdebugMsg(scip, "Inserted variable <%s> into hashmap (%d).\n", SCIPvarGetName(var), nvars); */
               nvars++;
 
               /* store new variables */
               newvars[nnewvars++] = var;
            }
            assert( SCIPhashmapExists(varhash, var) );
         }
 
         /* add new columns */
         if ( nnewvars > 0 )
         {
            SCIP_Real* lb;
            SCIP_Real* ub;
            SCIP_Real* obj;
            char** colnames;
 
            SCIP_CALL( SCIPallocBufferArray(scip, &lb, nnewvars) );
            SCIP_CALL( SCIPallocBufferArray(scip, &ub, nnewvars) );
            SCIP_CALL( SCIPallocBufferArray(scip, &obj, nnewvars) );
            SCIP_CALL( SCIPallocBufferArray(scip, &colnames, nnewvars) );
 
            for (v = 0; v < nnewvars; ++v)
            {
               SCIP_VAR* var;
               var = newvars[v];
               obj[v] = 0.0;
               lb[v] = SCIPvarGetLbLocal(var);
               ub[v] = SCIPvarGetUbLocal(var);
               SCIP_CALL( SCIPallocBufferArray(scip, &(colnames[v]), SCIP_MAXSTRLEN) ); /*lint !e866*/
               (void) SCIPsnprintf(colnames[v], SCIP_MAXSTRLEN, "%s", SCIPvarGetName(var));
            }
 
            /* now add columns */
            SCIP_CALL( SCIPlpiAddCols(lp, nnewvars, obj, lb, ub, colnames, 0, NULL, NULL, NULL) );
 
            for (v = nnewvars - 1; v >= 0; --v)
            {
               SCIPfreeBufferArray(scip, &(colnames[v]));
            }
            SCIPfreeBufferArray(scip, &colnames);
            SCIPfreeBufferArray(scip, &obj);
            SCIPfreeBufferArray(scip, &ub);
            SCIPfreeBufferArray(scip, &lb);
         }
 
         /* set up row */
         for (v = 0; v < nlinvars; ++v)
         {
            SCIP_VAR* var;
            var = linvars[v];
            assert( var != NULL );
 
            assert( SCIPhashmapExists(varhash, var) );
            matind[cnt] = SCIPhashmapGetImageInt(varhash, var);
            matval[cnt] = linvals[v];
            ++cnt;
         }
 
         /* add new row */
         SCIP_CALL( SCIPlpiAddRows(lp, 1, &linlhs, &linrhs, NULL, cnt, &matbeg, matind, matval) );
 
         SCIPfreeBufferArray(scip, &matind);
         SCIPfreeBufferArray(scip, &matval);
         SCIPfreeBufferArray(scip, &newvars);
      }
   }
 
   /* solve LP and check status */
   SCIP_CALL( SCIPlpiSolvePrimal(lp) );
 
   if ( ! SCIPlpiIsPrimalInfeasible(lp) )
   {
      SCIPerrorMessage("Detected IIS is not infeasible in original problem!\n");
 
      SCIP_CALL( SCIPlpiWriteLP(lp, "check.lp") );
      SCIP_CALL( SCIPlpiWriteLP(conshdlrdata->altlp, "altdebug.lp") );
      SCIPABORT();
      return SCIP_ERROR; /*lint !e527*/
   }
   SCIPdebugMsg(scip, "Check successful!\n");
 
   SCIPhashmapFree(&varhash);
   SCIP_CALL( SCIPlpiFree(&lp) );
 
   return SCIP_OKAY;
}
#endif
 
 
/* ------------------------ auxiliary operations -------------------------------*/
 
/** return objective contribution of variable
 *
 *  Special treatment of negated variables: return negative of objective of original
 *  variable. SCIPvarGetObj() would return 0 in these cases.
 */
static
SCIP_Real varGetObjDelta(
   SCIP_VAR*             var                 /**< variable */
   )
{
   if ( SCIPvarIsBinary(var) && SCIPvarIsNegated(var) )
   {
      assert( SCIPvarGetNegatedVar(var) != NULL );
      return -SCIPvarGetObj(SCIPvarGetNegatedVar(var));
   }
   else if ( SCIPvarGetStatus(var) == SCIP_VARSTATUS_AGGREGATED )
   {
      assert( SCIPvarGetAggrVar(var) != NULL );
      return SCIPvarGetAggrScalar(var) * SCIPvarGetObj(SCIPvarGetAggrVar(var));
   }
 
   return SCIPvarGetObj(var);
}
 
 
/** ensures that the addlincons array can store at least num entries */
static
SCIP_RETCODE consdataEnsureAddLinConsSize(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_CONSHDLR*        conshdlr,           /**< constraint handler */
   int                   num                 /**< minimum number of entries to store */
   )
{
   SCIP_CONSHDLRDATA* conshdlrdata;
 
   assert( scip != NULL );
   assert( conshdlr != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
   assert( conshdlrdata->naddlincons <= conshdlrdata->maxaddlincons );
 
   if ( num > conshdlrdata->maxaddlincons )
   {
      int newsize;
 
      newsize = SCIPcalcMemGrowSize(scip, num);
      SCIP_CALL( SCIPreallocBlockMemoryArray(scip, &conshdlrdata->addlincons, conshdlrdata->maxaddlincons, newsize) );
      conshdlrdata->maxaddlincons = newsize;
   }
   assert( num <= conshdlrdata->maxaddlincons );
 
   return SCIP_OKAY;
}
 
 
/* ------------------------ operations on the alternative LP -------------------*/
 
/** initialize alternative LP
 *
 *  The alternative system is organized as follows:
 *  - The first row corresponds to the right hand side of the original system.
 *  - The next nconss constraints correspond to the slack variables.
 *  - The rows after that correspond to the original variables.
 */
static
SCIP_RETCODE initAlternativeLP(
   SCIP*                 scip,               /**< SCIP pointer */
   SCIP_CONSHDLR*        conshdlr            /**< constraint handler */
   )
{
   SCIP_CONSHDLRDATA* conshdlrdata;
   SCIP_Real lhs = -1.0;
   SCIP_Real rhs = -1.0;
 
   assert( scip != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
   assert( conshdlrdata->altlp == NULL );
   assert( conshdlrdata->varhash == NULL );
   assert( conshdlrdata->lbhash == NULL );
   assert( conshdlrdata->ubhash == NULL );
   assert( conshdlrdata->slackhash != NULL );
 
   /* create hash map of variables */
   SCIP_CALL( SCIPhashmapCreate(&conshdlrdata->varhash, SCIPblkmem(scip), SCIPgetNVars(scip)) );
   SCIP_CALL( SCIPhashmapCreate(&conshdlrdata->lbhash, SCIPblkmem(scip), SCIPgetNVars(scip)) );
   SCIP_CALL( SCIPhashmapCreate(&conshdlrdata->ubhash, SCIPblkmem(scip), SCIPgetNVars(scip)) );
 
   /* create alternative LP */
   SCIP_CALL( SCIPlpiCreate(&conshdlrdata->altlp, SCIPgetMessagehdlr(scip), "altlp", SCIP_OBJSEN_MINIMIZE) );
 
   /* add first row */
   SCIP_CALL( SCIPlpiAddRows(conshdlrdata->altlp, 1, &lhs, &rhs, NULL, 0, NULL, NULL, NULL) );
   conshdlrdata->nrows = 1;
 
   /* set parameters */
   SCIP_CALL_PARAM( SCIPlpiSetIntpar(conshdlrdata->altlp, SCIP_LPPAR_FROMSCRATCH, FALSE) );
   SCIP_CALL_PARAM( SCIPlpiSetIntpar(conshdlrdata->altlp, SCIP_LPPAR_PRESOLVING, TRUE) );
   SCIP_CALL_PARAM( SCIPlpiSetIntpar(conshdlrdata->altlp, SCIP_LPPAR_SCALING, 1) );
   SCIP_CALL_PARAM( SCIPlpiSetIntpar(conshdlrdata->altlp, SCIP_LPPAR_FASTMIP, FALSE) );
 
   SCIPdebugMsg(scip, "Initialized alternative LP.\n");
 
   /* uncomment the following for debugging */
   /* SCIP_CALL_PARAM( SCIPlpiSetIntpar(conshdlrdata->altlp, SCIP_LPPAR_LPINFO, TRUE) ); */
 
   return SCIP_OKAY;
}
 
 
/** check whether the bounds in given (alternative) LP are set correctly (for debugging) */
#ifndef NDEBUG
static
SCIP_RETCODE checkLPBoundsClean(
   SCIP*                 scip,               /**< SCIP pointer */
   SCIP_LPI*             lp,                 /**< LP for which bounds should be checked */
   int                   nconss,             /**< number of constraints */
   SCIP_CONS**           conss               /**< constraints */
   )
{
   SCIP_Real* lb;
   SCIP_Real* ub;
   SCIP_Bool* covered;
   int nCols;
   int j;
 
   assert( scip != NULL );
   assert( lp != NULL );
 
   SCIP_CALL( SCIPlpiGetNCols(lp, &nCols) );
 
   SCIP_CALL( SCIPallocBufferArray(scip, &lb, nCols) );
   SCIP_CALL( SCIPallocBufferArray(scip, &ub, nCols) );
   SCIP_CALL( SCIPallocBufferArray(scip, &covered, nCols) );
 
   for (j = 0; j < nCols; ++j)
      covered[j] = FALSE;
 
   /* check columns used by constraints */
   SCIP_CALL( SCIPlpiGetBounds(lp, 0, nCols-1, lb, ub) );
   for (j = 0; j < nconss; ++j)
   {
      SCIP_CONSDATA* consdata;
      int ind;
 
      assert( conss[j] != NULL );
      consdata = SCIPconsGetData(conss[j]);
      assert( consdata != NULL );
      ind = consdata->colindex;
 
      if ( ind >= 0 )
      {
         assert( ind < nCols );
         covered[ind] = TRUE;
         if ( ! SCIPisFeasZero(scip, lb[ind]) || ! SCIPlpiIsInfinity(lp, ub[ind]) )
         {
            SCIPABORT();
         }
      }
   }
 
   /* check other columns */
   for (j = 0; j < nCols; ++j)
   {
      if (! covered[j] )
      {
         /* some columns can be fixed to 0, since they correspond to disabled constraints */
         if ( ( ! SCIPlpiIsInfinity(lp, -lb[j]) && ! SCIPisFeasZero(scip, lb[j])) || (! SCIPlpiIsInfinity(lp, ub[j]) && ! SCIPisFeasZero(scip, ub[j])) )
         {
            SCIPABORT();
         }
      }
   }
 
   SCIPfreeBufferArray(scip, &covered);
   SCIPfreeBufferArray(scip, &lb);
   SCIPfreeBufferArray(scip, &ub);
 
   return SCIP_OKAY;
}
#endif
 
 
/** set the alternative system objective function
 *
 *  We assume that the objective function coefficients of the variables other than the binary
 *  indicators are always 0 and hence do not have to be changed.
 *
 *  We already use the tranformation \f$y' = 1 - y\f$.
 */
static
SCIP_RETCODE setAltLPObj(
   SCIP*                 scip,               /**< SCIP pointer */
   SCIP_LPI*             lp,                 /**< alternative LP */
   SCIP_SOL*             sol,                /**< solution to be dealt with */
   int                   nconss,             /**< number of constraints */
   SCIP_CONS**           conss               /**< indicator constraints */
   )
{
   int j;
   SCIP_Real* obj = NULL;
   int* indices = NULL;
   int cnt = 0;
 
   assert( scip != NULL );
   assert( lp != NULL );
   assert( conss != NULL );
 
   SCIP_CALL( SCIPallocBufferArray(scip, &obj, nconss) );
   SCIP_CALL( SCIPallocBufferArray(scip, &indices, nconss) );
 
   for (j = 0; j < nconss; ++j)
   {
      SCIP_CONSDATA* consdata;
 
      assert( conss[j] != NULL );
      consdata = SCIPconsGetData(conss[j]);
      assert( consdata != NULL );
 
      if ( consdata->colindex >= 0 )
      {
         SCIP_Real val = SCIPgetSolVal(scip, sol, consdata->binvar);
         if ( SCIPisFeasEQ(scip, val, 1.0) )
            obj[cnt] = OBJEPSILON;      /* set objective to some small number to get small IISs */
         else
            obj[cnt] = 1.0 - val;
         indices[cnt++] = consdata->colindex;
      }
   }
 
   if ( cnt > 0 )
   {
      SCIP_CALL( SCIPlpiChgObj(lp, cnt, indices, obj) );
   }
 
   SCIPfreeBufferArray(scip, &indices);
   SCIPfreeBufferArray(scip, &obj);
 
   return SCIP_OKAY;
}
 
 
/** set the alternative system objective function to some small value */
static
SCIP_RETCODE setAltLPObjZero(
   SCIP*                 scip,               /**< SCIP pointer */
   SCIP_LPI*             lp,                 /**< alternative LP */
   int                   nconss,             /**< number of constraints */
   SCIP_CONS**           conss               /**< indicator constraints */
   )
{
   int j;
   SCIP_Real* obj = NULL;
   int* indices = NULL;
   int cnt = 0;
 
   assert( scip != NULL );
   assert( lp != NULL );
   assert( conss != NULL );
 
   SCIP_CALL( SCIPallocBufferArray(scip, &obj, nconss) );
   SCIP_CALL( SCIPallocBufferArray(scip, &indices, nconss) );
 
   for (j = 0; j < nconss; ++j)
   {
      SCIP_CONSDATA* consdata;
 
      assert( conss[j] != NULL );
      consdata = SCIPconsGetData(conss[j]);
      assert( consdata != NULL );
 
      if ( consdata->colindex >= 0 )
      {
         obj[cnt] = OBJEPSILON;
         indices[cnt++] = consdata->colindex;
      }
   }
 
   if ( cnt > 0 )
   {
      SCIP_CALL( SCIPlpiChgObj(lp, cnt, indices, obj) );
   }
 
   SCIPfreeBufferArray(scip, &indices);
   SCIPfreeBufferArray(scip, &obj);
 
   return SCIP_OKAY;
}
 
 
/** fix variable given by @a S to 0 */
static
SCIP_RETCODE fixAltLPVariables(
   SCIP*                 scip,               /**< SCIP pointer */
   SCIP_LPI*             lp,                 /**< alternative LP */
   int                   nconss,             /**< number of constraints */
   SCIP_CONS**           conss,              /**< indicator constraints */
   SCIP_Bool*            S                   /**< bitset of variables */
   )
{
   SCIP_Real* lb = NULL;
   SCIP_Real* ub = NULL;
   int* indices = NULL;
   int cnt = 0;
   int j;
 
   assert( scip != NULL );
   assert( lp != NULL );
   assert( conss != NULL );
 
   SCIP_CALL( SCIPallocBufferArray(scip, &lb, nconss) );
   SCIP_CALL( SCIPallocBufferArray(scip, &ub, nconss) );
   SCIP_CALL( SCIPallocBufferArray(scip, &indices, nconss) );
 
   /* collect bounds to be changed */
   for (j = 0; j < nconss; ++j)
   {
      SCIP_CONSDATA* consdata;
 
      assert( conss[j] != NULL );
      consdata = SCIPconsGetData(conss[j]);
      assert( consdata != NULL );
 
      if ( consdata->colindex >= 0 )
      {
         if ( S[j] )
         {
            indices[cnt] = consdata->colindex;
            lb[cnt] = 0.0;
            ub[cnt] = 0.0;
            ++cnt;
         }
      }
   }
 
   /* change bounds */
   if ( cnt > 0 )
   {
      SCIP_CALL( SCIPlpiChgBounds(lp, cnt, indices, lb, ub) );
   }
 
   SCIPfreeBufferArray(scip, &indices);
   SCIPfreeBufferArray(scip, &ub);
   SCIPfreeBufferArray(scip, &lb);
 
   return SCIP_OKAY;
}
 
 
/** fix variable @a ind to 0 */
static
SCIP_RETCODE fixAltLPVariable(
   SCIP_LPI*             lp,                 /**< alternative LP */
   int                   ind                 /**< variable that should be fixed to 0 */
   )
{
   SCIP_Real lb = 0.0;
   SCIP_Real ub = 0.0;
 
   /* change bounds */
   SCIP_CALL( SCIPlpiChgBounds(lp, 1, &ind, &lb, &ub) );
 
   return SCIP_OKAY;
}
 
 
/** unfix variable @a ind to 0 */
static
SCIP_RETCODE unfixAltLPVariable(
   SCIP_LPI*             lp,                 /**< alternative LP */
   int                   ind                 /**< variable that should be fixed to 0 */
   )
{
   SCIP_Real lb = 0.0;
   SCIP_Real ub = SCIPlpiInfinity(lp);
 
   /* change bounds */
   SCIP_CALL( SCIPlpiChgBounds(lp, 1, &ind, &lb, &ub) );
 
   return SCIP_OKAY;
}
 
/** unfix variable given by @a S to 0 */
static
SCIP_RETCODE unfixAltLPVariables(
   SCIP*                 scip,               /**< SCIP pointer */
   SCIP_LPI*             lp,                 /**< alternative LP */
   int                   nconss,             /**< number of constraints */
   SCIP_CONS**           conss,              /**< indicator constraints */
   SCIP_Bool*            S                   /**< bitset of variables */
   )
{
   SCIP_Real* lb = NULL;
   SCIP_Real* ub = NULL;
   int* indices = NULL;
   int cnt = 0;
   int j;
 
   assert( scip != NULL );
   assert( lp != NULL );
   assert( conss != NULL );
 
   SCIP_CALL( SCIPallocBufferArray(scip, &lb, nconss) );
   SCIP_CALL( SCIPallocBufferArray(scip, &ub, nconss) );
   SCIP_CALL( SCIPallocBufferArray(scip, &indices, nconss) );
 
   /* collect bounds to be changed */
   for (j = 0; j < nconss; ++j)
   {
      if ( S[j] )
      {
         SCIP_CONSDATA* consdata;
 
         assert( conss[j] != NULL );
         consdata = SCIPconsGetData(conss[j]);
         assert( consdata != NULL );
 
         if ( consdata->colindex >= 0 )
         {
            indices[cnt] = consdata->colindex;
            lb[cnt] = 0.0;
            ub[cnt] = SCIPlpiInfinity(lp);
            ++cnt;
         }
      }
   }
 
   /* change bounds */
   if ( cnt > 0 )
   {
      SCIP_CALL( SCIPlpiChgBounds(lp, cnt, indices, lb, ub) );
   }
 
   SCIPfreeBufferArray(scip, &indices);
   SCIPfreeBufferArray(scip, &ub);
   SCIPfreeBufferArray(scip, &lb);
 
   return SCIP_OKAY;
}
 
 
/** update bounds in first row to the current ones */
static
SCIP_RETCODE updateFirstRow(
   SCIP*                 scip,               /**< SCIP pointer */
   SCIP_CONSHDLRDATA*    conshdlrdata        /**< constraint handler */
   )
{
   SCIP_HASHMAP* lbhash;
   SCIP_HASHMAP* ubhash;
   SCIP_VAR** vars;
   SCIP_LPI* altlp;
   int nvars;
   int cnt;
   int v;
 
   assert( scip != NULL );
   assert( conshdlrdata != NULL );
 
   altlp = conshdlrdata->altlp;
   lbhash = conshdlrdata->lbhash;
   ubhash = conshdlrdata->ubhash;
   assert( lbhash != NULL && ubhash != NULL );
 
   /* check all variables */
   vars = SCIPgetVars(scip);
   nvars = SCIPgetNVars(scip);
   cnt = 0;
 
   for (v = 0; v < nvars; ++v)
   {
      SCIP_VAR* var;
      var = vars[v];
      if ( SCIPhashmapExists(lbhash, var) )
      {
         int col;
 
         col = SCIPhashmapGetImageInt(lbhash, var);
         SCIP_CALL( SCIPlpiChgCoef(altlp, 0, col, -SCIPvarGetLbLocal(var)) );
         if ( ! SCIPisEQ(scip, SCIPvarGetLbLocal(var), SCIPvarGetLbGlobal(var)) )
            ++cnt;
      }
      if ( SCIPhashmapExists(ubhash, var) )
      {
         int col;
 
         col = SCIPhashmapGetImageInt(ubhash, var);
         SCIP_CALL( SCIPlpiChgCoef(altlp, 0, col, SCIPvarGetUbLocal(var)) );
         if ( ! SCIPisEQ(scip, SCIPvarGetUbLocal(var), SCIPvarGetUbGlobal(var)) )
            ++cnt;
      }
   }
   if ( cnt > 10 )
   {
      /* possible force a rescaling: */
      conshdlrdata->scaled = FALSE;
 
      /* SCIP_CALL( SCIPlpiWriteLP(altlp, "altChg.lp") ); */
      SCIPdebugMsg(scip, "Updated bounds of original variables: %d.\n", cnt);
   }
 
   return SCIP_OKAY;
}
 
 
/** update bounds in first row to the global bounds */
static
SCIP_RETCODE updateFirstRowGlobal(
   SCIP*                 scip,               /**< SCIP pointer */
   SCIP_CONSHDLRDATA*    conshdlrdata        /**< constraint handler */
   )
{
   SCIP_HASHMAP* lbhash;
   SCIP_HASHMAP* ubhash;
   SCIP_VAR** vars;
   SCIP_LPI* altlp;
   int nvars;
   int cnt;
   int v;
 
   assert( scip != NULL );
   assert( conshdlrdata != NULL );
 
   altlp = conshdlrdata->altlp;
   lbhash = conshdlrdata->lbhash;
   ubhash = conshdlrdata->ubhash;
   assert( lbhash != NULL && ubhash != NULL );
 
   /* check all variables */
   vars = SCIPgetVars(scip);
   nvars = SCIPgetNVars(scip);
   cnt = 0;
 
   for (v = 0; v < nvars; ++v)
   {
      SCIP_VAR* var;
      int col;
 
      var = vars[v];
      if ( SCIPhashmapExists(lbhash, var) )
      {
         col = SCIPhashmapGetImageInt(lbhash, var);
         SCIP_CALL( SCIPlpiChgCoef(altlp, 0, col, -SCIPvarGetLbGlobal(var)) );
         ++cnt;
      }
      if ( SCIPhashmapExists(ubhash, var) )
      {
         col = SCIPhashmapGetImageInt(ubhash, var);
         SCIP_CALL( SCIPlpiChgCoef(altlp, 0, col, SCIPvarGetUbGlobal(var)) );
         ++cnt;
      }
   }
 
   if ( cnt > 0 )
   {
      /* SCIP_CALL( SCIPlpiWriteLP(altlp, "altChg.lp") ); */
      SCIPdebugMsg(scip, "Updated bounds of original variables: %d.\n", cnt);
   }
 
   /* possible force a rescaling: */
   /* conshdlrdata->scaled = FALSE; */
 
   return SCIP_OKAY;
}
 
 
/** check whether IIS defined by @a vector corresponds to a local cut */
static
SCIP_RETCODE checkIISlocal(
   SCIP*                 scip,               /**< SCIP pointer */
   SCIP_CONSHDLRDATA*    conshdlrdata,       /**< constraint handler */
   SCIP_Real*            vector,             /**< solution to alternative LP defining IIS */
   SCIP_Bool*            isLocal             /**< whether the IIS uses local bounds different from the global ones */
   )
{
   SCIP_HASHMAP* lbhash;
   SCIP_HASHMAP* ubhash;
   SCIP_VAR** vars;
#ifndef NDEBUG
   int nCols;
#endif
   int nvars;
   int v;
 
   assert( scip != NULL );
   assert( conshdlrdata != NULL );
   assert( vector != NULL );
   assert( isLocal != NULL );
 
   *isLocal = FALSE;
 
#ifndef NDEBUG
   SCIP_CALL( SCIPlpiGetNCols(conshdlrdata->altlp, &nCols) );
#endif
 
   lbhash = conshdlrdata->lbhash;
   ubhash = conshdlrdata->ubhash;
   assert( lbhash != NULL && ubhash != NULL );
 
   /* get all variables */
   vars = SCIPgetVars(scip);
   nvars = SCIPgetNVars(scip);
 
   /* check all variables */
   for (v = 0; v < nvars; ++v)
   {
      SCIP_VAR* var;
      var = vars[v];
 
      /* if local bound is different from global bound */
      if ( ! SCIPisEQ(scip, SCIPvarGetLbLocal(var), SCIPvarGetLbGlobal(var)) )
      {
         /* check whether the variable corresponding to the lower bounds has been used */
         if ( SCIPhashmapExists(lbhash, var) )
         {
            int col;
 
            col = SCIPhashmapGetImageInt(lbhash, var);
            assert( 0 <= col && col < nCols );
            if ( ! SCIPisFeasZero(scip, vector[col]) )
            {
               *isLocal = TRUE;
               return SCIP_OKAY;
            }
         }
      }
 
      /* if local bound is different from global bound */
      if ( ! SCIPisEQ(scip, SCIPvarGetUbLocal(var), SCIPvarGetUbGlobal(var)) )
      {
         /* check whether the variable corresponding to the upper bounds has been used */
         if ( SCIPhashmapExists(ubhash, var) )
         {
            int col;
 
            col = SCIPhashmapGetImageInt(ubhash, var);
            assert( 0 <= col && col < nCols );
            if ( ! SCIPisFeasZero(scip, vector[col]) )
            {
               *isLocal = TRUE;
               return SCIP_OKAY;
            }
         }
      }
   }
 
   return SCIP_OKAY;
}
 
 
/** compute scaling for first row
 *
 *  If the coefficients in the first row are large, a right hand side of -1 might not be
 *  adequate. Here, we replace the right hand side by the sum of the coefficients divided by the
 *  number of nonzeros.
 */
static
SCIP_RETCODE scaleFirstRow(
   SCIP*                 scip,               /**< SCIP pointer */
   SCIP_CONSHDLRDATA*    conshdlrdata        /**< constraint handler */
   )
{
   assert( scip != NULL );
   assert( conshdlrdata != NULL );
 
   if ( ! conshdlrdata->scaled )
   {
      SCIP_Real* val;
      SCIP_LPI* altlp;
      int* ind;
      SCIP_Real sum = 0.0;
      int beg[1];
      int nCols;
      int cnt;
      int j;
 
      altlp = conshdlrdata->altlp;
      SCIP_CALL( SCIPlpiGetNCols(altlp, &nCols) );
      SCIP_CALL( SCIPallocBufferArray(scip, &ind, nCols) );
      SCIP_CALL( SCIPallocBufferArray(scip, &val, nCols) );
 
      SCIP_CALL( SCIPlpiGetRows(altlp, 0, 0, NULL, NULL, &cnt, beg, ind, val) );
 
      if ( cnt > 0 )
      {
         /* compute sum */
         for (j = 0; j < cnt; ++j)
            sum += REALABS(val[j]);
 
         /* set rhs */
         sum = - REALABS(sum) / ((double) cnt);
         j = 0;
         SCIP_CALL( SCIPlpiChgSides(altlp, 1, &j, &sum, &sum) );
      }
 
      SCIPfreeBufferArray(scip, &val);
      SCIPfreeBufferArray(scip, &ind);
 
      conshdlrdata->scaled = TRUE;
   }
 
   return SCIP_OKAY;
}
 
 
/** add column to alternative LP
 *
 *  See the description at the top of the file for more information.
 */
static
SCIP_RETCODE addAltLPColumn(
   SCIP*                 scip,               /**< SCIP pointer */
   SCIP_CONSHDLR*        conshdlr,           /**< constraint handler */
   SCIP_CONSHDLRDATA*    conshdlrdata,       /**< data of constraint handler */
   SCIP_VAR*             slackvar,           /**< slack variable or NULL */
   int                   nvars,              /**< number of variables in column */
   SCIP_VAR**            vars,               /**< variables for column */
   SCIP_Real*            vals,               /**< values for column */
   SCIP_Real             rhscoef,            /**< coefficient for first row */
   SCIP_Real             objcoef,            /**< objective in alternative LP */
   SCIP_Real             sign,               /**< sign (+1,-1) for column */
   SCIP_Bool             colfree,            /**< whether column should be free, e.g., for equations */
   int*                  colindex            /**< index of new column (return value) */
   )
{
   SCIP_VAR** newvars;
   SCIP_Real val;
   SCIP_Real* matval;
   SCIP_Bool* newrowsslack;
   SCIP_Real* obj;
   SCIP_Real* lb;
   SCIP_Real* ub;
   int* matbeg;
   int* matind;
   int nnewvars = 0;
   int nnewcols = 0;
   int nnewrows = 0;
   int ncols = 0;
   int cnt = 0;
   int v;
 
   assert( scip != NULL );
   assert( conshdlrdata != NULL );
   assert( vars != NULL || nvars == 0 );
   assert( vals != NULL || nvars == 0 );
   assert( ! SCIPisInfinity(scip, rhscoef) && ! SCIPisInfinity(scip, -rhscoef) );
   assert( SCIPisEQ(scip, sign, 1.0) || SCIPisEQ(scip, sign, -1.0) );
   assert( colindex != NULL );
 
   *colindex = -1;
 
   if ( conshdlrdata->altlp == NULL )
   {
      SCIP_CALL( initAlternativeLP(scip, conshdlr) );
   }
   assert( conshdlrdata->altlp != NULL );
   assert( conshdlrdata->varhash != NULL );
   assert( conshdlrdata->lbhash != NULL );
   assert( conshdlrdata->ubhash != NULL );
   assert( conshdlrdata->slackhash != NULL );
 
#ifndef NDEBUG
   {
      int nrows;
      SCIP_CALL( SCIPlpiGetNRows(conshdlrdata->altlp, &nrows) );
      assert( nrows == conshdlrdata->nrows );
   }
#endif
 
   /* set up data for construction */
   SCIP_CALL( SCIPallocBufferArray(scip, &matbeg, nvars) );
   SCIP_CALL( SCIPallocBufferArray(scip, &matind, 4 * nvars) );
   SCIP_CALL( SCIPallocBufferArray(scip, &matval, 4 * nvars) );
   SCIP_CALL( SCIPallocBufferArray(scip, &obj, 2 * nvars) );
   SCIP_CALL( SCIPallocBufferArray(scip, &lb, 2 * nvars) );
   SCIP_CALL( SCIPallocBufferArray(scip, &ub, 2 * nvars) );
   SCIP_CALL( SCIPallocBufferArray(scip, &newvars, nvars) );
   SCIP_CALL( SCIPallocBufferArray(scip, &newrowsslack, 2 * nvars) );
 
   /* store index of column in constraint */
   /* coverity[var_deref_model] */
   SCIP_CALL( SCIPlpiGetNCols(conshdlrdata->altlp, &ncols) );
   *colindex = ncols;
 
   /* handle first row */
   if ( ! SCIPisFeasZero(scip, rhscoef) )
   {
      matind[cnt] = 0;
      matval[cnt++] = sign * rhscoef;
   }
 
   /* set up column (recognize new original variables) */
   for (v = 0; v < nvars; ++v)
   {
      SCIP_VAR* var;
 
      var = vars[v];
      assert( var != NULL );
 
      /* if variable is a slack variable */
      if ( SCIPhashmapExists(conshdlrdata->slackhash, var) )
      {
         /* to avoid trivial rows: only add row corresponding to slack variable if it appears outside its own constraint */
         if ( var != slackvar )
         {
            int ind;
 
            ind = SCIPhashmapGetImageInt(conshdlrdata->slackhash, var);
 
            if ( ind < INT_MAX )
               matind[cnt] = ind;
            else
            {
               /* correct number of variable already in map/array and remember to add a new row */
               SCIP_CALL( SCIPhashmapSetImageInt(conshdlrdata->slackhash, var, conshdlrdata->nrows) );
               assert( conshdlrdata->nrows == SCIPhashmapGetImageInt(conshdlrdata->slackhash, var) );
               SCIPdebugMsg(scip, "Inserted slack variable <%s> into hashmap (row: %d).\n", SCIPvarGetName(var), conshdlrdata->nrows);
               matind[cnt] = (conshdlrdata->nrows)++;
 
               /* store new variables */
               newrowsslack[nnewrows++] = TRUE;
            }
            assert( conshdlrdata->nrows >= SCIPhashmapGetImageInt(conshdlrdata->slackhash, var) );
            matval[cnt++] = sign * vals[v];
         }
      }
      else
      {
         /* if variable exists */
         if ( SCIPhashmapExists(conshdlrdata->varhash, var) )
            matind[cnt] = SCIPhashmapGetImageInt(conshdlrdata->varhash, var);
         else
         {
            /* add variable in map and array and remember to add a new row */
            SCIP_CALL( SCIPhashmapInsertInt(conshdlrdata->varhash, var, conshdlrdata->nrows) );
            assert( conshdlrdata->nrows == SCIPhashmapGetImageInt(conshdlrdata->varhash, var) );
            SCIPdebugMsg(scip, "Inserted variable <%s> into hashmap (row: %d).\n", SCIPvarGetName(var), conshdlrdata->nrows);
            matind[cnt] = (conshdlrdata->nrows)++;
 
            /* store new variables */
            newrowsslack[nnewrows++] = FALSE;
            newvars[nnewvars++] = var;
         }
         assert( SCIPhashmapExists(conshdlrdata->varhash, var) );
         matval[cnt++] = sign * vals[v];
      }
   }
 
   /* add new rows */
   if ( nnewrows > 0 )
   {
      SCIP_Real* lhs;
      SCIP_Real* rhs;
      int i;
 
      SCIP_CALL( SCIPallocBufferArray(scip, &lhs, nnewrows) );
      SCIP_CALL( SCIPallocBufferArray(scip, &rhs, nnewrows) );
      for (i = 0; i < nnewrows; ++i)
      {
         if ( newrowsslack[i] )
            lhs[i] = -SCIPlpiInfinity(conshdlrdata->altlp);
         else
            lhs[i] = 0.0;
         rhs[i] = 0.0;
      }
      /* add new rows */
      SCIP_CALL( SCIPlpiAddRows(conshdlrdata->altlp, nnewrows, lhs, rhs, NULL, 0, NULL, NULL, NULL) );
 
      SCIPfreeBufferArray(scip, &lhs);
      SCIPfreeBufferArray(scip, &rhs);
   }
 
   /* now add column */
   obj[0] = objcoef;
   if ( colfree )
   {
      /* create a free variable -> should only happen for additional linear constraints */
      assert( slackvar == NULL );
      lb[0] = -SCIPlpiInfinity(conshdlrdata->altlp);
   }
   else
      lb[0] = 0.0;
   ub[0] = SCIPlpiInfinity(conshdlrdata->altlp);
   matbeg[0] = 0;
 
   SCIP_CALL( SCIPlpiAddCols(conshdlrdata->altlp, 1, obj, lb, ub, NULL, cnt, matbeg, matind, matval) );
 
   /* add columns corresponding to bounds of original variables - no bounds needed for slack vars */
   cnt = 0;
   for (v = 0; v < nnewvars; ++v)
   {
      SCIP_VAR* var = newvars[v];
      assert( var != NULL );
 
      /* if the lower bound is finite */
      val  = SCIPvarGetLbGlobal(var);
      if ( ! SCIPisInfinity(scip, -val) )
      {
         matbeg[nnewcols] = cnt;
         if ( ! SCIPisZero(scip, val) )
         {
            matind[cnt] = 0;
            matval[cnt++] = -val;
         }
         assert( SCIPhashmapExists(conshdlrdata->varhash, var) );
 
         matind[cnt] = SCIPhashmapGetImageInt(conshdlrdata->varhash, var);
         matval[cnt++] = -1.0;
         obj[nnewcols] = 0.0;
         lb[nnewcols] = 0.0;
         ub[nnewcols] = SCIPlpiInfinity(conshdlrdata->altlp);
         ++conshdlrdata->nlbbounds;
 
         SCIP_CALL( SCIPhashmapInsertInt(conshdlrdata->lbhash, var, ncols + 1 + nnewcols) );
         assert( SCIPhashmapExists(conshdlrdata->lbhash, var) );
         SCIPdebugMsg(scip, "Added column for lower bound (%f) of variable <%s> to alternative polyhedron (col: %d).\n",
            val, SCIPvarGetName(var), ncols + 1 + nnewcols);
         ++nnewcols;
      }
 
      /* if the upper bound is finite */
      val = SCIPvarGetUbGlobal(var);
      if ( ! SCIPisInfinity(scip, val) )
      {
         matbeg[nnewcols] = cnt;
         if ( ! SCIPisZero(scip, val) )
         {
            matind[cnt] = 0;
            matval[cnt++] = val;
         }
         assert( SCIPhashmapExists(conshdlrdata->varhash, var) );
 
         matind[cnt] = SCIPhashmapGetImageInt(conshdlrdata->varhash, var);
         matval[cnt++] = 1.0;
         obj[nnewcols] = 0.0;
         lb[nnewcols] = 0.0;
         ub[nnewcols] = SCIPlpiInfinity(conshdlrdata->altlp);
         ++conshdlrdata->nubbounds;
 
         SCIP_CALL( SCIPhashmapInsertInt(conshdlrdata->ubhash, var, ncols + 1 + nnewcols) );
         assert( SCIPhashmapExists(conshdlrdata->ubhash, var) );
         SCIPdebugMsg(scip, "Added column for upper bound (%f) of variable <%s> to alternative polyhedron (col: %d).\n",
            val, SCIPvarGetName(var), ncols + 1 + nnewcols);
         ++nnewcols;
      }
   }
 
   /* add columns if necessary */
   if ( nnewcols > 0 )
   {
      SCIP_CALL( SCIPlpiAddCols(conshdlrdata->altlp, nnewcols, obj, lb, ub, NULL, cnt, matbeg, matind, matval) );
   }
 
#ifndef NDEBUG
   SCIP_CALL( SCIPlpiGetNCols(conshdlrdata->altlp, &cnt) );
   assert( cnt == ncols + nnewcols + 1 );
#endif
 
   SCIPfreeBufferArray(scip, &ub);
   SCIPfreeBufferArray(scip, &lb);
   SCIPfreeBufferArray(scip, &obj);
   SCIPfreeBufferArray(scip, &matind);
   SCIPfreeBufferArray(scip, &matval);
   SCIPfreeBufferArray(scip, &matbeg);
   SCIPfreeBufferArray(scip, &newvars);
   SCIPfreeBufferArray(scip, &newrowsslack);
 
   conshdlrdata->scaled = FALSE;
 
#ifdef SCIP_OUTPUT
   SCIP_CALL( SCIPlpiWriteLP(conshdlrdata->altlp, "alt.lp") );
#endif
 
   return SCIP_OKAY;
}
 
 
/** add column corresponding to constraint to alternative LP
 *
 *  See the description at the top of the file for more information.
 */
static
SCIP_RETCODE addAltLPConstraint(
   SCIP*                 scip,               /**< SCIP pointer */
   SCIP_CONSHDLR*        conshdlr,           /**< constraint handler */
   SCIP_CONS*            lincons,            /**< linear constraint */
   SCIP_VAR*             slackvar,           /**< slack variable or NULL */
   SCIP_Real             objcoef,            /**< objective coefficient */
   int*                  colindex            /**< index of new column */
   )
{
   SCIP_CONSHDLRDATA* conshdlrdata;
   SCIP_VAR** linvars;
   SCIP_Real* linvals;
   SCIP_Real linrhs;
   SCIP_Real linlhs;
   int nlinvars;
 
   assert( scip != NULL );
   assert( conshdlr != NULL );
   assert( lincons != NULL );
   assert( colindex != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   *colindex = -1;
 
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
 
   /* if the slack variable is aggregated (multi-aggregation should not happen) */
   assert( slackvar == NULL || SCIPvarGetStatus(slackvar) != SCIP_VARSTATUS_MULTAGGR );
   if ( slackvar != NULL && SCIPvarGetStatus(slackvar) == SCIP_VARSTATUS_AGGREGATED )
   {
      SCIP_VAR* var;
      SCIP_Real scalar = 1.0;
      SCIP_Real constant = 0.0;
 
      var = slackvar;
 
      SCIP_CALL( SCIPgetProbvarSum(scip, &var, &scalar, &constant) );
 
      SCIPdebugMsg(scip, "Slack variable is aggregated (scalar: %f, constant: %f).\n", scalar, constant);
 
      /* if the slack variable is fixed */
      if ( SCIPisZero(scip, scalar) && ! SCIPconsIsActive(lincons) )
         return SCIP_OKAY;
 
      /* otherwise construct a linear constraint */
      SCIP_CALL( SCIPallocBufferArray(scip, &linvars, 1) );
      SCIP_CALL( SCIPallocBufferArray(scip, &linvals, 1) );
      linvars[0] = var;
      linvals[0] = scalar;
      nlinvars = 1;
      linlhs = -SCIPinfinity(scip);
      linrhs = constant;
   }
   else
   {
      /* exit if linear constraint is not active */
      if ( ! SCIPconsIsActive(lincons) && slackvar != NULL )
         return SCIP_OKAY;
 
      /* in this case, the linear constraint is directly usable */
      linvars = SCIPgetVarsLinear(scip, lincons);
      linvals = SCIPgetValsLinear(scip, lincons);
      nlinvars = SCIPgetNVarsLinear(scip, lincons);
      linlhs = SCIPgetLhsLinear(scip, lincons);
      linrhs = SCIPgetRhsLinear(scip, lincons);
   }
 
   /* create column */
   if ( SCIPisEQ(scip, linlhs, linrhs) )
   {
      /* create free variable for equations (should only happen for additional linear constraints) */
      SCIP_CALL( addAltLPColumn(scip, conshdlr, conshdlrdata, slackvar, nlinvars, linvars, linvals, linrhs, objcoef, 1.0, TRUE, colindex) );
   }
   else if ( ! SCIPisInfinity(scip, linrhs) )
   {
      /* create column for rhs */
      SCIP_CALL( addAltLPColumn(scip, conshdlr, conshdlrdata, slackvar, nlinvars, linvars, linvals, linrhs, objcoef, 1.0, FALSE, colindex) );
   }
   else
   {
      /* create column for lhs */
      assert( ! SCIPisInfinity(scip, -linlhs) );
      SCIP_CALL( addAltLPColumn(scip, conshdlr, conshdlrdata, slackvar, nlinvars, linvars, linvals, linlhs, objcoef, -1.0, FALSE, colindex) );
   }
 
   if ( slackvar != NULL && SCIPvarGetStatus(slackvar) == SCIP_VARSTATUS_AGGREGATED )
   {
      SCIPfreeBufferArray(scip, &linvals);
      SCIPfreeBufferArray(scip, &linvars);
   }
 
   return SCIP_OKAY;
}
 
 
/** add column corresponding to row to alternative LP
 *
 *  See the description at the top of the file for more information.
 */
static
SCIP_RETCODE addAltLPRow(
   SCIP*                 scip,               /**< SCIP pointer */
   SCIP_CONSHDLR*        conshdlr,           /**< constraint handler */
   SCIP_ROW*             row,                /**< row to add */
   SCIP_Real             objcoef,            /**< objective coefficient */
   int*                  colindex            /**< index of new column */
   )
{
   SCIP_CONSHDLRDATA* conshdlrdata;
   SCIP_COL** rowcols;
   SCIP_Real* rowvals;
   SCIP_VAR** rowvars;
   SCIP_Real rowrhs;
   SCIP_Real rowlhs;
   int nrowcols;
   int j;
 
   assert( scip != NULL );
   assert( conshdlr != NULL );
   assert( row != NULL );
   assert( colindex != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   /* initialize data */
   *colindex = -1;
 
   /* exit if row is not global */
   if ( SCIProwIsLocal(row) )
      return SCIP_OKAY;
 
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
 
   /* get row data */
   rowcols = SCIProwGetCols(row);
   rowvals = SCIProwGetVals(row);
   nrowcols = SCIProwGetNNonz(row);
   rowlhs = SCIProwGetLhs(row) - SCIProwGetConstant(row);
   rowrhs = SCIProwGetRhs(row) - SCIProwGetConstant(row);
 
   SCIP_CALL( SCIPallocBufferArray(scip, &rowvars, nrowcols) );
   for (j = 0; j < nrowcols; ++j)
   {
      rowvars[j] = SCIPcolGetVar(rowcols[j]);
      assert( rowvars[j] != NULL );
   }
 
   /* create column */
   if ( SCIPisEQ(scip, rowlhs, rowrhs) )
   {
      /* create free variable for equations (should only happen for additional linear constraints) */
      SCIP_CALL( addAltLPColumn(scip, conshdlr, conshdlrdata, NULL, nrowcols, rowvars, rowvals, rowrhs, objcoef, 1.0, TRUE, colindex) );
   }
   else if ( ! SCIPisInfinity(scip, rowrhs) )
   {
      /* create column for rhs */
      SCIP_CALL( addAltLPColumn(scip, conshdlr, conshdlrdata, NULL, nrowcols, rowvars, rowvals, rowrhs, objcoef, 1.0, FALSE, colindex) );
   }
   else
   {
      /* create column for lhs */
      assert( ! SCIPisInfinity(scip, -rowlhs) );
      SCIP_CALL( addAltLPColumn(scip, conshdlr, conshdlrdata, NULL, nrowcols, rowvars, rowvals, rowlhs, objcoef, -1.0, FALSE, colindex) );
   }
 
   SCIPfreeBufferArray(scip, &rowvars);
 
   return SCIP_OKAY;
}
 
 
/** try to add objective cut as column to alternative LP */
static
SCIP_RETCODE addObjcut(
   SCIP*                 scip,               /**< SCIP pointer */
   SCIP_CONSHDLR*        conshdlr            /**< constraint handler */
   )
{
   SCIP_CONSHDLRDATA* conshdlrdata;
   SCIP_VAR** objvars;
   SCIP_Real* objvals;
   SCIP_VAR** vars;
   int nobjvars = 0;
   int nvars;
   int v;
 
   assert( scip != NULL );
   assert( conshdlr != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
 
   /* skip procedure if already added */
   if ( conshdlrdata->objcutindex >= 0 )
      return SCIP_OKAY;
 
   /* check whether we can add objective cut: all indicator variables have zero objective */
   if ( ! conshdlrdata->objothervarsonly )
      return SCIP_OKAY;
 
   assert( ! SCIPisInfinity(scip, conshdlrdata->objupperbound) );
   SCIPdebugMsg(scip, "Add objective cut to alternative LP (obj. bound: %g).\n", conshdlrdata->objupperbound);
 
   SCIP_CALL( SCIPgetVarsData(scip, &vars, &nvars, NULL, NULL, NULL, NULL) );
   SCIP_CALL( SCIPallocBufferArray(scip, &objvars, nvars) );
   SCIP_CALL( SCIPallocBufferArray(scip, &objvals, nvars) );
 
   /* collect nonzeros */
   for (v = 0; v < nvars; ++v)
   {
      SCIP_VAR* var;
      SCIP_Real objval;
 
      var = vars[v];
      assert( var != NULL );
      objval = SCIPvarGetObj(var);
 
      /* skip variables with zero objective - this includes slack and indicator variables */
      if ( ! SCIPisZero(scip, objval) )
      {
         objvars[nobjvars] = var;
         objvals[nobjvars++] = objval;
      }
   }
 
   /* create column (with rhs = upperbound, objective 0, and scaling factor 1.0) */
   SCIP_CALL( addAltLPColumn(scip, conshdlr, conshdlrdata, NULL, nobjvars, objvars, objvals, conshdlrdata->objupperbound, 0.0, 1.0, FALSE, &conshdlrdata->objcutindex) );
   assert( conshdlrdata->objcutindex >= 0 );
   conshdlrdata->objaltlpbound = conshdlrdata->objupperbound;
 
   SCIPfreeBufferArray(scip, &objvals);
   SCIPfreeBufferArray(scip, &objvars);
 
   return SCIP_OKAY;
}
 
 
/** delete column corresponding to constraint in alternative LP
 *
 *  We currently just fix the corresponding variable to 0.
 */
static
SCIP_RETCODE deleteAltLPConstraint(
   SCIP*                 scip,               /**< SCIP pointer */
   SCIP_CONSHDLR*        conshdlr,           /**< constraint handler */
   SCIP_CONS*            cons                /**< indicator constraint */
   )
{
   SCIP_CONSHDLRDATA* conshdlrdata;
 
   assert( scip != NULL );
   assert( conshdlr != NULL );
   assert( cons != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
 
   if ( conshdlrdata->altlp != NULL )
   {
      SCIP_CONSDATA* consdata;
 
      consdata = SCIPconsGetData(cons);
      assert( consdata != NULL );
 
      if ( consdata->colindex >= 0 )
      {
         SCIP_CALL( fixAltLPVariable(conshdlrdata->altlp, consdata->colindex) );
      }
      consdata->colindex = -1;
 
      SCIPdebugMsg(scip, "Fixed variable for column %d (constraint: <%s>) from alternative LP to 0.\n", consdata->colindex, SCIPconsGetName(cons));
   }
   conshdlrdata->scaled = FALSE;
 
   return SCIP_OKAY;
}
 
 
/** update upper bound in alternative LP */
static
SCIP_RETCODE updateObjUpperbound(
   SCIP*                 scip,               /**< SCIP pointer */
   SCIP_CONSHDLR*        conshdlr,           /**< constraint handler */
   SCIP_CONSHDLRDATA*    conshdlrdata        /**< constraint handler data */
   )
{
   SCIP_Real objbnd;
 
   assert( scip != NULL );
   assert( conshdlrdata != NULL );
 
   if ( ! conshdlrdata->useobjectivecut )
      return SCIP_OKAY;
 
   if ( conshdlrdata->altlp == NULL )
      return SCIP_OKAY;
 
   /* first check whether we can improve the upper bound */
   objbnd = SCIPgetUpperbound(scip);
   if ( ! SCIPisInfinity(scip, objbnd) )
   {
      if ( SCIPisObjIntegral(scip) )
         objbnd = SCIPfeasCeil(scip, objbnd) - (1.0 - SCIPcutoffbounddelta(scip));
      else
         objbnd -= SCIPcutoffbounddelta(scip);
 
      if ( SCIPisLT(scip, objbnd, conshdlrdata->objupperbound) )
         conshdlrdata->objupperbound = objbnd;
   }
 
   if ( SCIPisInfinity(scip, conshdlrdata->objupperbound) )
      return SCIP_OKAY;
 
   /* if we can improve on the bound stored in the alternative LP */
   if ( SCIPisLT(scip, conshdlrdata->objupperbound, conshdlrdata->objaltlpbound) )
   {
      SCIPdebugMsg(scip, "Update objective bound to %g.\n", conshdlrdata->objupperbound);
 
      /* possibly add column for objective cut */
      if ( conshdlrdata->objcutindex < 0 )
      {
         SCIP_CALL( addObjcut(scip, conshdlr) );
      }
      else
      {
#ifndef NDEBUG
         SCIP_Real oldbnd;
         SCIP_CALL( SCIPlpiGetCoef(conshdlrdata->altlp, 0, conshdlrdata->objcutindex, &oldbnd) );
         assert( SCIPisEQ(scip, oldbnd, conshdlrdata->objaltlpbound) );
#endif
 
         /* update bound */
         SCIP_CALL( SCIPlpiChgCoef(conshdlrdata->altlp, 0, conshdlrdata->objcutindex, conshdlrdata->objupperbound) );
         conshdlrdata->objaltlpbound = conshdlrdata->objupperbound;
 
#ifdef SCIP_OUTPUT
         SCIP_CALL( SCIPlpiWriteLP(conshdlrdata->altlp, "alt.lp") );
#endif
      }
   }
 
   return SCIP_OKAY;
}
 
 
/** check whether the given LP is infeasible
 *
 *  If @a primal is false we assume that the problem is <em>dual feasible</em>, e.g., the problem
 *  was only changed by fixing bounds!
 *
 *  This is the workhorse for all methods that have to solve the alternative LP. We try in several
 *  ways to recover from possible stability problems.
 *
 *  @pre It is assumed that all parameters for the alternative LP are set.
 */
static
SCIP_RETCODE checkAltLPInfeasible(
   SCIP*                 scip,               /**< SCIP pointer */
   SCIP_LPI*             lp,                 /**< LP */
   SCIP_Real             maxcondition,       /**< maximal allowed condition of LP solution basis matrix */
   SCIP_Bool             primal,             /**< whether we are using the primal or dual simplex */
   SCIP_Bool*            infeasible,         /**< output: whether the LP is infeasible */
   SCIP_Bool*            error               /**< output: whether an error occurred */
   )
{
   SCIP_RETCODE retcode;
   SCIP_Real condition;
 
   assert( scip != NULL );
   assert( lp != NULL );
   assert( infeasible != NULL );
   assert( error != NULL );
 
   *error = FALSE;
 
   /* solve LP */
   if ( primal )
      retcode = SCIPlpiSolvePrimal(lp);  /* use primal simplex */
   else
      retcode = SCIPlpiSolveDual(lp);    /* use dual simplex */
   if ( retcode == SCIP_LPERROR )
   {
      *error = TRUE;
      return SCIP_OKAY;
   }
   SCIP_CALL( retcode );
 
   /* resolve if LP is not stable */
   if ( ! SCIPlpiIsStable(lp) )
   {
      SCIP_CALL_PARAM( SCIPlpiSetIntpar(lp, SCIP_LPPAR_FROMSCRATCH, TRUE) );
      SCIP_CALL_PARAM( SCIPlpiSetIntpar(lp, SCIP_LPPAR_PRESOLVING, FALSE) );
      SCIPwarningMessage(scip, "Numerical problems, retrying ...\n");
 
      /* re-solve LP */
      if ( primal )
         retcode = SCIPlpiSolvePrimal(lp);  /* use primal simplex */
      else
         retcode = SCIPlpiSolveDual(lp);    /* use dual simplex */
 
      /* reset parameters */
      SCIP_CALL_PARAM( SCIPlpiSetIntpar(lp, SCIP_LPPAR_FROMSCRATCH, FALSE) );
      SCIP_CALL_PARAM( SCIPlpiSetIntpar(lp, SCIP_LPPAR_PRESOLVING, TRUE) );
 
      if ( retcode == SCIP_LPERROR )
      {
         *error = TRUE;
         return SCIP_OKAY;
      }
      SCIP_CALL( retcode );
   }
 
   /* check whether we want to ignore the result, because the condition number is too large */
   if ( maxcondition > 0.0 )
   {
      /* check estimated condition number of basis matrix */
      SCIP_CALL( SCIPlpiGetRealSolQuality(lp, SCIP_LPSOLQUALITY_ESTIMCONDITION, &condition) );
      if ( condition != SCIP_INVALID && condition > maxcondition )  /*lint !e777*/
      {
         SCIPdebugMsg(scip, "Estimated condition number of basis matrix (%e) exceeds maximal allowance (%e).\n", condition, maxcondition);
 
         *error = TRUE;
 
         return SCIP_OKAY;
      }
      else if ( condition != SCIP_INVALID )  /*lint !e777*/
      {
         SCIPdebugMsg(scip, "Estimated condition number of basis matrix (%e) is below maximal allowance (%e).\n", condition, maxcondition);
      }
      else
      {
         SCIPdebugMsg(scip, "Estimated condition number of basis matrix not available.\n");
      }
   }
 
   /* check whether we are in the paradoxical situation that
    * - the primal is not infeasible
    * - the primal is not unbounded
    * - the LP is not optimal
    * - we have a primal ray
    *
    * If we ran the dual simplex algorithm, then we run again with the primal simplex
    */
   if ( ! SCIPlpiIsPrimalInfeasible(lp) && ! SCIPlpiIsPrimalUnbounded(lp) &&
        ! SCIPlpiIsOptimal(lp) && SCIPlpiExistsPrimalRay(lp) && ! primal )
   {
      SCIPwarningMessage(scip, "The dual simplex produced a primal ray. Retrying with primal ...\n");
 
      /* the following settings might be changed: */
      SCIP_CALL_PARAM( SCIPlpiSetIntpar(lp, SCIP_LPPAR_FROMSCRATCH, TRUE) );
      SCIP_CALL_PARAM( SCIPlpiSetIntpar(lp, SCIP_LPPAR_PRESOLVING, TRUE) );
      SCIP_CALL_PARAM( SCIPlpiSetIntpar(lp, SCIP_LPPAR_SCALING, 1) );
 
      SCIP_CALL( SCIPlpiSolvePrimal(lp) );   /* use primal simplex */
 
      /* reset parameters */
      SCIP_CALL_PARAM( SCIPlpiSetIntpar(lp, SCIP_LPPAR_FROMSCRATCH, FALSE) );
      SCIP_CALL_PARAM( SCIPlpiSetIntpar(lp, SCIP_LPPAR_PRESOLVING, TRUE) );
      SCIP_CALL_PARAM( SCIPlpiSetIntpar(lp, SCIP_LPPAR_SCALING, 1) );
   }
 
   /* examine LP solution status */
   if ( SCIPlpiIsPrimalInfeasible(lp) )     /* the LP is provably infeasible */
   {
      assert( ! SCIPlpiIsPrimalUnbounded(lp) );   /* can't be unbounded or optimal */
      assert( ! SCIPlpiIsOptimal(lp) );           /* if it is infeasible! */
 
      *infeasible = TRUE;                         /* LP is infeasible */
      return SCIP_OKAY;
   }
   else
   {
      /* By assumption the dual is feasible if the dual simplex is run, therefore
       * the status has to be primal unbounded or optimal. */
      if ( ! SCIPlpiIsPrimalUnbounded(lp) && ! SCIPlpiIsOptimal(lp) )
      {
         /* We have a status different from unbounded or optimal. This should not be the case ... */
         if (primal)
            SCIPwarningMessage(scip, "Primal simplex returned with unknown status: %d\n", SCIPlpiGetInternalStatus(lp));
         else
            SCIPwarningMessage(scip, "Dual simplex returned with unknown status: %d\n", SCIPlpiGetInternalStatus(lp));
 
         /* SCIP_CALL( SCIPlpiWriteLP(lp, "debug.lp") ); */
         *error = TRUE;
         return SCIP_OKAY;
      }
   }
 
   /* at this point we have a feasible solution */
   *infeasible = FALSE;
   return SCIP_OKAY;
}
 
 
/** tries to extend a given set of variables to a cover
 *
 *  At each step we include a variable which covers a new IIS. The corresponding IIS inequalities are added to the LP,
 *  if this not already happened.
 *
 *  @pre It is assumed that all parameters for the alternative LP are set and that the variables
 *  corresponding to @a S are fixed. Furthermore @c xVal_ should contain the current LP solution.
 */
static
SCIP_RETCODE extendToCover(
   SCIP*                 scip,               /**< SCIP pointer */
   SCIP_CONSHDLR*        conshdlr,           /**< constraint handler */
   SCIP_CONSHDLRDATA*    conshdlrdata,       /**< constraint handler data */
   SCIP_LPI*             lp,                 /**< LP */
   SCIP_SOL*             sol,                /**< solution to be separated */
   SCIP_ENFOSEPATYPE     enfosepatype,       /**< type of enforcing/separating type */
   SCIP_Bool             removable,          /**< whether cuts should be removable */
   SCIP_Bool             genlogicor,         /**< should logicor constraints be generated? */
   int                   nconss,             /**< number of constraints */
   SCIP_CONS**           conss,              /**< indicator constraints */
   SCIP_Bool*            S,                  /**< bitset of variables */
   int*                  size,               /**< size of S */
   SCIP_Real*            value,              /**< objective value of S */
   SCIP_Bool*            error,              /**< output: whether an error occurred */
   SCIP_Bool*            cutoff,             /**< whether we detected a cutoff by an infeasible inequality */
   int*                  nGen                /**< number of generated cuts */
   )
{
#ifdef SCIP_DEBUG
   char name[SCIP_MAXSTRLEN];
#endif
   SCIP_Real* primsol;
   int nnonviolated = 0;
   int step = 0;
   int nCols;
 
   assert( scip != NULL );
   assert( lp != NULL );
   assert( conss != NULL );
   assert( S != NULL );
   assert( size != NULL );
   assert( value != NULL );
   assert( error != NULL );
   assert( cutoff != NULL );
   assert( nGen != NULL );
 
   *error = FALSE;
   *cutoff = FALSE;
   *nGen = 0;
 
   SCIP_CALL( SCIPlpiGetNCols(lp, &nCols) );
   SCIP_CALL( SCIPallocBufferArray(scip, &primsol, nCols) );
   assert( nconss <= nCols );
 
   do
   {
      SCIP_Bool infeasible;
      SCIP_Real sum = 0.0;
      SCIP_Real candobj = -1.0;
      SCIP_Real candval = 2.0;
      SCIP_Real norm = 1.0;
      int sizeIIS = 0;
      int candidate = -1;
      int candindex = -1;
      int j;
 
      if ( step == 0 )
      {
         /* the first LP is solved without warm start, after that we use a warmstart. */
         SCIP_CALL_PARAM( SCIPlpiSetIntpar(lp, SCIP_LPPAR_FROMSCRATCH, TRUE) );
         SCIP_CALL( checkAltLPInfeasible(scip, lp, conshdlrdata->maxconditionaltlp, TRUE, &infeasible, error) );
         SCIP_CALL_PARAM( SCIPlpiSetIntpar(lp, SCIP_LPPAR_FROMSCRATCH, FALSE) );
      }
      else
         SCIP_CALL( checkAltLPInfeasible(scip, lp, conshdlrdata->maxconditionaltlp, FALSE, &infeasible, error) );
 
      if ( *error )
         break;
 
      /* if the alternative polyhedron is infeasible, we found a cover */
      if ( infeasible )
      {
         /* Note: checking for a primal solution is done in extendToCover(). */
         SCIPdebugMsg(scip, "   size: %4d  produced possible cover with indicator variable objective value %f.\n", *size, *value);
 
         /* we currently cannot call probing if there are cuts in the sepastore; @todo fix this */
         if ( conshdlrdata->trysolfromcover )
         {
            /* Check whether we want to try to construct a feasible solution: there should be no integer/binary variables
             * except the indicator variables. Thus, there should be no integral variables and the number of indicator
             * variables should be at least (actually equal to) the number of binary variables. */
            if ( SCIPgetNIntVars(scip) == 0 && nconss >= SCIPgetNBinVars(scip) )
            {
               SCIP_HEUR* heurindicator;
 
               heurindicator = SCIPfindHeur(scip, "indicator");
               if ( heurindicator == NULL )
               {
                  SCIPerrorMessage("Could not find heuristic \"indicator\".\n");
                  return SCIP_PLUGINNOTFOUND;
               }
 
               SCIP_CALL( SCIPheurPassIndicator(scip, heurindicator, nconss, conss, S, -*value) );
               SCIPdebugMsg(scip, "Passed feasible solution to indicator heuristic.\n");
            }
         }
         break;
      }
 
      /* get solution of alternative LP */
      SCIP_CALL( SCIPlpiGetSol(lp, NULL, primsol, NULL, NULL, NULL) );
 
      /* get value of cut and find candidate for variable to add */
      for (j = 0; j < nconss; ++j)
      {
         SCIP_CONSDATA* consdata;
         int ind;
 
         consdata = SCIPconsGetData(conss[j]);
         assert( consdata != NULL );
         ind = consdata->colindex;
 
         if ( ind >= 0 )
         {
            assert( ind < nCols );
 
            /* check support of the solution, i.e., the corresponding IIS */
            if ( ! SCIPisFeasZero(scip, primsol[ind]) )
            {
               SCIP_Real val;
 
               assert( ! S[j] );
               ++sizeIIS;
               val = SCIPgetSolVal(scip, sol, consdata->binvar);
               sum += val;
 
               /* take element with smallest relaxation value */
               if ( val < candval )
               {
                  candidate = j;
                  candindex = ind;
                  candval = val;
                  candobj = varGetObjDelta(consdata->binvar);
               }
            }
         }
      }
 
      /* check for error */
      if ( candidate < 0 )
      {
         /* Because of numerical problems it might happen that the solution primsol above is zero
          * within the tolerances. In this case we quit. */
         break;
      }
      assert( candidate >= 0 );
      assert( ! S[candidate] );
      assert( sizeIIS > 0 );
 
      /* get the type of norm to use for efficacy calculations */
      switch ( conshdlrdata->normtype )
      {
      case 'e':
         norm = sqrt((SCIP_Real) sizeIIS);
         break;
      case 'm':
         norm = 1.0;
         break;
      case 's':
         norm = (SCIP_Real) sizeIIS;
         break;
      case 'd':
         norm = 1.0;
         break;
      default:
         SCIPerrorMessage("Invalid efficacy norm parameter '%c'.\n", conshdlrdata->normtype);
         SCIPABORT();
         norm = 1.0; /*lint !e527*/
      }
 
      SCIPdebugMsg(scip, "   size: %4d, add var. %4d (obj: %-6g, alt-LP sol: %-8.4f); IIS size: %4d, eff.: %g.\n",
         *size, candidate, candobj, primsol[SCIPconsGetData(conss[candidate])->colindex], sizeIIS, (sum - (SCIP_Real) (sizeIIS - 1))/norm);
 
      /* update new set S */
      S[candidate] = TRUE;
      ++(*size);
      *value += candobj;
 
      /* fix chosen variable to 0 */
      SCIP_CALL( fixAltLPVariable(lp, candindex) );
 
      /* if cut is violated, i.e., sum - sizeIIS + 1 > 0 */
      if ( SCIPisEfficacious(scip, (sum - (SCIP_Real) (sizeIIS - 1))/norm) )
      {
         SCIP_Bool isLocal = FALSE;
 
#ifdef SCIP_ENABLE_IISCHECK
         /* check whether we really have an infeasible subsystem */
         SCIP_CALL( checkIIS(scip, nconss, conss, primsol) );
#endif
 
         /* check whether IIS corresponds to a local cut */
         if (  conshdlrdata->updatebounds )
         {
            SCIP_CALL( checkIISlocal(scip, conshdlrdata, primsol, &isLocal) );
         }
 
         if ( genlogicor )
         {
            SCIP_RESULT result;
            SCIP_CONS* cons;
            SCIP_VAR** vars;
            int cnt = 0;
 
            SCIP_CALL( SCIPallocBufferArray(scip, &vars, nconss) );
 
            /* collect variables corresponding to support to cut */
            for (j = 0; j < nconss; ++j)
            {
               SCIP_CONSDATA* consdata;
               int ind;
 
               consdata = SCIPconsGetData(conss[j]);
               ind = consdata->colindex;
 
               if ( ind >= 0 )
               {
                  assert( ind < nCols );
                  assert( consdata->binvar != NULL );
 
                  /* check support of the solution, i.e., the corresponding IIS */
                  if ( ! SCIPisFeasZero(scip, primsol[ind]) )
                  {
                     SCIP_VAR* var;
                     SCIP_CALL( SCIPgetNegatedVar(scip, consdata->binvar, &var) );
                     vars[cnt++] = var;
                  }
               }
            }
            assert( cnt == sizeIIS );
 
#ifdef SCIP_DEBUG
            (void) SCIPsnprintf(name, SCIP_MAXSTRLEN, "iis%d", conshdlrdata->niiscutsgen + *nGen);
            SCIP_CALL( SCIPcreateConsLogicor(scip, &cons, name, cnt, vars, FALSE, TRUE, TRUE, TRUE, TRUE, isLocal, FALSE, TRUE, removable, FALSE) );
#else
            SCIP_CALL( SCIPcreateConsLogicor(scip, &cons, "", cnt, vars, FALSE, TRUE, TRUE, TRUE, TRUE, isLocal, FALSE, TRUE, removable, FALSE) );
#endif
 
#ifdef SCIP_OUTPUT
            SCIP_CALL( SCIPprintCons(scip, cons, NULL) );
            SCIPinfoMessage(scip, NULL, ";\n");
#endif
 
            /* enforce or separate logicor constraint to make sure that this has an effect in this round */
            switch ( enfosepatype )
            {
            case SCIP_TYPE_ENFOLP:
               SCIP_CALL( SCIPenfolpCons(scip, cons, FALSE, &result) );
               break;
            case SCIP_TYPE_ENFOPS:
               SCIP_CALL( SCIPenfopsCons(scip, cons, FALSE, FALSE, &result) );
               break;
            case SCIP_TYPE_ENFORELAX:
               SCIP_CALL( SCIPenforelaxCons(scip, cons, sol, FALSE, &result) );
               break;
            case SCIP_TYPE_SEPALP:
               SCIP_CALL( SCIPsepalpCons(scip, cons, &result) );
               break;
            case SCIP_TYPE_SEPARELAX:
            case SCIP_TYPE_SEPASOL:
               SCIP_CALL( SCIPsepasolCons(scip, cons, sol, &result) );
               break;
            default:
               SCIPerrorMessage("Wrong enforcing/separation type.\n");
               SCIPABORT();
            }
 
            SCIP_CALL( SCIPaddCons(scip, cons) );
            SCIP_CALL( SCIPreleaseCons(scip, &cons) );
 
            SCIPfreeBufferArray(scip, &vars);
            ++(*nGen);
         }
         else
         {
            SCIP_ROW* row;
 
            /* create row */
#ifdef SCIP_DEBUG
            (void) SCIPsnprintf(name, SCIP_MAXSTRLEN, "iis%d", conshdlrdata->niiscutsgen + *nGen);
            SCIP_CALL( SCIPcreateEmptyRowConshdlr(scip, &row, conshdlr, name, -SCIPinfinity(scip), (SCIP_Real) (sizeIIS - 1), isLocal, FALSE, removable) );
#else
            SCIP_CALL( SCIPcreateEmptyRowConshdlr(scip, &row, conshdlr, "", -SCIPinfinity(scip), (SCIP_Real) (sizeIIS - 1), isLocal, FALSE, removable) );
#endif
            SCIP_CALL( SCIPcacheRowExtensions(scip, row) );
 
            /* add variables corresponding to support to cut */
            for (j = 0; j < nconss; ++j)
            {
               int ind;
               SCIP_CONSDATA* consdata;
 
               consdata = SCIPconsGetData(conss[j]);
               ind = consdata->colindex;
 
               if ( ind >= 0 )
               {
                  assert( ind < nCols );
                  assert( consdata->binvar != NULL );
 
                  /* check support of the solution, i.e., the corresponding IIS */
                  if ( ! SCIPisFeasZero(scip, primsol[ind]) )
                  {
                     SCIP_VAR* var = consdata->binvar;
                     SCIP_CALL( SCIPaddVarToRow(scip, row, var, 1.0) );
                  }
               }
            }
            SCIP_CALL( SCIPflushRowExtensions(scip, row) );
#ifdef SCIP_OUTPUT
            SCIP_CALL( SCIPprintRow(scip, row, NULL) );
#endif
            SCIP_CALL( SCIPaddRow(scip, row, FALSE, cutoff) );
            if ( *cutoff )
            {
               SCIPfreeBufferArray(scip, &primsol);
               return SCIP_OKAY;
            }
 
            /* cut should be violated: */
            assert( SCIPisFeasNegative(scip, SCIPgetRowSolFeasibility(scip, row, sol)) );
 
            /* add cuts to pool if they are globally valid */
            if ( ! isLocal )
               SCIP_CALL( SCIPaddPoolCut(scip, row) );
            SCIP_CALL( SCIPreleaseRow(scip, &row) );
            ++(*nGen);
         }
         nnonviolated = 0;
      }
      else
         ++nnonviolated;
      ++step;
 
      if ( nnonviolated > conshdlrdata->maxsepanonviolated )
      {
         SCIPdebugMsg(scip, "Stop separation after %d non violated IISs.\n", nnonviolated);
         break;
      }
   }
   while (step < nconss);
 
   SCIPfreeBufferArray(scip, &primsol);
 
   return SCIP_OKAY;
}
 
 
/* ---------------------------- constraint handler local methods ----------------------*/
 
/** creates and initializes consdata */
static
SCIP_RETCODE consdataCreate(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_CONSHDLR*        conshdlr,           /**< constraint handler */
   SCIP_CONSHDLRDATA*    conshdlrdata,       /**< constraint handler data */
   const char*           consname,           /**< name of constraint (or NULL) */
   SCIP_CONSDATA**       consdata,           /**< pointer to store constraint data */
   SCIP_EVENTHDLR*       eventhdlrrestart,   /**< event handler for handling restarts */
   SCIP_VAR*             binvar,             /**< binary variable (or NULL) */
   SCIP_Bool             activeone,          /**< whether the constraint is active on 1 or not */
   SCIP_Bool             lessthanineq,       /**< whether the original linear constraint is a less-than-rhs (TRUE) or not */
   SCIP_VAR*             slackvar,           /**< slack variable */
   SCIP_CONS*            lincons,            /**< linear constraint (or NULL) */
   SCIP_Bool             linconsactive       /**< whether the linear constraint is active */
   )
{
   SCIP_VAR* binvarinternal;
 
   assert( scip != NULL );
   assert( conshdlr != NULL );
   assert( conshdlrdata != NULL );
   assert( consdata != NULL );
   assert( slackvar != NULL );
   assert( eventhdlrrestart != NULL );
 
   /* if active on 0, a provided binary variable is negated */
   if ( activeone || binvar == NULL )
      binvarinternal = binvar;
   else
   {
      assert( SCIPvarIsBinary(binvar) );
      SCIP_CALL( SCIPgetNegatedVar(scip, binvar, &binvarinternal) );
   }
 
   /* create constraint data */
   SCIP_CALL( SCIPallocBlockMemory(scip, consdata) );
   (*consdata)->nfixednonzero = 0;
   (*consdata)->colindex = -1;
   (*consdata)->linconsactive = linconsactive;
   (*consdata)->binvar = binvarinternal;
   (*consdata)->slackvar = slackvar;
   (*consdata)->activeone = activeone;
   (*consdata)->lessthanineq = lessthanineq;
   (*consdata)->lincons = lincons;
   (*consdata)->implicationadded = FALSE;
   (*consdata)->slacktypechecked = FALSE;
   (*consdata)->varswithevents = NULL;
   (*consdata)->eventtypes = NULL;
   (*consdata)->nevents = 0;
 
   /* if we are transformed, obtain transformed variables and catch events */
   if ( SCIPisTransformed(scip) )
   {
      SCIP_VAR* var;
 
      /* handle binary variable */
      if ( binvarinternal != NULL )
      {
         SCIP_CALL( SCIPgetTransformedVar(scip, binvarinternal, &var) );
         assert( var != NULL );
         (*consdata)->binvar = var;
 
         /* check type */
         if ( !SCIPvarIsBinary(var) || SCIPvarIsImpliedIntegral(var) )
         {
            SCIPerrorMessage("Indicator variable <%s> is not binary %d.\n", SCIPvarGetName(var), SCIPvarGetType(var));
            return SCIP_ERROR;
         }
 
         /* the indicator variable must not be multi-aggregated because the constraint handler propagation tries
          * to tighten its bounds, which is not allowed for multi-aggregated variables
          */
         SCIP_CALL( SCIPmarkDoNotMultaggrVar(scip, var) );
 
         /* catch global bound change events on binary variable */
         if ( conshdlrdata->forcerestart )
         {
            SCIPdebugMsg(scip, "Catching GBDCHANGED event for <%s>.\n", SCIPvarGetName(var));
            SCIP_CALL( SCIPcatchVarEvent(scip, var, SCIP_EVENTTYPE_GBDCHANGED, eventhdlrrestart, (SCIP_EVENTDATA*) conshdlrdata, NULL) );
         }
 
         /* if binary variable is fixed to be nonzero */
         if ( SCIPvarGetLbLocal(var) > 0.5 )
            ++((*consdata)->nfixednonzero);
      }
 
      /* handle slack variable */
      SCIP_CALL( SCIPgetTransformedVar(scip, slackvar, &var) );
      assert( var != NULL );
      (*consdata)->slackvar = var;
 
      /* catch bound change events on slack variable and adjust nfixednonzero */
      if ( linconsactive )
      {
         /* if slack variable is fixed to be nonzero */
         if ( SCIPisFeasPositive(scip, SCIPvarGetLbLocal(var)) )
            ++((*consdata)->nfixednonzero);
      }
 
      /* add corresponding column to alternative LP if the constraint is new */
      if ( conshdlrdata->sepaalternativelp && SCIPgetStage(scip) >= SCIP_STAGE_INITSOLVE && lincons != NULL )
      {
         assert( lincons != NULL );
         assert( consname != NULL );
 
         SCIP_CALL( addAltLPConstraint(scip, conshdlr, lincons, var, 1.0, &(*consdata)->colindex) );
 
         SCIPdebugMsg(scip, "Added column for <%s> to alternative LP with column index %d.\n", consname, (*consdata)->colindex);
#ifdef SCIP_OUTPUT
         SCIP_CALL( SCIPprintCons(scip, lincons, NULL) );
         SCIPinfoMessage(scip, NULL, ";\n");
#endif
      }
 
#ifdef SCIP_DEBUG
      if ( (*consdata)->nfixednonzero > 0 )
      {
         SCIPdebugMsg(scip, "Constraint <%s> has %d variables fixed to be nonzero.\n", consname, (*consdata)->nfixednonzero);
      }
#endif
   }
 
   return SCIP_OKAY;
}
 
 
/** create variable upper bounds for constraints */
static
SCIP_RETCODE createVarUbs(
   SCIP*                 scip,               /**< SCIP pointer */
   SCIP_CONSHDLRDATA*    conshdlrdata,       /**< constraint handler data */
   SCIP_CONS**           conss,              /**< constraints */
   int                   nconss,             /**< number of constraints */
   int*                  ngen                /**< number of successful operations */
   )
{
   char name[50] = "";
   int c;
 
   assert( scip != NULL );
   assert( conshdlrdata != NULL );
   assert( ngen != NULL );
 
   *ngen = 0;
 
   /* check each constraint */
   for (c = 0; c < nconss; ++c)
   {
      SCIP_CONSDATA* consdata;
      SCIP_Real ub;
 
      consdata = SCIPconsGetData(conss[c]);
      assert( consdata != NULL );
 
      ub = SCIPvarGetUbGlobal(consdata->slackvar);
      assert( ! SCIPisNegative(scip, ub) );
 
      /* insert corresponding row if helpful and coefficient is not too large */
      if ( ub <= conshdlrdata->maxcouplingvalue )
      {
         SCIP_CONS* cons;
 
#ifndef NDEBUG
         (void) SCIPsnprintf(name, 50, "couple%d", c);
#endif
 
         SCIPdebugMsg(scip, "Insert coupling varbound constraint for indicator constraint <%s> (coeff: %f).\n", SCIPconsGetName(conss[c]), ub);
 
         /* add variable upper bound:
          * - check constraint if we remove the indicator constraint afterwards
          * - constraint is dynamic if we do not remove indicator constraints
          * - constraint is removable if we do not remove indicator constraints
          */
         SCIP_CALL( SCIPcreateConsVarbound(scip, &cons, name, consdata->slackvar, consdata->binvar, ub, -SCIPinfinity(scip), ub,
               TRUE, TRUE, TRUE, conshdlrdata->removeindicators, TRUE, FALSE, FALSE,
               !conshdlrdata->removeindicators, !conshdlrdata->removeindicators, FALSE) );
 
         SCIP_CALL( SCIPaddCons(scip, cons) );
         SCIP_CALL( SCIPreleaseCons(scip, &cons) );
 
         /* remove indicator constraint if required */
         if ( conshdlrdata->removeindicators )
         {
            SCIPdebugMsg(scip, "Removing indicator constraint <%s>.\n", SCIPconsGetName(conss[c]));
            assert( ! SCIPconsIsModifiable(conss[c]) );
            SCIP_CALL( SCIPdelCons(scip, conss[c]) );
         }
 
         ++(*ngen);
      }
   }
 
   return SCIP_OKAY;
}
 
 
/** perform one presolving round */
static
SCIP_RETCODE presolRoundIndicator(
   SCIP*                 scip,               /**< SCIP pointer */
   SCIP_CONSHDLRDATA*    conshdlrdata,       /**< constraint handler data */
   SCIP_CONS*            cons,               /**< constraint */
   SCIP_CONSDATA*        consdata,           /**< constraint data */
   SCIP_Bool             dualreductions,     /**< should dual reductions be performed? */
   SCIP_Bool*            cutoff,             /**< whether a cutoff happened */
   SCIP_Bool*            success,            /**< whether we performed a successful reduction */
   int*                  ndelconss,          /**< pointer to store the number of deleted constraints */
   int*                  nfixedvars          /**< pointer to store the number of fixed variables */
   )
{
   SCIP_Bool infeasible;
   SCIP_Bool fixed;
 
   assert( scip != NULL );
   assert( cons != NULL );
   assert( consdata != NULL );
   assert( cutoff != NULL );
   assert( success != NULL );
   assert( ndelconss != NULL );
   assert( nfixedvars != NULL );
   assert( consdata->binvar != NULL );
   assert( consdata->slackvar != NULL );
 
   *cutoff = FALSE;
   *success = FALSE;
 
   /* if the binary variable is fixed to nonzero */
   if ( SCIPvarGetLbLocal(consdata->binvar) > 0.5 )
   {
      SCIPdebugMsg(scip, "Presolving <%s>: Binary variable fixed to 1.\n", SCIPconsGetName(cons));
 
      /* if slack variable is fixed to nonzero, we are infeasible */
      if ( SCIPisFeasPositive(scip, SCIPvarGetLbLocal(consdata->slackvar)) )
      {
         SCIPdebugMsg(scip, "The problem is infeasible: binary and slack variable are fixed to be nonzero.\n");
         *cutoff = TRUE;
         return SCIP_OKAY;
      }
 
      /* otherwise fix slack variable to 0 */
      SCIPdebugMsg(scip, "Fix slack variable to 0 and delete constraint.\n");
      SCIP_CALL( SCIPfixVar(scip, consdata->slackvar, 0.0, &infeasible, &fixed) );
      assert( ! infeasible );
      if ( fixed )
         ++(*nfixedvars);
 
      /* delete indicator constraint (leave linear constraint) */
      assert( ! SCIPconsIsModifiable(cons) );
      SCIP_CALL( SCIPdelCons(scip, cons) );
      ++(*ndelconss);
      *success = TRUE;
      return SCIP_OKAY;
   }
 
   /* if the binary variable is fixed to zero */
   if ( SCIPvarGetUbLocal(consdata->binvar) < 0.5 )
   {
      SCIPdebugMsg(scip, "Presolving <%s>: Binary variable <%s> fixed to 0, deleting indicator constraint.\n", SCIPconsGetName(cons), SCIPvarGetName(consdata->binvar));
 
      /* delete indicator constraint */
      assert( ! SCIPconsIsModifiable(cons) );
      SCIP_CALL( SCIPdelCons(scip, cons) );
      ++(*ndelconss);
      *success = TRUE;
      return SCIP_OKAY;
   }
 
   /* if the slack variable is fixed to nonzero */
   if ( SCIPisFeasPositive(scip, SCIPvarGetLbLocal(consdata->slackvar)) )
   {
      SCIPdebugMsg(scip, "Presolving <%s>: Slack variable fixed to nonzero.\n", SCIPconsGetName(cons));
 
      /* if binary variable is fixed to nonzero, we are infeasible */
      if ( SCIPvarGetLbLocal(consdata->binvar) > 0.5 )
      {
         SCIPdebugMsg(scip, "The problem is infeasible: binary and slack variable are fixed to be nonzero.\n");
         *cutoff = TRUE;
         return SCIP_OKAY;
      }
 
      /* otherwise fix binary variable to 0 */
      SCIPdebugMsg(scip, "Fix binary variable to 0 and delete indicator constraint.\n");
      SCIP_CALL( SCIPfixVar(scip, consdata->binvar, 0.0, &infeasible, &fixed) );
      assert( ! infeasible );
      if ( fixed )
         ++(*nfixedvars);
 
      /* delete constraint */
      assert( ! SCIPconsIsModifiable(cons) );
      SCIP_CALL( SCIPdelCons(scip, cons) );
      ++(*ndelconss);
      *success = TRUE;
      return SCIP_OKAY;
   }
 
   /* if the slack variable is fixed to zero */
   if ( SCIPisFeasZero(scip, SCIPvarGetUbLocal(consdata->slackvar)) )
   {
      /* perform dual reductions - if required */
      if ( dualreductions )
      {
         SCIP_VAR* binvar;
         SCIP_Real obj;
 
         /* check objective of binary variable */
         binvar = consdata->binvar;
         obj = varGetObjDelta(binvar);
 
         /* if obj = 0, we prefer fixing the binary variable to 1 (if possible) */
         if ( obj <= 0.0 )
         {
            /* In this case we would like to fix the binary variable to 1, if it is not locked up
             * except by this indicator constraint. If more than one indicator constraint is
             * affected, we have to hope that they are all fulfilled - in this case the last
             * constraint will fix the binary variable to 1. */
            if ( SCIPvarGetNLocksUpType(binvar, SCIP_LOCKTYPE_MODEL) <= 1 )
            {
               if ( SCIPvarGetUbGlobal(binvar) > 0.5 )
               {
                  SCIPdebugMsg(scip, "Presolving <%s> - dual reduction: Slack variable fixed to 0, fix binary variable to 1.\n", SCIPconsGetName(cons));
                  SCIP_CALL( SCIPfixVar(scip, binvar, 1.0, &infeasible, &fixed) );
                  assert( ! infeasible );
                  if ( fixed )
                     ++(*nfixedvars);
                  /* make sure that the other case does not occur */
                  obj = -1.0;
               }
            }
         }
 
         if ( obj >= 0.0 )
         {
            /* In this case we would like to fix the binary variable to 0, if it is not locked down
             * (should also have been performed by other dual reductions). */
            if ( SCIPvarGetNLocksDownType(binvar, SCIP_LOCKTYPE_MODEL) == 0 )
            {
               if ( SCIPvarGetLbGlobal(binvar) < 0.5 )
               {
                  SCIPdebugMsg(scip, "Presolving <%s> - dual reduction: Slack variable fixed to 0, fix binary variable to 0.\n", SCIPconsGetName(cons));
                  SCIP_CALL( SCIPfixVar(scip, binvar, 0.0, &infeasible, &fixed) );
                  assert( ! infeasible );
                  if ( fixed )
                     ++(*nfixedvars);
               }
            }
         }
      }
 
      SCIPdebugMsg(scip, "Presolving <%s>: Slack variable fixed to zero, delete redundant indicator constraint.\n", SCIPconsGetName(cons));
 
      /* delete constraint */
      assert( ! SCIPconsIsModifiable(cons) );
      SCIP_CALL( SCIPdelCons(scip, cons) );
      ++(*ndelconss);
      *success = TRUE;
      return SCIP_OKAY;
   }
 
   /* check whether indicator variable is aggregated  */
   if ( SCIPvarGetStatus(consdata->binvar) == SCIP_VARSTATUS_AGGREGATED )
   {
      SCIP_Bool negated = FALSE;
      SCIP_VAR* var;
 
      /* possibly get representation of indicator variable by active variable */
      var = consdata->binvar;
      SCIP_CALL( SCIPvarGetProbvarBinary(&var, &negated) );
      assert( var == consdata->binvar || SCIPvarIsActive(var) || SCIPvarIsNegated(var) );
 
      /* we can replace the binary variable by the active variable if it is not negated */
      if ( var != consdata->binvar && ! negated )
      {
         SCIPdebugMsg(scip, "Indicator variable <%s> is aggregated and replaced by active/negated variable <%s>.\n", SCIPvarGetName(consdata->binvar), SCIPvarGetName(var) );
 
         /* we need to update the events and locks */
         assert( conshdlrdata->eventhdlrbound != NULL );
         SCIP_CALL( SCIPdropVarEvent(scip, consdata->binvar, SCIP_EVENTTYPE_BOUNDCHANGED, conshdlrdata->eventhdlrbound, (SCIP_EVENTDATA*) cons, -1) );
         SCIP_CALL( SCIPcatchVarEvent(scip, var, SCIP_EVENTTYPE_BOUNDCHANGED, conshdlrdata->eventhdlrbound, (SCIP_EVENTDATA*) cons, NULL) );
 
         /* We also need to update the events and locks if restart is forced, since global bound change events on binary
          * variables are also caught in this case. If it would not be updated and forcerestart = TRUE, then an event
          * might be dropped on a wrong variable. */
         if ( conshdlrdata->forcerestart )
         {
            assert( conshdlrdata->eventhdlrrestart != NULL );
            SCIP_CALL( SCIPdropVarEvent(scip, consdata->binvar, SCIP_EVENTTYPE_GBDCHANGED,
                  conshdlrdata->eventhdlrrestart, (SCIP_EVENTDATA*) conshdlrdata, -1) );
            SCIP_CALL( SCIPcatchVarEvent(scip, var, SCIP_EVENTTYPE_GBDCHANGED, conshdlrdata->eventhdlrrestart,
                  (SCIP_EVENTDATA*) conshdlrdata, NULL) );
         }
 
         SCIP_CALL( SCIPaddVarLocksType(scip, consdata->binvar, SCIP_LOCKTYPE_MODEL, 0, -1) );
         SCIP_CALL( SCIPaddVarLocksType(scip, var, SCIP_LOCKTYPE_MODEL, 0, 1) );
 
         /* change binary variable */
         SCIP_CALL( SCIPcaptureVar(scip, var) );
         SCIP_CALL( SCIPreleaseVar(scip, &consdata->binvar) );
         consdata->binvar = var;
      }
   }
   else if ( SCIPvarGetStatus(consdata->binvar) == SCIP_VARSTATUS_NEGATED )
   {
      SCIP_VAR* var;
 
      var = SCIPvarGetNegatedVar(consdata->binvar);
      assert( var != NULL );
 
      /* if the binary variable is the negated slack variable, we have 1 - s = 1 -> s = 0, i.e., the constraint is redundant */
      if ( var == consdata->slackvar )
      {
         /* delete constraint */
         assert( ! SCIPconsIsModifiable(cons) );
         SCIP_CALL( SCIPdelCons(scip, cons) );
         ++(*ndelconss);
         *success = TRUE;
         return SCIP_OKAY;
      }
   }
 
   /* check whether slack variable is aggregated  */
   if ( SCIPvarGetStatus(consdata->slackvar) == SCIP_VARSTATUS_AGGREGATED || SCIPvarGetStatus(consdata->slackvar) == SCIP_VARSTATUS_NEGATED )
   {
      SCIP_BOUNDTYPE boundtype = SCIP_BOUNDTYPE_LOWER;
      SCIP_Real bound;
      SCIP_VAR* var;
 
      /* possibly get representation of slack variable by active variable */
      var = consdata->slackvar;
      bound = SCIPvarGetLbGlobal(var);
 
      SCIP_CALL( SCIPvarGetProbvarBound(&var, &bound, &boundtype) );
      assert( var != consdata->slackvar );
 
      /* we can replace the slack variable by the active variable if it is also a >= variable */
      if ( var != consdata->binvar && boundtype == SCIP_BOUNDTYPE_LOWER && SCIPisEQ(scip, bound, 0.0) )
      {
         assert( SCIPvarIsActive(var) );
         SCIPdebugMsg(scip, "Slack variable <%s> is aggregated or negated and replaced by active variable <%s>.\n", SCIPvarGetName(consdata->slackvar), SCIPvarGetName(var) );
 
         /* we need to update the events, locks, and captures */
         assert( conshdlrdata->eventhdlrbound != NULL );
         SCIP_CALL( SCIPdropVarEvent(scip, consdata->slackvar, SCIP_EVENTTYPE_BOUNDCHANGED, conshdlrdata->eventhdlrbound, (SCIP_EVENTDATA*) cons, -1) );
         SCIP_CALL( SCIPcatchVarEvent(scip, var, SCIP_EVENTTYPE_BOUNDCHANGED, conshdlrdata->eventhdlrbound, (SCIP_EVENTDATA*) cons, NULL) );
 
         SCIP_CALL( SCIPunlockVarCons(scip, consdata->slackvar, cons, FALSE, TRUE) );
         SCIP_CALL( SCIPlockVarCons(scip, var, cons, FALSE, TRUE) );
 
         SCIP_CALL( SCIPreleaseVar(scip, &consdata->slackvar) );
         SCIP_CALL( SCIPcaptureVar(scip, var) );
 
         /* change slack variable */
         consdata->slackvar = var;
      }
      else if ( var == consdata->binvar )
      {
         /* check special case that aggregating variable is equal to the indicator variable */
         assert( SCIPisEQ(scip, bound, 0.0) || SCIPisEQ(scip, bound, 1.0) );
 
         /* if the lower bound is transformed to an upper bound, we have "y = 1 -> 1 - y = 0", i.e., the constraint is redundant */
         if ( boundtype == SCIP_BOUNDTYPE_UPPER )
         {
            SCIPdebugMsg(scip, "Slack variable <%s> is aggregated to negated indicator variable <%s> -> constraint redundant.\n",
               SCIPvarGetName(consdata->slackvar), SCIPvarGetName(consdata->binvar));
            assert( SCIPisEQ(scip, bound, 1.0) );
 
            /* delete constraint */
            assert( ! SCIPconsIsModifiable(cons) );
            SCIP_CALL( SCIPdelCons(scip, cons) );
            ++(*ndelconss);
            *success = TRUE;
            return SCIP_OKAY;
         }
         else
         {
            /* if the lower bound is transformed to a lower bound, we have "y = 1 -> y = 0", i.e., we can fix the binary variable to 0 */
            SCIPdebugMsg(scip, "Slack variable <%s> is aggregated to the indicator variable <%s> -> fix indicator variable to 0.\n",
               SCIPvarGetName(consdata->slackvar), SCIPvarGetName(consdata->binvar));
            assert( boundtype == SCIP_BOUNDTYPE_LOWER );
            assert( SCIPisEQ(scip, bound, 0.0) );
 
            SCIP_CALL( SCIPfixVar(scip, consdata->binvar, 0.0, &infeasible, &fixed) );
            assert( ! infeasible );
 
            if ( fixed )
               ++(*nfixedvars);
 
            SCIP_CALL( SCIPdelCons(scip, cons) );
 
            ++(*ndelconss);
            *success = TRUE;
 
            return SCIP_OKAY;
         }
      }
   }
 
   /* Note that because of possible multi-aggregation we cannot simply remove the indicator
    * constraint if the linear constraint is not active or disabled - see the note in @ref
    * PREPROC. */
 
   return SCIP_OKAY;
}
 
 
/** propagate indicator constraint */
static
SCIP_RETCODE propIndicator(
   SCIP*                 scip,               /**< SCIP pointer */
   SCIP_CONS*            cons,               /**< constraint */
   SCIP_CONSDATA*        consdata,           /**< constraint data */
   SCIP_CONSHDLRDATA*    conshdlrdata,       /**< constraint handler data */
   SCIP_Bool             dualreductions,     /**< should dual reductions be performed? */
   SCIP_Bool             addopposite,        /**< add opposite inequalities if binary var = 0? */
   SCIP_Bool*            cutoff,             /**< whether a cutoff happened */
   int*                  nGen                /**< number of domain changes */
   )
{
   SCIP_Bool infeasible;
   SCIP_Bool tightened;
 
   assert( scip != NULL );
   assert( cons != NULL );
   assert( consdata != NULL );
   assert( cutoff != NULL );
   assert( nGen != NULL );
 
   *cutoff = FALSE;
   *nGen = 0;
 
   /* if the linear constraint has not been generated, we do nothing */
   if ( ! consdata->linconsactive )
      return SCIP_OKAY;
 
   assert( consdata->slackvar != NULL );
   assert( consdata->binvar != NULL );
   assert( SCIPisFeasGE(scip, SCIPvarGetLbLocal(consdata->slackvar), 0.0) );
 
   /* increase age of constraint; age will be reset to zero, if a conflict or a propagation was found */
   if ( ! SCIPinRepropagation(scip) )
   {
      SCIP_CALL( SCIPincConsAge(scip, cons) );
   }
 
   /* if both slackvar and binvar are fixed to be nonzero */
   if ( consdata->nfixednonzero > 1 )
   {
      SCIPdebugMsg(scip, "The node is infeasible, both the slack variable and the binary variable are fixed to be nonzero.\n");
      *cutoff = TRUE;
 
      SCIP_CALL( SCIPresetConsAge(scip, cons) );
      assert( SCIPvarGetLbLocal(consdata->binvar) > 0.5 );
      assert( SCIPisPositive(scip, SCIPvarGetLbLocal(consdata->slackvar)) );
 
      /* check if conflict analysis is turned on */
      if ( ! SCIPisConflictAnalysisApplicable(scip) )
         return SCIP_OKAY;
 
      /* conflict analysis can only be applied in solving stage */
      assert( SCIPgetStage(scip) == SCIP_STAGE_SOLVING || SCIPinProbing(scip) );
 
      /* perform conflict analysis */
      SCIP_CALL( SCIPinitConflictAnalysis(scip, SCIP_CONFTYPE_PROPAGATION, FALSE) );
 
      SCIP_CALL( SCIPaddConflictBinvar(scip, consdata->binvar) );
      SCIP_CALL( SCIPaddConflictLb(scip, consdata->slackvar, NULL) );
      SCIP_CALL( SCIPanalyzeConflictCons(scip, cons, NULL) );
 
      return SCIP_OKAY;
   }
 
   /* if exactly one of the variables is fixed to be nonzero */
   if ( consdata->nfixednonzero == 1 )
   {
      /* if binvar is fixed to be nonzero */
      if ( SCIPvarGetLbLocal(consdata->binvar) > 0.5 )
      {
         assert( SCIPvarGetStatus(consdata->slackvar) != SCIP_VARSTATUS_MULTAGGR );
 
         /* if slack variable is not already fixed to 0 */
         if ( ! SCIPisZero(scip, SCIPvarGetUbLocal(consdata->slackvar)) )
         {
            SCIPdebugMsg(scip, "Binary variable <%s> is fixed to be nonzero, fixing slack variable <%s> to 0.\n",
               SCIPvarGetName(consdata->binvar), SCIPvarGetName(consdata->slackvar));
 
            /* fix slack variable to 0 */
            SCIP_CALL( SCIPinferVarUbCons(scip, consdata->slackvar, 0.0, cons, 0, FALSE, &infeasible, &tightened) );
            assert( ! infeasible );
            if ( tightened )
               ++(*nGen);
         }
      }
 
      /* if slackvar is fixed to be nonzero */
      if ( SCIPisFeasPositive(scip, SCIPvarGetLbLocal(consdata->slackvar)) )
      {
         /* if binary variable is not yet fixed to 0 */
         if ( SCIPvarGetUbLocal(consdata->binvar) > 0.5 )
         {
            SCIPdebugMsg(scip, "Slack variable <%s> is fixed to be nonzero, fixing binary variable <%s> to 0.\n",
               SCIPvarGetName(consdata->slackvar), SCIPvarGetName(consdata->binvar));
 
            /* fix binary variable to 0 */
            SCIP_CALL( SCIPinferVarUbCons(scip, consdata->binvar, 0.0, cons, 1, FALSE, &infeasible, &tightened) );
            assert( ! infeasible );
            if ( tightened )
               ++(*nGen);
         }
      }
 
      /* remove constraint if we are not in probing */
      if ( ! SCIPinProbing(scip) )
      {
         /* delete constraint locally */
         assert( ! SCIPconsIsModifiable(cons) );
         SCIP_CALL( SCIPdelConsLocal(scip, cons) );
      }
   }
   else
   {
      /* if the binary variable is fixed to zero */
      if ( SCIPvarGetUbLocal(consdata->binvar) < 0.5 )
      {
         if ( addopposite && consdata->linconsactive )
         {
            char name[SCIP_MAXSTRLEN];
            SCIP_CONS* reversecons;
            SCIP_VAR** linvars;
            SCIP_Real* linvals;
            SCIP_Bool allintegral = TRUE;
            SCIP_VAR* slackvar;
            SCIP_VAR** vars;
            SCIP_Real* vals;
            SCIP_Real lhs;
            SCIP_Real rhs;
            int nlinvars;
            int nvars = 0;
            int j;
 
            /* determine lhs/rhs (first exchange lhs/rhs) */
            lhs = SCIPgetRhsLinear(scip, consdata->lincons);
            if ( SCIPisInfinity(scip, lhs) )
               lhs = -SCIPinfinity(scip);
            rhs = SCIPgetLhsLinear(scip, consdata->lincons);
            if ( SCIPisInfinity(scip, -rhs) )
               rhs = SCIPinfinity(scip);
 
            assert( ! SCIPisInfinity(scip, lhs) );
            assert( ! SCIPisInfinity(scip, -rhs) );
 
            /* consider only finite lhs/rhs */
            if ( ! SCIPisInfinity(scip, -lhs) || ! SCIPisInfinity(scip, rhs) )
            {
               /* ignore equations (cannot add opposite constraint) */
               if ( ! SCIPisEQ(scip, lhs, rhs) )
               {
                  assert( consdata->lincons != NULL );
                  nlinvars = SCIPgetNVarsLinear(scip, consdata->lincons);
                  linvars = SCIPgetVarsLinear(scip, consdata->lincons);
                  linvals = SCIPgetValsLinear(scip, consdata->lincons);
                  slackvar = consdata->slackvar;
                  assert( slackvar != NULL );
 
                  SCIP_CALL( SCIPallocBufferArray(scip, &vars, nlinvars) );
                  SCIP_CALL( SCIPallocBufferArray(scip, &vals, nlinvars) );
 
                  /* copy data and check whether the linear constraint is integral */
                  for (j = 0; j < nlinvars; ++j)
                  {
                     if ( linvars[j] != slackvar )
                     {
                        if (! SCIPvarIsIntegral(linvars[j]) || ! SCIPisIntegral(scip, linvals[j]) )
                           allintegral = FALSE;
 
                        vars[nvars] = linvars[j];
                        vals[nvars++] = linvals[j];
                     }
                  }
                  assert( nlinvars == nvars + 1 );
 
                  /* possibly adjust lhs/rhs */
                  if ( allintegral && ! SCIPisInfinity(scip, REALABS(lhs)) )
                     lhs += 1.0;
 
                  if ( allintegral && ! SCIPisInfinity(scip, REALABS(rhs)) )
                     rhs -= 1.0;
 
                  /* create reverse constraint */
                  (void) SCIPsnprintf(name, SCIP_MAXSTRLEN, "reverse_%s", SCIPconsGetName(consdata->lincons));
 
                  /* constraint is initial, separated, not enforced, not checked, propagated, local, not modifiable, dynamic, removable */
                  SCIP_CALL( SCIPcreateConsLinear(scip, &reversecons, name, nvars, vars, vals, lhs, rhs,
                        TRUE, TRUE, FALSE, FALSE, TRUE, TRUE, FALSE, TRUE, TRUE, FALSE) );
 
                  SCIPdebugMsg(scip, "Binary variable <%s> fixed to 0. Adding opposite linear inequality.\n", SCIPvarGetName(consdata->binvar));
                  SCIPdebugPrintCons(scip, reversecons, NULL);
 
                  /* add constraint */
                  SCIP_CALL( SCIPaddCons(scip, reversecons) );
                  SCIP_CALL( SCIPreleaseCons(scip, &reversecons) );
 
                  SCIPfreeBufferArray(scip, &vals);
                  SCIPfreeBufferArray(scip, &vars);
               }
            }
         }
 
         /* remove constraint if we are not in probing */
         if ( ! SCIPinProbing(scip) )
         {
            /* delete constraint locally */
            assert( ! SCIPconsIsModifiable(cons) );
            SCIP_CALL( SCIPdelConsLocal(scip, cons) );
         }
      }
      /* if the slack variable is fixed to zero */
      else if ( SCIPisFeasZero(scip, SCIPvarGetUbLocal(consdata->slackvar)) )
      {
         /* perform dual reduction - if required */
         if ( dualreductions )
         {
            SCIP_VAR* binvar;
            SCIP_Real obj;
 
            /* check objective of binary variable */
            binvar = consdata->binvar;
            obj = varGetObjDelta(binvar);
 
            /* if obj = 0, we prefer setting the binary variable to 1 (if possible) */
            if ( obj <= 0.0 )
            {
               /* In this case we would like to fix the binary variable to 1, if it is not locked up
                * except by this indicator constraint. If more than one indicator constraint is
                * affected, we have to hope that they are all fulfilled - in this case the last
                * constraint will fix the binary variable to 1. */
               if ( SCIPvarGetNLocksUpType(binvar, SCIP_LOCKTYPE_MODEL) <= 1 )
               {
                  if ( SCIPvarGetUbLocal(binvar) > 0.5 )
                  {
                     SCIPdebugMsg(scip, "Propagating <%s> - dual reduction: Slack variable fixed to 0, fix binary variable to 1.\n", SCIPconsGetName(cons));
                     SCIP_CALL( SCIPinferVarLbCons(scip, binvar, 1.0, cons, 2, FALSE, &infeasible, &tightened) );
                     assert( ! infeasible );
                     if ( tightened )
                        ++(*nGen);
                     /* Make sure that the other case does not occur, since we are not sure whether SCIPinferVarLbCons() directly changes the bounds. */
                     obj = -1.0;
                  }
               }
            }
 
            if ( obj >= 0.0 )
            {
               /* In this case we would like to fix the binary variable to 0, if it is not locked down
                * (should also have been performed by other dual reductions). */
               if ( SCIPvarGetNLocksDownType(binvar, SCIP_LOCKTYPE_MODEL) == 0 )
               {
                  if ( SCIPvarGetLbLocal(binvar) < 0.5 )
                  {
                     SCIPdebugMsg(scip, "Propagating <%s> - dual reduction: Slack variable fixed to 0, fix binary variable to 0.\n", SCIPconsGetName(cons));
                     SCIP_CALL( SCIPinferVarUbCons(scip, binvar, 0.0, cons, 2, FALSE, &infeasible, &tightened) );
                     assert( ! infeasible );
                     if ( tightened )
                        ++(*nGen);
                  }
               }
            }
         }
 
         SCIPdebugMsg(scip, "Slack variable fixed to zero, delete redundant indicator constraint <%s>.\n", SCIPconsGetName(cons));
 
         /* delete constraint */
         assert( ! SCIPconsIsModifiable(cons) );
 
         /* remove constraint if we are not in probing */
         if ( ! SCIPinProbing(scip) )
         {
            SCIP_CALL( SCIPdelConsLocal(scip, cons) );
         }
      }
 
      /* Note that because of possible multi-aggregation we cannot simply remove the indicator
       * constraint if the linear constraint is not active or disabled - see the note in @ref
       * PREPROC and consPresolIndicator(). Moreover, it would drastically increase memory
       * consumption, because the linear constraints have to be stored in each node. */
   }
 
   /* propagate maximal activity of linear constraint to upper bound of slack variable
    *
    * It is especially worth to tighten the upper bound if it is greater than maxcouplingvalue or sepacouplingvalue.
    * But do not tighten it if slackvar is locked down by other constraints,
    * or if it has a nonzero coefficient in the objective function.
    *
    * ax - c * s <= rhs  ->  s <= (maxActivity(ax) - rhs) / c;
    */
   if ( (SCIPvarGetUbLocal(consdata->slackvar) > conshdlrdata->maxcouplingvalue
         || SCIPvarGetUbLocal(consdata->slackvar) > conshdlrdata->sepacouplingvalue)
      && SCIPvarGetNLocksDownType(consdata->slackvar, SCIP_LOCKTYPE_MODEL) <= 1
      && SCIPvarGetObj(consdata->slackvar) == 0.0 && SCIPconsIsActive(consdata->lincons) )
   {
      SCIP_VAR** linconsvars;
      SCIP_Real* linconsvals;
      SCIP_Real maxactivity = 0.0;
      SCIP_Real coeffslack = SCIP_INVALID;   /* -c */
      SCIP_Real newub;
      SCIP_Real rhs;
      int nlinconsvars;
      int j;
 
      nlinconsvars = SCIPgetNVarsLinear(scip, consdata->lincons);
      linconsvars = SCIPgetVarsLinear(scip, consdata->lincons);
      linconsvals = SCIPgetValsLinear(scip, consdata->lincons);
 
      /* calculate maximal activity of linear constraint without slackvar */
      for (j = 0; j < nlinconsvars; ++j)
      {
         SCIP_VAR* var;
         SCIP_Real val;
         SCIP_Real bound;
 
         val = linconsvals[j];
         assert( ! SCIPisZero(scip, val) );
 
         var = linconsvars[j];
         assert( var != NULL );
 
         /* store slackvar coefficient */
         if ( var == consdata->slackvar )
         {
            coeffslack = val;
            continue;
         }
 
         if ( val > 0.0 )
            bound = SCIPvarGetUbLocal(var);
         else
            bound = SCIPvarGetLbLocal(var);
 
         if ( SCIPisInfinity(scip, REALABS(bound)) )
         {
            maxactivity = SCIPinfinity(scip);
            break;
         }
         else
            maxactivity += val * bound;
      }
 
      /* continue only if maxactivity is not infinity */
      if ( !SCIPisInfinity(scip, maxactivity) && coeffslack != SCIP_INVALID && coeffslack < 0.0 )  /*lint !e777*/
      {
         rhs = SCIPgetRhsLinear(scip, consdata->lincons);
 
         /* continue if rhs is not finite; happens, e.g., if variables are multiaggregated; we would need the minimal activity in this case */
         if ( !SCIPisInfinity(scip, rhs) )
         {
            /* divide by coeff of slackvar */
            newub = (maxactivity - rhs) / (-1.0 * coeffslack);
            assert( !SCIPisInfinity(scip, newub) );
 
            /* adjust bound if slackvar is (implicit) integer */
            newub = SCIPadjustedVarUb(scip, consdata->slackvar, newub);
 
            if ( SCIPisFeasLT(scip, newub, SCIPvarGetUbLocal(consdata->slackvar))
               && newub > SCIPvarGetLbLocal(consdata->slackvar) )
            {
               SCIPdebugMsg(scip, "Adjusting upper bound of slack variable <%s> to %g for indicator constraint <%s>.\n",
                  SCIPvarGetName(consdata->slackvar), newub, SCIPconsGetName(cons));
 
               /* propagate bound */
               SCIP_CALL( SCIPinferVarUbCons(scip, consdata->slackvar, newub, cons, 3, FALSE, &infeasible, &tightened) );
               assert( !infeasible );
               if ( tightened )
                  ++(*nGen);
            }
         }
      }
   }
 
   /* reset constraint age counter */
   if ( *nGen > 0 )
   {
      SCIP_CALL( SCIPresetConsAge(scip, cons) );
   }
 
   return SCIP_OKAY;
}
 
 
/** enforcement method that produces cuts if possible
 *
 *  This is a variant of the enforcement method that generates cuts/constraints via the alternative
 *  LP, if possible.
 */
static
SCIP_RETCODE enforceCuts(
   SCIP*                 scip,               /**< SCIP pointer */
   SCIP_CONSHDLR*        conshdlr,           /**< constraint handler */
   int                   nconss,             /**< number of constraints */
   SCIP_CONS**           conss,              /**< indicator constraints */
   SCIP_SOL*             sol,                /**< solution to be enforced */
   SCIP_ENFOSEPATYPE     enfosepatype,       /**< type of enforcing/separating type */
   SCIP_Bool             genlogicor,         /**< whether logicor constraint should be generated */
   SCIP_Bool*            cutoff,             /**< whether we detected a cutoff by an infeasible inequality */
   int*                  nGen                /**< number of cuts generated */
   )
{
   SCIP_CONSHDLRDATA* conshdlrdata;
   SCIP_LPI* lp;
   SCIP_Bool* S;
   SCIP_Real value = 0.0;
   SCIP_Bool error;
   int size = 0;
   int nCuts;
   int j;
 
   assert( scip != NULL );
   assert( conshdlr != NULL );
   assert( conss != NULL );
   assert( cutoff != NULL );
   assert( nGen != NULL );
 
   SCIPdebugMsg(scip, "Enforcing via cuts ...\n");
   *cutoff = FALSE;
   *nGen = 0;
 
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
   lp = conshdlrdata->altlp;
   assert( lp != NULL );
 
#ifndef NDEBUG
   SCIP_CALL( checkLPBoundsClean(scip, lp, nconss, conss) );
#endif
 
   /* change coefficients of bounds in alternative LP */
   if ( conshdlrdata->updatebounds )
      SCIP_CALL( updateFirstRowGlobal(scip, conshdlrdata) );
 
   /* possibly update upper bound */
   SCIP_CALL( updateObjUpperbound(scip, conshdlr, conshdlrdata) );
 
   /* scale first row if necessary */
   SCIP_CALL( scaleFirstRow(scip, conshdlrdata) );
 
   /* set objective function to current solution */
   SCIP_CALL( setAltLPObjZero(scip, lp, nconss, conss) );
 
   SCIP_CALL( SCIPallocBufferArray(scip, &S, nconss) );
 
   /* set up variables fixed to 1 */
   for (j = 0; j < nconss; ++j)
   {
      SCIP_CONSDATA* consdata;
 
      assert( conss[j] != NULL );
      consdata = SCIPconsGetData(conss[j]);
      assert( consdata != NULL );
 
      assert( SCIPisFeasIntegral(scip, SCIPgetSolVal(scip, sol, consdata->binvar)) );
      if ( SCIPisFeasZero(scip, SCIPgetSolVal(scip, sol, consdata->binvar)) )
      {
         ++size;
         value += varGetObjDelta(consdata->binvar);
         S[j] = TRUE;
      }
      else
         S[j] = FALSE;
   }
 
   /* fix the variables in S */
   SCIP_CALL( fixAltLPVariables(scip, lp, nconss, conss, S) );
 
   /* extend set S to a cover and generate cuts */
   error = FALSE;
   SCIP_CALL( extendToCover(scip, conshdlr, conshdlrdata, lp, sol, enfosepatype, conshdlrdata->removable, genlogicor, nconss, conss, S, &size, &value, &error, cutoff, &nCuts) );
   *nGen = nCuts;
 
   /* return with an error if no cuts have been produced and and error occurred in extendToCover() */
   if ( nCuts == 0 && error )
      return SCIP_LPERROR;
 
   SCIPdebugMsg(scip, "Generated %d IIS-cuts.\n", nCuts);
 
   /* reset bounds */
   SCIP_CALL( unfixAltLPVariables(scip, lp, nconss, conss, S) );
 
#ifndef NDEBUG
   SCIP_CALL( checkLPBoundsClean(scip, lp, nconss, conss) );
#endif
 
   SCIPfreeBufferArray(scip, &S);
 
   return SCIP_OKAY;
}
 
 
/** enforcement method
 *
 *  We check whether the current solution is feasible, i.e., if binvar = 1
 *  implies that slackvar = 0. If not, we branch as follows:
 *
 *  In one branch we fix binvar = 1 and slackvar = 0. In the other branch
 *  we fix binvar = 0 and leave slackvar unchanged.
 */
static
SCIP_RETCODE enforceIndicators(
   SCIP*                 scip,               /**< SCIP pointer */
   SCIP_CONSHDLR*        conshdlr,           /**< constraint handler */
   int                   nconss,             /**< number of constraints */
   SCIP_CONS**           conss,              /**< indicator constraints */
   SCIP_SOL*             sol,                /**< solution to be enforced (NULL for LP solution) */
   SCIP_ENFOSEPATYPE     enfosepatype,       /**< type of enforcing/separating type */
   SCIP_Bool             genlogicor,         /**< whether logicor constraint should be generated */
   SCIP_RESULT*          result              /**< result */
   )
{
   SCIP_CONSHDLRDATA* conshdlrdata;
   SCIP_CONSDATA* consdata;
   SCIP_NODE* node1;
   SCIP_NODE* node2;
   SCIP_VAR* slackvar;
   SCIP_VAR* binvar;
   SCIP_CONS* branchCons = NULL;
   SCIP_Real maxSlack = -1.0;
   SCIP_Bool someLinconsNotActive = FALSE;
   SCIP_Bool dualreductions;
   int c;
 
   assert( scip != NULL );
   assert( conshdlr != NULL );
   assert( conss != NULL );
   assert( result != NULL );
 
   *result = SCIP_FEASIBLE;
 
   SCIPdebugMsg(scip, "Enforcing indicator constraints for <%s> ...\n", SCIPconshdlrGetName(conshdlr) );
 
   /* get constraint handler data */
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
 
   dualreductions = conshdlrdata->dualreductions && SCIPallowStrongDualReds(scip);
 
   /* check each constraint */
   for (c = 0; c < nconss; ++c)
   {
      SCIP_Bool cutoff;
      SCIP_Real valSlack;
      int cnt;
 
      assert( conss[c] != NULL );
      consdata = SCIPconsGetData(conss[c]);
      assert( consdata != NULL );
      assert( consdata->lincons != NULL );
 
      /* if the linear constraint has not been generated, we do nothing */
      if ( ! consdata->linconsactive )
      {
         someLinconsNotActive = TRUE;
         continue;
      }
 
      /* first perform propagation (it might happen that standard propagation is turned off) */
      SCIP_CALL( propIndicator(scip, conss[c], consdata, conshdlrdata, dualreductions, conshdlrdata->addopposite, &cutoff, &cnt) );
      if ( cutoff )
      {
         SCIPdebugMsg(scip, "Propagation in enforcing <%s> detected cutoff.\n", SCIPconsGetName(conss[c]));
         *result = SCIP_CUTOFF;
         return SCIP_OKAY;
      }
      if ( cnt > 0 )
      {
         SCIPdebugMsg(scip, "Propagation in enforcing <%s> reduced domains: %d.\n", SCIPconsGetName(conss[c]), cnt);
         *result = SCIP_REDUCEDDOM;
         return SCIP_OKAY;
      }
 
      /* check whether constraint is infeasible */
      binvar = consdata->binvar;
      valSlack = SCIPgetSolVal(scip, sol, consdata->slackvar);
      assert( ! SCIPisFeasNegative(scip, valSlack) );
      if ( ! SCIPisFeasZero(scip, SCIPgetSolVal(scip, sol, binvar)) && ! SCIPisFeasZero(scip, valSlack) )
      {
         /* binary variable is not fixed - otherwise we would not be infeasible */
         assert( SCIPvarGetLbLocal(binvar) < 0.5 && SCIPvarGetUbLocal(binvar) > 0.5 );
 
         if ( valSlack > maxSlack )
         {
            maxSlack = valSlack;
            branchCons = conss[c];
#ifdef SCIP_OUTPUT
            SCIPinfoMessage(scip, NULL, "Violated indicator constraint:\n");
            SCIP_CALL( SCIPprintCons(scip, conss[c], NULL) );
            SCIPinfoMessage(scip, NULL, ";\n");
            SCIPinfoMessage(scip, NULL, "Corresponding linear constraint:\n");
            SCIP_CALL( SCIPprintCons(scip, consdata->lincons, NULL) );
            SCIPinfoMessage(scip, NULL, ";\n");
#endif
         }
      }
   }
 
   /* if some constraint has a linear constraint that is not active, we need to check feasibility via the alternative polyhedron */
   if ( (someLinconsNotActive || conshdlrdata->enforcecuts) && conshdlrdata->sepaalternativelp )
   {
      SCIP_Bool cutoff;
      int ngen;
 
      SCIP_CALL( enforceCuts(scip, conshdlr, nconss, conss, sol, enfosepatype, genlogicor, &cutoff, &ngen) );
      if ( cutoff )
      {
         conshdlrdata->niiscutsgen += ngen;
         *result = SCIP_CUTOFF;
         return SCIP_OKAY;
      }
 
      if ( ngen > 0 )
      {
         conshdlrdata->niiscutsgen += ngen;
         if ( genlogicor )
         {
            SCIPdebugMsg(scip, "Generated %d constraints.\n", ngen);
            *result = SCIP_CONSADDED;
         }
         else
         {
            SCIPdebugMsg(scip, "Generated %d cuts.\n", ngen);
            *result = SCIP_SEPARATED;
         }
         return SCIP_OKAY;
      }
      SCIPdebugMsg(scip, "Enforcing produced no cuts.\n");
 
      assert( ! someLinconsNotActive || branchCons == NULL );
   }
 
   /* if all constraints are feasible */
   if ( branchCons == NULL )
   {
      SCIPdebugMsg(scip, "All indicator constraints are feasible.\n");
      return SCIP_OKAY;
   }
 
   /* skip branching if required */
   if ( ! conshdlrdata->branchindicators )
   {
      *result = SCIP_INFEASIBLE;
      return SCIP_OKAY;
   }
 
   /* otherwise create branches */
   SCIPdebugMsg(scip, "Branching on constraint <%s> (slack value: %f).\n", SCIPconsGetName(branchCons), maxSlack);
   consdata = SCIPconsGetData(branchCons);
   assert( consdata != NULL );
   binvar = consdata->binvar;
   slackvar = consdata->slackvar;
 
   /* node1: binvar = 1, slackvar = 0 */
   SCIP_CALL( SCIPcreateChild(scip, &node1, 0.0, SCIPcalcChildEstimate(scip, binvar, 1.0) ) );
 
   if ( SCIPvarGetLbLocal(binvar) < 0.5 )
   {
      SCIP_CALL( SCIPchgVarLbNode(scip, node1, binvar, 1.0) );
   }
 
   /* if slack-variable is multi-aggregated */
   assert( SCIPvarGetStatus(slackvar) != SCIP_VARSTATUS_MULTAGGR );
   if ( ! SCIPisFeasZero(scip, SCIPvarGetUbLocal(slackvar)) )
   {
      SCIP_CALL( SCIPchgVarUbNode(scip, node1, slackvar, 0.0) );
   }
 
   /* node2: binvar = 0, no restriction on slackvar */
   SCIP_CALL( SCIPcreateChild(scip, &node2, 0.0, SCIPcalcChildEstimate(scip, binvar, 0.0) ) );
 
   if ( SCIPvarGetUbLocal(binvar) > 0.5 )
   {
      SCIP_CALL( SCIPchgVarUbNode(scip, node2, binvar, 0.0) );
   }
 
   SCIP_CALL( SCIPresetConsAge(scip, branchCons) );
   *result = SCIP_BRANCHED;
 
   return SCIP_OKAY;
}
 
 
/** separate IIS-cuts via rounding
 *
 *  @todo Check whether the cover produced at the end is a feasible solution.
 */
static
SCIP_RETCODE separateIISRounding(
   SCIP*                 scip,               /**< SCIP pointer */
   SCIP_CONSHDLR*        conshdlr,           /**< constraint handler */
   SCIP_SOL*             sol,                /**< solution to be separated */
   SCIP_ENFOSEPATYPE     enfosepatype,       /**< type of enforcing/separating type */
   int                   nconss,             /**< number of constraints */
   SCIP_CONS**           conss,              /**< indicator constraints */
   int                   maxsepacuts,        /**< maximal number of cuts to be generated */
   SCIP_Bool*            cutoff,             /**< whether we detected a cutoff by an infeasible inequality */
   int*                  nGen                /**< number of domain changes */
   )
{ /*lint --e{850}*/
   SCIP_CONSHDLRDATA* conshdlrdata;
   SCIP_LPI* lp;
   int rounds;
   SCIP_Real threshold;
   SCIP_Bool* S;
   SCIP_Bool error;
   int oldsize = -1;
   SCIPdebug( int nGenOld = *nGen; )
 
   assert( scip != NULL );
   assert( conshdlr != NULL );
   assert( conss != NULL );
   assert( cutoff != NULL );
   assert( nGen != NULL );
 
   if ( *nGen >= maxsepacuts )
      return SCIP_OKAY;
 
   *cutoff = FALSE;
   rounds = 0;
 
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
   lp = conshdlrdata->altlp;
   assert( lp != NULL );
 
   SCIPdebugMsg(scip, "Separating IIS-cuts by rounding ...\n");
 
#ifndef NDEBUG
   SCIP_CALL( checkLPBoundsClean(scip, lp, nconss, conss) );
#endif
 
   /* change coefficients of bounds in alternative LP */
   if ( conshdlrdata->updatebounds )
   {
      /* update to local bounds */
      SCIP_CALL( updateFirstRow(scip, conshdlrdata) );
   }
 
   /* possibly update upper bound */
   SCIP_CALL( updateObjUpperbound(scip, conshdlr, conshdlrdata) );
 
   /* scale first row if necessary */
   SCIP_CALL( scaleFirstRow(scip, conshdlrdata) );
 
   /* set objective function to current solution */
   SCIP_CALL( setAltLPObj(scip, lp, sol, nconss, conss) );
 
   SCIP_CALL( SCIPallocBufferArray(scip, &S, nconss) );
 
   /* loop through the possible thresholds */
   for (threshold = conshdlrdata->roundingmaxthres;
        rounds < conshdlrdata->maxroundingrounds && threshold >= conshdlrdata->roundingminthres && *nGen < maxsepacuts && ! (*cutoff);
        threshold -= conshdlrdata->roundingoffset )
   {
      SCIP_Real value = 0.0;
      int size = 0;
      int nCuts = 0;
      int j;
#ifdef SCIP_DEBUG
      int nvarsone = 0;
      int nvarszero = 0;
      int nvarsfrac = 0;
#endif
 
      SCIPdebugMsg(scip, "Threshold: %g.\n", threshold);
 
      /* choose variables that have a value < current threshold value */
      for (j = 0; j < nconss; ++j)
      {
         SCIP_CONSDATA* consdata;
         SCIP_Real binvarval;
         SCIP_VAR* binvarneg;
 
         assert( conss[j] != NULL );
         consdata = SCIPconsGetData(conss[j]);
         assert( consdata != NULL );
 
         binvarval = SCIPgetVarSol(scip, consdata->binvar);
 
#ifdef SCIP_DEBUG
         if ( SCIPisFeasEQ(scip, binvarval, 1.0) )
            ++nvarsone;
         else if ( SCIPisFeasZero(scip, binvarval) )
            ++nvarszero;
         else
            ++nvarsfrac;
#endif
 
         /* check whether complementary (negated) variable is present as well */
         binvarneg = SCIPvarGetNegatedVar(consdata->binvar);
         assert( conshdlrdata->binvarhash != NULL );
         if ( binvarneg != NULL && SCIPhashmapExists(conshdlrdata->binvarhash, (void*) binvarneg) )
         {
            SCIP_Real binvarnegval = SCIPgetVarSol(scip, binvarneg);
 
            /* take larger one */
            if ( binvarval > binvarnegval )
               S[j] = TRUE;
            else
               S[j] = FALSE;
            continue;
         }
 
         /* check for threshold */
         if ( SCIPisFeasLT(scip, SCIPgetVarSol(scip, consdata->binvar), threshold) )
         {
            S[j] = TRUE;
            value += varGetObjDelta(consdata->binvar);
            ++size;
         }
         else
            S[j] = FALSE;
      }
 
      if ( size == nconss )
      {
         SCIPdebugMsg(scip, "All variables in the set. Continue ...\n");
         continue;
      }
 
      /* skip computation if size has not changed (computation is likely the same) */
      if ( size == oldsize )
      {
         SCIPdebugMsg(scip, "Skipping computation: size support has not changed.\n");
         continue;
      }
      oldsize = size;
 
#ifdef SCIP_DEBUG
      SCIPdebugMsg(scip, "   Vars with value 1: %d  0: %d  and fractional: %d.\n", nvarsone, nvarszero, nvarsfrac);
#endif
 
      /* fix the variables in S */
      SCIP_CALL( fixAltLPVariables(scip, lp, nconss, conss, S) );
 
      /* extend set S to a cover and generate cuts */
      SCIP_CALL( extendToCover(scip, conshdlr, conshdlrdata, lp, sol, enfosepatype, conshdlrdata->removable, conshdlrdata->genlogicor,
            nconss, conss, S, &size, &value, &error, cutoff, &nCuts) );
 
      /* we ignore errors in extendToCover */
      if ( nCuts > 0 )
      {
         *nGen += nCuts;
         ++rounds;
      }
      else
      {
         /* possibly update upper bound */
         SCIP_CALL( updateObjUpperbound(scip, conshdlr, conshdlrdata) );
      }
 
      /* reset bounds */
      SCIP_CALL( unfixAltLPVariables(scip, lp, nconss, conss, S) );
   }
   SCIPdebug( SCIPdebugMsg(scip, "Generated %d IISs.\n", *nGen - nGenOld); )
 
#ifndef NDEBUG
   SCIP_CALL( checkLPBoundsClean(scip, lp, nconss, conss) );
#endif
 
   SCIPfreeBufferArray(scip, &S);
 
   return SCIP_OKAY;
}
 
 
 
/** separate cuts based on perspective formulation
 *
 *  Hijazi, Bonami, and Ouorou (2014) introduced the following cuts: We consider an indicator constraint
 *  \f[
 *  y = 1 \rightarrow \alpha^T x \leq \beta
 *  \f]
 *  and assume finite bounds \f$\ell \leq x \leq u\f$. Then for \f$I \subseteq \{1, \dots, n\}\f$ define
 *  \f[
 *    \Sigma(I,x,y) = \sum_{i \notin I} \alpha_i x_i +
 *    y \Big(\sum_{i \in I, \alpha_i < 0} \alpha_i u_i + \sum_{i \in I, \alpha_i > 0} \alpha_i \ell_i +
 *    \sum_{i \notin I, \alpha_i < 0} \alpha_i \ell_i + \sum_{i \notin I, \alpha_i > 0} \alpha_i u_i - \beta\Big).
 *  \f]
 *  Then the cuts
 *  \f[
 *  \Sigma(I,x,y) \leq \sum_{i \notin I, \alpha_i < 0} \alpha_i \ell_i + \sum_{i \notin I, \alpha_i > 0} \alpha_i u_i
 *  \f]
 *  are valid for the disjunction
 *  \f[
 *  \{y = 0,\; \ell \leq x \leq u\} \cup \{y = 1,\; \ell \leq x \leq u,\; \alpha^T x \leq \beta\}.
 *  \f]
 *  These cuts can easily be separated for a given point \f$(x^*, y^*)\f$ by checking for each \f$i \in \{1, \dots, n\}\f$ whether
 *  \f[
 *  y^*(\alpha_i\, u_i\, [\alpha_i < 0] + \alpha_i\, \ell_i\, [\alpha_i > 0]) >
 *  \alpha_i x_i^* + y^* )\alpha_i \ell_i [\alpha_i < 0] + \alpha_i u_i [\alpha_i > 0]),
 *  \f]
 *  where \f$[C] = 1\f$ if condition \f$C\f$ is satisfied, otherwise it is 0.
 *  If the above inequality holds, \f$i\f$ is included in \f$I\f$, otherwise not.
 */
static
SCIP_RETCODE separatePerspective(
   SCIP*                 scip,               /**< SCIP pointer */
   SCIP_CONSHDLR*        conshdlr,           /**< constraint handler */
   SCIP_SOL*             sol,                /**< solution to be separated */
   int                   nconss,             /**< number of constraints */
   SCIP_CONS**           conss,              /**< indicator constraints */
   int                   maxsepacuts,        /**< maximal number of cuts to be generated */
   int*                  nGen                /**< number of generated cuts */
   )
{  /*lint --e{850}*/
   SCIP_CONSHDLRDATA* conshdlrdata;
   SCIP_VAR** cutvars;
   SCIP_Real* cutvals;
   int nvars;
   int c;
 
   assert( scip != NULL );
   assert( conshdlr != NULL );
   assert( conss != NULL );
   assert( nGen != NULL );
 
   if ( *nGen >= maxsepacuts )
      return SCIP_OKAY;
 
   nvars = SCIPgetNVars(scip);
   SCIP_CALL( SCIPallocBufferArray(scip, &cutvars, nvars+1) );
   SCIP_CALL( SCIPallocBufferArray(scip, &cutvals, nvars+1) );
 
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
 
   /* loop through constraints */
   for (c = 0; c < nconss; ++c)
   {
      SCIP_CONSDATA* consdata;
      SCIP_CONS* lincons;
      SCIP_VAR* slackvar;
      SCIP_VAR* binvar;
      SCIP_Real binval;
 
      assert( conss[c] != NULL );
      consdata = SCIPconsGetData(conss[c]);
      assert( consdata != NULL );
      slackvar = consdata->slackvar;
 
      lincons = consdata->lincons;
      assert( lincons != NULL );
 
      binvar = consdata->binvar;
      assert( binvar != NULL );
      binval = SCIPgetSolVal(scip, sol, binvar);
 
      if ( SCIPconsIsActive(lincons) )
      {
         SCIP_VAR** linvars;
         SCIP_Real* linvals;
         SCIP_Real linrhs;
         SCIP_Bool finitebound = TRUE;
         SCIP_Real cutrhs = 0.0;
         SCIP_Real cutval;
         SCIP_Real signfactor = 1.0;
         SCIP_Real ypart;
         SCIP_Bool islocal = FALSE;
         int nlinvars;
         int cnt = 0;
         int j;
 
         linvars = SCIPgetVarsLinear(scip, lincons);
         linvals = SCIPgetValsLinear(scip, lincons);
         nlinvars = SCIPgetNVarsLinear(scip, lincons);
 
         linrhs = SCIPgetRhsLinear(scip, lincons);
         if ( SCIPisInfinity(scip, linrhs) )
         {
            if ( ! SCIPisInfinity(scip, SCIPgetLhsLinear(scip, lincons)) )
            {
               linrhs = -SCIPgetLhsLinear(scip, lincons);
               signfactor = -1.0;
            }
            else
               continue;
         }
         ypart = -linrhs;
         cutval = binval * ypart;
 
         for (j = 0; j < nlinvars; ++j)
         {
            SCIP_Real linval;
            SCIP_Real lb;
            SCIP_Real ub;
            SCIP_Real din = 0.0;
            SCIP_Real dout = 0.0;
            SCIP_Real xpart;
            SCIP_Real xval;
 
            if ( linvars[j] == slackvar )
               continue;
 
            if ( conshdlrdata->sepapersplocal )
            {
               lb = SCIPvarGetLbLocal(linvars[j]);
               ub = SCIPvarGetUbLocal(linvars[j]);
 
               if ( lb > SCIPvarGetLbGlobal(linvars[j]) )
                  islocal = TRUE;
               if ( ub < SCIPvarGetUbGlobal(linvars[j]) )
                  islocal = TRUE;
            }
            else
            {
               lb = SCIPvarGetLbGlobal(linvars[j]);
               ub = SCIPvarGetUbGlobal(linvars[j]);
            }
 
            /* skip cases with unbounded variables */
            if ( SCIPisInfinity(scip, -lb) || SCIPisInfinity(scip, ub) )
            {
               finitebound = FALSE;
               break;
            }
 
            /* compute rest parts for i in the set (din) or not in the set (dout) */
            linval = signfactor * linvals[j];
            if ( SCIPisNegative(scip, linval) )
            {
               din += linval * ub;
               dout += linval * lb;
            }
            else if ( SCIPisPositive(scip, linval) )
            {
               din += linval * lb;
               dout += linval * ub;
            }
 
            xval = SCIPgetSolVal(scip, sol, linvars[j]);
            xpart = linval * xval;
 
            /* if din > dout, we want to include i in the set */
            if ( SCIPisGT(scip, binval * din, binval * dout + xpart) )
            {
               ypart += din;
               cutval += binval * din;
            }
            else
            {
               /* otherwise i is not in the set */
               ypart += dout;
 
               cutrhs += dout;
               cutval += binval * dout + xpart;
 
               cutvars[cnt] = linvars[j];
               cutvals[cnt++] = linval;
            }
         }
 
         if ( ! finitebound )
            continue;
 
         if ( SCIPisEfficacious(scip, cutval - cutrhs) )
         {
            SCIP_ROW* row;
            SCIP_Bool infeasible;
            char name[50];
 
            /* add y-variable */
            cutvars[cnt] = binvar;
            cutvals[cnt] = ypart;
            ++cnt;
 
            SCIPdebugMsg(scip, "Found cut of lhs value %f > %f.\n", cutval, cutrhs);
            (void) SCIPsnprintf(name, 50, "persp%d", conshdlrdata->nperspcutsgen + *nGen);
            SCIP_CALL( SCIPcreateEmptyRowCons(scip, &row, conss[c], name, -SCIPinfinity(scip), cutrhs, islocal, FALSE, conshdlrdata->removable) );
            SCIP_CALL( SCIPaddVarsToRow(scip, row, cnt, cutvars, cutvals) );
#ifdef SCIP_OUTPUT
            SCIP_CALL( SCIPprintRow(scip, row, NULL) );
#endif
            SCIP_CALL( SCIPaddRow(scip, row, FALSE, &infeasible) );
            assert( ! infeasible );
            SCIP_CALL( SCIPreleaseRow(scip, &row) );
            SCIP_CALL( SCIPresetConsAge(scip, conss[c]) );
            ++(*nGen);
         }
      }
      if ( *nGen >= maxsepacuts )
         break;
   }
 
   SCIPfreeBufferArray(scip, &cutvals);
   SCIPfreeBufferArray(scip, &cutvars);
 
   return SCIP_OKAY;
}
 
 
/** separation method
 *
 *  We first check whether coupling inequalities can be separated (if required). If not enough of
 *  these could be generated, we check whether IIS inequalities can be separated.
 */
static
SCIP_RETCODE separateIndicators(
   SCIP*                 scip,               /**< SCIP pointer */
   SCIP_CONSHDLR*        conshdlr,           /**< constraint handler */
   int                   nconss,             /**< number of constraints */
   int                   nusefulconss,       /**< number of useful constraints */
   SCIP_CONS**           conss,              /**< indicator constraints */
   SCIP_SOL*             sol,                /**< solution to be separated */
   SCIP_ENFOSEPATYPE     enfosepatype,       /**< type of enforcing/separating type */
   SCIP_RESULT*          result              /**< result */
   )
{
   SCIP_CONSHDLRDATA* conshdlrdata;
   int maxsepacuts;
   int ncuts;
 
   assert( scip != NULL );
   assert( conshdlr != NULL );
   assert( conss != NULL );
   assert( result != NULL );
 
   *result = SCIP_DIDNOTRUN;
 
   if ( nconss == 0 )
      return SCIP_OKAY;
 
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
   ncuts = 0;
 
   /* get the maximal number of cuts allowed in a separation round */
   if ( SCIPgetDepth(scip) == 0 )
      maxsepacuts = conshdlrdata->maxsepacutsroot;
   else
      maxsepacuts = conshdlrdata->maxsepacuts;
 
   /* first separate coupling inequalities (if required) */
   if ( conshdlrdata->sepacouplingcuts )
   {
      int c;
 
      *result = SCIP_DIDNOTFIND;
 
      /* check each constraint */
      for (c = 0; c < nusefulconss && ncuts < maxsepacuts; ++c)
      {
         SCIP_CONSDATA* consdata;
         SCIP_Bool islocal;
         SCIP_Real ub;
 
         assert( conss != NULL );
         assert( conss[c] != NULL );
         consdata = SCIPconsGetData(conss[c]);
         assert( consdata != NULL );
         assert( consdata->slackvar != NULL );
         assert( consdata->binvar != NULL );
 
         /* get upper bound for slack variable in linear constraint */
         islocal = FALSE;
         if ( conshdlrdata->sepacouplinglocal )
         {
            ub = SCIPvarGetUbLocal(consdata->slackvar);
            if ( ub < SCIPvarGetUbGlobal(consdata->slackvar) )
               islocal = TRUE;
         }
         else
            ub = SCIPvarGetUbGlobal(consdata->slackvar);
         assert( ! SCIPisFeasNegative(scip, ub) );
 
         /* only use coefficients that are not too large */
         if ( ub <= conshdlrdata->sepacouplingvalue )
         {
            SCIP_Real activity;
 
            activity = SCIPgetSolVal(scip, sol, consdata->slackvar) + ub * SCIPgetSolVal(scip, sol, consdata->binvar) - ub;
            if ( SCIPisEfficacious(scip, activity) )
            {
               SCIP_ROW* row;
               SCIP_Bool infeasible;
#ifndef NDEBUG
               char name[50];
 
               (void) SCIPsnprintf(name, 50, "couple%d", c);
               SCIP_CALL( SCIPcreateEmptyRowCons(scip, &row, conss[c], name, -SCIPinfinity(scip), ub, islocal, FALSE, conshdlrdata->removable) );
#else
               SCIP_CALL( SCIPcreateEmptyRowCons(scip, &row, conss[c], "", -SCIPinfinity(scip), ub, islocal, FALSE, conshdlrdata->removable) );
#endif
               SCIP_CALL( SCIPcacheRowExtensions(scip, row) );
 
               SCIP_CALL( SCIPaddVarToRow(scip, row, consdata->slackvar, 1.0) );
               SCIP_CALL( SCIPaddVarToRow(scip, row, consdata->binvar, ub) );
               SCIP_CALL( SCIPflushRowExtensions(scip, row) );
 
               SCIPdebugMsg(scip, "Separated coupling inequality for indicator constraint <%s> (coeff: %f).\n", SCIPconsGetName(conss[c]), ub);
#ifdef SCIP_OUTPUT
               SCIP_CALL( SCIPprintRow(scip, row, NULL) );
#endif
               SCIP_CALL( SCIPaddRow(scip, row, FALSE, &infeasible) );
               assert( ! infeasible );
               SCIP_CALL( SCIPreleaseRow(scip, &row) );
 
               SCIP_CALL( SCIPresetConsAge(scip, conss[c]) );
               *result = SCIP_SEPARATED;
 
               ++ncuts;
            }
         }
      }
      SCIPdebugMsg(scip, "Number of separated coupling inequalities: %d.\n", ncuts);
   }
 
   /* separate cuts from the alternative lp (if required) */
   if ( conshdlrdata->sepaalternativelp && ncuts < SEPAALTTHRESHOLD )
   {
      SCIP_Bool cutoff;
      int noldcuts;
 
      SCIPdebugMsg(scip, "Separating inequalities for indicator constraints.\n");
 
      noldcuts = ncuts;
      if ( *result == SCIP_DIDNOTRUN )
         *result = SCIP_DIDNOTFIND;
 
      /* start separation */
      SCIP_CALL( separateIISRounding(scip, conshdlr, sol, enfosepatype, nconss, conss, maxsepacuts, &cutoff, &ncuts) );
      SCIPdebugMsg(scip, "Separated %d cuts from indicator constraints.\n", ncuts - noldcuts);
 
      if ( cutoff )
         *result = SCIP_CUTOFF;
      else if ( ncuts > noldcuts )
      {
         conshdlrdata->niiscutsgen += ncuts;
 
         /* possibly overwrite result from separation above */
         if ( conshdlrdata->genlogicor )
            *result = SCIP_CONSADDED;
         else
            *result = SCIP_SEPARATED;
      }
   }
 
   /* separate cuts based on perspective formulation */
   if ( conshdlrdata->sepaperspective && ncuts < SEPAALTTHRESHOLD )
   {
      int noldcuts;
 
      SCIPdebugMsg(scip, "Separating inequalities based on perspective formulation.\n");
 
      noldcuts = ncuts;
      if ( *result == SCIP_DIDNOTRUN )
         *result = SCIP_DIDNOTFIND;
 
      /* start separation */
      SCIP_CALL( separatePerspective(scip, conshdlr, sol, nconss, conss, maxsepacuts, &ncuts) );
      SCIPdebugMsg(scip, "Separated %d cuts from perspective formulation.\n", ncuts - noldcuts);
 
      if ( ncuts > noldcuts )
      {
         conshdlrdata->nperspcutsgen += ncuts;
 
         /* possibly overwrite result from separation above */
         *result = SCIP_SEPARATED;
      }
   }
 
   return SCIP_OKAY;
}
 
 
/** initializes the constraint handler data */
static
void initConshdlrData(
   SCIP*                 scip,               /**< SCIP pointer */
   SCIP_CONSHDLRDATA*    conshdlrdata        /**< constraint handler data */
   )
{
   assert( conshdlrdata != NULL );
 
   conshdlrdata->linconsevents = FALSE;
   conshdlrdata->linconsboundschanged = TRUE;
   conshdlrdata->boundhaschanged = TRUE;
   conshdlrdata->removable = TRUE;
   conshdlrdata->scaled = FALSE;
   conshdlrdata->altlp = NULL;
   conshdlrdata->nrows = 0;
   conshdlrdata->varhash = NULL;
   conshdlrdata->slackhash = NULL;
   conshdlrdata->lbhash = NULL;
   conshdlrdata->ubhash = NULL;
   conshdlrdata->nlbbounds = 0;
   conshdlrdata->nubbounds = 0;
   conshdlrdata->nslackvars = 0;
   conshdlrdata->objcutindex = -1;
   conshdlrdata->objupperbound = SCIPinfinity(scip);
   conshdlrdata->objaltlpbound = SCIPinfinity(scip);
   conshdlrdata->roundingminthres = 0.1;
   conshdlrdata->roundingmaxthres = 0.6;
   conshdlrdata->maxroundingrounds = MAXROUNDINGROUNDS;
   conshdlrdata->roundingoffset = 0.1;
   conshdlrdata->addedcouplingcons = FALSE;
   conshdlrdata->ninitconss = 0;
   conshdlrdata->nbinvarszero = 0;
   conshdlrdata->performedrestart = FALSE;
   conshdlrdata->objindicatoronly = FALSE;
   conshdlrdata->objothervarsonly = FALSE;
   conshdlrdata->minabsobj = 0.0;
   conshdlrdata->normtype = 'e';
   conshdlrdata->niiscutsgen = 0;
   conshdlrdata->nperspcutsgen = 0;
}
 
 
/* ---------------------------- upgrading methods -----------------------------------*/
 
/** tries to upgrade a linear constraint into an indicator constraint
 *
 *  For some linear constraint of the form \f$a^T x + \alpha\, y \geq \beta\f$ with \f$y \in \{0,1\}\f$, we can upgrade
 *  it to an indicator constraint if for the residual value \f$a^T x \geq \gamma\f$, we have \f$\alpha + \gamma \geq
 *  \beta\f$: in this case, the constraint is always satisfied if \f$y = 1\f$.
 *
 *  Similarly, for a linear constraint in the form \f$a^T x + \alpha\, y \leq \beta\f$ with \f$y \in \{0,1\}\f$, we can
 *  upgrade it to an indicator constraint if for the residual value \f$a^T x \leq \gamma\f$, we have \f$\alpha + \gamma
 *  \leq \beta\f$.
 */
static
SCIP_DECL_LINCONSUPGD(linconsUpgdIndicator)
{  /*lint --e{715}*/
   SCIP_CONSHDLRDATA* conshdlrdata;
   SCIP_CONSHDLR* conshdlr;
   SCIP_Real minactivity = 0.0;
   SCIP_Real maxactivity = 0.0;
   SCIP_Real maxabsval = -1.0;
   SCIP_Real secabsval = -1.0;
   int maxabsvalidx = -1;
   int j;
 
   assert( scip != NULL );
   assert( upgdcons != NULL );
   assert( ! SCIPconsIsModifiable(cons) );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(SCIPconsGetHdlr(cons)), "linear", SCIP_INVALIDCALL );
 
   /* do not upgrade if there are at most 2 variables (2 variables should be upgraded to a varbound constraint) */
   if ( nvars <= 2 )
      return SCIP_OKAY;
 
   /* cannot currently ranged constraints, since we can only return one constraint (and we would need one for each side each) */
   if ( ! SCIPisInfinity(scip, -lhs) && ! SCIPisInfinity(scip, rhs) )
      return SCIP_OKAY;
 
   /* check whether upgrading is turned on */
   conshdlr = SCIPfindConshdlr(scip, "indicator");
   assert( conshdlr != NULL );
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
 
   if ( ! conshdlrdata->upgradelinear )
      return SCIP_OKAY;
 
   /* calculate activities */
   for (j = 0; j < nvars; ++j)
   {
      SCIP_VAR* var;
      SCIP_Real val;
      SCIP_Real lb;
      SCIP_Real ub;
 
      val = vals[j];
      assert( ! SCIPisZero(scip, val) );
 
      var = vars[j];
      assert( var != NULL );
 
      /* store maximal (and second to largest) value of coefficients */
      if ( SCIPisGE(scip, REALABS(val), maxabsval) )
      {
         secabsval = maxabsval;
         maxabsval = REALABS(val);
         maxabsvalidx = j;
      }
 
      if ( ! SCIPvarIsBinary(var) )
      {
         if ( val > 0.0 )
         {
            lb = SCIPvarGetLbGlobal(var);
            ub = SCIPvarGetUbGlobal(var);
         }
         else
         {
            ub = SCIPvarGetLbGlobal(var);
            lb = SCIPvarGetUbGlobal(var);
         }
 
         /* compute minimal activity */
         if ( SCIPisInfinity(scip, -lb) )
            minactivity = -SCIPinfinity(scip);
         else
         {
            if ( ! SCIPisInfinity(scip, -minactivity) )
               minactivity += val * lb;
         }
 
         /* compute maximal activity */
         if ( SCIPisInfinity(scip, ub) )
            maxactivity = SCIPinfinity(scip);
         else
         {
            if ( ! SCIPisInfinity(scip, maxactivity) )
               maxactivity += val * ub;
         }
      }
   }
   assert( maxabsval >= 0.0 );
   assert( 0 <= maxabsvalidx && maxabsvalidx < nvars );
 
   /* exit if largest coefficient does not belong to binary variable */
   if ( ! SCIPvarIsBinary(vars[maxabsvalidx]) )
      return SCIP_OKAY;
 
   /* exit if the second largest coefficient is as large as largest */
   if ( SCIPisEQ(scip, secabsval, maxabsval) )
      return SCIP_OKAY;
 
   /* cannot upgrade if all activities are infinity */
   if ( SCIPisInfinity(scip, -minactivity) && SCIPisInfinity(scip, maxactivity) )
      return SCIP_OKAY;
 
   /* check each variable as indicator variable */
   for (j = 0; j < nvars; ++j)
   {
      SCIP_VAR** indconsvars;
      SCIP_Real* indconsvals;
      SCIP_Bool upgdlhs = FALSE;
      SCIP_Bool upgdrhs = FALSE;
      SCIP_Bool indneglhs = FALSE;
      SCIP_Bool indnegrhs = FALSE;
      SCIP_VAR* indvar;
      SCIP_Real indval;
      int l;
 
      indvar = vars[j];
      indval = vals[j];
      assert( ! SCIPisZero(scip, indval) );
 
      if ( ! SCIPvarIsBinary(indvar) )
         continue;
 
      /* check for upgrading of lhs */
      if ( ! SCIPisInfinity(scip, -minactivity) && ! SCIPisInfinity(scip, -lhs) )
      {
         /* upgrading is possible with binary variable */
         if ( SCIPisGE(scip, minactivity, lhs) )
            upgdlhs = TRUE;
 
         /* upgrading is possible with negated binary variable */
         if ( SCIPisGE(scip, minactivity + indval, lhs) )
         {
            upgdlhs = TRUE;
            indneglhs = TRUE;
         }
      }
 
      /* check for upgrading of rhs */
      if ( ! SCIPisInfinity(scip, maxactivity) && ! SCIPisInfinity(scip, rhs) )
      {
         /* upgrading is possible with binary variable */
         if ( SCIPisLE(scip, maxactivity, rhs) )
            upgdrhs = TRUE;
 
         /* upgrading is possible with negated binary variable */
         if ( SCIPisLE(scip, maxactivity + indval, rhs) )
         {
            upgdrhs = TRUE;
            indnegrhs = TRUE;
         }
      }
 
      /* upgrade constraint */
      if ( upgdlhs || upgdrhs )
      {
         SCIP_VAR* indvar2;
         SCIP_Real bnd;
         int cnt = 0;
 
         assert( ! upgdlhs || ! upgdrhs ); /* cannot treat ranged rows */
         SCIPdebugMsg(scip, "upgrading constraint <%s> to an indicator constraint.\n", SCIPconsGetName(cons));
 
         SCIP_CALL( SCIPallocBufferArray(scip, &indconsvars, nvars - 1) );
         SCIP_CALL( SCIPallocBufferArray(scip, &indconsvals, nvars - 1) );
 
         /* create constraint */
         for (l = 0; l < nvars; ++l)
         {
            if ( vars[l] == indvar )
               continue;
            indconsvars[cnt] = vars[l];
            if ( upgdlhs )
               indconsvals[cnt] = -vals[l];
            else
               indconsvals[cnt] = vals[l];
            ++cnt;
         }
 
         if ( indneglhs || indnegrhs )
         {
            SCIP_CALL( SCIPgetNegatedVar(scip, indvar, &indvar2) );
         }
         else
            indvar2 = indvar;
 
         if ( upgdlhs )
         {
            bnd = -lhs;
            if ( ! indneglhs )
               bnd -= indval;
            SCIP_CALL( SCIPcreateConsIndicator(scip, upgdcons, SCIPconsGetName(cons), indvar2, nvars-1, indconsvars, indconsvals, bnd,
                  SCIPconsIsInitial(cons), SCIPconsIsSeparated(cons), SCIPconsIsEnforced(cons), SCIPconsIsChecked(cons), SCIPconsIsPropagated(cons),
                  SCIPconsIsLocal(cons), SCIPconsIsDynamic(cons), SCIPconsIsRemovable(cons), SCIPconsIsStickingAtNode(cons)) );
         }
         else
         {
            bnd = rhs;
            if ( ! indnegrhs )
               bnd -= indval;
            SCIP_CALL( SCIPcreateConsIndicator(scip, upgdcons, SCIPconsGetName(cons), indvar2, nvars-1, indconsvars, indconsvals, bnd,
                  SCIPconsIsInitial(cons), SCIPconsIsSeparated(cons), SCIPconsIsEnforced(cons), SCIPconsIsChecked(cons), SCIPconsIsPropagated(cons),
                  SCIPconsIsLocal(cons), SCIPconsIsDynamic(cons), SCIPconsIsRemovable(cons), SCIPconsIsStickingAtNode(cons)) );
         }
 
#ifdef SCIP_DEBUG
         SCIPinfoMessage(scip, NULL, "upgrade: \n");
         SCIP_CALL( SCIPprintCons(scip, cons, NULL) );
         SCIPinfoMessage(scip, NULL, "\n");
         SCIP_CALL( SCIPprintCons(scip, *upgdcons, NULL) );
         SCIPinfoMessage(scip, NULL, "\n");
         SCIP_CALL( SCIPprintCons(scip, SCIPgetLinearConsIndicator(*upgdcons), NULL) );
         SCIPinfoMessage(scip, NULL, "  (minact: %f, maxact: %f)\n", minactivity, maxactivity);
#endif
 
         SCIPfreeBufferArray(scip, &indconsvars);
         SCIPfreeBufferArray(scip, &indconsvals);
 
         return SCIP_OKAY;
      }
   }
 
   return SCIP_OKAY;
}
 
 
/* ---------------------------- constraint handler callback methods ----------------------*/
 
/** copy method for constraint handler plugins (called when SCIP copies plugins) */
static
SCIP_DECL_CONSHDLRCOPY(conshdlrCopyIndicator)
{  /*lint --e{715}*/
   assert( scip != NULL );
   assert( conshdlr != NULL );
   assert( valid != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   /* call inclusion method of constraint handler */
   SCIP_CALL( SCIPincludeConshdlrIndicator(scip) );
 
   *valid = TRUE;
 
   return SCIP_OKAY;
}
 
 
/** initialization method of constraint handler (called after problem was transformed) */
static
SCIP_DECL_CONSINIT(consInitIndicator)
{  /*lint --e{715}*/
   SCIP_CONSHDLRDATA* conshdlrdata;
 
   assert( scip != NULL );
   assert( conshdlr != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
 
   initConshdlrData(scip, conshdlrdata);
 
   /* find trysol heuristic */
   if ( conshdlrdata->trysolutions && conshdlrdata->heurtrysol == NULL )
   {
      conshdlrdata->heurtrysol = SCIPfindHeur(scip, "trysol");
   }
 
   return SCIP_OKAY;
}
 
 
/** deinitialization method of constraint handler (called before transformed problem is freed) */
static
SCIP_DECL_CONSEXIT(consExitIndicator)
{  /*lint --e{715}*/
   SCIP_CONSHDLRDATA* conshdlrdata;
   SCIP_CONSDATA* consdata;
   int i;
   int j;
 
   assert( scip != NULL );
   assert( conshdlr != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
 
   if ( conshdlrdata->binvarhash != NULL )
      SCIPhashmapFree(&conshdlrdata->binvarhash);
 
   if ( conshdlrdata->binslackvarhash != NULL )
      SCIPhashmapFree(&conshdlrdata->binslackvarhash);
 
   /* drop bound change events on variables of linear constraints */
   for (i = 0; i < nconss; i++)
   {
      consdata = SCIPconsGetData(conss[i]);
      assert( consdata != NULL );
 
      if ( consdata->varswithevents != NULL )
      {
         assert( consdata->eventtypes != NULL );
         assert( consdata->lincons != NULL );
 
         for (j = 0; j < consdata->nevents; ++j)
         {
            SCIP_CALL( SCIPdropVarEvent(scip, consdata->varswithevents[j], consdata->eventtypes[j], conshdlrdata->eventhdlrlinconsbound, (SCIP_EVENTDATA*) conshdlrdata, -1) );
         }
         SCIPfreeBlockMemoryArray(scip, &consdata->varswithevents, consdata->nevents);
         SCIPfreeBlockMemoryArray(scip, &consdata->eventtypes, consdata->nevents);
 
         consdata->nevents = 0;
         assert( consdata->varswithevents == NULL );
         assert( consdata->eventtypes == NULL );
      }
   }
 
   SCIPfreeBlockMemoryArrayNull(scip, &conshdlrdata->addlincons, conshdlrdata->maxaddlincons);
   conshdlrdata->maxaddlincons = 0;
   conshdlrdata->naddlincons = 0;
   conshdlrdata->nrows = 0;
 
   return SCIP_OKAY;
}
 
 
/** destructor of constraint handler to free constraint handler data (called when SCIP is exiting) */
static
SCIP_DECL_CONSFREE(consFreeIndicator)
{
   SCIP_CONSHDLRDATA* conshdlrdata;
 
   assert( scip != NULL );
   assert( conshdlr != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
   assert( conshdlrdata->altlp == NULL );
   assert( conshdlrdata->varhash == NULL );
   assert( conshdlrdata->lbhash == NULL );
   assert( conshdlrdata->ubhash == NULL );
   assert( conshdlrdata->slackhash == NULL );
 
   if ( conshdlrdata->maxaddlincons > 0 )
   {
      /* if problem was not yet transformed the array may need to be freed, because we did not call the EXIT callback */
      SCIPfreeBlockMemoryArrayNull(scip, &conshdlrdata->addlincons, conshdlrdata->maxaddlincons);
   }
   assert( conshdlrdata->addlincons == NULL );
   conshdlrdata->naddlincons = 0;
   conshdlrdata->maxaddlincons = 0;
 
   SCIPfreeBlockMemory(scip, &conshdlrdata);
 
   return SCIP_OKAY;
}
 
 
/** solving process initialization method of constraint handler (called when branch and bound process is about to begin) */
static
SCIP_DECL_CONSINITSOL(consInitsolIndicator)
{
   SCIP_CONSHDLRDATA* conshdlrdata;
   int c;
 
   assert( scip != NULL );
   assert( conshdlr != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   if ( SCIPgetStatus(scip) == SCIP_STATUS_OPTIMAL || SCIPgetStatus(scip) == SCIP_STATUS_INFEASIBLE ||
        SCIPgetStatus(scip) == SCIP_STATUS_UNBOUNDED || SCIPgetStatus(scip) == SCIP_STATUS_INFORUNBD )
      return SCIP_OKAY;
 
   SCIPdebugMsg(scip, "Initsol for indicator constraints.\n");
 
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
   assert( conshdlrdata->slackhash == NULL );
 
   conshdlrdata->boundhaschanged = TRUE;  /* make sure that we propagate at the beginning */
 
   SCIP_CALL( SCIPgetCharParam(scip, "separating/efficacynorm", &conshdlrdata->normtype) );
 
   if ( conshdlrdata->sepaalternativelp )
   {
      /* generate hash for storing all slack variables (size is just a guess) */
      SCIP_CALL( SCIPhashmapCreate(&conshdlrdata->slackhash, SCIPblkmem(scip), SCIPgetNVars(scip)) );
      assert( conshdlrdata->slackhash != NULL );
 
      /* first initialize slack hash */
      for (c = 0; c < nconss; ++c)
      {
         SCIP_CONSDATA* consdata;
 
         assert( conss != NULL );
         assert( conss[c] != NULL );
         assert( SCIPconsIsTransformed(conss[c]) );
 
         consdata = SCIPconsGetData(conss[c]);
         assert( consdata != NULL );
 
         assert( consdata->slackvar != NULL );
 
         /* insert slack variable into hash */
         SCIP_CALL( SCIPhashmapInsertInt(conshdlrdata->slackhash, consdata->slackvar, INT_MAX) );
         assert( SCIPhashmapExists(conshdlrdata->slackhash, consdata->slackvar) );
         ++conshdlrdata->nslackvars;
      }
 
      if ( conshdlrdata->genlogicor )
      {
         SCIP_CONSHDLR* logicorconshdlr;
         int logicorsepafreq;
         int sepafreq;
 
         /* If we generate logicor constraints, but the separation frequency is not 1, output warning */
         logicorconshdlr = SCIPfindConshdlr(scip, "logicor");
         if ( logicorconshdlr == NULL )
         {
            SCIPerrorMessage("Logicor constraint handler not included, cannot generate constraints.\n");
            return SCIP_ERROR;
         }
         logicorsepafreq = SCIPconshdlrGetSepaFreq(logicorconshdlr);
         sepafreq = SCIPconshdlrGetSepaFreq(conshdlr);
         if ( (sepafreq != -1 || conshdlrdata->enforcecuts) && logicorsepafreq != 1 )
         {
            SCIPwarningMessage(scip, "For better performance set parameter 'constraints/logicor/sepafreq' to 1 if 'constraints/included/genlogicor' is true.\n");
         }
      }
   }
 
   /* check each constraint */
   conshdlrdata->objothervarsonly = TRUE;
   for (c = 0; c < nconss; ++c)
   {
      SCIP_CONSDATA* consdata;
 
      assert( conss != NULL );
      assert( conss[c] != NULL );
      assert( SCIPconsIsTransformed(conss[c]) );
 
      consdata = SCIPconsGetData(conss[c]);
      assert( consdata != NULL );
      assert( consdata->binvar != NULL );
      assert( consdata->slackvar != NULL );
 
      /* Presolving might replace a slack variable by an active variable. Thus, the objective of a slack variables might
       * be nonzero. However, we do not need to check slack variables here. */
      if ( ! SCIPisZero(scip, varGetObjDelta(consdata->binvar)) )
         conshdlrdata->objothervarsonly = FALSE;
 
      /* deactivate */
      if ( ! consdata->linconsactive )
      {
         SCIP_CALL( SCIPdisableCons(scip, consdata->lincons) );
      }
      else
      {
         /* add constraint to alternative LP if not already done */
         if ( conshdlrdata->sepaalternativelp && consdata->colindex < 0 )
         {
            SCIP_CALL( addAltLPConstraint(scip, conshdlr, consdata->lincons, consdata->slackvar, 1.0, &consdata->colindex) );
            SCIPdebugMsg(scip, "Added column for <%s> to alternative LP with column index %d.\n", SCIPconsGetName(conss[c]),consdata->colindex);
#ifdef SCIP_OUTPUT
            SCIP_CALL( SCIPprintCons(scip, consdata->lincons, NULL) );
            SCIPinfoMessage(scip, NULL, ";\n");
#endif
         }
      }
 
      /* add nlrow representation to NLP, if NLP had been constructed
       *
       * Note, that we did not tell SCIP in exitpre that we have something to add to the NLP, thus
       * indicators are only available in the NLP for MINLPs, but not for MIPs with indicators.
       */
      if ( SCIPisNLPConstructed(scip) && SCIPconsIsChecked(conss[c]) )
      {
         /* create nonlinear row binary variable * slack variable = 0 */
         SCIP_NLROW* nlrow;
         SCIP_EXPR* quadexpr;
         SCIP_EXPR* varexprs[2];
 
         SCIP_CALL( SCIPcreateExprVar(scip, &varexprs[0], consdata->binvar, NULL, NULL) );
         SCIP_CALL( SCIPcreateExprVar(scip, &varexprs[1], consdata->slackvar, NULL, NULL) );
         SCIP_CALL( SCIPcreateExprProduct(scip, &quadexpr, 2, varexprs, 1.0, NULL, NULL) );
 
         SCIP_CALL( SCIPcreateNlRow(scip, &nlrow, SCIPconsGetName(conss[c]), 0.0, 0, NULL, NULL, quadexpr, 0.0, 0.0, SCIP_EXPRCURV_UNKNOWN) );
 
         SCIP_CALL( SCIPreleaseExpr(scip, &quadexpr) );
         SCIP_CALL( SCIPreleaseExpr(scip, &varexprs[1]) );
         SCIP_CALL( SCIPreleaseExpr(scip, &varexprs[0]) );
 
         /* add row to NLP and forget about it */
         SCIP_CALL( SCIPaddNlRow(scip, nlrow) );
         SCIP_CALL( SCIPreleaseNlRow(scip, &nlrow) );
      }
   }
 
   SCIPdebugMsg(scip, "Initialized %d indicator constraints.\n", nconss);
 
   /* check additional constraints */
   if ( conshdlrdata->sepaalternativelp )
   {
      SCIP_CONS* cons;
      int colindex;
      int cnt = 0;
 
      /* add stored linear constraints if they exist */
      if ( conshdlrdata->naddlincons > 0 )
      {
         for (c = 0; c < conshdlrdata->naddlincons; ++c)
         {
            cons = conshdlrdata->addlincons[c];
 
            /* get transformed constraint - since it is needed only here, we do not store the information */
            if ( ! SCIPconsIsTransformed(cons) )
            {
               SCIP_CALL( SCIPgetTransformedCons(scip, conshdlrdata->addlincons[c], &cons) );
 
               /* @todo check when exactly the transformed constraint does not exist - SCIPisActive() does not suffice */
               if ( cons == NULL )
                  continue;
            }
            SCIP_CALL( addAltLPConstraint(scip, conshdlr, cons, NULL, 0.0, &colindex) );
            ++cnt;
 
#ifdef SCIP_OUTPUT
            SCIP_CALL( SCIPprintCons(scip, cons, NULL) );
            SCIPinfoMessage(scip, NULL, ";\n");
#endif
         }
         SCIPdebugMsg(scip, "Added %d additional columns to alternative LP.\n", cnt);
      }
      else
      {
         /* if no stored linear constraints are available, possibly collect other linear constraints; we only use linear
          * constraints, since most other constraints involve integral variables, and in this context we will likely
          * benefit much more from continuous variables. */
         if ( conshdlrdata->useotherconss )
         {
            const char* conshdlrname;
            SCIP_CONS** allconss;
            int nallconss;
 
            nallconss = SCIPgetNConss(scip);
            allconss = SCIPgetConss(scip);
 
            /* loop through all constraints */
            for (c = 0; c < nallconss; ++c)
            {
               /* get constraint */
               cons = allconss[c];
               assert( cons != NULL );
               assert( SCIPconsIsTransformed(cons) );
 
               /* get constraint handler name */
               conshdlrname = SCIPconshdlrGetName(SCIPconsGetHdlr(cons));
 
               /* check type of constraint (only take modifiable linear constraints) */
               if ( strcmp(conshdlrname, "linear") == 0 && ! SCIPconsIsModifiable(cons) )
               {
                  /* avoid adding linear constraints that correspond to indicator constraints */
                  if ( strncmp(SCIPconsGetName(cons), "indlin", 6) != 0 )
                  {
                     SCIP_CALL( addAltLPConstraint(scip, conshdlr, cons, NULL, 0.0, &colindex) );
                     SCIPdebugMsg(scip, "Added column for linear constraint <%s> to alternative LP with column index %d.\n", SCIPconsGetName(cons), colindex);
                     ++cnt;
                  }
               }
            }
            SCIPdebugMsg(scip, "Added %d additional columns from linear constraints to alternative LP.\n", cnt);
         }
      }
   }
 
   /* initialize event handler if restart should be forced */
   if ( conshdlrdata->forcerestart )
   {
      SCIP_Bool* covered;
      SCIP_VAR** vars;
      int nvars;
      int j;
 
      assert( conshdlrdata->eventhdlrrestart != NULL );
 
      /* store number of initial constraints */
      conshdlrdata->ninitconss = SCIPconshdlrGetNActiveConss(conshdlr);
 
      /* reset number of fixed binary variables */
      conshdlrdata->nbinvarszero = 0;
 
      /* loop through variables */
      nvars = SCIPgetNVars(scip);
      vars = SCIPgetVars(scip);
 
      conshdlrdata->objindicatoronly = FALSE;
      conshdlrdata->minabsobj = SCIP_REAL_MAX;
 
      /* unmark all variables */
      SCIP_CALL( SCIPallocBufferArray(scip, &covered, nvars) );
      for (j = 0; j < nvars; ++j)
         covered[j] = FALSE;
 
      /* mark indicator variables */
      for (c = 0; c < nconss; ++c)
      {
         SCIP_CONSDATA* consdata;
         int probindex;
 
         assert( conss != NULL );
         assert( conss[c] != NULL );
 
         /* avoid non-active indicator constraints */
         if ( ! SCIPconsIsActive(conss[c]) )
            continue;
 
         consdata = SCIPconsGetData(conss[c]);
         assert( consdata != NULL );
         assert( consdata->binvar != NULL );
 
         if ( SCIPvarIsNegated(consdata->binvar) )
         {
            assert( SCIPvarGetNegatedVar(consdata->binvar) != NULL );
            probindex = SCIPvarGetProbindex(SCIPvarGetNegatedVar(consdata->binvar));
         }
         else
            probindex = SCIPvarGetProbindex(consdata->binvar);
 
         /* if presolving detected infeasibility it might be that the binary variables are not active */
         if ( probindex < 0 )
            continue;
 
         assert( 0 <= probindex && probindex < nvars );
         covered[probindex] = TRUE;
      }
 
      /* check all variables */
      for (j = 0; j < nvars; ++j)
      {
         SCIP_Real obj;
 
         obj = SCIPvarGetObj(vars[j]);
         if ( ! SCIPisZero(scip, obj) )
         {
            if ( ! covered[j] )
               break;
            if ( ! SCIPisIntegral(scip, obj) )
               break;
            if ( REALABS(obj) < conshdlrdata->minabsobj )
               conshdlrdata->minabsobj = REALABS(obj);
         }
      }
 
      /* if all variables have integral objective and only indicator variables have nonzero objective */
      if ( j >= nvars )
      {
         /* if there are variables with nonzero objective */
         if ( conshdlrdata->minabsobj < SCIP_REAL_MAX )
         {
            assert( SCIPisIntegral(scip, conshdlrdata->minabsobj) );
            assert( SCIPisGE(scip, conshdlrdata->minabsobj, 1.0) );
 
            conshdlrdata->objindicatoronly = TRUE;
 
            assert( conshdlrdata->eventhdlrrestart != NULL );
            SCIP_CALL( SCIPcatchEvent(scip, SCIP_EVENTTYPE_BESTSOLFOUND, conshdlrdata->eventhdlrrestart, (SCIP_EVENTDATA*) conshdlrdata, NULL) );
         }
      }
 
      SCIPfreeBufferArray(scip, &covered);
   }
 
   return SCIP_OKAY;
}
 
 
/** solving process deinitialization method of constraint handler (called before branch and bound process data is freed) */
static
SCIP_DECL_CONSEXITSOL(consExitsolIndicator)
{  /*lint --e{715}*/
   SCIP_CONSHDLRDATA* conshdlrdata;
   int c;
 
   assert( scip != NULL );
   assert( conshdlr != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
 
   if ( conshdlrdata->sepaalternativelp )
   {
      if ( conshdlrdata->slackhash != NULL )
      {
#ifdef SCIP_DEBUG
         SCIPinfoMessage(scip, NULL, "\nStatistics for cons_indicator slack hash:\n");
         SCIPhashmapPrintStatistics(conshdlrdata->slackhash, SCIPgetMessagehdlr(scip));
#endif
         SCIPhashmapFree(&conshdlrdata->slackhash);
      }
 
      if ( conshdlrdata->altlp != NULL )
      {
         assert( conshdlrdata->varhash != NULL );
         assert( conshdlrdata->lbhash != NULL );
         assert( conshdlrdata->ubhash != NULL );
 
#ifdef SCIP_DEBUG
         SCIPinfoMessage(scip, NULL, "\nStatistics for cons_indicator var hash:\n");
         SCIPhashmapPrintStatistics(conshdlrdata->varhash, SCIPgetMessagehdlr(scip));
         SCIPinfoMessage(scip, NULL, "\nStatistics for cons_indicator lower bound hash:\n");
         SCIPhashmapPrintStatistics(conshdlrdata->lbhash, SCIPgetMessagehdlr(scip));
         SCIPinfoMessage(scip, NULL, "\nStatistics for cons_indicator upper bound hash:\n");
         SCIPhashmapPrintStatistics(conshdlrdata->ubhash, SCIPgetMessagehdlr(scip));
#endif
 
         SCIPhashmapFree(&conshdlrdata->varhash);
         SCIPhashmapFree(&conshdlrdata->lbhash);
         SCIPhashmapFree(&conshdlrdata->ubhash);
 
         SCIP_CALL( SCIPlpiFree(&conshdlrdata->altlp) );
 
         /* save the information that the columns have been deleted */
         for (c = 0; c < nconss; ++c)
         {
            SCIP_CONSDATA* consdata;
 
            assert( conss != NULL );
            assert( conss[c] != NULL );
 
            consdata = SCIPconsGetData(conss[c]);
            assert( consdata != NULL );
            consdata->colindex = -1;
         }
      }
   }
   else
   {
      assert( conshdlrdata->slackhash == NULL );
      assert( conshdlrdata->varhash == NULL );
      assert( conshdlrdata->lbhash == NULL );
      assert( conshdlrdata->ubhash == NULL );
   }
 
   return SCIP_OKAY;
}
 
 
/** frees specific constraint data */
static
SCIP_DECL_CONSDELETE(consDeleteIndicator)
{
   assert( scip != NULL );
   assert( conshdlr != NULL );
   assert( cons != NULL );
   assert( consdata != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
#ifdef SCIP_MORE_DEBUG
   SCIPdebugMsg(scip, "Deleting indicator constraint <%s>.\n", SCIPconsGetName(cons) );
#endif
 
   /* Make sure that the hash for binary variables is freed. If we read a problem and then another problem without
    * solving (transforming) between, then no callback of constraint handlers are called. Thus, we cannot easily free the
    * hash map there. */
   if ( SCIPconshdlrGetNConss(conshdlr) == 0 )
   {
      SCIP_CONSHDLRDATA* conshdlrdata;
 
      /* get constraint handler data */
      conshdlrdata = SCIPconshdlrGetData(conshdlr);
      assert( conshdlrdata != NULL );
 
      if ( conshdlrdata->binslackvarhash != NULL )
         SCIPhashmapFree(&conshdlrdata->binslackvarhash);
   }
 
   /* drop events on transformed variables */
   if ( SCIPconsIsTransformed(cons) )
   {
      SCIP_CONSHDLRDATA* conshdlrdata;
 
      /* get constraint handler data */
      conshdlrdata = SCIPconshdlrGetData(conshdlr);
      assert( conshdlrdata != NULL );
 
      if ( conshdlrdata->sepaalternativelp )
      {
         SCIP_CALL( deleteAltLPConstraint(scip, conshdlr, cons) );
      }
 
      assert( (*consdata)->slackvar != NULL );
      assert( (*consdata)->binvar != NULL );
 
      /* free events only in correct stages */
      if ( SCIPgetStage(scip) >= SCIP_STAGE_TRANSFORMING && SCIPgetStage(scip) <= SCIP_STAGE_EXITSOLVE )
      {
         if ( (*consdata)->linconsactive )
         {
            assert( conshdlrdata->eventhdlrbound != NULL );
            SCIP_CALL( SCIPdropVarEvent(scip, (*consdata)->binvar, SCIP_EVENTTYPE_BOUNDCHANGED, conshdlrdata->eventhdlrbound,
                  (SCIP_EVENTDATA*) cons, -1) );
            SCIP_CALL( SCIPdropVarEvent(scip, (*consdata)->slackvar, SCIP_EVENTTYPE_BOUNDCHANGED, conshdlrdata->eventhdlrbound,
                  (SCIP_EVENTDATA*) cons, -1) );
         }
         if ( conshdlrdata->forcerestart )
         {
            assert( conshdlrdata->eventhdlrrestart != NULL );
            SCIP_CALL( SCIPdropVarEvent(scip, (*consdata)->binvar, SCIP_EVENTTYPE_GBDCHANGED, conshdlrdata->eventhdlrrestart,
                  (SCIP_EVENTDATA*) conshdlrdata, -1) );
         }
 
         /* drop bound change events on variables of linear constraints */
         if ( conshdlrdata->linconsevents && (*consdata)->linconsactive && (*consdata)->varswithevents != NULL )
         {
            int j;
            assert( cons != NULL );
            assert( (*consdata)->eventtypes != NULL );
            assert( (*consdata)->lincons != NULL );
 
            for (j = 0; j < (*consdata)->nevents; ++j)
            {
               assert( !SCIPvarIsDeleted((*consdata)->varswithevents[j]) );
               SCIP_CALL( SCIPdropVarEvent(scip, (*consdata)->varswithevents[j], (*consdata)->eventtypes[j], conshdlrdata->eventhdlrlinconsbound, (SCIP_EVENTDATA*) conshdlrdata, -1) );
            }
            SCIPfreeBlockMemoryArray(scip, &(*consdata)->varswithevents, (*consdata)->nevents);
            SCIPfreeBlockMemoryArray(scip, &(*consdata)->eventtypes, (*consdata)->nevents);
 
            (*consdata)->nevents = 0;
            assert( (*consdata)->varswithevents == NULL );
            assert( (*consdata)->eventtypes == NULL );
         }
      }
   }
 
   /* Can there be cases where lincons is NULL, e.g., if presolve found the problem infeasible? */
   assert( (*consdata)->lincons != NULL );
 
   /* mark linear constraint to be upgrade-able */
   if ( SCIPconsIsActive((*consdata)->lincons) )
   {
      SCIPconsAddUpgradeLocks((*consdata)->lincons, -1);
      assert( SCIPconsGetNUpgradeLocks((*consdata)->lincons) == 0 );
   }
 
   /* release binary variable, slack variable, and linear constraint */
   if( (*consdata)->binvar != NULL )
   {
      SCIP_CALL( SCIPreleaseVar(scip, &(*consdata)->binvar) );
   }
   SCIP_CALL( SCIPreleaseVar(scip, &(*consdata)->slackvar) );
   SCIP_CALL( SCIPreleaseCons(scip, &(*consdata)->lincons) );
 
   SCIPfreeBlockMemory(scip, consdata);
 
   return SCIP_OKAY;
}
 
 
/** transforms constraint data into data belonging to the transformed problem */
static
SCIP_DECL_CONSTRANS(consTransIndicator)
{
   SCIP_CONSDATA* consdata;
   SCIP_CONSHDLRDATA* conshdlrdata;
   SCIP_CONSDATA* sourcedata;
   char s[SCIP_MAXSTRLEN];
 
   assert( scip != NULL );
   assert( conshdlr != NULL );
   assert( sourcecons != NULL );
   assert( targetcons != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   /* get constraint handler data */
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
   assert( conshdlrdata->eventhdlrbound != NULL );
 
#ifdef SCIP_MORE_DEBUG
   SCIPdebugMsg(scip, "Transforming indicator constraint: <%s>.\n", SCIPconsGetName(sourcecons) );
#endif
 
   /* get data of original constraint */
   sourcedata = SCIPconsGetData(sourcecons);
   assert( sourcedata != NULL );
   assert( sourcedata->binvar != NULL );
 
   /* check for slackvar */
   if ( sourcedata->slackvar == NULL )
   {
      SCIPerrorMessage("The indicator constraint <%s> needs a slack variable.\n", SCIPconsGetName(sourcecons));
      return SCIP_INVALIDDATA;
   }
 
   /* check for linear constraint */
   if ( sourcedata->lincons == NULL )
   {
      SCIPerrorMessage("The indicator constraint <%s> needs a linear constraint.\n", SCIPconsGetName(sourcecons));
      return SCIP_INVALIDDATA;
   }
   assert( sourcedata->lincons != NULL );
   assert( sourcedata->slackvar != NULL );
 
   /* create constraint data */
   consdata = NULL;
   /* Note that the constraint has activeone = TRUE, since the binary variable has been negated already if needed. */
   SCIP_CALL( consdataCreate(scip, conshdlr, conshdlrdata, SCIPconsGetName(sourcecons), &consdata, conshdlrdata->eventhdlrrestart,
         sourcedata->binvar, TRUE, sourcedata->lessthanineq, sourcedata->slackvar, sourcedata->lincons, sourcedata->linconsactive) );
   consdata->activeone = sourcedata->activeone;
   assert( consdata != NULL );
 
   /* capture binary variable, slack variable, and linear constraint */
   SCIP_CALL( SCIPcaptureVar(scip, consdata->binvar) );
   SCIP_CALL( SCIPcaptureVar(scip, consdata->slackvar) );
   SCIP_CALL( SCIPcaptureCons(scip, consdata->lincons) );
 
   /* create transformed constraint with the same flags */
   (void) SCIPsnprintf(s, SCIP_MAXSTRLEN, "t_%s", SCIPconsGetName(sourcecons));
   SCIP_CALL( SCIPcreateCons(scip, targetcons, s, conshdlr, consdata,
         SCIPconsIsInitial(sourcecons), SCIPconsIsSeparated(sourcecons),
         SCIPconsIsEnforced(sourcecons), SCIPconsIsChecked(sourcecons),
         SCIPconsIsPropagated(sourcecons), SCIPconsIsLocal(sourcecons),
         SCIPconsIsModifiable(sourcecons), SCIPconsIsDynamic(sourcecons),
         SCIPconsIsRemovable(sourcecons), SCIPconsIsStickingAtNode(sourcecons)) );
 
   /* catch local bound change events on binary variable */
   if ( sourcedata->linconsactive )
   {
      assert( SCIPisTransformed(scip) );
      SCIP_CALL( SCIPcatchVarEvent(scip, consdata->binvar, SCIP_EVENTTYPE_BOUNDCHANGED, conshdlrdata->eventhdlrbound, (SCIP_EVENTDATA*) *targetcons, NULL) );
      SCIP_CALL( SCIPcatchVarEvent(scip, consdata->slackvar, SCIP_EVENTTYPE_BOUNDCHANGED, conshdlrdata->eventhdlrbound, (SCIP_EVENTDATA*) *targetcons, NULL) );
   }
 
   /* make sure that binary variable hash exists */
   if ( conshdlrdata->sepaalternativelp )
   {
      if ( conshdlrdata->binvarhash == NULL )
      {
         SCIP_CALL( SCIPhashmapCreate(&conshdlrdata->binvarhash, SCIPblkmem(scip), SCIPgetNOrigVars(scip)) );
      }
 
      /* check whether binary variable is present: note that a binary variable might appear several times, but this seldomly happens. */
      assert( conshdlrdata->binvarhash != NULL );
      if ( ! SCIPhashmapExists(conshdlrdata->binvarhash, (void*) consdata->binvar) )
      {
         SCIP_CALL( SCIPhashmapInsert(conshdlrdata->binvarhash, (void*) consdata->binvar, (void*) (*targetcons)) );
      }
   }
 
   return SCIP_OKAY;
}
 
 
/** presolving initialization method of constraint handler (called when presolving is about to begin) */
static
SCIP_DECL_CONSINITPRE(consInitpreIndicator)
{  /*lint --e{715}*/
   SCIP_CONSHDLRDATA* conshdlrdata;
   int c;
 
   assert( scip != NULL );
   assert( conshdlr != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   if ( SCIPgetStatus(scip) != SCIP_STATUS_UNKNOWN )
      return SCIP_OKAY;
 
   SCIPdebugMsg(scip, "Initpre method for indicator constraints.\n");
 
   /* check each constraint and get transformed linear constraint */
   for (c = 0; c < nconss; ++c)
   {
      SCIP_CONSDATA* consdata;
 
      assert( conss != NULL );
      assert( conss[c] != NULL );
      assert( SCIPconsIsTransformed(conss[c]) );
 
      consdata = SCIPconsGetData(conss[c]);
      assert( consdata != NULL );
 
      /* if not happened already, get transformed linear constraint */
      assert( consdata->lincons != NULL );
 
      SCIP_STRINGEQ( SCIPconshdlrGetName(SCIPconsGetHdlr(consdata->lincons)), "linear", SCIP_INVALIDCALL );
 
      /* in a restart the linear constraint might already be transformed */
      if ( ! SCIPconsIsTransformed(consdata->lincons) )
      {
         SCIP_CONS* translincons;
 
         SCIP_CALL( SCIPgetTransformedCons(scip, consdata->lincons, &translincons) );
         assert( translincons != NULL );
 
         SCIP_CALL( SCIPreleaseCons(scip, &consdata->lincons) );
         SCIP_CALL( SCIPcaptureCons(scip, translincons) );
         consdata->lincons = translincons;
      }
   }
 
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
 
   /* reset flag, in case presolve was called for some problem before */
   conshdlrdata->addedcouplingcons = FALSE;
 
   return SCIP_OKAY;
}
 
 
/** presolving method of constraint handler
 *
 *  For an indicator constraint with binary variable \f$y\f$ and slack variable \f$s\f$ the coupling
 *  inequality \f$s \le M (1-y)\f$ (equivalently: \f$s + M y \le M\f$) is inserted, where \f$M\f$ is
 *  an upper bound on the value of \f$s\f$. If \f$M\f$ is too large the inequality is not
 *  inserted. Depending on the parameter @a addcouplingcons we add a variable upper bound or a row
 *  (in consInitlpIndicator()).
 *
 *  @warning We can never delete linear constraints, because we need them to get the right values
 *  for the slack variables!
 */
static
SCIP_DECL_CONSPRESOL(consPresolIndicator)
{  /*lint --e{715}*/
   SCIP_CONSHDLRDATA* conshdlrdata;
   SCIP_Bool noReductions;
   SCIPdebug( int oldnfixedvars = *nfixedvars; )
   SCIPdebug( int oldndelconss = *ndelconss; )
   int c;
 
   assert( scip != NULL );
   assert( conshdlr != NULL );
   assert( result != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   *result = SCIP_DIDNOTRUN;
 
   /* get constraint handler data */
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
 
   SCIPdebugMsg(scip, "Presolving indicator constraints.\n");
 
   /* only run if success is possible */
   if ( nrounds == 0 || nnewfixedvars > 0 || nnewchgbds > 0 || nnewaggrvars > 0 )
   {
      *result = SCIP_DIDNOTFIND;
 
      /* check each constraint */
      for (c = 0; c < nconss; ++c)
      {
         SCIP_CONSDATA* consdata;
         SCIP_CONS* cons;
         SCIP_Bool success;
         SCIP_Bool cutoff;
 
         assert( conss != NULL );
         assert( conss[c] != NULL );
         cons = conss[c];
         consdata = SCIPconsGetData(cons);
         assert( consdata != NULL );
         assert( consdata->binvar != NULL );
         assert( ! SCIPconsIsModifiable(cons) );
 
#ifdef SCIP_MORE_DEBUG
         SCIPdebugMsg(scip, "Presolving indicator constraint <%s>.\n", SCIPconsGetName(cons) );
#endif
 
         /* do nothing if the linear constraint is not active */
         if ( ! consdata->linconsactive )
            continue;
 
         assert( consdata->lincons != NULL );
         assert( consdata->slackvar != NULL );
         assert( SCIPconsIsTransformed(consdata->lincons) );
 
         SCIP_STRINGEQ( SCIPconshdlrGetName(SCIPconsGetHdlr(consdata->lincons)), "linear", SCIP_INVALIDCALL );
 
         /* add implications if not yet done */
         if ( ! consdata->implicationadded )
         {
            int nbnds = 0;
            SCIP_CALL( SCIPaddVarImplication(scip, consdata->binvar, TRUE, consdata->slackvar, SCIP_BOUNDTYPE_UPPER, 0.0,
                  &cutoff, &nbnds) );
            *nchgbds += nbnds;
 
            /* cutoff/infeasible might be true if preprocessing was truncated */
            /* note: nbdchgs == 0 is not necessarily true, because preprocessing might be truncated. */
            consdata->implicationadded = TRUE;
            if ( cutoff )
            {
               *result = SCIP_CUTOFF;
               return SCIP_OKAY;
            }
         }
 
         /* determine integrality of slack variable if not yet done */
         if ( !consdata->slacktypechecked )
         {
            consdata->slacktypechecked = TRUE;
            if ( !SCIPvarIsImpliedIntegral(consdata->slackvar) )
            {
               SCIP_Real* vals;
               SCIP_VAR** vars;
               SCIP_VAR* slackvar;
               SCIP_Bool foundslackvar = FALSE;
               int nvars;
               int j;
 
               assert( consdata->lincons != NULL );
               vars = SCIPgetVarsLinear(scip, consdata->lincons);
               vals = SCIPgetValsLinear(scip, consdata->lincons);
               nvars = SCIPgetNVarsLinear(scip, consdata->lincons);
               slackvar = consdata->slackvar;
               assert( slackvar != NULL );
 
               for (j = 0; j < nvars; ++j)
               {
                  if ( vars[j] == slackvar )
                     foundslackvar = TRUE;
                  else
                  {
                     if ( ! SCIPvarIsIntegral(vars[j]) || ! SCIPisIntegral(scip, vals[j]))
                        break;
                  }
               }
               /* something is strange if the slack variable does not appear in the linear constraint (possibly because it is an artificial constraint) */
               if ( j == nvars && foundslackvar )
               {
                  SCIP_Real lb;
                  SCIP_Real ub;
 
                  lb = SCIPvarGetLbGlobal(consdata->slackvar);
                  ub = SCIPvarGetUbGlobal(consdata->slackvar);
                  if ( (SCIPisInfinity(scip, -lb) || SCIPisIntegral(scip, lb)) && (SCIPisInfinity(scip, ub) || SCIPisIntegral(scip, ub)) )
                  {
                     SCIP_Bool infeasible;
 
                     SCIP_CALL( SCIPchgVarImplType(scip, consdata->slackvar, SCIP_IMPLINTTYPE_WEAK, &infeasible) );
                     /* don't assert feasibility here because the presolver should detect infeasibility */
                  }
                  else
                  {
                     /* it can happen that the bounds of the slack variable have been changed to be non-integral in
                      * previous presolving steps. We then might get a problem with tightening the bounds. In this case,
                      * we just leave the slack variable to be continuous */
                     SCIPdebugMsg(scip, "Cannot declare slack variable (<%s>) weakly implied integral, since global bound is non-integral: (%g, %g).\n",
                        SCIPvarGetName(consdata->slackvar), SCIPvarGetLbGlobal(consdata->slackvar), SCIPvarGetUbGlobal(consdata->slackvar));
                  }
               }
            }
         }
 
         /* perform one presolving round */
         SCIP_CALL( presolRoundIndicator(scip, conshdlrdata, cons, consdata,
               conshdlrdata->dualreductions && SCIPallowStrongDualReds(scip), &cutoff, &success, ndelconss, nfixedvars) );
 
         if ( cutoff )
         {
            *result = SCIP_CUTOFF;
            return SCIP_OKAY;
         }
         if ( success )
            *result = SCIP_SUCCESS;
      }
   }
 
   /* determine whether other methods have found reductions */
   noReductions = nnewfixedvars == 0 && nnewaggrvars == 0 && nnewchgvartypes == 0 && nnewchgbds == 0
      && nnewdelconss == 0 && nnewchgcoefs == 0 && nnewchgsides == 0;
 
   /* add variable upper bounds after bounds are likely to be strengthened */
   if ( noReductions && *result != SCIP_SUCCESS && conshdlrdata->addcouplingcons && ! conshdlrdata->addedcouplingcons )
   {
      int ngen;
 
      /* create variable upper bounds, possibly removing indicator constraints */
      SCIP_CALL( createVarUbs(scip, conshdlrdata, conss, nconss, &ngen) );
 
      if ( ngen > 0 )
      {
         *result = SCIP_SUCCESS;
         *nupgdconss += ngen;
         if ( conshdlrdata->removeindicators )
            *ndelconss += ngen;
      }
      conshdlrdata->addedcouplingcons = TRUE;
   }
 
   SCIPdebug( SCIPdebugMsg(scip, "Presolved %d constraints (fixed %d variables, removed 0 variables, and deleted %d constraints).\n",
      nconss, *nfixedvars - oldnfixedvars, *ndelconss - oldndelconss); )
 
   return SCIP_OKAY; /*lint !e438*/
}
 
 
/** LP initialization method of constraint handler (called before the initial LP relaxation at a node is solved)
 *
 *  For an indicator constraint with binary variable \f$y\f$ and slack variable \f$s\f$ the coupling
 *  inequality \f$s \le M (1-y)\f$ (equivalently: \f$s + M y \le M\f$) is inserted, where \f$M\f$ is
 *  an upper bound on the value of \f$s\f$. If \f$M\f$ is too large the inequality is not inserted.
 */
static
SCIP_DECL_CONSINITLP(consInitlpIndicator)
{
   int c;
   SCIP_CONSHDLRDATA* conshdlrdata;
 
   assert( scip != NULL );
   assert( conshdlr != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
 
   *infeasible = FALSE;
 
   /* check whether coupling constraints should be added */
   if ( ! conshdlrdata->addcoupling )
      return SCIP_OKAY;
 
   /* check whether coupling constraints have been added already */
   if ( conshdlrdata->addcouplingcons && conshdlrdata->addedcouplingcons )
      return SCIP_OKAY;
 
   SCIPdebugMsg(scip, "Handle initial rows for %d indicator constraints.\n", nconss);
 
   /* check each constraint */
   for (c = 0; c < nconss && !(*infeasible); ++c)
   {
      SCIP_CONSDATA* consdata;
      SCIP_Real ub;
 
      assert( conss != NULL );
      assert( conss[c] != NULL );
      consdata = SCIPconsGetData(conss[c]);
      assert( consdata != NULL );
 
      /* do not add inequalities if there are no linear constraints (no slack variable available) */
      if ( ! consdata->linconsactive )
         continue;
 
      /* get upper bound for slack variable in linear constraint */
      ub = SCIPvarGetUbGlobal(consdata->slackvar);
      assert( ! SCIPisNegative(scip, ub) );
 
      /* insert corresponding row if helpful and coefficient is not too large */
      if ( ub <= conshdlrdata->maxcouplingvalue )
      {
         char name[50];
 
#ifndef NDEBUG
         (void) SCIPsnprintf(name, 50, "couple%d", c);
#else
         name[0] = '\0';
#endif
 
         /* add variable upper bound if required */
         if ( conshdlrdata->addcouplingcons )
         {
            SCIP_CONS* cons;
 
            assert( ! conshdlrdata->addedcouplingcons );
 
            SCIPdebugMsg(scip, "Insert coupling varbound constraint for indicator constraint <%s> (coeff: %f).\n", SCIPconsGetName(conss[c]), ub);
 
            SCIP_CALL( SCIPcreateConsVarbound(scip, &cons, name, consdata->slackvar, consdata->binvar, ub, -SCIPinfinity(scip), ub,
                  TRUE, TRUE, TRUE, FALSE, TRUE, FALSE, FALSE, TRUE, TRUE, FALSE) );
 
            SCIP_CALL( SCIPaddCons(scip, cons) );
            SCIP_CALL( SCIPreleaseCons(scip, &cons) );
         }
         else
         {
            SCIP_ROW* row;
 
            SCIP_CALL( SCIPcreateEmptyRowCons(scip, &row, conss[c], name, -SCIPinfinity(scip), ub, FALSE, FALSE, FALSE) );
            SCIP_CALL( SCIPcacheRowExtensions(scip, row) );
 
            SCIP_CALL( SCIPaddVarToRow(scip, row, consdata->slackvar, 1.0) );
            SCIP_CALL( SCIPaddVarToRow(scip, row, consdata->binvar, ub) );
            SCIP_CALL( SCIPflushRowExtensions(scip, row) );
 
            SCIPdebugMsg(scip, "Insert coupling inequality for indicator constraint <%s> (coeff: %f).\n", SCIPconsGetName(conss[c]), ub);
#ifdef SCIP_OUTPUT
            SCIP_CALL( SCIPprintRow(scip, row, NULL) );
#endif
            SCIP_CALL( SCIPaddRow(scip, row, FALSE, infeasible) );
            SCIP_CALL( SCIPreleaseRow(scip, &row) );
         }
      }
   }
 
   return SCIP_OKAY;
}
 
 
/** separation method of constraint handler for LP solutions */
static
SCIP_DECL_CONSSEPALP(consSepalpIndicator)
{  /*lint --e{715}*/
   assert( scip != NULL );
   assert( conshdlr != NULL );
   assert( conss != NULL );
   assert( result != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   /* perform separation */
   SCIP_CALL( separateIndicators(scip, conshdlr, nconss, nusefulconss, conss, NULL, SCIP_TYPE_SEPALP, result) );
 
   return SCIP_OKAY;
}
 
 
/** separation method of constraint handler for arbitrary primal solutions */
static
SCIP_DECL_CONSSEPASOL(consSepasolIndicator)
{  /*lint --e{715}*/
   assert( scip != NULL );
   assert( conshdlr != NULL );
   assert( conss != NULL );
   assert( result != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   /* perform separation */
   SCIP_CALL( separateIndicators(scip, conshdlr, nconss, nusefulconss, conss, sol, SCIP_TYPE_SEPASOL, result) );
 
   return SCIP_OKAY;
}
 
 
/** constraint enforcing method of constraint handler for LP solutions */
static
SCIP_DECL_CONSENFOLP(consEnfolpIndicator)
{  /*lint --e{715}*/
   SCIP_CONSHDLRDATA* conshdlrdata;
 
   assert( scip != NULL );
   assert( conshdlr != NULL );
   assert( conss != NULL );
   assert( result != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   if ( solinfeasible )
   {
      *result = SCIP_FEASIBLE;
      return SCIP_OKAY;
   }
 
   /* get constraint handler data */
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
 
   SCIP_CALL( enforceIndicators(scip, conshdlr, nconss, conss, NULL, SCIP_TYPE_ENFOLP, conshdlrdata->genlogicor, result) );
 
   return SCIP_OKAY;
}
 
 
/** constraint enforcing method of constraint handler for relaxation solutions */
static
SCIP_DECL_CONSENFORELAX(consEnforelaxIndicator)
{  /*lint --e{715}*/
   SCIP_CONSHDLRDATA* conshdlrdata;
 
   assert( scip != NULL );
   assert( conshdlr != NULL );
   assert( conss != NULL );
   assert( result != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   if ( solinfeasible )
   {
      *result = SCIP_FEASIBLE;
      return SCIP_OKAY;
   }
 
   /* get constraint handler data */
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
 
   SCIP_CALL( enforceIndicators(scip, conshdlr, nconss, conss, sol, SCIP_TYPE_ENFORELAX, conshdlrdata->genlogicor, result) );
 
   return SCIP_OKAY;
}
 
 
/** constraint enforcing method of constraint handler for pseudo solutions */
static
SCIP_DECL_CONSENFOPS(consEnfopsIndicator)
{  /*lint --e{715}*/
   assert( scip != NULL );
   assert( conshdlr != NULL );
   assert( conss != NULL );
   assert( result != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   if ( solinfeasible )
   {
      *result = SCIP_FEASIBLE;
      return SCIP_OKAY;
   }
 
   if ( objinfeasible )
   {
      *result = SCIP_DIDNOTRUN;
      return SCIP_OKAY;
   }
 
   SCIP_CALL( enforceIndicators(scip, conshdlr, nconss, conss, NULL, SCIP_TYPE_ENFOPS, TRUE, result) );
 
   return SCIP_OKAY;
}
 
 
/** feasibility check method of constraint handler for integral solutions */
static
SCIP_DECL_CONSCHECK(consCheckIndicator)
{  /*lint --e{715}*/
   SCIP_SOL* trysol = NULL;
   SCIP_CONSHDLRDATA* conshdlrdata;
   SCIP_Bool someLinconsNotActive;
   SCIP_Bool changedSol;
   int c;
 
   assert( scip != NULL );
   assert( conshdlr != NULL );
   assert( conss != NULL );
   assert( result != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   SCIPdebugMsg(scip, "Checking %d indicator constraints <%s>.\n", nconss, SCIPconshdlrGetName(conshdlr) );
 
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
 
   /* try to repair solution below, if it makes sense (will send solution to trysol heuristic in any case (see below) */
   if ( SCIPgetStage(scip) > SCIP_STAGE_PROBLEM && SCIPgetStage(scip) < SCIP_STAGE_SOLVED && conshdlrdata->trysolutions && conshdlrdata->heurtrysol != NULL )
   {
      SCIP_CALL( SCIPcreateSolCopy(scip, &trysol, sol) );
      assert( trysol != NULL );
   }
 
   /* check each constraint */
   *result = SCIP_FEASIBLE;
   changedSol = FALSE;
   someLinconsNotActive = FALSE;
   for (c = 0; c < nconss; ++c)
   {
      SCIP_CONSDATA* consdata;
 
      assert( conss[c] != NULL );
      consdata = SCIPconsGetData(conss[c]);
      assert( consdata != NULL );
      assert( consdata->binvar != NULL );
 
      /* if the linear constraint has not been generated, we do nothing */
      if ( ! consdata->linconsactive )
      {
         someLinconsNotActive = TRUE;
         continue;
      }
 
      assert( consdata->slackvar != NULL );
      /* if printreason is true it can happen that non-integral solutions are checked */
      assert( checkintegrality || SCIPisFeasIntegral(scip, SCIPgetSolVal(scip, sol, consdata->binvar)) );
 
      /* if constraint is infeasible */
      if ( ! SCIPisFeasZero(scip, SCIPgetSolVal(scip, sol, consdata->binvar)) &&
           ! SCIPisFeasZero(scip, SCIPgetSolVal(scip, sol, consdata->slackvar)) )
      {
         SCIP_Real absviol = REALABS(SCIPgetSolVal(scip, sol, consdata->slackvar));
         SCIP_Real relviol = SCIPrelDiff(absviol, 0.0);
 
         if( sol != NULL )
            SCIPupdateSolConsViolation(scip, sol, absviol, relviol);
 
         SCIP_CALL( SCIPresetConsAge(scip, conss[c]) );
         *result = SCIP_INFEASIBLE;
 
         if ( printreason )
         {
            SCIP_CALL( SCIPprintCons(scip, conss[c], NULL) );
            SCIPinfoMessage(scip, NULL, ";\nviolation:  <%s> = %g and <%s> = %.15g\n",
               SCIPvarGetName(consdata->binvar), SCIPgetSolVal(scip, sol, consdata->binvar),
               SCIPvarGetName(consdata->slackvar), SCIPgetSolVal(scip, sol, consdata->slackvar));
         }
 
         /* try to make solution feasible if it makes sense - otherwise exit */
         if ( trysol != NULL )
         {
            SCIP_Bool changed;
            SCIP_CALL( SCIPmakeIndicatorFeasible(scip, conss[c], trysol, &changed) );
            changedSol = changedSol || changed;
         }
         else
         {
            SCIPdebugMsg(scip, "Indicator constraint %s is not feasible.\n", SCIPconsGetName(conss[c]));
 
            if ( ! completely )
               return SCIP_OKAY;
         }
      }
      else
      {
         if ( trysol != NULL )
         {
            SCIP_Bool changed;
            SCIP_CALL( SCIPmakeIndicatorFeasible(scip, conss[c], trysol, &changed) );
            changedSol = changedSol || changed;
         }
      }
   }
 
   /* if some linear constraints are not active, we need to check feasibility via the alternative polyhedron */
   if ( someLinconsNotActive )
   {
      SCIP_LPI* lp;
      SCIP_Bool infeasible;
      SCIP_Bool error;
      SCIP_Bool* S;
 
      lp = conshdlrdata->altlp;
      assert( conshdlrdata->sepaalternativelp );
 
      /* the check maybe called before we have build the alternative polyhedron -> return SCIP_INFEASIBLE */
      if ( lp != NULL )
      {
#ifndef NDEBUG
         SCIP_CALL( checkLPBoundsClean(scip, lp, nconss, conss) );
#endif
 
         /* change coefficients of bounds in alternative LP */
         if ( conshdlrdata->updatebounds )
         {
            SCIP_CALL( updateFirstRowGlobal(scip, conshdlrdata) );
         }
 
         /* scale first row if necessary */
         SCIP_CALL( scaleFirstRow(scip, conshdlrdata) );
 
         /* set objective function to current solution */
         SCIP_CALL( setAltLPObjZero(scip, lp, nconss, conss) );
 
         SCIP_CALL( SCIPallocBufferArray(scip, &S, nconss) );
 
         /* set up variables fixed to 1 */
         for (c = 0; c < nconss; ++c)
         {
            SCIP_CONSDATA* consdata;
 
            assert( conss[c] != NULL );
            consdata = SCIPconsGetData(conss[c]);
            assert( consdata != NULL );
 
            /* if printreason is true it can happen that non-integral solutions are checked */
            assert( checkintegrality || SCIPisFeasIntegral(scip, SCIPgetSolVal(scip, sol, consdata->binvar)) );
            if ( SCIPisFeasZero(scip, SCIPgetSolVal(scip, sol, consdata->binvar)) )
               S[c] = TRUE;
            else
               S[c] = FALSE;
         }
 
         /* fix the variables in S */
         SCIP_CALL( fixAltLPVariables(scip, lp, nconss, conss, S) );
 
         /* check feasibility */
         SCIP_CALL_PARAM( SCIPlpiSetIntpar(lp, SCIP_LPPAR_FROMSCRATCH, TRUE) );
         SCIP_CALL( checkAltLPInfeasible(scip, lp, conshdlrdata->maxconditionaltlp, TRUE, &infeasible, &error) );
         SCIP_CALL_PARAM( SCIPlpiSetIntpar(lp, SCIP_LPPAR_FROMSCRATCH, FALSE) );
 
         if ( error )
            return SCIP_LPERROR;
 
         if ( ! infeasible )
            *result = SCIP_INFEASIBLE;
 
         /* reset bounds */
         SCIP_CALL( unfixAltLPVariables(scip, lp, nconss, conss, S) );
 
#ifndef NDEBUG
         SCIP_CALL( checkLPBoundsClean(scip, lp, nconss, conss) );
#endif
 
         SCIPfreeBufferArray(scip, &S);
      }
      else
         *result = SCIP_INFEASIBLE;
   }
   else
   {
      /* tell heur_trysol about solution - it will pass it to SCIP */
      if ( trysol != NULL && changedSol )
      {
         assert( conshdlrdata->heurtrysol != NULL );
         SCIP_CALL( SCIPheurPassSolTrySol(scip, conshdlrdata->heurtrysol, trysol) );
      }
   }
 
   if ( trysol != NULL )
      SCIP_CALL( SCIPfreeSol(scip, &trysol) );
 
   if ( *result == SCIP_INFEASIBLE )
   {
      SCIPdebugMsg(scip, "Indicator constraints are not feasible.\n");
      return SCIP_OKAY;
   }
 
   /* at this point we are feasible */
   SCIPdebugMsg(scip, "Indicator constraints are feasible.\n");
 
   return SCIP_OKAY;
}
 
 
/** domain propagation method of constraint handler */
static
SCIP_DECL_CONSPROP(consPropIndicator)
{  /*lint --e{715}*/
   SCIP_CONSHDLRDATA* conshdlrdata;
   SCIP_Bool dualreductions;
   int ngen = 0;
   int c;
 
   assert( scip != NULL );
   assert( conshdlr != NULL );
   assert( conss != NULL );
   assert( result != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   *result = SCIP_DIDNOTRUN;
 
   assert( SCIPisTransformed(scip) );
 
   SCIPdebugMsg(scip, "Start propagation of constraint handler <%s>.\n", SCIPconshdlrGetName(conshdlr));
 
   /* get constraint handler data */
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
 
   /* avoid propagation if no bound has changed */
   if ( ! conshdlrdata->boundhaschanged && ! SCIPinRepropagation(scip) && ! conshdlrdata->linconsboundschanged )
   {
      *result = SCIP_DIDNOTFIND;
      return SCIP_OKAY;
   }
 
   /* if first time called, add events on variables of linear constraint */
   if ( !conshdlrdata->linconsevents )
   {
      for (c = 0; c < nconss; ++c)
      {
         SCIP_CONSDATA* consdata;
         SCIP_VAR** vars;
         SCIP_Real* vals;
         int nvars;
         int j;
         assert( conss[c] != NULL );
 
         consdata = SCIPconsGetData(conss[c]);
         assert( consdata != NULL );
 
         /* if the linear constraint is not present, we continue */
         if ( ! consdata->linconsactive )
            continue;
 
         /* do not add events if upper bound of slackvar is already small */
         if ( SCIPvarGetUbLocal(consdata->slackvar) <= conshdlrdata->maxcouplingvalue )
            continue;
 
         /* do not add events if it is not a <= inequality; we do not propagate in this case */
         if ( SCIPisInfinity(scip, SCIPgetRhsLinear(scip, consdata->lincons) ) )
            continue;
 
         assert( consdata->lincons != NULL );
         vars = SCIPgetVarsLinear(scip, consdata->lincons);
         vals = SCIPgetValsLinear(scip, consdata->lincons);
         nvars = SCIPgetNVarsLinear(scip, consdata->lincons);
         assert( consdata->slackvar != NULL );
         assert( nvars != 0 );
 
         /* alloc memory to store events on variables of linear constraint; otherwise we can not drop the events when the cons is deleted */
         SCIP_CALL( SCIPallocBlockMemoryArray(scip, &consdata->varswithevents, nvars - 1) );
         SCIP_CALL( SCIPallocBlockMemoryArray(scip, &consdata->eventtypes, nvars - 1) );
 
         for (j = 0; j < nvars; ++j)
         {
            if ( vars[j] == consdata->slackvar )
               continue;
 
            /* catch only bound changes which are important for propagation of max activity to upper bound of slackvar */
            if ( vals[j] > 0.0 )
            {
               SCIP_CALL( SCIPcatchVarEvent(scip, vars[j], SCIP_EVENTTYPE_UBTIGHTENED, conshdlrdata->eventhdlrlinconsbound, (SCIP_EVENTDATA*) conshdlrdata, NULL) );
               consdata->varswithevents[consdata->nevents] = vars[j];
               consdata->eventtypes[consdata->nevents] = SCIP_EVENTTYPE_UBTIGHTENED;
               consdata->nevents++;
            }
            else
            {
               SCIP_CALL( SCIPcatchVarEvent(scip, vars[j], SCIP_EVENTTYPE_LBTIGHTENED, conshdlrdata->eventhdlrlinconsbound, (SCIP_EVENTDATA*) conshdlrdata, NULL) );
               consdata->varswithevents[consdata->nevents] = vars[j];
               consdata->eventtypes[consdata->nevents] = SCIP_EVENTTYPE_LBTIGHTENED;
               consdata->nevents++;
            }
         }
         assert( consdata->nevents == nvars - 1 );
      }
      conshdlrdata->linconsevents = TRUE;
   }
 
   /* already mark that no bound has changed */
   conshdlrdata->boundhaschanged = FALSE;
   conshdlrdata->linconsboundschanged = FALSE;
 
   dualreductions = conshdlrdata->dualreductions && SCIPallowStrongDualReds(scip);
 
   /* check each constraint */
   for (c = 0; c < nconss; ++c)
   {
      SCIP_CONS* cons;
      SCIP_CONSDATA* consdata;
      SCIP_Bool cutoff;
      int cnt;
 
      *result = SCIP_DIDNOTFIND;
 
      assert( conss[c] != NULL );
      cons = conss[c];
      consdata = SCIPconsGetData(cons);
      assert( consdata != NULL );
 
#ifdef SCIP_MORE_DEBUG
      SCIPdebugMsg(scip, "Propagating indicator constraint <%s>.\n", SCIPconsGetName(cons) );
#endif
 
      SCIP_CALL( propIndicator(scip, cons, consdata, conshdlrdata, dualreductions, conshdlrdata->addopposite, &cutoff, &cnt) );
 
      if ( cutoff )
      {
         *result = SCIP_CUTOFF;
         return SCIP_OKAY;
      }
      ngen += cnt;
   }
 
   SCIPdebugMsg(scip, "Propagated %d domains in constraint handler <%s>.\n", ngen, SCIPconshdlrGetName(conshdlr));
   if ( ngen > 0 )
      *result = SCIP_REDUCEDDOM;
 
   return SCIP_OKAY;
}
 
 
/** propagation conflict resolving method of constraint handler
 *
 *  We check which bound changes were the reason for infeasibility. We use that @a inferinfo is 0 if
 *  the binary variable has bounds that fix it to be nonzero (these bounds are the reason). Likewise
 *  @a inferinfo is 1 if the slack variable has bounds that fix it to be nonzero.
 */
static
SCIP_DECL_CONSRESPROP(consRespropIndicator)
{  /*lint --e{715}*/
   SCIP_CONSDATA* consdata;
 
   assert( scip != NULL );
   assert( cons != NULL );
   assert( infervar != NULL );
   assert( bdchgidx != NULL );
   assert( result != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   *result = SCIP_DIDNOTFIND;
   SCIPdebugMsg(scip, "Propagation resolution method of indicator constraint <%s>.\n", SCIPconsGetName(cons));
 
   consdata = SCIPconsGetData(cons);
   assert( consdata != NULL );
   assert( inferinfo == 0 || inferinfo == 1 || inferinfo == 2 || inferinfo == 3 );
   assert( consdata->linconsactive );
 
   /* if the binary variable was the reason */
   if ( inferinfo == 0 )
   {
      assert( SCIPgetVarLbAtIndex(scip, consdata->binvar, bdchgidx, FALSE) > 0.5 );
      assert( infervar != consdata->binvar );
 
      SCIP_CALL( SCIPaddConflictLb(scip, consdata->binvar, bdchgidx) );
   }
   else if ( inferinfo == 1 )
   {
      /* if the slack variable fixed to a positive value was the reason */
      assert( infervar != consdata->slackvar );
      /* Use a weaker comparison to SCIPgetVarLbAtIndex here (i.e., SCIPisPositive instead of SCIPisFeasPositive),
       * because SCIPgetVarLbAtIndex might differ from the local bound at time bdchgidx by epsilon. */
      assert( SCIPisPositive(scip, SCIPgetVarLbAtIndex(scip, consdata->slackvar, bdchgidx, FALSE)) );
      SCIP_CALL( SCIPaddConflictLb(scip, consdata->slackvar, bdchgidx) );
   }
   else if ( inferinfo == 2 )
   {
      assert( SCIPisFeasZero(scip, SCIPgetVarUbAtIndex(scip, consdata->slackvar, bdchgidx, FALSE)) );
      assert( SCIPconshdlrGetData(conshdlr)->dualreductions && SCIPallowStrongDualReds(scip) && SCIPallowWeakDualReds(scip) );
      SCIP_CALL( SCIPaddConflictUb(scip, consdata->slackvar, bdchgidx) );
   }
   else
   {
      SCIP_VAR** linconsvars;
      SCIP_Real* linconsvals;
      int nlinconsvars;
      int j;
 
      assert( inferinfo == 3 );
 
      /* mark variables in linear constraint */
      nlinconsvars = SCIPgetNVarsLinear(scip, consdata->lincons);
      linconsvars = SCIPgetVarsLinear(scip, consdata->lincons);
      linconsvals = SCIPgetValsLinear(scip, consdata->lincons);
 
      for (j = 0; j < nlinconsvars; ++j)
      {
         if ( linconsvals[j] > 0.0 )
         {
            assert( ! SCIPisInfinity(scip, SCIPgetVarUbAtIndex(scip, linconsvars[j], bdchgidx, FALSE)) );
            SCIP_CALL( SCIPaddConflictUb(scip, linconsvars[j], bdchgidx) );
         }
         else
         {
            assert( ! SCIPisInfinity(scip, -SCIPgetVarLbAtIndex(scip, linconsvars[j], bdchgidx, FALSE)) );
            SCIP_CALL( SCIPaddConflictLb(scip, linconsvars[j], bdchgidx) );
         }
      }
   }
 
   *result = SCIP_SUCCESS;
 
   return SCIP_OKAY;
}
 
 
/** variable rounding lock method of constraint handler
 *
 *  The up-rounding of the binary and slack variable may violate the constraint. If the linear
 *  constraint is not active, we lock all variables in the depending constraint - otherwise they
 *  will be fixed by dual presolving methods.
 */
static
SCIP_DECL_CONSLOCK(consLockIndicator)
{
   SCIP_CONSDATA* consdata;
 
   assert( scip != NULL );
   assert( conshdlr != NULL );
   assert( cons != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   consdata = SCIPconsGetData(cons);
   assert( consdata != NULL );
   assert( consdata->binvar != NULL );
 
#ifdef SCIP_MORE_DEBUG
   SCIPdebugMsg(scip, "%socking constraint <%s>.\n", (nlocksneg < 0) || (nlockspos < 0) ? "Unl" : "L", SCIPconsGetName(cons));
#endif
 
   SCIP_CALL( SCIPaddVarLocksType(scip, consdata->binvar, locktype, nlocksneg, nlockspos) );
 
   if ( consdata->linconsactive )
   {
      assert( consdata->slackvar != NULL );
 
      SCIP_CALL( SCIPaddVarLocksType(scip, consdata->slackvar, locktype, nlocksneg, nlockspos) );
   }
   else
   {
      SCIP_VAR** linvars;
      SCIP_Real* linvals;
      SCIP_Bool haslhs;
      SCIP_Bool hasrhs;
      int nlinvars;
      int j;
 
      assert( consdata->lincons != NULL );
      assert( consdata->slackvar == NULL );
 
      nlinvars = SCIPgetNVarsLinear(scip, consdata->lincons);
      linvars = SCIPgetVarsLinear(scip, consdata->lincons);
      linvals = SCIPgetValsLinear(scip, consdata->lincons);
      haslhs = ! SCIPisInfinity(scip, REALABS(SCIPgetLhsLinear(scip, consdata->lincons)));
      hasrhs = ! SCIPisInfinity(scip, REALABS(SCIPgetRhsLinear(scip, consdata->lincons)));
 
      for (j = 0; j < nlinvars; ++j)
      {
         assert( ! SCIPisZero(scip, linvals[j]) );
         if ( SCIPisPositive(scip, linvals[j]) )
         {
            if ( haslhs )
            {
               SCIP_CALL( SCIPaddVarLocksType(scip, linvars[j], locktype, nlockspos, nlocksneg) );
            }
            if ( hasrhs )
            {
               SCIP_CALL( SCIPaddVarLocksType(scip, linvars[j], locktype, nlocksneg, nlockspos) );
            }
         }
         else
         {
            if ( haslhs )
            {
               SCIP_CALL( SCIPaddVarLocksType(scip, linvars[j], locktype, nlocksneg, nlockspos) );
            }
            if ( hasrhs )
            {
               SCIP_CALL( SCIPaddVarLocksType(scip, linvars[j], locktype, nlockspos, nlocksneg) );
            }
         }
      }
   }
 
   return SCIP_OKAY;
}
 
 
/** constraint display method of constraint handler */
static
SCIP_DECL_CONSPRINT(consPrintIndicator)
{
   SCIP_CONSDATA* consdata;
   SCIP_VAR* binvar;
   int rhs;
 
   assert( scip != NULL );
   assert( conshdlr != NULL );
   assert( cons != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   consdata = SCIPconsGetData(cons);
   assert( consdata != NULL );
   assert( consdata->binvar != NULL );
 
   binvar = consdata->binvar;
   rhs = 1;
   if ( SCIPvarGetStatus(binvar) == SCIP_VARSTATUS_NEGATED )
   {
      rhs = 0;
      binvar = SCIPvarGetNegatedVar(binvar);
   }
   SCIPinfoMessage(scip, file, "<%s> = %d", SCIPvarGetName(binvar), rhs);
 
   assert( consdata->slackvar != NULL );
   assert( consdata->lincons != NULL );
   SCIPinfoMessage(scip, file, " -> <%s> = 0", SCIPvarGetName(consdata->slackvar));
   SCIPinfoMessage(scip, file, " (<%s>)", SCIPconsGetName(consdata->lincons));
 
   return SCIP_OKAY;
}
 
 
/** constraint copying method of constraint handler */
static
SCIP_DECL_CONSCOPY(consCopyIndicator)
{  /*lint --e{715}*/
   SCIP_CONSDATA* sourceconsdata;
   SCIP_CONS* targetlincons = NULL;
   SCIP_VAR* targetbinvar = NULL;
   SCIP_VAR* targetslackvar = NULL;
   SCIP_CONS* sourcelincons;
   SCIP_CONSHDLR* conshdlrlinear;
   const char* consname;
 
   assert( scip != NULL );
   assert( sourcescip != NULL );
   assert( sourcecons != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(SCIPconsGetHdlr(sourcecons)), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   *valid = TRUE;
 
   if ( name != NULL )
      consname = name;
   else
      consname = SCIPconsGetName(sourcecons);
 
#ifdef SCIP_MORE_DEBUG
   SCIPdebugMsg(scip, "Copying indicator constraint <%s> ...\n", consname);
#endif
 
   if ( modifiable )
   {
      SCIPwarningMessage(scip, "cannot create modifiable indicator constraint when trying to copy constraint <%s>,\n", SCIPconsGetName(sourcecons));
      *valid = FALSE;
      return SCIP_OKAY;
   }
 
   sourceconsdata = SCIPconsGetData(sourcecons);
   assert( sourceconsdata != NULL );
 
   /* get linear constraint */
   sourcelincons = sourceconsdata->lincons;
 
   /* if the constraint has been deleted -> create empty constraint (multi-aggregation might still contain slack variable, so indicator is valid) */
   if ( SCIPconsIsDeleted(sourcelincons) )
   {
      SCIPdebugMsg(scip, "Linear constraint <%s> deleted! Create empty linear constraint.\n", SCIPconsGetName(sourceconsdata->lincons));
 
      SCIP_CALL( SCIPcreateConsLinear(scip, &targetlincons, "dummy", 0, NULL, NULL, 0.0, SCIPinfinity(scip),
            FALSE, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE) );
      SCIP_CALL( SCIPaddCons(scip, targetlincons) );
   }
   else
   {
      /* get copied version of linear constraint */
      assert( sourcelincons != NULL );
      conshdlrlinear = SCIPfindConshdlr(sourcescip, "linear");
      assert( conshdlrlinear != NULL );
 
      /* if copying scip after transforming the original instance before presolving, we need to correct the linear
       * constraint pointer */
      if ( SCIPconsIsTransformed(sourcecons) && ! SCIPconsIsTransformed(sourcelincons) )
      {
         SCIP_CONS* translincons;
 
         /* adjust the linear constraint in the original constraint (no need to release translincons) */
         SCIP_CALL( SCIPgetTransformedCons(sourcescip, sourcelincons, &translincons) );
         assert( translincons != NULL );
         SCIP_CALL( SCIPreleaseCons(sourcescip, &sourceconsdata->lincons) );
         SCIP_CALL( SCIPcaptureCons(sourcescip, translincons) );
         sourceconsdata->lincons = translincons;
         sourcelincons = translincons;
      }
 
      SCIP_CALL( SCIPgetConsCopy(sourcescip, scip, sourcelincons, &targetlincons, conshdlrlinear, varmap, consmap, SCIPconsGetName(sourcelincons),
            SCIPconsIsInitial(sourcelincons), SCIPconsIsSeparated(sourcelincons), SCIPconsIsEnforced(sourcelincons), SCIPconsIsChecked(sourcelincons),
            SCIPconsIsPropagated(sourcelincons), SCIPconsIsLocal(sourcelincons), SCIPconsIsModifiable(sourcelincons), SCIPconsIsDynamic(sourcelincons),
            SCIPconsIsRemovable(sourcelincons), SCIPconsIsStickingAtNode(sourcelincons), global, valid) );
   }
 
   /* find copied variable corresponding to binvar */
   if ( *valid )
   {
      SCIP_VAR* sourcebinvar;
 
      sourcebinvar = sourceconsdata->binvar;
      assert( sourcebinvar != NULL );
 
      SCIP_CALL( SCIPgetVarCopy(sourcescip, scip, sourcebinvar, &targetbinvar, varmap, consmap, global, valid) );
   }
 
   /* find copied variable corresponding to slackvar */
   if ( *valid )
   {
      SCIP_VAR* sourceslackvar;
 
      sourceslackvar = sourceconsdata->slackvar;
      assert( sourceslackvar != NULL );
 
      SCIP_CALL( SCIPgetVarCopy(sourcescip, scip, sourceslackvar, &targetslackvar, varmap, consmap, global, valid) );
   }
 
   /* create indicator constraint */
   if ( *valid )
   {
      assert( targetlincons != NULL );
      assert( targetbinvar != NULL );
      assert( targetslackvar != NULL );
 
      /* creates indicator constraint (and captures the linear constraint) */
      /* Note that the copied constraint has activeone = TRUE, since the target binary variable already was negated if needed. */
      SCIP_CALL( SCIPcreateConsIndicatorGenericLinCons(scip, cons, consname, targetbinvar, targetlincons, targetslackvar, TRUE,
            initial, separate, enforce, check, propagate, local, dynamic, removable, stickingatnode) );
   }
   else
   {
      SCIPverbMessage(scip, SCIP_VERBLEVEL_MINIMAL, NULL, "could not copy linear constraint <%s>\n", SCIPconsGetName(sourcelincons));
   }
 
   /* release copied linear constraint */
   if ( targetlincons != NULL )
   {
      SCIP_CALL( SCIPreleaseCons(scip, &targetlincons) );
   }
 
   return SCIP_OKAY;
}
 
 
/** constraint parsing method of constraint handler */
static
SCIP_DECL_CONSPARSE(consParseIndicator)
{  /*lint --e{715}*/
   char binvarname[1024];
   char slackvarname[1024];
   char linconsname[1024];
   SCIP_VAR* binvar;
   SCIP_VAR* slackvar;
   SCIP_CONS* lincons;
   int zeroone;
   int nargs;
 
   *success = TRUE;
 
   /* read indicator constraint */
   /* coverity[secure_coding] */
   nargs = sscanf(str, " <%1023[^>]> = %d -> <%1023[^>]> = 0 (<%1023[^>]>)", binvarname, &zeroone, slackvarname, linconsname);
 
   /* downward compatible: accept missing linear constraint at end */
   if ( nargs != 3 && nargs != 4 )
   {
      SCIPverbMessage(scip, SCIP_VERBLEVEL_MINIMAL, NULL, "Syntax error: expected the following form: <var> = [0|1] -> <var> = 0 (<lincons>).\n%s\n", str);
      *success = FALSE;
      return SCIP_OKAY;
   }
 
   if ( zeroone != 0 && zeroone != 1 )
   {
      SCIPverbMessage(scip, SCIP_VERBLEVEL_MINIMAL, NULL, "Syntax error: expected the following form: <var> = [0|1] -> <var> = 0.\n%s\n", str);
      *success = FALSE;
      return SCIP_OKAY;
   }
 
   /* get binary variable */
   binvar = SCIPfindVar(scip, binvarname);
   if ( binvar == NULL )
   {
      SCIPverbMessage(scip, SCIP_VERBLEVEL_MINIMAL, NULL, "unknown variable <%s>\n", binvarname);
      *success = FALSE;
      return SCIP_OKAY;
   }
   /* check whether we need the complemented variable */
   if ( zeroone == 0 )
      SCIP_CALL( SCIPgetNegatedVar(scip, binvar, &binvar) );
 
   /* get slack variable */
   slackvar = SCIPfindVar(scip, slackvarname);
   if ( slackvar == NULL )
   {
      SCIPverbMessage(scip, SCIP_VERBLEVEL_MINIMAL, NULL, "unknown variable <%s>\n", slackvarname);
      *success = FALSE;
      return SCIP_OKAY;
   }
 
   /* determine linear constraint */
   if ( nargs == 4 )
   {
      lincons = SCIPfindCons(scip, linconsname);
      if ( lincons == NULL )
      {
         SCIPverbMessage(scip, SCIP_VERBLEVEL_MINIMAL, NULL, "unknown constraint <%s>\n", linconsname);
         *success = FALSE;
         return SCIP_OKAY;
      }
      if ( strncmp(SCIPconshdlrGetName(SCIPconsGetHdlr(lincons)), "linear", 6) != 0 )
      {
         SCIPverbMessage(scip, SCIP_VERBLEVEL_MINIMAL, NULL, "constraint <%s> is not linear\n", linconsname);
         *success = FALSE;
         return SCIP_OKAY;
      }
   }
   else
   {
      const char* posstr;
 
      /* for backward compability try to determine name of linear constraint from variables names */
      assert( nargs == 3 );
 
      /* find matching linear constraint */
      posstr = strstr(slackvarname, "indslack");
      if ( posstr == NULL )
      {
         SCIPverbMessage(scip, SCIP_VERBLEVEL_MINIMAL, NULL, "strange slack variable name: <%s>\n", slackvarname);
         *success = FALSE;
         return SCIP_OKAY;
      }
 
      /* overwrite binvarname: set up name for linear constraint */
      (void) SCIPsnprintf(binvarname, 1023, "indlin%s", posstr+8);
 
      lincons = SCIPfindCons(scip, binvarname);
      if ( lincons == NULL )
      {
         /* if not found - check without indlin */
         (void) SCIPsnprintf(binvarname, 1023, "%s", posstr+9);
         lincons = SCIPfindCons(scip, binvarname);
 
         if ( lincons == NULL )
         {
            /* if not found - check without indrhs or indlhs */
            (void) SCIPsnprintf(binvarname, 1023, "%s", posstr+16);
            lincons = SCIPfindCons(scip, binvarname);
 
            if( lincons == NULL )
            {
               SCIPverbMessage(scip, SCIP_VERBLEVEL_MINIMAL, NULL, "while parsing indicator constraint <%s>: unknown linear constraint <indlin%s>, <%s> or <%s>.\n",
                  name, posstr+8, posstr+9, posstr+16);
               *success = FALSE;
               return SCIP_OKAY;
            }
         }
      }
   }
   assert( lincons != NULL );
 
   /* check correct linear constraint */
   if ( ! SCIPisInfinity(scip, -SCIPgetLhsLinear(scip, lincons)) && ! SCIPisInfinity(scip, SCIPgetRhsLinear(scip, lincons)) )
   {
      SCIPverbMessage(scip, SCIP_VERBLEVEL_MINIMAL, NULL, "while parsing indicator constraint <%s>: linear constraint is ranged or equation.\n", name);
      *success = FALSE;
      return SCIP_OKAY;
   }
 
   /* create indicator constraint */
   SCIP_CALL( SCIPcreateConsIndicatorLinCons(scip, cons, name, binvar, lincons, slackvar,
         initial, separate, enforce, check, propagate, local, dynamic, removable, stickingatnode) );
 
   return SCIP_OKAY;
}
 
 
/** constraint enabling notification method of constraint handler */
static
SCIP_DECL_CONSENABLE(consEnableIndicator)
{
   SCIP_CONSHDLRDATA* conshdlrdata;
   SCIP_CONSDATA* consdata;
 
   assert( scip != NULL );
   assert( conshdlr != NULL );
   assert( cons != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
#ifdef SCIP_MORE_DEBUG
   SCIPdebugMsg(scip, "Enabling constraint <%s>.\n", SCIPconsGetName(cons));
#endif
 
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
 
   consdata = SCIPconsGetData(cons);
   assert( consdata != NULL );
 
   if ( conshdlrdata->altlp != NULL )
   {
      assert( conshdlrdata->sepaalternativelp );
 
      if ( consdata->colindex >= 0 )
      {
         SCIP_CALL( unfixAltLPVariable(conshdlrdata->altlp, consdata->colindex) );
      }
   }
 
   return SCIP_OKAY;
}
 
 
/** constraint disabling notification method of constraint handler */
static
SCIP_DECL_CONSDISABLE(consDisableIndicator)
{
   SCIP_CONSHDLRDATA* conshdlrdata;
 
   assert( scip != NULL );
   assert( conshdlr != NULL );
   assert( cons != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
#ifdef SCIP_MORE_DEBUG
   SCIPdebugMsg(scip, "Disabling constraint <%s>.\n", SCIPconsGetName(cons));
#endif
 
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
 
   if ( conshdlrdata->altlp != NULL )
   {
      SCIP_CONSDATA* consdata;
 
      consdata = SCIPconsGetData(cons);
      assert( consdata != NULL );
      assert( conshdlrdata->sepaalternativelp );
 
      if ( consdata->colindex >= 0 )
      {
         SCIP_CALL( fixAltLPVariable(conshdlrdata->altlp, consdata->colindex) );
      }
   }
 
   return SCIP_OKAY;
}
 
 
/** constraint method of constraint handler which returns the variables (if possible) */
static
SCIP_DECL_CONSGETVARS(consGetVarsIndicator)
{  /*lint --e{715}*/
   SCIP_CONSDATA* consdata;
   int nvars = 0;
 
   assert( scip != NULL );
   assert( cons != NULL );
   assert( vars != NULL );
   assert( success != NULL );
 
   if ( varssize < 0 )
      return SCIP_INVALIDDATA;
   assert( varssize >= 0 );
 
   (*success) = TRUE;
 
   /* if indicator constraint is already deleted */
   if ( SCIPconsIsDeleted(cons) )
      return SCIP_OKAY;
 
   consdata = SCIPconsGetData(cons);
   assert( consdata != NULL );
   assert( consdata->lincons != NULL );
 
   if ( consdata->binvar != NULL )
   {
      assert( varssize > 0 );
      vars[nvars++] = consdata->binvar;
   }
   if ( consdata->slackvar != NULL )
   {
      assert( varssize > nvars );
      vars[nvars++] = consdata->slackvar;
   }
 
   /* if linear constraint of indicator is already deleted */
   if ( SCIPconsIsDeleted(consdata->lincons) )
      return SCIP_OKAY;
 
   SCIP_CALL( SCIPgetConsVars(scip, consdata->lincons, &(vars[nvars]), varssize - nvars, success) );
 
   return SCIP_OKAY;
}
 
 
/** constraint method of constraint handler which returns the number of variables (if possible) */
static
SCIP_DECL_CONSGETNVARS(consGetNVarsIndicator)
{  /*lint --e{715}*/
   SCIP_CONSDATA* consdata;
   int nlinvars;
 
   assert( scip != NULL );
   assert( cons != NULL );
   assert( nvars != NULL );
   assert( success != NULL );
 
   *success = TRUE;
   *nvars = 0;
 
   /* if indicator constraint is already deleted */
   if ( SCIPconsIsDeleted(cons) )
      return SCIP_OKAY;
 
   consdata = SCIPconsGetData(cons);
   assert( consdata != NULL );
   assert( consdata->lincons != NULL );
 
   if ( consdata->binvar != NULL )
      ++(*nvars);
   if ( consdata->slackvar != NULL )
      ++(*nvars);
 
   /* if linear constraint of indicator is already deleted */
   if ( SCIPconsIsDeleted(consdata->lincons) )
      return SCIP_OKAY;
 
   SCIP_CALL( SCIPgetConsNVars(scip, consdata->lincons, &nlinvars, success) );
 
   if ( *success )
   {
      assert( nlinvars >= 0 );
      *nvars += nlinvars;
   }
 
   return SCIP_OKAY;
}
 
 
/** constraint handler method to suggest dive bound changes during the generic diving algorithm */
static
SCIP_DECL_CONSGETDIVEBDCHGS(consGetDiveBdChgsIndicator)
{
   SCIP_CONS** indconss;
   int nindconss;
   int c;
   SCIP_VAR* bestvar = NULL;
   SCIP_Bool bestvarroundup = FALSE;
   SCIP_Real bestscore = SCIP_REAL_MIN;
 
   assert(scip != NULL);
   assert(conshdlr != NULL);
   assert(diveset != NULL);
   assert(success != NULL);
   assert(infeasible != NULL);
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   *success = FALSE;
   *infeasible = FALSE;
 
   indconss = SCIPconshdlrGetConss(conshdlr);
   nindconss = SCIPconshdlrGetNConss(conshdlr);
 
   /* loop over indicator constraints and score indicator variables with already integral solution value */
   for (c = 0; c < nindconss; ++c)
   {
      /* check whether constraint is violated */
      if ( SCIPisViolatedIndicator(scip, indconss[c], sol) )
      {
         SCIP_VAR* binvar;
         SCIP_Real solval;
 
         binvar = SCIPgetBinaryVarIndicator(indconss[c]);
         solval = SCIPgetSolVal(scip, sol, binvar);
 
         /* we only treat indicator variables with integral solution values that are not yet fixed */
         if ( SCIPisFeasIntegral(scip, solval) && SCIPvarGetLbLocal(binvar) < SCIPvarGetUbLocal(binvar) - 0.5 )
         {
            SCIP_Real score;
            SCIP_Bool roundup;
 
            SCIP_CALL( SCIPgetDivesetScore(scip, diveset, SCIP_DIVETYPE_INTEGRALITY, binvar, solval, 0.0,
                  &score, &roundup) );
 
            /* best candidate maximizes the score */
            if ( score > bestscore )
            {
               bestscore = score;
               *success = TRUE;
               bestvar = binvar;
               bestvarroundup = roundup;
            }
         }
      }
   }
 
   assert(! *success || bestvar != NULL);
 
   if ( *success )
   {
      /* if the diving score voted for fixing the best variable to 1.0, we add this as the preferred bound change */
      SCIP_CALL( SCIPaddDiveBoundChange(scip, bestvar, SCIP_BRANCHDIR_UPWARDS, 1.0, bestvarroundup) );
      SCIP_CALL( SCIPaddDiveBoundChange(scip, bestvar, SCIP_BRANCHDIR_DOWNWARDS, 0.0, ! bestvarroundup) );
   }
 
   return SCIP_OKAY;
}
 
/** constraint handler method which returns the permutation symmetry detection graph of a constraint */
static
SCIP_DECL_CONSGETPERMSYMGRAPH(consGetPermsymGraphIndicator)
{  /*lint --e{715}*/
   SCIP_CALL( addSymmetryInformation(scip, SYM_SYMTYPE_PERM, cons, graph, success) );
 
   return SCIP_OKAY;
}
 
/** constraint handler method which returns the signed permutation symmetry detection graph of a constraint */
static
SCIP_DECL_CONSGETSIGNEDPERMSYMGRAPH(consGetSignedPermsymGraphIndicator)
{  /*lint --e{715}*/
   SCIP_CALL( addSymmetryInformation(scip, SYM_SYMTYPE_SIGNPERM, cons, graph, success) );
 
   return SCIP_OKAY;
}
 
/* ---------------- Constraint specific interface methods ---------------- */
 
/** creates the handler for indicator constraints and includes it in SCIP */
SCIP_RETCODE SCIPincludeConshdlrIndicator(
   SCIP*                 scip                /**< SCIP data structure */
   )
{
   SCIP_CONFLICTHDLRDATA* conflicthdlrdata;
   SCIP_CONFLICTHDLR* conflicthdlr;
   SCIP_CONSHDLRDATA* conshdlrdata;
   SCIP_CONSHDLR* conshdlr;
 
   /* create constraint handler data (used in conflicthdlrdata) */
   SCIP_CALL( SCIPallocBlockMemory(scip, &conshdlrdata) );
 
   /* create event handler for bound change events */
   conshdlrdata->eventhdlrbound = NULL;
   SCIP_CALL( SCIPincludeEventhdlrBasic(scip, &(conshdlrdata->eventhdlrbound),  EVENTHDLR_BOUND_NAME, EVENTHDLR_BOUND_DESC,
         eventExecIndicatorBound, NULL) );
   assert(conshdlrdata->eventhdlrbound != NULL);
 
   /* create event handler for bound change events on linear constraint */
   conshdlrdata->eventhdlrlinconsbound = NULL;
   SCIP_CALL( SCIPincludeEventhdlrBasic(scip, &(conshdlrdata->eventhdlrlinconsbound),  EVENTHDLR_LINCONSBOUND_NAME, EVENTHDLR_LINCONSBOUND_DESC,
         eventExecIndicatorLinconsBound, NULL) );
   assert(conshdlrdata->eventhdlrlinconsbound != NULL);
 
   /* create event handler for restart events */
   conshdlrdata->eventhdlrrestart = NULL;
   SCIP_CALL( SCIPincludeEventhdlrBasic(scip, &(conshdlrdata->eventhdlrrestart), EVENTHDLR_RESTART_NAME, EVENTHDLR_RESTART_DESC,
         eventExecIndicatorRestart, NULL) );
   assert( conshdlrdata->eventhdlrrestart != NULL );
 
   conshdlrdata->heurtrysol = NULL;
   conshdlrdata->sepaalternativelp = DEFAULT_SEPAALTERNATIVELP;
   conshdlrdata->nolinconscont = DEFAULT_NOLINCONSCONT;
   conshdlrdata->forcerestart = DEFAULT_FORCERESTART;
   conshdlrdata->binvarhash = NULL;
   conshdlrdata->binslackvarhash = NULL;
 
   /* initialize constraint handler data */
   initConshdlrData(scip, conshdlrdata);
 
   /* the following three variables cannot be initialized in the above method, because initConshdlrData() is also called
    * in the CONSINIT callback, but these variables might be used even before the is ccallback is called, so we would
    * lose the data added before calling this callback */
   conshdlrdata->addlincons = NULL;
   conshdlrdata->naddlincons = 0;
   conshdlrdata->maxaddlincons = 0;
 
   /* include constraint handler */
   SCIP_CALL( SCIPincludeConshdlrBasic(scip, &conshdlr, CONSHDLR_NAME, CONSHDLR_DESC,
         CONSHDLR_ENFOPRIORITY, CONSHDLR_CHECKPRIORITY, CONSHDLR_EAGERFREQ, CONSHDLR_NEEDSCONS,
         consEnfolpIndicator, consEnfopsIndicator, consCheckIndicator, consLockIndicator,
         conshdlrdata) );
 
   assert( conshdlr != NULL );
 
   /* set non-fundamental callbacks via specific setter functions */
   SCIP_CALL( SCIPsetConshdlrCopy(scip, conshdlr, conshdlrCopyIndicator, consCopyIndicator) );
   SCIP_CALL( SCIPsetConshdlrDelete(scip, conshdlr, consDeleteIndicator) );
   SCIP_CALL( SCIPsetConshdlrDisable(scip, conshdlr, consDisableIndicator) );
   SCIP_CALL( SCIPsetConshdlrEnable(scip, conshdlr, consEnableIndicator) );
   SCIP_CALL( SCIPsetConshdlrGetDiveBdChgs(scip, conshdlr, consGetDiveBdChgsIndicator) );
   SCIP_CALL( SCIPsetConshdlrExit(scip, conshdlr, consExitIndicator) );
   SCIP_CALL( SCIPsetConshdlrExitsol(scip, conshdlr, consExitsolIndicator) );
   SCIP_CALL( SCIPsetConshdlrFree(scip, conshdlr, consFreeIndicator) );
   SCIP_CALL( SCIPsetConshdlrGetVars(scip, conshdlr, consGetVarsIndicator) );
   SCIP_CALL( SCIPsetConshdlrGetNVars(scip, conshdlr, consGetNVarsIndicator) );
   SCIP_CALL( SCIPsetConshdlrInit(scip, conshdlr, consInitIndicator) );
   SCIP_CALL( SCIPsetConshdlrInitpre(scip, conshdlr, consInitpreIndicator) );
   SCIP_CALL( SCIPsetConshdlrInitsol(scip, conshdlr, consInitsolIndicator) );
   SCIP_CALL( SCIPsetConshdlrInitlp(scip, conshdlr, consInitlpIndicator) );
   SCIP_CALL( SCIPsetConshdlrParse(scip, conshdlr, consParseIndicator) );
   SCIP_CALL( SCIPsetConshdlrPresol(scip, conshdlr, consPresolIndicator, CONSHDLR_MAXPREROUNDS, CONSHDLR_PRESOLTIMING) );
   SCIP_CALL( SCIPsetConshdlrPrint(scip, conshdlr, consPrintIndicator) );
   SCIP_CALL( SCIPsetConshdlrProp(scip, conshdlr, consPropIndicator, CONSHDLR_PROPFREQ, CONSHDLR_DELAYPROP,
         CONSHDLR_PROP_TIMING) );
   SCIP_CALL( SCIPsetConshdlrResprop(scip, conshdlr, consRespropIndicator) );
   SCIP_CALL( SCIPsetConshdlrSepa(scip, conshdlr, consSepalpIndicator, consSepasolIndicator, CONSHDLR_SEPAFREQ,
         CONSHDLR_SEPAPRIORITY, CONSHDLR_DELAYSEPA) );
   SCIP_CALL( SCIPsetConshdlrTrans(scip, conshdlr, consTransIndicator) );
   SCIP_CALL( SCIPsetConshdlrEnforelax(scip, conshdlr, consEnforelaxIndicator) );
   SCIP_CALL( SCIPsetConshdlrGetPermsymGraph(scip, conshdlr, consGetPermsymGraphIndicator) );
   SCIP_CALL( SCIPsetConshdlrGetSignedPermsymGraph(scip, conshdlr, consGetSignedPermsymGraphIndicator) );
 
   /* add upgrading method */
   if ( SCIPfindConshdlr(scip, "linear") != NULL )
   {
      /* include the linear constraint upgrade in the linear constraint handler */
      SCIP_CALL( SCIPincludeLinconsUpgrade(scip, linconsUpgdIndicator, LINCONSUPGD_PRIORITY, CONSHDLR_NAME) );
   }
 
   /* create conflict handler data */
   SCIP_CALL( SCIPallocBlockMemory(scip, &conflicthdlrdata) );
   conflicthdlrdata->conshdlrdata = conshdlrdata;
   conflicthdlrdata->conshdlr = conshdlr;
   assert( conflicthdlrdata->conshdlr != NULL );
 
   /* create conflict handler for indicator constraints */
   SCIP_CALL( SCIPincludeConflicthdlrBasic(scip, &conflicthdlr, CONFLICTHDLR_NAME, CONFLICTHDLR_DESC, CONFLICTHDLR_PRIORITY,
         conflictExecIndicator, conflicthdlrdata) );
 
   SCIP_CALL( SCIPsetConflicthdlrFree(scip, conflicthdlr, conflictFreeIndicator) );
 
   /* add indicator constraint handler parameters */
   SCIP_CALL( SCIPaddBoolParam(scip,
         "constraints/indicator/branchindicators",
         "Branch on indicator constraints in enforcing?",
         &conshdlrdata->branchindicators, TRUE, DEFAULT_BRANCHINDICATORS, NULL, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip,
         "constraints/indicator/genlogicor",
         "Generate logicor constraints instead of cuts?",
         &conshdlrdata->genlogicor, TRUE, DEFAULT_GENLOGICOR, NULL, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip,
         "constraints/indicator/addcoupling",
         "Add coupling constraints or rows if big-M is small enough?",
         &conshdlrdata->addcoupling, TRUE, DEFAULT_ADDCOUPLING, NULL, NULL) );
 
   SCIP_CALL( SCIPaddRealParam(scip,
         "constraints/indicator/maxcouplingvalue",
         "maximum coefficient for binary variable in coupling constraint",
         &conshdlrdata->maxcouplingvalue, TRUE, DEFAULT_MAXCOUPLINGVALUE, 0.0, 1e9, NULL, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip,
         "constraints/indicator/addcouplingcons",
         "Add initial variable upper bound constraints, if 'addcoupling' is true?",
         &conshdlrdata->addcouplingcons, TRUE, DEFAULT_ADDCOUPLINGCONS, NULL, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip,
         "constraints/indicator/sepacouplingcuts",
         "Should the coupling inequalities be separated dynamically?",
         &conshdlrdata->sepacouplingcuts, TRUE, DEFAULT_SEPACOUPLINGCUTS, NULL, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip,
         "constraints/indicator/sepacouplinglocal",
         "Allow to use local bounds in order to separate coupling inequalities?",
         &conshdlrdata->sepacouplinglocal, TRUE, DEFAULT_SEPACOUPLINGLOCAL, NULL, NULL) );
 
   SCIP_CALL( SCIPaddRealParam(scip,
         "constraints/indicator/sepacouplingvalue",
         "maximum coefficient for binary variable in separated coupling constraint",
         &conshdlrdata->sepacouplingvalue, TRUE, DEFAULT_SEPACOUPLINGVALUE, 0.0, 1e9, NULL, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip,
         "constraints/indicator/sepaperspective",
         "Separate cuts based on perspective formulation?",
         &conshdlrdata->sepaperspective, TRUE, DEFAULT_SEPAPERSPECTIVE, NULL, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip,
         "constraints/indicator/sepapersplocal",
         "Allow to use local bounds in order to separate perspective cuts?",
         &conshdlrdata->sepapersplocal, TRUE, DEFAULT_SEPAPERSPLOCAL, NULL, NULL) );
 
   SCIP_CALL( SCIPaddIntParam(scip,
         "constraints/indicator/maxsepanonviolated",
         "maximal number of separated non violated IISs, before separation is stopped",
         &conshdlrdata->maxsepanonviolated, FALSE, DEFAULT_MAXSEPANONVIOLATED, 0, INT_MAX, NULL, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip,
         "constraints/indicator/updatebounds",
         "Update bounds of original variables for separation?",
         &conshdlrdata->updatebounds, TRUE, DEFAULT_UPDATEBOUNDS, NULL, NULL) );
 
   SCIP_CALL( SCIPaddRealParam(scip,
         "constraints/indicator/maxconditionaltlp",
         "maximum estimated condition of the solution basis matrix of the alternative LP to be trustworthy (0.0 to disable check)",
         &conshdlrdata->maxconditionaltlp, TRUE, DEFAULT_MAXCONDITIONALTLP, 0.0, SCIP_REAL_MAX, NULL, NULL) );
 
   SCIP_CALL( SCIPaddIntParam(scip,
         "constraints/indicator/maxsepacuts",
         "maximal number of cuts separated per separation round",
         &conshdlrdata->maxsepacuts, FALSE, DEFAULT_MAXSEPACUTS, 0, INT_MAX, NULL, NULL) );
 
   SCIP_CALL( SCIPaddIntParam(scip,
         "constraints/indicator/maxsepacutsroot",
         "maximal number of cuts separated per separation round in the root node",
         &conshdlrdata->maxsepacutsroot, FALSE, DEFAULT_MAXSEPACUTSROOT, 0, INT_MAX, NULL, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip,
         "constraints/indicator/removeindicators",
         "Remove indicator constraint if corresponding variable bound constraint has been added?",
         &conshdlrdata->removeindicators, TRUE, DEFAULT_REMOVEINDICATORS, NULL, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip,
         "constraints/indicator/generatebilinear",
         "Do not generate indicator constraint, but a bilinear constraint instead?",
         &conshdlrdata->generatebilinear, TRUE, DEFAULT_GENERATEBILINEAR, NULL, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip,
         "constraints/indicator/scaleslackvar",
         "Scale slack variable coefficient at construction time?",
         &conshdlrdata->scaleslackvar, TRUE, DEFAULT_SCALESLACKVAR, NULL, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip,
         "constraints/indicator/trysolutions",
         "Try to make solutions feasible by setting indicator variables?",
         &conshdlrdata->trysolutions, TRUE, DEFAULT_TRYSOLUTIONS, NULL, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip,
         "constraints/indicator/enforcecuts",
         "In enforcing try to generate cuts (only if sepaalternativelp is true)?",
         &conshdlrdata->enforcecuts, TRUE, DEFAULT_ENFORCECUTS, NULL, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip,
         "constraints/indicator/dualreductions",
         "Should dual reduction steps be performed?",
         &conshdlrdata->dualreductions, TRUE, DEFAULT_DUALREDUCTIONS, NULL, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip,
         "constraints/indicator/addopposite",
         "Add opposite inequality in nodes in which the binary variable has been fixed to 0?",
         &conshdlrdata->addopposite, TRUE, DEFAULT_ADDOPPOSITE, NULL, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip,
         "constraints/indicator/conflictsupgrade",
         "Try to upgrade bounddisjunction conflicts by replacing slack variables?",
         &conshdlrdata->conflictsupgrade, TRUE, DEFAULT_CONFLICTSUPGRADE, NULL, NULL) );
 
   SCIP_CALL( SCIPaddRealParam(scip,
         "constraints/indicator/restartfrac",
         "fraction of binary variables that need to be fixed before restart occurs (in forcerestart)",
         &conshdlrdata->restartfrac, TRUE, DEFAULT_RESTARTFRAC, 0.0, 1.0, NULL, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip,
         "constraints/indicator/useotherconss",
         "Collect other constraints to alternative LP?",
         &conshdlrdata->useotherconss, TRUE, DEFAULT_USEOTHERCONSS, NULL, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip,
         "constraints/indicator/useobjectivecut",
         "Use objective cut with current best solution to alternative LP?",
         &conshdlrdata->useobjectivecut, TRUE, DEFAULT_USEOBJECTIVECUT, NULL, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip,
         "constraints/indicator/trysolfromcover",
         "Try to construct a feasible solution from a cover?",
         &conshdlrdata->trysolfromcover, TRUE, DEFAULT_TRYSOLFROMCOVER, NULL, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip,
         "constraints/indicator/upgradelinear",
         "Try to upgrade linear constraints to indicator constraints?",
         &conshdlrdata->upgradelinear, TRUE, DEFAULT_UPGRADELINEAR, NULL, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip,
         "constraints/indicator/usesameslackvar",
         "Use same slack variable for indicator constraints with common binary variable?",
         &conshdlrdata->usesameslackvar, TRUE, DEFAULT_USESAMESLACKVAR, NULL, NULL) );
 
   /* parameters that should not be changed after problem stage: */
   SCIP_CALL( SCIPaddBoolParam(scip,
         "constraints/indicator/sepaalternativelp",
         "Separate using the alternative LP?",
         &conshdlrdata->sepaalternativelp_, TRUE, DEFAULT_SEPAALTERNATIVELP, paramChangedIndicator, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip,
         "constraints/indicator/forcerestart",
         "Force restart if absolute gap is 1 or enough binary variables have been fixed?",
         &conshdlrdata->forcerestart_, TRUE, DEFAULT_FORCERESTART, paramChangedIndicator, NULL) );
 
   SCIP_CALL( SCIPaddBoolParam(scip,
         "constraints/indicator/nolinconscont",
         "Decompose problem (do not generate linear constraint if all variables are continuous)?",
         &conshdlrdata->nolinconscont_, TRUE, DEFAULT_NOLINCONSCONT, paramChangedIndicator, NULL) );
 
   return SCIP_OKAY;
}
 
/** creates and captures an indicator constraint
 *
 *  @note @a binvar is checked to be binary only later. This enables a change of the type in
 *  procedures reading an instance.
 *
 *  @note the constraint gets captured, hence at one point you have to release it using the method SCIPreleaseCons()
 */
SCIP_RETCODE SCIPcreateConsIndicator(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_CONS**           cons,               /**< pointer to hold the created constraint (indicator or quadratic) */
   const char*           name,               /**< name of constraint */
   SCIP_VAR*             binvar,             /**< binary indicator variable (or NULL) */
   int                   nvars,              /**< number of variables in the inequality */
   SCIP_VAR**            vars,               /**< array with variables of inequality (or NULL) */
   SCIP_Real*            vals,               /**< values of variables in inequality (or NULL) */
   SCIP_Real             rhs,                /**< rhs of the inequality */
   SCIP_Bool             initial,            /**< should the LP relaxation of constraint be in the initial LP? Usually set to TRUE. */
   SCIP_Bool             separate,           /**< should the constraint be separated during LP processing?
                                              *   Usually set to TRUE. */
   SCIP_Bool             enforce,            /**< should the constraint be enforced during node processing?
                                              *   TRUE for model constraints, FALSE for additional, redundant constraints. */
   SCIP_Bool             check,              /**< should the constraint be checked for feasibility?
                                              *   TRUE for model constraints, FALSE for additional, redundant constraints. */
   SCIP_Bool             propagate,          /**< should the constraint be propagated during node processing?
                                              *   Usually set to TRUE. */
   SCIP_Bool             local,              /**< is constraint only valid locally?
                                              *   Usually set to FALSE. Has to be set to TRUE, e.g., for branching constraints. */
   SCIP_Bool             dynamic,            /**< is constraint subject to aging?
                                              *   Usually set to FALSE. Set to TRUE for own cuts which
                                              *   are separated as constraints. */
   SCIP_Bool             removable,          /**< should the relaxation be removed from the LP due to aging or cleanup?
                                              *   Usually set to FALSE. Set to TRUE for 'lazy constraints' and 'user cuts'. */
   SCIP_Bool             stickingatnode      /**< should the constraint always be kept at the node where it was added, even
                                              *   if it may be moved to a more global node?
                                              *   Usually set to FALSE. Set to TRUE to for constraints that represent node data. */
   )
{
   return SCIPcreateConsIndicatorGeneric(scip, cons, name, binvar, nvars, vars, vals, rhs, TRUE, TRUE, initial,
      separate, enforce, check, propagate, local, dynamic, removable, stickingatnode);
}
 
/** creates and captures a indicator constraint in a more generic version.
 *
 *  The key difference from SCIPcreateConsIndicator() is the activeone and lessthanineq Booleans.
 *  If \f$z = o\f$, with \f$o\f$ the activeone flag, then:
 *  if lessthanineq then \f$a^T x \leq b\f$ holds, else the passed vectors are assumed to be of the form \f$a^T x \geq b\f$.
 *  The underlying linear constraint is always created as a less-than inequality.
 */
SCIP_RETCODE SCIPcreateConsIndicatorGeneric(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_CONS**           cons,               /**< pointer to hold the created constraint (indicator or quadratic) */
   const char*           name,               /**< name of constraint */
   SCIP_VAR*             binvar,             /**< binary indicator variable (or NULL) */
   int                   nvars,              /**< number of variables in the inequality */
   SCIP_VAR**            vars,               /**< array with variables of inequality (or NULL) */
   SCIP_Real*            vals,               /**< values of variables in inequality (or NULL) */
   SCIP_Real             rhs,                /**< rhs of the inequality */
   SCIP_Bool             activeone,          /**< is the constraint active when the binary is 1? */
   SCIP_Bool             lessthanineq,       /**< is the linear constraint a less than RHS (TRUE) or greater than RHS (FALSE)? */
   SCIP_Bool             initial,            /**< should the LP relaxation of constraint be in the initial LP? Usually set to TRUE. */
   SCIP_Bool             separate,           /**< should the constraint be separated during LP processing?
                                              *   Usually set to TRUE. */
   SCIP_Bool             enforce,            /**< should the constraint be enforced during node processing?
                                              *   TRUE for model constraints, FALSE for additional, redundant constraints. */
   SCIP_Bool             check,              /**< should the constraint be checked for feasibility?
                                              *   TRUE for model constraints, FALSE for additional, redundant constraints. */
   SCIP_Bool             propagate,          /**< should the constraint be propagated during node processing?
                                              *   Usually set to TRUE. */
   SCIP_Bool             local,              /**< is constraint only valid locally?
                                              *   Usually set to FALSE. Has to be set to TRUE, e.g., for branching constraints. */
   SCIP_Bool             dynamic,            /**< is constraint subject to aging?
                                              *   Usually set to FALSE. Set to TRUE for own cuts which
                                              *   are separated as constraints. */
   SCIP_Bool             removable,          /**< should the relaxation be removed from the LP due to aging or cleanup?
                                              *   Usually set to FALSE. Set to TRUE for 'lazy constraints' and 'user cuts'. */
   SCIP_Bool             stickingatnode      /**< should the constraint always be kept at the node where it was added, even
                                              *   if it may be moved to a more global node?
                                              *   Usually set to FALSE. Set to TRUE to for constraints that represent node data. */
   )
{
   SCIP_CONSHDLR* conshdlr;
   SCIP_CONSHDLRDATA* conshdlrdata;
   SCIP_CONSDATA* consdata = NULL;
   SCIP_CONS* lincons;
   SCIP_VAR* slackvar = NULL;
   SCIP_VAR* binvarinternal;
   SCIP_Bool modifiable = FALSE;
   SCIP_Bool linconsactive;
   SCIP_Bool integral = TRUE;
   SCIP_Real* valscopy;
   SCIP_Real absvalsum = 0.0;
   char s[SCIP_MAXSTRLEN];
   int v;
 
   if ( nvars < 0 )
   {
      SCIPerrorMessage("Indicator constraint <%s> needs nonnegative number of variables in linear constraint.\n", name);
      return SCIP_INVALIDDATA;
   }
 
   /* find the indicator constraint handler */
   conshdlr = SCIPfindConshdlr(scip, CONSHDLR_NAME);
   if ( conshdlr == NULL )
   {
      SCIPerrorMessage("<%s> constraint handler not found\n", CONSHDLR_NAME);
      return SCIP_PLUGINNOTFOUND;
   }
 
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
 
   if ( conshdlrdata->nolinconscont && ! conshdlrdata->sepaalternativelp )
   {
      SCIPerrorMessage("constraint handler <%s>: need parameter <sepaalternativelp> to be true if parameter <nolinconscont> is true.\n", CONSHDLR_NAME);
      return SCIP_INVALIDDATA;
   }
 
   if ( conshdlrdata->nolinconscont && conshdlrdata->generatebilinear )
   {
      SCIPerrorMessage("constraint handler <%s>: parameters <nolinconscont> and <generatebilinear> cannot both be true.\n", CONSHDLR_NAME);
      return SCIP_INVALIDDATA;
   }
 
   valscopy = NULL;
   if ( lessthanineq )
      valscopy = vals;
   else
   {
      /* flip coefficients and RHS of indicator */
      SCIP_CALL( SCIPallocBufferArray(scip, &valscopy, nvars) );
      for ( v = 0; v < nvars; ++v )
         valscopy[v] = -vals[v];
      rhs = -rhs;
   }
   assert( nvars == 0 || valscopy != NULL );
 
   /* determine integrality of slack variable and whether problem is decomposed if no variables are integral */
   linconsactive = !conshdlrdata->nolinconscont;
   for ( v = 0; v < nvars; ++v )
   {
      if ( conshdlrdata->scaleslackvar )
         absvalsum += REALABS(valscopy[v]);
      if ( SCIPvarIsIntegral(vars[v]) )
      {
         linconsactive = TRUE;
         if ( !conshdlrdata->scaleslackvar && !integral )
            break;
         if ( !SCIPisIntegral(scip, valscopy[v]) )
         {
            integral = FALSE;
            if ( !conshdlrdata->scaleslackvar )
               break;
         }
      }
      else
      {
         integral = FALSE;
         if ( !conshdlrdata->scaleslackvar && linconsactive )
            break;
      }
   }
 
   /* if active on 0, a provided binary variable is negated */
   if ( activeone || binvar == NULL )
      binvarinternal = binvar;
   else
   {
      assert( SCIPvarIsBinary(binvar) );
      SCIP_CALL( SCIPgetNegatedVar(scip, binvar, &binvarinternal) );
   }
 
   /* Check whether the same slack variable should be use for constraints with a common binary variable. This can
    * reduce the size of the problem, because only one coupling constraint is needed. However, it is less tight. */
   if ( binvarinternal != NULL )
   {
      /* make sure that the hashmap exists if we want to use the same slack variable */
      if ( conshdlrdata->usesameslackvar && conshdlrdata->binslackvarhash == NULL )
      {
         SCIP_CALL( SCIPhashmapCreate(&conshdlrdata->binslackvarhash, SCIPblkmem(scip), SCIPgetNOrigVars(scip)) );
      }
 
      if ( conshdlrdata->binslackvarhash != NULL && SCIPhashmapExists(conshdlrdata->binslackvarhash, (void*) binvarinternal) )
      {
         slackvar = (SCIP_VAR*) SCIPhashmapGetImage(conshdlrdata->binslackvarhash, (void*) binvarinternal);
 
         /* make sure that the type of the slack is as general as necessary */
         if ( !integral && SCIPvarIsIntegral(slackvar) )
         {
            SCIP_Bool infeasible;
 
            SCIP_CALL( SCIPchgVarType(scip, slackvar, SCIP_VARTYPE_CONTINUOUS, &infeasible) );
            assert( !infeasible );
            SCIP_CALL( SCIPchgVarImplType(scip, slackvar, SCIP_IMPLINTTYPE_NONE, &infeasible) );
            assert( !infeasible );
         }
 
         SCIP_CALL( SCIPcaptureVar(scip, slackvar) );
      }
      else
      {
         /* create slack variable */
         (void) SCIPsnprintf(s, SCIP_MAXSTRLEN, "indslack_%s", name);
         SCIP_CALL( SCIPcreateVarImpl(scip, &slackvar, s, 0.0, SCIPinfinity(scip), 0.0,
               SCIP_VARTYPE_CONTINUOUS, integral ? SCIP_IMPLINTTYPE_WEAK : SCIP_IMPLINTTYPE_NONE,
               TRUE, FALSE, NULL, NULL, NULL, NULL, NULL) );
 
         SCIP_CALL( SCIPaddVar(scip, slackvar) );
 
         /* mark slack variable not to be multi-aggregated */
         SCIP_CALL( SCIPmarkDoNotMultaggrVar(scip, slackvar) );
 
         if ( conshdlrdata->binslackvarhash != NULL )
         {
            SCIP_CALL( SCIPhashmapInsert(conshdlrdata->binslackvarhash, (void*) binvarinternal, (void*) slackvar) );
         }
      }
   }
   else
   {
      /* create slack variable */
      (void) SCIPsnprintf(s, SCIP_MAXSTRLEN, "indslack_%s", name);
      SCIP_CALL( SCIPcreateVarImpl(scip, &slackvar, s, 0.0, SCIPinfinity(scip), 0.0,
            SCIP_VARTYPE_CONTINUOUS, integral ? SCIP_IMPLINTTYPE_WEAK : SCIP_IMPLINTTYPE_NONE,
            TRUE, FALSE, NULL, NULL, NULL, NULL, NULL) );
 
      SCIP_CALL( SCIPaddVar(scip, slackvar) );
 
      /* mark slack variable not to be multi-aggregated */
      SCIP_CALL( SCIPmarkDoNotMultaggrVar(scip, slackvar) );
   }
   assert( slackvar != NULL );
 
   /* create linear constraint */
   (void) SCIPsnprintf(s, SCIP_MAXSTRLEN, "indlin_%s", name);
 
   /* if the linear constraint should be activated (lincons is captured) */
   if ( linconsactive )
   {
      /* the constraint is initial if initial is true, enforced, separated, and checked */
      SCIP_CALL( SCIPcreateConsLinear(scip, &lincons, s, nvars, vars, valscopy, -SCIPinfinity(scip), rhs,
            initial, TRUE, TRUE, TRUE, TRUE, FALSE, FALSE, FALSE, FALSE, FALSE) );
   }
   else
   {
      /* create non-active linear constraint, which is neither initial, nor enforced, nor separated, nor checked */
      SCIP_CALL( SCIPcreateConsLinear(scip, &lincons, s, nvars, vars, valscopy, -SCIPinfinity(scip), rhs,
            FALSE, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE) );
   }
 
   if ( ! lessthanineq )
      SCIPfreeBufferArray(scip, &valscopy);
 
   /* mark linear constraint not to be upgraded - otherwise we loose control over it */
   SCIPconsAddUpgradeLocks(lincons, 1);
   assert( SCIPconsGetNUpgradeLocks(lincons) > 0 );
 
   /* add slack variable */
   if ( conshdlrdata->scaleslackvar && nvars > 0 )
   {
      absvalsum = absvalsum/((SCIP_Real) nvars);
      if ( integral )
         absvalsum = SCIPceil(scip, absvalsum);
      if ( SCIPisZero(scip, absvalsum) )
         absvalsum = 1.0;
      SCIP_CALL( SCIPaddCoefLinear(scip, lincons, slackvar, -absvalsum) );
   }
   else
   {
      SCIP_CALL( SCIPaddCoefLinear(scip, lincons, slackvar, -1.0) );
   }
   SCIP_CALL( SCIPaddCons(scip, lincons) );
 
   /* check whether we should generate a bilinear constraint instead of an indicator constraint */
   if ( conshdlrdata->generatebilinear )
   {
      assert( linconsactive );
 
      SCIP_Real val = 1.0;
 
      /* create a quadratic constraint with a single bilinear term - note that cons is used */
      SCIP_CALL( SCIPcreateConsQuadraticNonlinear(scip, cons, name, 0, NULL, NULL, 1, &binvarinternal, &slackvar, &val, 0.0, 0.0,
            TRUE, TRUE, TRUE, TRUE, TRUE, FALSE, FALSE, FALSE, FALSE) );
   }
   else
   {
      /* create constraint data */
      SCIP_CALL( consdataCreate(scip, conshdlr, conshdlrdata, name, &consdata, conshdlrdata->eventhdlrrestart,
            binvar, activeone, lessthanineq, slackvar, lincons, linconsactive) );
      assert( consdata != NULL );
 
      /* do not need to capture slack variable and linear constraint here */
      if( consdata->binvar != NULL )
      {
         SCIP_CALL( SCIPcaptureVar(scip, consdata->binvar) );
      }
 
      /* create constraint */
      SCIP_CALL( SCIPcreateCons(scip, cons, name, conshdlr, consdata, initial, separate, enforce, check, propagate,
            local, modifiable, dynamic, removable, stickingatnode) );
 
      if ( SCIPisTransformed(scip) )
      {
         /* catch local bound change events on binary variable */
         if ( linconsactive )
         {
            SCIP_CALL( SCIPcatchVarEvent(scip, consdata->binvar, SCIP_EVENTTYPE_BOUNDCHANGED, conshdlrdata->eventhdlrbound, (SCIP_EVENTDATA*) *cons, NULL) );
            SCIP_CALL( SCIPcatchVarEvent(scip, consdata->slackvar, SCIP_EVENTTYPE_BOUNDCHANGED, conshdlrdata->eventhdlrbound, (SCIP_EVENTDATA*) *cons, NULL) );
         }
 
         /* make sure that binary variable hash exists */
         if ( conshdlrdata->sepaalternativelp )
         {
            if ( conshdlrdata->binvarhash == NULL )
            {
               SCIP_CALL( SCIPhashmapCreate(&conshdlrdata->binvarhash, SCIPblkmem(scip), SCIPgetNOrigVars(scip)) );
            }
 
            /* check whether binary variable is present: note that a binary variable might appear several times, but this seldomly happens. */
            assert( conshdlrdata->binvarhash != NULL );
            if ( ! SCIPhashmapExists(conshdlrdata->binvarhash, (void*) binvarinternal) )
            {
               SCIP_CALL( SCIPhashmapInsert(conshdlrdata->binvarhash, (void*) binvarinternal, (void*) (*cons)) );
            }
         }
      }
   }
 
   return SCIP_OKAY;
}
 
/** creates and captures an indicator constraint in its most basic version, i. e., all constraint flags are set to their
 *  basic value as explained for the method SCIPcreateConsIndicator(); all flags can be set via
 *  SCIPsetConsFLAGNAME-methods in scip.h
 *
 *  @see SCIPcreateConsIndicator() for information about the basic constraint flag configuration
 *
 *  @note the constraint gets captured, hence at one point you have to release it using the method SCIPreleaseCons()
 */
SCIP_RETCODE SCIPcreateConsBasicIndicator(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_CONS**           cons,               /**< pointer to hold the created constraint (indicator or quadratic) */
   const char*           name,               /**< name of constraint */
   SCIP_VAR*             binvar,             /**< binary indicator variable (or NULL) */
   int                   nvars,              /**< number of variables in the inequality */
   SCIP_VAR**            vars,               /**< array with variables of inequality (or NULL) */
   SCIP_Real*            vals,               /**< values of variables in inequality (or NULL) */
   SCIP_Real             rhs                 /**< rhs of the inequality */
   )
{
   assert( scip != NULL );
 
   SCIP_CALL( SCIPcreateConsIndicator(scip, cons, name, binvar, nvars, vars, vals, rhs,
         TRUE, TRUE, TRUE, TRUE, TRUE, FALSE, FALSE, FALSE, FALSE) );
 
   return SCIP_OKAY;
}
 
/** creates and captures an indicator constraint with given linear constraint and slack variable
 *  in a generic version, i.e., with a flag activeone indicating whether the constraint is active on
 *  value 1 or 0 of the binary variable.
 
 *  @note @a binvar is checked to be binary only later. This enables a change of the type in
 *  procedures reading an instance.
 *
 *  @note we assume that @a slackvar actually appears in @a lincons and we also assume that it takes
 *  the role of a slack variable!
 *
 *  @note the constraint gets captured, hence at one point you have to release it using the method SCIPreleaseCons()
 *
 *  @see SCIPcreateConsIndicatorLinCons() for information about the basic constraint flag configuration
 */
SCIP_RETCODE SCIPcreateConsIndicatorGenericLinCons(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_CONS**           cons,               /**< pointer to hold the created constraint */
   const char*           name,               /**< name of constraint */
   SCIP_VAR*             binvar,             /**< binary indicator variable */
   SCIP_CONS*            lincons,            /**< linear constraint */
   SCIP_VAR*             slackvar,           /**< slack variable */
   SCIP_Bool             activeone,          /**< is the constraint active when the binary is 1? */
   SCIP_Bool             initial,            /**< should the LP relaxation of constraint be in the initial LP? Usually set to TRUE. */
   SCIP_Bool             separate,           /**< should the constraint be separated during LP processing?
                                              *   Usually set to TRUE. */
   SCIP_Bool             enforce,            /**< should the constraint be enforced during node processing?
                                              *   TRUE for model constraints, FALSE for additional, redundant constraints. */
   SCIP_Bool             check,              /**< should the constraint be checked for feasibility?
                                              *   TRUE for model constraints, FALSE for additional, redundant constraints. */
   SCIP_Bool             propagate,          /**< should the constraint be propagated during node processing?
                                              *   Usually set to TRUE. */
   SCIP_Bool             local,              /**< is constraint only valid locally?
                                              *   Usually set to FALSE. Has to be set to TRUE, e.g., for branching constraints. */
   SCIP_Bool             dynamic,            /**< is constraint subject to aging?
                                              *   Usually set to FALSE. Set to TRUE for own cuts which
                                              *   are separated as constraints. */
   SCIP_Bool             removable,          /**< should the relaxation be removed from the LP due to aging or cleanup?
                                              *   Usually set to FALSE. Set to TRUE for 'lazy constraints' and 'user cuts'. */
   SCIP_Bool             stickingatnode      /**< should the constraint always be kept at the node where it was added, even
                                              *   if it may be moved to a more global node?
                                              *   Usually set to FALSE. Set to TRUE to for constraints that represent node data. */
   )
{
   SCIP_CONSHDLR* conshdlr;
   SCIP_CONSHDLRDATA* conshdlrdata;
   SCIP_CONSDATA* consdata = NULL;
   SCIP_VAR** vars;
   SCIP_Bool modifiable = FALSE;
   SCIP_Bool linconsactive;
   int nvars;
   int v;
 
   assert( scip != NULL );
   assert( lincons != NULL );
   assert( binvar != NULL );
   assert( slackvar != NULL );
 
   /* check whether lincons is really a linear constraint */
   conshdlr = SCIPconsGetHdlr(lincons);
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), "linear", SCIP_INVALIDDATA );
 
   /* find the indicator constraint handler */
   conshdlr = SCIPfindConshdlr(scip, CONSHDLR_NAME);
   if ( conshdlr == NULL )
   {
      SCIPerrorMessage("<%s> constraint handler not found.\n", CONSHDLR_NAME);
      return SCIP_PLUGINNOTFOUND;
   }
 
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
 
   if ( conshdlrdata->nolinconscont && ! conshdlrdata->sepaalternativelp )
   {
      SCIPerrorMessage("constraint handler <%s>: need parameter <sepaalternativelp> to be true if parameter <nolinconscont> is true.\n", CONSHDLR_NAME);
      return SCIP_INVALIDDATA;
   }
 
   /* determine whether the linear constraint needs to be active */
   nvars = SCIPgetNVarsLinear(scip, lincons);
   vars = SCIPgetVarsLinear(scip, lincons);
   linconsactive = ! conshdlrdata->nolinconscont;
   for ( v = 0; v < nvars && ! linconsactive; ++v )
   {
      if ( vars[v] == slackvar )
         continue;
 
      if ( SCIPvarIsIntegral(vars[v]) )
         linconsactive = TRUE;
   }
 
   /* Note that we do not change the type of the slackvariable here, because it might appear in other constraints and
    * the locks are note yet set up if we are copying. */
 
   /* mark slack variable not to be multi-aggregated */
   SCIP_CALL( SCIPmarkDoNotMultaggrVar(scip, slackvar) );
 
   /* mark linear constraint not to be upgraded - otherwise we loose control over it */
   SCIPconsAddUpgradeLocks(lincons, 1);
   assert( SCIPconsGetNUpgradeLocks(lincons) > 0 );
 
   /* check whether we should generate a bilinear constraint instead of an indicator constraint */
   if ( conshdlrdata->generatebilinear )
   {
      assert( linconsactive );
 
      SCIP_Real val = 1.0;
 
      /* if active on 0, the binary variable is negated */
      SCIP_VAR* binvarinternal;
      if ( activeone )
         binvarinternal = binvar;
      else
      {
         assert( SCIPvarIsBinary(binvar) );
         SCIP_CALL( SCIPgetNegatedVar(scip, binvar, &binvarinternal) );
      }
 
      /* create a quadratic constraint with a single bilinear term - note that cons is used */
      SCIP_CALL( SCIPcreateConsQuadraticNonlinear(scip, cons, name, 0, NULL, NULL, 1, &binvarinternal, &slackvar, &val, 0.0, 0.0,
            TRUE, TRUE, TRUE, TRUE, TRUE, FALSE, FALSE, FALSE, FALSE) );
   }
   else
   {
      /* create constraint data */
      SCIP_CALL( consdataCreate(scip, conshdlr, conshdlrdata, name, &consdata, conshdlrdata->eventhdlrrestart,
            binvar, activeone, TRUE, slackvar, lincons, linconsactive) );
      assert( consdata != NULL );
 
      /* create constraint */
      SCIP_CALL( SCIPcreateCons(scip, cons, name, conshdlr, consdata, initial, separate, enforce, check, propagate,
            local, modifiable, dynamic, removable, stickingatnode) );
 
      /* catch local bound change events on binary variable */
      if ( consdata->linconsactive && SCIPisTransformed(scip) )
      {
         SCIP_CALL( SCIPcatchVarEvent(scip, consdata->binvar, SCIP_EVENTTYPE_BOUNDCHANGED, conshdlrdata->eventhdlrbound, (SCIP_EVENTDATA*) *cons, NULL) );
         SCIP_CALL( SCIPcatchVarEvent(scip, consdata->slackvar, SCIP_EVENTTYPE_BOUNDCHANGED, conshdlrdata->eventhdlrbound, (SCIP_EVENTDATA*) *cons, NULL) );
      }
   }
 
   /* capture binary variable, slack variable, and linear constraint */
   if( consdata != NULL )
   {
      SCIP_CALL( SCIPcaptureVar(scip, consdata->binvar) );
   }
   SCIP_CALL( SCIPcaptureVar(scip, slackvar) );
   SCIP_CALL( SCIPcaptureCons(scip, lincons) );
 
   return SCIP_OKAY;
}
 
/** creates and captures an indicator constraint with given linear constraint and slack variable
 *
 *  @note @a binvar is checked to be binary only later. This enables a change of the type in
 *  procedures reading an instance.
 *
 *  @note we assume that @a slackvar actually appears in @a lincons and we also assume that it takes
 *  the role of a slack variable!
 *
 *  @note the constraint gets captured, hence at one point you have to release it using the method SCIPreleaseCons()
 */
SCIP_RETCODE SCIPcreateConsIndicatorLinCons(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_CONS**           cons,               /**< pointer to hold the created constraint */
   const char*           name,               /**< name of constraint */
   SCIP_VAR*             binvar,             /**< binary indicator variable */
   SCIP_CONS*            lincons,            /**< linear constraint */
   SCIP_VAR*             slackvar,           /**< slack variable */
   SCIP_Bool             initial,            /**< should the LP relaxation of constraint be in the initial LP? Usually set to TRUE. */
   SCIP_Bool             separate,           /**< should the constraint be separated during LP processing?
                                              *   Usually set to TRUE. */
   SCIP_Bool             enforce,            /**< should the constraint be enforced during node processing?
                                              *   TRUE for model constraints, FALSE for additional, redundant constraints. */
   SCIP_Bool             check,              /**< should the constraint be checked for feasibility?
                                              *   TRUE for model constraints, FALSE for additional, redundant constraints. */
   SCIP_Bool             propagate,          /**< should the constraint be propagated during node processing?
                                              *   Usually set to TRUE. */
   SCIP_Bool             local,              /**< is constraint only valid locally?
                                              *   Usually set to FALSE. Has to be set to TRUE, e.g., for branching constraints. */
   SCIP_Bool             dynamic,            /**< is constraint subject to aging?
                                              *   Usually set to FALSE. Set to TRUE for own cuts which
                                              *   are separated as constraints. */
   SCIP_Bool             removable,          /**< should the relaxation be removed from the LP due to aging or cleanup?
                                              *   Usually set to FALSE. Set to TRUE for 'lazy constraints' and 'user cuts'. */
   SCIP_Bool             stickingatnode      /**< should the constraint always be kept at the node where it was added, even
                                              *   if it may be moved to a more global node?
                                              *   Usually set to FALSE. Set to TRUE to for constraints that represent node data. */
   )
{
   return SCIPcreateConsIndicatorGenericLinCons(scip, cons, name, binvar, lincons, slackvar, TRUE, initial, separate,
      enforce, check, propagate, local, dynamic, removable, stickingatnode);
}
 
 
/** creates and captures an indicator constraint with given linear constraint and slack variable
 *  in its most basic version, i. e., all constraint flags are set to their basic value as explained for the
 *  method SCIPcreateConsIndicator(); all flags can be set via SCIPsetConsFLAGNAME-methods in scip.h
 *
 *  @note @a binvar is checked to be binary only later. This enables a change of the type in
 *  procedures reading an instance.
 *
 *  @note we assume that @a slackvar actually appears in @a lincons and we also assume that it takes
 *  the role of a slack variable!
 *
 *  @note the constraint gets captured, hence at one point you have to release it using the method SCIPreleaseCons()
 *
 *  @see SCIPcreateConsIndicatorLinCons() for information about the basic constraint flag configuration
 *
 *  @note the constraint gets captured, hence at one point you have to release it using the method SCIPreleaseCons()
 */
SCIP_RETCODE SCIPcreateConsBasicIndicatorLinCons(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_CONS**           cons,               /**< pointer to hold the created constraint */
   const char*           name,               /**< name of constraint */
   SCIP_VAR*             binvar,             /**< binary indicator variable */
   SCIP_CONS*            lincons,            /**< linear constraint */
   SCIP_VAR*             slackvar            /**< slack variable */
   )
{
   assert( scip != NULL );
 
   SCIP_CALL( SCIPcreateConsIndicatorLinCons(scip, cons, name, binvar, lincons, slackvar,
         TRUE, TRUE, TRUE, TRUE, TRUE, FALSE, FALSE, FALSE, FALSE) );
 
   return SCIP_OKAY;
}
 
 
/** creates and captures an indicator constraint with given linear constraint in a generic version, i. e., with a flag
 *  activeone indicating whether the constraint is active on value 1 or 0 of the binary variable; no slack variable is
 *  given
 
 *  @note @a binvar is checked to be binary only later. This enables a change of the type in
 *  procedures reading an instance.
 *
 *  @note The linear constraint must be single-sided, i.e., either rhs or lhs have to be infinite.
 *
 *  @note the constraint gets captured, hence at one point you have to release it using the method SCIPreleaseCons()
 *
 *  @see SCIPcreateConsIndicatorLinCons() for information about the basic constraint flag configuration
 */
SCIP_RETCODE SCIPcreateConsIndicatorGenericLinConsPure(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_CONS**           cons,               /**< pointer to hold the created constraint */
   const char*           name,               /**< name of constraint */
   SCIP_VAR*             binvar,             /**< binary indicator variable */
   SCIP_CONS*            lincons,            /**< linear constraint */
   SCIP_Bool             activeone,          /**< is the constraint active when the binary is 1? */
   SCIP_Bool             initial,            /**< should the LP relaxation of constraint be in the initial LP? Usually set to TRUE. */
   SCIP_Bool             separate,           /**< should the constraint be separated during LP processing?
                                              *   Usually set to TRUE. */
   SCIP_Bool             enforce,            /**< should the constraint be enforced during node processing?
                                              *   TRUE for model constraints, FALSE for additional, redundant constraints. */
   SCIP_Bool             check,              /**< should the constraint be checked for feasibility?
                                              *   TRUE for model constraints, FALSE for additional, redundant constraints. */
   SCIP_Bool             propagate,          /**< should the constraint be propagated during node processing?
                                              *   Usually set to TRUE. */
   SCIP_Bool             local,              /**< is constraint only valid locally?
                                              *   Usually set to FALSE. Has to be set to TRUE, e.g., for branching constraints. */
   SCIP_Bool             dynamic,            /**< is constraint subject to aging?
                                              *   Usually set to FALSE. Set to TRUE for own cuts which
                                              *   are separated as constraints. */
   SCIP_Bool             removable,          /**< should the relaxation be removed from the LP due to aging or cleanup?
                                              *   Usually set to FALSE. Set to TRUE for 'lazy constraints' and 'user cuts'. */
   SCIP_Bool             stickingatnode      /**< should the constraint always be kept at the node where it was added, even
                                              *   if it may be moved to a more global node?
                                              *   Usually set to FALSE. Set to TRUE to for constraints that represent node data. */
   )
{
   char s[SCIP_MAXSTRLEN];
   SCIP_CONSHDLR* conshdlr;
   SCIP_CONSHDLRDATA* conshdlrdata;
   SCIP_CONSDATA* consdata = NULL;
   SCIP_VAR** vars;
   SCIP_VAR* binvarinternal;
   SCIP_VAR* slackvar = NULL;
   SCIP_Bool modifiable = FALSE;
   SCIP_Bool linconsactive;
   SCIP_Bool integral = TRUE;
   SCIP_Real* vals;
   SCIP_Real sign;
   SCIP_Real lhs;
   SCIP_Real rhs;
   int nvars;
   int v;
 
   assert( scip != NULL );
   assert( lincons != NULL );
   assert( binvar != NULL );
 
   /* check whether lincons is really a linear constraint */
   conshdlr = SCIPconsGetHdlr(lincons);
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), "linear", SCIP_INVALIDDATA );
 
   /* find the indicator constraint handler */
   conshdlr = SCIPfindConshdlr(scip, CONSHDLR_NAME);
   if ( conshdlr == NULL )
   {
      SCIPerrorMessage("<%s> constraint handler not found.\n", CONSHDLR_NAME);
      return SCIP_PLUGINNOTFOUND;
   }
 
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
 
   if ( conshdlrdata->nolinconscont && ! conshdlrdata->sepaalternativelp )
   {
      SCIPerrorMessage("constraint handler <%s>: need parameter <sepaalternativelp> to be true if parameter <nolinconscont> is true.\n", CONSHDLR_NAME);
      return SCIP_INVALIDDATA;
   }
 
   lhs = SCIPgetLhsLinear(scip, lincons);
   rhs = SCIPgetRhsLinear(scip, lincons);
   if ( ! SCIPisInfinity(scip, -lhs) && ! SCIPisInfinity(scip, rhs) )
   {
      SCIPerrorMessage("Lincons constraint has finite lhs and rhs.\n");
      return SCIP_INVALIDDATA;
   }
 
   /* determine integrality of slack variable and whether problem is decomposed if no variables are integral */
   nvars = SCIPgetNVarsLinear(scip, lincons);
   vars = SCIPgetVarsLinear(scip, lincons);
   vals = SCIPgetValsLinear(scip, lincons);
   linconsactive = !conshdlrdata->nolinconscont;
   for ( v = 0; v < nvars; ++v )
   {
      if ( SCIPvarIsIntegral(vars[v]) )
      {
         linconsactive = TRUE;
         if ( !SCIPisIntegral(scip, vals[v]) )
            integral = FALSE;
      }
      else
         integral = FALSE;
 
      /* check whether variable is marked to not be multi-aggregated: this should only be the case for slack variables
       * added by the indicator constraint handler */
      if ( SCIPdoNotMultaggrVar(scip, vars[v]) )
      {
         /* double check name */
         if ( strncmp(SCIPvarGetName(vars[v]), "indslack", 8) == 0 )
         {
            SCIPerrorMessage("Linear constraint <%s> already used in an indicator constraint.\n", SCIPconsGetName(lincons));
            return SCIP_INVALIDDATA;
         }
      }
   }
 
   /* if active on 0, the binary variable is negated */
   if ( activeone )
      binvarinternal = binvar;
   else
   {
      assert( SCIPvarIsBinary(binvar) );
      SCIP_CALL( SCIPgetNegatedVar(scip, binvar, &binvarinternal) );
   }
 
   /* Check whether the same slack variable should be use for constraints with a common binary variable. This can
    * reduce the size of the problem, because only one coupling constraint is needed. However, it is less tight. */
   if ( conshdlrdata->usesameslackvar && conshdlrdata->binslackvarhash == NULL )
   {
      SCIP_CALL( SCIPhashmapCreate(&conshdlrdata->binslackvarhash, SCIPblkmem(scip), SCIPgetNOrigVars(scip)) );
   }
 
   if ( conshdlrdata->binslackvarhash != NULL && SCIPhashmapExists(conshdlrdata->binslackvarhash, (void*) binvarinternal) )
   {
      /* determine slack variable */
      slackvar = (SCIP_VAR*) SCIPhashmapGetImage(conshdlrdata->binslackvarhash, (void*) binvarinternal);
 
      /* make sure that the type of the slack is as general as necessary */
      if ( !integral && SCIPvarIsIntegral(slackvar) )
      {
         SCIP_Bool infeasible;
 
         SCIP_CALL( SCIPchgVarType(scip, slackvar, SCIP_VARTYPE_CONTINUOUS, &infeasible) );
         assert( !infeasible );
         SCIP_CALL( SCIPchgVarImplType(scip, slackvar, SCIP_IMPLINTTYPE_NONE, &infeasible) );
         assert( !infeasible );
      }
 
      SCIP_CALL( SCIPcaptureVar(scip, slackvar) );
   }
   else
   {
      /* create slack variable */
      (void) SCIPsnprintf(s, SCIP_MAXSTRLEN, "indslack_%s", name);
      SCIP_CALL( SCIPcreateVarImpl(scip, &slackvar, s, 0.0, SCIPinfinity(scip), 0.0,
            SCIP_VARTYPE_CONTINUOUS, integral ? SCIP_IMPLINTTYPE_WEAK : SCIP_IMPLINTTYPE_NONE,
            TRUE, FALSE, NULL, NULL, NULL, NULL, NULL) );
 
      SCIP_CALL( SCIPaddVar(scip, slackvar) );
 
      /* mark slack variable not to be multi-aggregated */
      SCIP_CALL( SCIPmarkDoNotMultaggrVar(scip, slackvar) );
 
      if ( conshdlrdata->binslackvarhash != NULL )
      {
         SCIP_CALL( SCIPhashmapInsert(conshdlrdata->binslackvarhash, (void*) binvarinternal, (void*) slackvar) );
      }
   }
   assert( slackvar != NULL );
 
   /* determine sign of slack variable */
   sign = -1.0;
   if ( SCIPisInfinity(scip, rhs) )
      sign = 1.0;
 
   /* add slack variable */
   SCIP_CALL( SCIPaddCoefLinear(scip, lincons, slackvar, sign) );
 
   /* mark linear constraint not to be upgraded - otherwise we loose control over it */
   SCIPconsAddUpgradeLocks(lincons, 1);
   assert( SCIPconsGetNUpgradeLocks(lincons) > 0 );
 
   /* check whether we should generate a bilinear constraint instead of an indicator constraint */
   if ( conshdlrdata->generatebilinear )
   {
      assert( linconsactive );
 
      SCIP_Real val = 1.0;
 
      /* create a quadratic constraint with a single bilinear term - note that cons is used */
      SCIP_CALL( SCIPcreateConsQuadraticNonlinear(scip, cons, name, 0, NULL, NULL, 1, &binvarinternal, &slackvar, &val, 0.0, 0.0,
            TRUE, TRUE, TRUE, TRUE, TRUE, FALSE, FALSE, FALSE, FALSE) );
   }
   else
   {
      /* create constraint data */
      SCIP_CALL( consdataCreate(scip, conshdlr, conshdlrdata, name, &consdata, conshdlrdata->eventhdlrrestart,
            binvar, activeone, TRUE, slackvar, lincons, linconsactive) );
      assert( consdata != NULL );
 
      /* create constraint */
      SCIP_CALL( SCIPcreateCons(scip, cons, name, conshdlr, consdata, initial, separate, enforce, check, propagate,
            local, modifiable, dynamic, removable, stickingatnode) );
 
      /* catch local bound change events on binary variable */
      if ( consdata->linconsactive && SCIPisTransformed(scip) )
      {
         SCIP_CALL( SCIPcatchVarEvent(scip, consdata->binvar, SCIP_EVENTTYPE_BOUNDCHANGED, conshdlrdata->eventhdlrbound, (SCIP_EVENTDATA*) *cons, NULL) );
         SCIP_CALL( SCIPcatchVarEvent(scip, consdata->slackvar, SCIP_EVENTTYPE_BOUNDCHANGED, conshdlrdata->eventhdlrbound, (SCIP_EVENTDATA*) *cons, NULL) );
      }
   }
 
   /* capture binary variable and linear constraint */
   if( consdata != NULL )
   {
      SCIP_CALL( SCIPcaptureVar(scip, consdata->binvar) );
   }
   SCIP_CALL( SCIPcaptureCons(scip, lincons) );
 
   return SCIP_OKAY;
}
 
 
/** creates and captures an indicator constraint with given linear constraint; no slack variable is specified
 *
 *  @note @a binvar is checked to be binary only later. This enables a change of the type in
 *  procedures reading an instance.
 *
 *  @note The linear constraint has to be single sided only, i.e., either rhs or lhs have to be infinite.
 *
 *  @note the constraint gets captured, hence at one point you have to release it using the method SCIPreleaseCons()
 */
SCIP_RETCODE SCIPcreateConsIndicatorLinConsPure(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_CONS**           cons,               /**< pointer to hold the created constraint */
   const char*           name,               /**< name of constraint */
   SCIP_VAR*             binvar,             /**< binary indicator variable */
   SCIP_CONS*            lincons,            /**< linear constraint */
   SCIP_Bool             initial,            /**< should the LP relaxation of constraint be in the initial LP? Usually set to TRUE. */
   SCIP_Bool             separate,           /**< should the constraint be separated during LP processing?
                                              *   Usually set to TRUE. */
   SCIP_Bool             enforce,            /**< should the constraint be enforced during node processing?
                                              *   TRUE for model constraints, FALSE for additional, redundant constraints. */
   SCIP_Bool             check,              /**< should the constraint be checked for feasibility?
                                              *   TRUE for model constraints, FALSE for additional, redundant constraints. */
   SCIP_Bool             propagate,          /**< should the constraint be propagated during node processing?
                                              *   Usually set to TRUE. */
   SCIP_Bool             local,              /**< is constraint only valid locally?
                                              *   Usually set to FALSE. Has to be set to TRUE, e.g., for branching constraints. */
   SCIP_Bool             dynamic,            /**< is constraint subject to aging?
                                              *   Usually set to FALSE. Set to TRUE for own cuts which
                                              *   are separated as constraints. */
   SCIP_Bool             removable,          /**< should the relaxation be removed from the LP due to aging or cleanup?
                                              *   Usually set to FALSE. Set to TRUE for 'lazy constraints' and 'user cuts'. */
   SCIP_Bool             stickingatnode      /**< should the constraint always be kept at the node where it was added, even
                                              *   if it may be moved to a more global node?
                                              *   Usually set to FALSE. Set to TRUE to for constraints that represent node data. */
   )
{
   return SCIPcreateConsIndicatorGenericLinConsPure(scip, cons, name, binvar, lincons, TRUE, initial, separate,
      enforce, check, propagate, local, dynamic, removable, stickingatnode);
}
 
 
/** adds variable to the inequality of the indicator constraint */
SCIP_RETCODE SCIPaddVarIndicator(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_CONS*            cons,               /**< indicator constraint */
   SCIP_VAR*             var,                /**< variable to add to the inequality */
   SCIP_Real             val                 /**< value of variable */
   )
{
   SCIP_CONSDATA* consdata;
 
   assert( cons != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(SCIPconsGetHdlr(cons)), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   consdata = SCIPconsGetData(cons);
   assert( consdata != NULL );
 
   /* if linear inequality is flipped, variable is added with negative coefficient */
   if ( !consdata->lessthanineq )
      val = -val;
 
   SCIP_CALL( SCIPaddCoefLinear(scip, consdata->lincons, var, val) );
 
   /* make sure that the type of the slack is as general as necessary */
   if ( ( !SCIPvarIsIntegral(var) || !SCIPisIntegral(scip, val) ) && SCIPvarIsIntegral(consdata->slackvar) )
   {
      SCIP_Bool infeasible;
 
      SCIP_CALL( SCIPchgVarType(scip, consdata->slackvar, SCIP_VARTYPE_CONTINUOUS, &infeasible) );
      assert( !infeasible );
      SCIP_CALL( SCIPchgVarImplType(scip, consdata->slackvar, SCIP_IMPLINTTYPE_NONE, &infeasible) );
      assert( !infeasible );
   }
 
   return SCIP_OKAY;
}
 
 
/** gets the linear constraint corresponding to the indicator constraint (may be NULL) */
SCIP_CONS* SCIPgetLinearConsIndicator(
   SCIP_CONS*            cons                /**< indicator constraint */
   )
{
   SCIP_CONSDATA* consdata;
 
   assert( cons != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(SCIPconsGetHdlr(cons)), CONSHDLR_NAME, NULL );
 
   consdata = SCIPconsGetData(cons);
   assert( consdata != NULL );
 
   return consdata->lincons;
}
 
 
/** sets the linear constraint corresponding to the indicator constraint (may be NULL) */
SCIP_RETCODE SCIPsetLinearConsIndicator(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_CONS*            cons,               /**< indicator constraint */
   SCIP_CONS*            lincons             /**< linear constraint */
   )
{
   SCIP_CONSHDLR* conshdlr;
   SCIP_CONSHDLRDATA* conshdlrdata;
   SCIP_CONSDATA* consdata;
 
   if ( SCIPgetStage(scip) != SCIP_STAGE_PROBLEM )
   {
      SCIPerrorMessage("Cannot set linear constraint in SCIP stage <%d>\n", SCIPgetStage(scip) );
      return SCIP_INVALIDCALL;
   }
 
   assert( cons != NULL );
   conshdlr = SCIPconsGetHdlr(cons);
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   conshdlrdata = SCIPconshdlrGetData(conshdlr);
   assert( conshdlrdata != NULL );
 
   consdata = SCIPconsGetData(cons);
   assert( consdata != NULL );
 
   /* free old linear constraint */
   assert( consdata->lincons != NULL );
   SCIP_CALL( SCIPdelCons(scip, consdata->lincons) );
   SCIP_CALL( SCIPreleaseCons(scip, &(consdata->lincons) ) );
 
   assert( lincons != NULL );
   consdata->lincons = lincons;
   consdata->linconsactive = !conshdlrdata->nolinconscont;
   SCIP_CALL( SCIPcaptureCons(scip, lincons) );
 
   /* determine whether problem is decomposed if no variables are integral */
   if ( !consdata->linconsactive )
   {
      SCIP_VAR** vars = SCIPgetVarsLinear(scip, lincons);
      int nvars = SCIPgetNVarsLinear(scip, lincons);
      int v;
 
      for ( v = 0; v < nvars; ++v )
      {
         if ( SCIPvarIsIntegral(vars[v]) )
         {
            consdata->linconsactive = TRUE;
            break;
         }
      }
   }
 
   return SCIP_OKAY;
}
 
/** gets activation value of an indicator constraint, TRUE for active on 1, FALSE for active on 0 */
SCIP_Bool SCIPgetActiveOnIndicator(
   SCIP_CONS*            cons                /**< indicator constraint */
   )
{
   SCIP_CONSDATA* consdata;
 
   assert( cons != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(SCIPconsGetHdlr(cons)), CONSHDLR_NAME, FALSE );
 
   consdata = SCIPconsGetData(cons);
   assert( consdata != NULL );
 
   return consdata->activeone;
}
 
 
/** gets binary variable corresponding to indicator constraint */
SCIP_VAR* SCIPgetBinaryVarIndicator(
   SCIP_CONS*            cons                /**< indicator constraint */
   )
{
   SCIP_CONSDATA* consdata;
 
   assert( cons != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(SCIPconsGetHdlr(cons)), CONSHDLR_NAME, NULL );
 
   consdata = SCIPconsGetData(cons);
   assert( consdata != NULL );
 
   return consdata->binvar;
}
 
/** similar to SCIPgetBinaryVarIndicator but returns the original binary variable passed by the user. */
SCIP_VAR* SCIPgetBinaryVarIndicatorGeneric(
   SCIP_CONS*            cons                /**< indicator constraint */
   )
{
   SCIP_CONSDATA* consdata;
   SCIP_VAR* binvar;
 
   assert(cons != NULL);
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(SCIPconsGetHdlr(cons)), CONSHDLR_NAME, NULL );
 
   consdata = SCIPconsGetData(cons);
   assert(consdata != NULL);
   binvar = consdata->binvar;
 
   if ( ! consdata->activeone )
      binvar = SCIPvarGetNegationVar(binvar);
   assert(binvar != NULL);
 
   return binvar;
}
 
/** sets binary indicator variable for indicator constraint */
SCIP_RETCODE SCIPsetBinaryVarIndicator(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_CONS*            cons,               /**< indicator constraint */
   SCIP_VAR*             binvar              /**< binary variable to add to the inequality */
   )
{
   SCIP_CONSDATA* consdata;
 
   assert( cons != NULL );
   assert( binvar != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(SCIPconsGetHdlr(cons)), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   consdata = SCIPconsGetData(cons);
   assert( consdata != NULL );
 
   /* check type */
   if ( !SCIPvarIsBinary(binvar) || SCIPvarIsImpliedIntegral(binvar) )
   {
      SCIPerrorMessage("Indicator variable <%s> is not binary %d.\n", SCIPvarGetName(binvar), SCIPvarGetType(binvar));
      return SCIP_ERROR;
   }
 
   /* check previous binary variable */
   if ( consdata->binvar != NULL )
   {
      /* to allow replacement of binary variables, we would need to drop events etc. */
      SCIPerrorMessage("Cannot replace binary variable <%s> for indicator constraint <%s>.\n", SCIPvarGetName(binvar), SCIPconsGetName(cons));
      return SCIP_INVALIDCALL;
   }
 
   /* if we are transformed, obtain transformed variables and catch events */
   if ( SCIPconsIsTransformed(cons) )
   {
      SCIP_VAR* var;
      SCIP_CONSHDLR* conshdlr;
      SCIP_CONSHDLRDATA* conshdlrdata;
 
      /* make sure we have a transformed binary variable */
      /* coverity[copy_paste_error] */
      SCIP_CALL( SCIPgetTransformedVar(scip, binvar, &var) );
      assert( var != NULL );
      if ( ! consdata->activeone )
         SCIP_CALL( SCIPgetNegatedVar(scip, var, &var) );
 
      SCIP_CALL( SCIPcaptureVar(scip, var) );
      consdata->binvar = var;
 
      conshdlr = SCIPconsGetHdlr(cons);
      assert( conshdlr != NULL );
 
      SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
      conshdlrdata = SCIPconshdlrGetData(conshdlr);
      assert( conshdlrdata != NULL );
      assert( conshdlrdata->eventhdlrbound != NULL );
      assert( conshdlrdata->eventhdlrrestart != NULL );
 
      /* catch local bound change events on binary variable */
      if ( consdata->linconsactive )
      {
         SCIP_CALL( SCIPcatchVarEvent(scip, var, SCIP_EVENTTYPE_BOUNDCHANGED, conshdlrdata->eventhdlrbound, (SCIP_EVENTDATA*) cons, NULL) );
      }
 
      /* catch global bound change events on binary variable */
      if ( conshdlrdata->forcerestart )
      {
         SCIP_CALL( SCIPcatchVarEvent(scip, var, SCIP_EVENTTYPE_GBDCHANGED, conshdlrdata->eventhdlrrestart, (SCIP_EVENTDATA*) conshdlrdata, NULL) );
      }
 
      /* if binary variable is fixed to be nonzero */
      if ( SCIPvarGetLbLocal(var) > 0.5 )
         ++(consdata->nfixednonzero);
   }
   else
   {
      if ( ! consdata->activeone )
         SCIP_CALL( SCIPgetNegatedVar(scip, binvar, &binvar) );
 
      SCIP_CALL( SCIPcaptureVar(scip, binvar) );
      consdata->binvar = binvar;
   }
 
   return SCIP_OKAY;
}
 
/** gets slack variable corresponding to indicator constraint */
SCIP_VAR* SCIPgetSlackVarIndicator(
   SCIP_CONS*            cons                /**< indicator constraint */
   )
{
   SCIP_CONSDATA* consdata;
 
   assert( cons != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(SCIPconsGetHdlr(cons)), CONSHDLR_NAME, NULL );
 
   consdata = SCIPconsGetData(cons);
   assert( consdata != NULL );
 
   return consdata->slackvar;
}
 
 
/** sets upper bound for slack variable corresponding to indicator constraint
 *
 *  Use with care if you know that the maximal violation of the corresponding constraint is at most @p ub. This bound
 *  might be improved automatically during the solution process.
 *
 *  @pre This method should only be called if SCIP is in one of the following stages:
 *       - \ref SCIP_STAGE_INIT
 *       - \ref SCIP_STAGE_PROBLEM
 */
SCIP_RETCODE SCIPsetSlackVarUb(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_CONS*            cons,               /**< indicator constraint */
   SCIP_Real             ub                  /**< upper bound for slack variable */
   )
{
   SCIP_CONSDATA* consdata;
 
   assert( scip != NULL );
   assert( cons != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(SCIPconsGetHdlr(cons)), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   consdata = SCIPconsGetData(cons);
   assert( consdata != NULL );
 
   if ( SCIPgetStage(scip) > SCIP_STAGE_PROBLEM )
      return SCIP_OKAY;
 
   assert( consdata->slackvar != NULL );
   SCIP_CALL( SCIPchgVarUb(scip, consdata->slackvar, ub) );
 
   return SCIP_OKAY;
}
 
 
/** checks whether indicator constraint is violated w.r.t. sol */
SCIP_Bool SCIPisViolatedIndicator(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_CONS*            cons,               /**< indicator constraint */
   SCIP_SOL*             sol                 /**< solution, or NULL to use current node's solution */
   )
{
   SCIP_CONSDATA* consdata;
 
   assert( cons != NULL );
 
   /* deleted constraints should always be satisfied */
   if ( SCIPconsIsDeleted(cons) )
      return FALSE;
 
   consdata = SCIPconsGetData(cons);
   assert( consdata != NULL );
 
   if ( consdata->linconsactive )
   {
      assert( consdata->slackvar != NULL );
      assert( consdata->binvar != NULL );
      return(
         SCIPisFeasPositive(scip, SCIPgetSolVal(scip, sol, consdata->slackvar)) &&
         SCIPisFeasPositive(scip, SCIPgetSolVal(scip, sol, consdata->binvar)) );
   }
 
   /* @todo: check how this can be decided for linconsactive == FALSE */
   return TRUE;
}
 
 
/** based on values of other variables, computes slack and binary variable to turn constraint feasible
 *
 *  It will also clean up the solution, i.e., shift slack variable, as follows:
 *
 *  If the inequality is \f$a^T x + \gamma\, s \leq \beta\f$, the value of the slack variable
 *  \f$s\f$ to achieve equality is
 *  \f[
 *      s^* = \frac{\beta - a^T x^*}{\gamma},
 *  \f]
 *  where \f$x^*\f$ is the given solution. In case of \f$a^T x + \gamma\, s \geq \alpha\f$, we
 *  arrive at
 *  \f[
 *      s^* = \frac{\alpha - a^T x^*}{\gamma}.
 *  \f]
 *  The typical values of \f$\gamma\f$ in the first case is -1 and +1 in the second case.
 *
 *  Now, let \f$\sigma\f$ be the sign of \f$\gamma\f$ in the first case and \f$-\gamma\f$ in the
 *  second case. Thus, if \f$\sigma > 0\f$ and \f$s^* < 0\f$, the inequality cannot be satisfied by
 *  a nonnegative value for the slack variable; in this case, we have to leave the values as they
 *  are. If \f$\sigma < 0\f$ and \f$s^* > 0\f$, the solution violates the indicator constraint (we
 *  can set the slack variable to value \f$s^*\f$). If \f$\sigma < 0\f$ and \f$s^* \leq 0\f$ or
 *  \f$\sigma > 0\f$ and \f$s^* \geq 0\f$, the constraint is satisfied, and we can set the slack
 *  variable to 0.
 */
SCIP_RETCODE SCIPmakeIndicatorFeasible(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_CONS*            cons,               /**< indicator constraint */
   SCIP_SOL*             sol,                /**< solution */
   SCIP_Bool*            changed             /**< pointer to store whether the solution has been changed */
   )
{
   SCIP_CONSDATA* consdata;
   SCIP_CONS* lincons;
   SCIP_VAR** linvars;
   SCIP_Real* linvals;
   SCIP_VAR* slackvar;
   SCIP_VAR* binvar;
   SCIP_Real slackcoef;
   SCIP_Real sum;
   SCIP_Real val;
   int nlinvars;
   int sigma;
   int v;
 
   assert( cons != NULL );
   assert( sol != NULL );
   assert( changed != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(SCIPconsGetHdlr(cons)), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   *changed = FALSE;
 
   /* avoid deleted indicator constraints, e.g., due to preprocessing */
   if ( ! SCIPconsIsActive(cons) && SCIPgetStage(scip) >= SCIP_STAGE_INITPRESOLVE )
      return SCIP_OKAY;
 
   assert( cons != NULL );
   consdata = SCIPconsGetData(cons);
   assert( consdata != NULL );
 
   /* if the linear constraint is not present, we cannot do anything */
   if ( ! consdata->linconsactive )
      return SCIP_OKAY;
 
   lincons = consdata->lincons;
   assert( lincons != NULL );
 
   /* avoid non-active linear constraints, e.g., due to preprocessing */
   if ( SCIPconsIsActive(lincons) || SCIPgetStage(scip) < SCIP_STAGE_INITPRESOLVE )
   {
      slackvar = consdata->slackvar;
      binvar = consdata->binvar;
      assert( slackvar != NULL );
      assert( binvar != NULL );
 
      nlinvars = SCIPgetNVarsLinear(scip, lincons);
      linvars = SCIPgetVarsLinear(scip, lincons);
      linvals = SCIPgetValsLinear(scip, lincons);
 
      /* compute value of regular variables */
      sum = 0.0;
      slackcoef = 0.0;
      for (v = 0; v < nlinvars; ++v)
      {
         SCIP_VAR* var;
         var = linvars[v];
         if ( var != slackvar )
            sum += linvals[v] * SCIPgetSolVal(scip, sol, var);
         else
            slackcoef = linvals[v];
      }
 
      /* do nothing if slack variable does not appear */
      if ( SCIPisFeasZero(scip, slackcoef) )
         return SCIP_OKAY;
 
      assert( ! SCIPisZero(scip, slackcoef) );
      assert( slackcoef != 0.0 );  /* to satisfy lint */
      assert( SCIPisInfinity(scip, -SCIPgetLhsLinear(scip, lincons)) || SCIPisInfinity(scip, SCIPgetRhsLinear(scip, lincons)) );
      assert( SCIPisFeasGE(scip, SCIPvarGetLbLocal(slackvar), 0.0) );
 
      val = SCIPgetRhsLinear(scip, lincons);
      sigma = 1;
      if ( SCIPisInfinity(scip, val) )
      {
         val = SCIPgetLhsLinear(scip, lincons);
         assert( ! SCIPisInfinity(scip, REALABS(val)) );
         sigma = -1;
      }
      /* compute value of slack that would achieve equality */
      val = (val - sum)/slackcoef;
 
      /* compute direction into which slack variable would be infeasible */
      if ( slackcoef < 0 )
         sigma *= -1;
 
      /* filter out cases in which no sensible change is possible */
      if ( sigma > 0 && SCIPisFeasNegative(scip, val) )
         return SCIP_OKAY;
 
      /* check if linear constraint w/o slack variable is violated */
      if ( sigma < 0 && SCIPisFeasPositive(scip, val) )
      {
         /* the original constraint is violated */
         if ( ! SCIPisFeasEQ(scip, SCIPgetSolVal(scip, sol, slackvar), val) )
         {
            SCIP_CALL( SCIPsetSolVal(scip, sol, slackvar, val) );
            *changed = TRUE;
         }
         /* check whether binary variable is fixed or its negated variable is fixed */
         if ( SCIPvarGetStatus(binvar) != SCIP_VARSTATUS_FIXED &&
            ( SCIPvarGetStatus(binvar) != SCIP_VARSTATUS_NEGATED || SCIPvarGetStatus(SCIPvarGetNegationVar(binvar)) != SCIP_VARSTATUS_FIXED ) )
         {
            if ( ! SCIPisFeasEQ(scip, SCIPgetSolVal(scip, sol, binvar), 0.0) )
            {
               SCIP_CALL( SCIPsetSolVal(scip, sol, binvar, 0.0) );
               *changed = TRUE;
            }
         }
      }
      else
      {
         assert( SCIPisFeasGE(scip, val * ((SCIP_Real) sigma), 0.0) );
 
         /* the original constraint is satisfied - we can set the slack variable to 0 (slackvar
          * should only occur in this indicator constraint) */
         if ( ! SCIPisFeasEQ(scip, SCIPgetSolVal(scip, sol, slackvar), 0.0) && SCIPisFeasPositive(scip, SCIPvarGetLbLocal(slackvar)) )
         {
            SCIP_CALL( SCIPsetSolVal(scip, sol, slackvar, 0.0) );
            *changed = TRUE;
         }
 
         /* check whether binary variable is fixed or its negated variable is fixed */
         if ( SCIPvarGetStatus(binvar) != SCIP_VARSTATUS_FIXED &&
            ( SCIPvarGetStatus(binvar) != SCIP_VARSTATUS_NEGATED || SCIPvarGetStatus(SCIPvarGetNegationVar(binvar)) != SCIP_VARSTATUS_FIXED ) )
         {
            SCIP_Real obj;
            obj = varGetObjDelta(binvar);
 
            /* check objective for possibly setting binary variable */
            if ( obj <= 0 )
            {
               /* setting variable to 1 does not increase objective - check whether we can set it to 1 */
               if ( ! SCIPisFeasEQ(scip, SCIPgetSolVal(scip, sol, binvar), 1.0) )
               {
                  /* check whether variable only occurs in the current constraint */
                  if ( SCIPvarGetNLocksUpType(binvar, SCIP_LOCKTYPE_MODEL) <= 1 )
                  {
                     SCIP_CALL( SCIPsetSolVal(scip, sol, binvar, 1.0) );
                     *changed = TRUE;
                     /* make sure that the other case does not occur if obj = 0: prefer variables set to 1 */
                     obj = -1.0;
                  }
               }
               else
               {
                  /* make sure that the other case does not occur if obj = 0: prefer variables set to 1 */
                  obj = -1.0;
               }
            }
            if ( obj >= 0 )
            {
               /* setting variable to 0 does not increase objective -> check whether variable only occurs in the current constraint
                * note: binary variables are only locked up */
               if ( SCIPvarGetNLocksDownType(binvar, SCIP_LOCKTYPE_MODEL) <= 0
                  && ! SCIPisFeasEQ(scip, SCIPgetSolVal(scip, sol, binvar), 0.0) )
               {
                  SCIP_CALL( SCIPsetSolVal(scip, sol, binvar, 0.0) );
                  *changed = TRUE;
               }
            }
         }
      }
   }
 
   return SCIP_OKAY;
}
 
 
/** based on values of other variables, computes slack and binary variable to turn all constraints feasible */
SCIP_RETCODE SCIPmakeIndicatorsFeasible(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_CONSHDLR*        conshdlr,           /**< indicator constraint handler */
   SCIP_SOL*             sol,                /**< solution */
   SCIP_Bool*            changed             /**< pointer to store whether the solution has been changed */
   )
{
   SCIP_CONS** conss;
   int nconss;
   int c;
 
   assert( conshdlr != NULL );
   assert( sol != NULL );
   assert( changed != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   *changed = FALSE;
 
   /* only run after or in presolving */
   if ( SCIPgetStage(scip) < SCIP_STAGE_INITPRESOLVE )
      return SCIP_OKAY;
 
   conss = SCIPconshdlrGetConss(conshdlr);
   nconss = SCIPconshdlrGetNConss(conshdlr);
 
   for (c = 0; c < nconss; ++c)
   {
      SCIP_CONSDATA* consdata;
      SCIP_Bool chg = FALSE;
      assert( conss[c] != NULL );
 
      consdata = SCIPconsGetData(conss[c]);
      assert( consdata != NULL );
 
      /* if the linear constraint is not present, we stop */
      if ( ! consdata->linconsactive )
         break;
 
      SCIP_CALL( SCIPmakeIndicatorFeasible(scip, conss[c], sol, &chg) );
      *changed = *changed || chg;
   }
 
   return SCIP_OKAY;
}
 
 
/** adds additional linear constraint that is not connected with an indicator constraint, but can be used for separation */
SCIP_RETCODE SCIPaddLinearConsIndicator(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_CONSHDLR*        conshdlr,           /**< indicator constraint handler */
   SCIP_CONS*            lincons             /**< linear constraint */
   )
{
   assert( scip != NULL );
   assert( lincons != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   /* do not add locally valid constraints (this would require much more bookkeeping) */
   if ( ! SCIPconsIsLocal(lincons) && ! SCIPconsIsModifiable(lincons) )
   {
      SCIP_CONSHDLRDATA* conshdlrdata;
 
      conshdlrdata = SCIPconshdlrGetData(conshdlr);
      assert( conshdlrdata != NULL );
 
      SCIP_CALL( consdataEnsureAddLinConsSize(scip, conshdlr, conshdlrdata->naddlincons+1) );
      assert( conshdlrdata->naddlincons+1 <= conshdlrdata->maxaddlincons );
 
      conshdlrdata->addlincons[conshdlrdata->naddlincons++] = lincons;
   }
 
   return SCIP_OKAY;
}
 
 
/** adds additional row that is not connected with an indicator constraint, but can be used for separation
 *
 *  @note The row is directly added to the alternative polyhedron and is not stored.
 */
SCIP_RETCODE SCIPaddRowIndicator(
   SCIP*                 scip,               /**< SCIP data structure */
   SCIP_CONSHDLR*        conshdlr,           /**< indicator constraint handler */
   SCIP_ROW*             row                 /**< row to add */
   )
{
   assert( scip != NULL );
   assert( row != NULL );
 
   SCIP_STRINGEQ( SCIPconshdlrGetName(conshdlr), CONSHDLR_NAME, SCIP_INVALIDCALL );
 
   /* skip local cuts (local cuts would require to dynamically add and remove columns from the alternative polyhedron */
   if ( ! SCIProwIsLocal(row) )
   {
      int colindex;
      SCIP_CONSHDLRDATA* conshdlrdata;
 
      conshdlrdata = SCIPconshdlrGetData(conshdlr);
      assert( conshdlrdata != NULL );
 
      /* do not add rows if we do not separate */
      if ( ! conshdlrdata->sepaalternativelp )
         return SCIP_OKAY;
 
      SCIPdebugMsg(scip, "Adding row <%s> to alternative LP.\n", SCIProwGetName(row));
 
      /* add row directly to alternative polyhedron */
      SCIP_CALL( addAltLPRow(scip, conshdlr, row, 0.0, &colindex) );
   }
 
   return SCIP_OKAY;
}