lpi_qso.c

Go to the documentation of this file.

/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
/*                                                                           */
/*                  This file is part of the program and library             */
/*         SCIP --- Solving Constraint Integer Programs                      */
/*                                                                           */
/*  Copyright (c) 2002-2025 Zuse Institute Berlin (ZIB)                      */
/*                                                                           */
/*  Licensed under the Apache License, Version 2.0 (the "License");          */
/*  you may not use this file except in compliance with the License.         */
/*  You may obtain a copy of the License at                                  */
/*                                                                           */
/*      http://www.apache.org/licenses/LICENSE-2.0                           */
/*                                                                           */
/*  Unless required by applicable law or agreed to in writing, software      */
/*  distributed under the License is distributed on an "AS IS" BASIS,        */
/*  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. */
/*  See the License for the specific language governing permissions and      */
/*  limitations under the License.                                           */
/*                                                                           */
/*  You should have received a copy of the Apache-2.0 license                */
/*  along with SCIP; see the file LICENSE. If not visit scipopt.org.         */
/*                                                                           */
/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
/**@file   lpi_qso.c
 * @ingroup LPIS
 * @brief  LP interface for QSopt version >= 070303
 * @author Daniel Espinoza
 * @author Marc Pfetsch
 */
 
/*--+----1----+----2----+----3----+----4----+----5----+----6----+----7----+----8----+----9----+----0----+----1----+----2*/
 
#include "qsopt.h"
#include "scip/bitencode.h"
#include "lpi/lpi.h"
#include "scip/pub_message.h"
#include "scip/pub_misc.h"
#include <string.h>
 
typedef SCIP_DUALPACKET COLPACKET;           /* each column needs two bits of information (basic/on_lower/on_upper) */
#define COLS_PER_PACKET SCIP_DUALPACKETSIZE
typedef SCIP_DUALPACKET ROWPACKET;           /* each row needs two bit of information (basic/on_lower/on_upper) */
#define ROWS_PER_PACKET SCIP_DUALPACKETSIZE
 
enum LPI_QSOPT_Algo
{
   LPI_QSOPT_ALGO_UNKNOWN = 0,               /**< unknown */
   LPI_QSOPT_ALGO_PRIMAL  = 1,               /**< primal simplex */
   LPI_QSOPT_ALGO_DUAL    = 2                /**< dual simplex */
};
typedef enum LPI_QSOPT_Algo LPI_QSOPT_ALGO;
 
 
/** LP interface */
struct SCIP_LPi
{
   QSprob                prob;               /**< LP struct pointer */
   int                   solstat;            /**< solution status of last optimization call */
   LPI_QSOPT_ALGO        algo;               /**< previously used algorithm */
   int                   previt;             /**< previous number of simplex iterations performed */
   int                   rowspace;           /**< current size of internal row-related arrays */
   char*                 isen;               /**< array of length rowspace */
   double*               irhs;               /**< array of rhs rowspace */
   double*               irng;               /**< array of range rowspace */
   int*                  ircnt;              /**< array of count rowspace */
   int*                  irbeg;              /**< array of beginning index rowspace */
   int                   colspace;           /**< current size of internal column-related arrays */
   int*                  iccnt;              /**< array of length colspace */
   char*                 iccha;              /**< array of type colspace */
   int                   tbsz;               /**< current size of tableau-related arrays */
   double*               itab;               /**< array of length tbsz */
   char*                 ibas;               /**< array of length tbsz */
   int                   pricing;            /**< SCIP pricing option */
   SCIP_MESSAGEHDLR*     messagehdlr;        /**< messagehdlr handler to printing messages, or NULL */
};
 
/** row norms */
struct SCIP_LPiNorms
{
   int                   nrows;              /**< number of rows */
   int                   ncols;              /**< number of columns */
   char*                 cstat;              /**< basis status of columns */
   char*                 rstat;              /**< basis status of rows */
   SCIP_Real*            norms;              /**< row norms */
};
 
 
/** solver name */
static char __qsstr[SCIP_MAXSTRLEN];
 
 
 
/*
 * local defines
 */
 
/** (feasibility) tolerance for qsopt */
#define FEASTOL 1e-6
 
/** tolerance for testing equality */
#define EPSILON 1e-9
 
/** print location of the calling line */
#define __QS_PRINTLOC__ fprintf(stderr,", in (%s:%d)\n", __FILE__, __LINE__)
 
/** This macro is to print error messages and jump to the given point in the code, it also prints the
 *  file name and line where this happened. */
#define QS_TESTG(A,B,C) do{{                    \
         if (A){                                \
            fprintf(stderr, C);                 \
            __QS_PRINTLOC__;                    \
            goto B;}}}while(0)
 
/** This macro is to print error messages and to exit with SCIP_LPERROR. */
#define QS_ERROR(A,...) do{{                    \
         if (A){                                \
            fprintf(stderr,__VA_ARGS__);        \
            __QS_PRINTLOC__;                    \
            return SCIP_LPERROR;}}}while(0)
 
/** Return value macro, if the value is non-zero, write to standard error the returning code and
 *  where this happened, and return SCIP_ERROR, otherwise return normal SCIP_OKAY termination code. */
#define QS_RETURN(A) do{                                                \
      const int __RVAL__ = (A);                                         \
      if (__RVAL__){                                                    \
         fprintf(stderr,"LP Error: QSopt returned %d",__RVAL__);        \
         __QS_PRINTLOC__;                                               \
         return SCIP_ERROR;}                                            \
      return SCIP_OKAY;}while(0)
 
/** Return value macro, if the value is non-zero, write to standard error the returning code and
 *  where this happened, and return SCIP_ERROR, otherwise do nothing. */
#define QS_CONDRET(A) do{                                               \
      const int __RVAL__ = (A);                                         \
      if (__RVAL__){                                                    \
         fprintf(stderr,"LP Error: QSopt returned %d",__RVAL__);        \
         __QS_PRINTLOC__;                                               \
         return SCIP_LPERROR;}                                          \
   }while(0)
 
 
 
/*
 * LPi state methods
 */
 
 
/** LPi state stores basis information */
struct SCIP_LPiState
{
   int                   ncols;              /**< number of LP columns */
   int                   nrows;              /**< number of LP rows */
   COLPACKET*            packcstat;          /**< column basis status in compressed form */
   ROWPACKET*            packrstat;          /**< row basis status in compressed form */
};
 
/** returns the number of packets needed to store column packet information */
static
int colpacketNum(
   int                   ncols               /**< number of columns to store */
   )
{
   return (ncols + (int)COLS_PER_PACKET-1)/(int)COLS_PER_PACKET;
}
 
/** returns the number of packets needed to store row packet information */
static
int rowpacketNum(
   int                   nrows               /**< number of rows to store */
   )
{
   return (nrows + (int)ROWS_PER_PACKET-1)/(int)ROWS_PER_PACKET;
}
 
/** store row and column basis status in a packed LPi state object */
static
void lpistatePack(
   SCIP_LPISTATE*        lpistate,           /**< pointer to LPi state data */
   const int*            cstat,              /**< basis status of columns in unpacked format */
   const int*            rstat               /**< basis status of rows in unpacked format */
   )
{
   assert(lpistate != NULL);
   assert(lpistate->packcstat != NULL);
   assert(lpistate->packrstat != NULL);
 
   SCIPencodeDualBit(cstat, lpistate->packcstat, lpistate->ncols);
   SCIPencodeDualBit(rstat, lpistate->packrstat, lpistate->nrows);
}
 
/** unpacks row and column basis status from a packed LPi state object */
static
void lpistateUnpack(
   const SCIP_LPISTATE*  lpistate,           /**< pointer to LPi state data */
   int*                  cstat,              /**< buffer for storing basis status of columns in unpacked format */
   int*                  rstat               /**< buffer for storing basis status of rows in unpacked format */
   )
{
   assert(lpistate != NULL);
   assert(lpistate->packcstat != NULL);
   assert(lpistate->packrstat != NULL);
 
   SCIPdecodeDualBit(lpistate->packcstat, cstat, lpistate->ncols);
   SCIPdecodeDualBit(lpistate->packrstat, rstat, lpistate->nrows);
}
 
/** creates LPi state information object */
static
SCIP_RETCODE lpistateCreate(
   SCIP_LPISTATE**       lpistate,           /**< pointer to LPi state */
   BMS_BLKMEM*           blkmem,             /**< block memory */
   int                   ncols,              /**< number of columns to store */
   int                   nrows               /**< number of rows to store */
   )
{
   assert(lpistate != NULL);
   assert(blkmem != NULL);
   assert(ncols >= 0);
   assert(nrows >= 0);
 
   SCIP_ALLOC( BMSallocBlockMemory(blkmem, lpistate) );
   SCIP_ALLOC( BMSallocBlockMemoryArray(blkmem, &(*lpistate)->packcstat, colpacketNum(ncols)) );
   SCIP_ALLOC( BMSallocBlockMemoryArray(blkmem, &(*lpistate)->packrstat, rowpacketNum(nrows)) );
 
   return SCIP_OKAY;
}
 
/** frees LPi state information */
static
void lpistateFree(
   SCIP_LPISTATE**       lpistate,           /**< pointer to LPi state information (like basis information) */
   BMS_BLKMEM*           blkmem              /**< block memory */
   )
{
   assert(blkmem != NULL);
   assert(lpistate != NULL);
   assert(*lpistate != NULL);
 
   BMSfreeBlockMemoryArray(blkmem, &(*lpistate)->packcstat, colpacketNum((*lpistate)->ncols));
   BMSfreeBlockMemoryArray(blkmem, &(*lpistate)->packrstat, rowpacketNum((*lpistate)->nrows));
   BMSfreeBlockMemory(blkmem, lpistate);
}
 
 
 
/*
 * local functions
 */
 
/** ensure size of column-related arrays */
static
SCIP_RETCODE ensureTabMem(
   SCIP_LPI* const       lpi,                /**< pointer to an LP interface structure */
   int                   sz                  /**< size */
   )
{
   assert(lpi != NULL);
   if( lpi->tbsz < sz )
   {
      lpi->tbsz = sz*2;
      SCIP_ALLOC( BMSreallocMemoryArray(&(lpi->itab), lpi->tbsz) );
      SCIP_ALLOC( BMSreallocMemoryArray(&(lpi->ibas), lpi->tbsz) );
   }
   return SCIP_OKAY;
}
 
/** ensure size of column-related arrays */
static
SCIP_RETCODE ensureColMem(
   SCIP_LPI* const       lpi,                /**< pointer to an LP interface structure */
   int                   ncols               /**< number of columns */
   )
{
   assert(lpi != NULL);
   if( lpi->colspace < ncols )
   {
      lpi->colspace = ncols*2;
      SCIP_ALLOC( BMSreallocMemoryArray(&(lpi->iccnt), lpi->colspace) );
      SCIP_ALLOC( BMSreallocMemoryArray(&(lpi->iccha), lpi->colspace) );
   }
   return SCIP_OKAY;
}
 
/** ensure size of row-related arrays */
static
SCIP_RETCODE ensureRowMem(
   SCIP_LPI* const       lpi,                /**< pointer to an LP interface structure */
   int                   nrows               /**< number of rows */
   )
{
   assert(lpi != NULL);
   if( lpi->rowspace < nrows )
   {
      lpi->rowspace = nrows*2;
      SCIP_ALLOC( BMSreallocMemoryArray(&(lpi->isen), lpi->rowspace) );
      SCIP_ALLOC( BMSreallocMemoryArray(&(lpi->irhs), lpi->rowspace) );
      SCIP_ALLOC( BMSreallocMemoryArray(&(lpi->irng), lpi->rowspace) );
      SCIP_ALLOC( BMSreallocMemoryArray(&(lpi->ircnt), lpi->rowspace) );
      SCIP_ALLOC( BMSreallocMemoryArray(&(lpi->irbeg), lpi->rowspace) );
   }
   return SCIP_OKAY;
}
 
/** transform lhs/rhs into qsopt format */
static
SCIP_RETCODE convertSides(
   SCIP_LPI* const       lpi,                /**< pointer to an LP interface structure */
   int                   nrows,              /**< number of rows */
   const double* const   lhs,                /**< left hand side */
   const double* const   rhs                 /**< right hand side */
   )
{
   int state;
   register int i;
 
   assert(lpi != NULL);
   assert(lhs != NULL);
   assert(rhs!= NULL);
 
   for( i = 0 ; i < nrows ; ++i )
   {
      state = ((lhs[i] <= -QS_MAXDOUBLE ? 1 : 0) | (rhs[i] >= QS_MAXDOUBLE ? 2 : 0));
      lpi->ircnt[i] = 0;
      lpi->irbeg[i] = 0;
      switch( state )
      {
      case 0:
        /* check for equations */
         if( EPSEQ(lhs[i], rhs[i], EPSILON) )
         {
            lpi->isen[i] = 'E';
            lpi->irhs[i] = lhs[i];
            lpi->irng[i] = 0.0;
         }
         else
         {
            lpi->isen[i] = 'R';
            lpi->irhs[i] = lhs[i];
            lpi->irng[i] = rhs[i] - lhs[i];
            assert(lpi->irng[i] >= 0.0);
         }
         break;
      case 1:
         lpi->isen[i] = 'L';
         lpi->irhs[i] = rhs[i];
         lpi->irng[i] = 0;
         break;
      case 2:
         lpi->isen[i] = 'G';
         lpi->irhs[i] = lhs[i];
         lpi->irng[i] = 0;
         break;
      default:
         SCIPerrorMessage("Error, constraint %d has no bounds!", i);
         SCIPABORT();
         return SCIP_INVALIDDATA; /*lint !e527*/
      }
   }
   return SCIP_OKAY;
}
 
 
 
 
/*
 * Miscellaneous Methods
 */
 
 
/**@name Miscellaneous Methods */
/**@{ */
 
 
/** gets name and version of LP solver */
const char* SCIPlpiGetSolverName(void)
{
   char* vname;
   size_t vnamelen;
 
   /* need to copy string to __qsstr, since vname will be freed */
   vname = QSversion();
   vnamelen = strlen(vname);
   if ( vnamelen >= SCIP_MAXSTRLEN-1 )
      vnamelen = SCIP_MAXSTRLEN - 2;
   memcpy(__qsstr, vname, vnamelen);
   __qsstr[vnamelen+1] = '\0';
   QSfree(vname);
   return __qsstr;
}
 
/** gets description of LP solver (developer, webpage, ...) */
const char* SCIPlpiGetSolverDesc(
   void
   )
{
   return "Linear Programming Solver developed by D. Applegate, W. Cook, S. Dash, and M. Mevenkamp (www.isye.gatech.edu/~wcook/qsopt)";
}
 
/** gets pointer for LP solver - use only with great care */
void* SCIPlpiGetSolverPointer(
   SCIP_LPI*             lpi                 /**< pointer to an LP interface structure */
   )
{
   assert(lpi != NULL);
   return (void*) lpi->prob;
}
 
/** pass integrality information to LP solver */
SCIP_RETCODE SCIPlpiSetIntegralityInformation(
   SCIP_LPI*             lpi,                /**< pointer to an LP interface structure */
   int                   ncols,              /**< length of integrality array */
   int*                  intInfo             /**< integrality array (0: continuous, 1: integer). May be NULL iff ncols is 0.  */
   )
{  /*lint --e{715}*/
   assert( lpi != NULL );
   assert( ncols >= 0 );
   assert( ncols == 0 || intInfo != NULL );
 
   SCIPerrorMessage("SCIPlpiSetIntegralityInformation() has not been implemented yet.\n");
   return SCIP_LPERROR;
}
 
/** informs about availability of a primal simplex solving method */
SCIP_Bool SCIPlpiHasPrimalSolve(
   void
   )
{
   return TRUE;
}
 
/** informs about availability of a dual simplex solving method */
SCIP_Bool SCIPlpiHasDualSolve(
   void
   )
{
   return TRUE;
}
 
/** informs about availability of a barrier solving method */
SCIP_Bool SCIPlpiHasBarrierSolve(
   void
   )
{
   return FALSE;
}
 
/**@} */
 
 
 
 
/*
 * LPI Creation and Destruction Methods
 */
 
/**@name LPI Creation and Destruction Methods */
/**@{ */
 
/** creates an LP problem object */
SCIP_RETCODE SCIPlpiCreate(
   SCIP_LPI**            lpi,                /**< pointer to an LP interface structure */
   SCIP_MESSAGEHDLR*     messagehdlr,        /**< message handler to use for printing messages, or NULL */
   const char*           name,               /**< problem name */
   SCIP_OBJSEN           objsen              /**< objective sense */
   )
{
   /* QSopt only works with doubles as floating points and bool as integers */
   assert(sizeof(SCIP_Real) == sizeof(double)); /*lint !e506*/
   assert(sizeof(SCIP_Bool) == sizeof(int)); /*lint !e506*/
   assert(name != NULL);
   assert(lpi != NULL);
 
   SCIPdebugMessage("SCIPlpiCreate()\n");
 
   /* create LP */
   SCIP_ALLOC( BMSallocMemory(lpi) );
   memset(*lpi, 0, sizeof(struct SCIP_LPi));
 
   (*lpi)->prob = QScreate_prob(name, (int) objsen);
   if ( (*lpi)->prob == NULL )
   {
      SCIPerrorMessage("No memory\n");
      return SCIP_LPERROR;
   }
 
   (*lpi)->rowspace = 1024;
   SCIP_ALLOC( BMSallocMemoryArray(&((*lpi)->isen),1024) );
   SCIP_ALLOC( BMSallocMemoryArray(&((*lpi)->irhs),1024) );
   SCIP_ALLOC( BMSallocMemoryArray(&((*lpi)->irng),1024) );
   SCIP_ALLOC( BMSallocMemoryArray(&((*lpi)->irbeg),1024) );
   SCIP_ALLOC( BMSallocMemoryArray(&((*lpi)->ircnt),1024) );
 
   (*lpi)->colspace = 1024;
   SCIP_ALLOC( BMSallocMemoryArray(&((*lpi)->iccnt), 1024) );
   SCIP_ALLOC( BMSallocMemoryArray(&((*lpi)->iccha), 1024) );
 
   (*lpi)->tbsz = 1024;
   SCIP_ALLOC( BMSallocMemoryArray(&((*lpi)->itab), 1024) );
   SCIP_ALLOC( BMSallocMemoryArray(&((*lpi)->ibas), 1024) );
 
   (*lpi)->messagehdlr = messagehdlr;
   (*lpi)->algo = LPI_QSOPT_ALGO_UNKNOWN;
 
   return SCIP_OKAY;
}
 
/** deletes an LP problem object */
SCIP_RETCODE SCIPlpiFree(
   SCIP_LPI**            lpi                 /**< pointer to an LP interface structure */
   )
{
   assert(lpi != NULL);
   assert(*lpi != NULL);
 
   SCIPdebugMessage("SCIPlpiFree()\n");
 
   /* free LP */
   QSfree_prob((*lpi)->prob);
   BMSfreeMemoryArray( &((*lpi)->isen) );
   BMSfreeMemoryArray( &((*lpi)->irhs) );
   BMSfreeMemoryArray( &((*lpi)->irng) );
   BMSfreeMemoryArray( &((*lpi)->ircnt) );
   BMSfreeMemoryArray( &((*lpi)->irbeg) );
   BMSfreeMemoryArray( &((*lpi)->iccnt) );
   BMSfreeMemoryArray( &((*lpi)->iccha) );
   BMSfreeMemoryArray( &((*lpi)->itab) );
   BMSfreeMemoryArray( &((*lpi)->ibas) );
 
   /* free memory */
   BMSfreeMemory(lpi);
 
   return SCIP_OKAY;
}
/**@} */
 
 
 
 
/*
 * Modification Methods
 */
 
/**@name Modification Methods */
/**@{ */
 
 
/** copies LP data with column matrix into LP solver */
SCIP_RETCODE SCIPlpiLoadColLP(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_OBJSEN           objsen,             /**< objective sense */
   int                   ncols,              /**< number of columns */
   const SCIP_Real*      obj,                /**< objective function values of columns */
   const SCIP_Real*      lb,                 /**< lower bounds of columns */
   const SCIP_Real*      ub,                 /**< upper bounds of columns */
   char**                colnames,           /**< column names, or NULL */
   int                   nrows,              /**< number of rows */
   const SCIP_Real*      lhs,                /**< left hand sides of rows */
   const SCIP_Real*      rhs,                /**< right hand sides of rows */
   char**                rownames,           /**< row names, or NULL */
   int                   nnonz,              /**< number of nonzero elements in the constraint matrix */
   const int*            beg,                /**< start index of each column in ind- and val-array */
   const int*            ind,                /**< row indices of constraint matrix entries */
   const SCIP_Real*      val                 /**< values of constraint matrix entries */
   )
{
   register int i;
 
#ifndef NDEBUG
   {
      int j;
      for( j = 0; j < nnonz; j++ )
         assert( val[j] != 0 );
   }
#endif
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(lhs != NULL);
   assert(rhs != NULL);
   assert(obj != NULL);
   assert(lb != NULL);
   assert(ub != NULL);
   assert(beg != NULL);
   assert(ind != NULL);
   assert(val != NULL);
 
   lpi->solstat = 0;
 
   SCIPdebugMessage("loading LP in column format into QSopt: %d cols, %d rows\n", ncols, nrows);
 
   /* delete old LP */
   SCIP_CALL( SCIPlpiClear(lpi) );
 
   /* set sense */
   if( objsen == SCIP_OBJSEN_MAXIMIZE )
   {
      QS_CONDRET( QSchange_objsense(lpi->prob, QS_MAX) );
   }
   else
   {
      QS_CONDRET( QSchange_objsense(lpi->prob, QS_MIN) );
   }
 
   /* add rows with no matrix, and then the columns, first ensure space */
   SCIP_CALL( ensureRowMem(lpi, nrows) );
 
   /* convert lhs/rhs into sen/rhs/range tuples */
   SCIP_CALL( convertSides(lpi, nrows, lhs, rhs) );
 
   /* now we add the rows */
   QS_CONDRET( QSadd_ranged_rows(lpi->prob, nrows, lpi->ircnt, lpi->irbeg, 0, 0, lpi->irhs, lpi->isen, lpi->irng, (const char**)rownames) );
 
   /* ensure column size */
   SCIP_CALL( ensureColMem(lpi, ncols) );
 
   /* compute column lengths */
   for( i = 0; i < ncols-1; ++i )
   {
      lpi->iccnt[i] = beg[i+1] - beg[i];
      assert(lpi->iccnt[i] >= 0);
   }
 
   if( ncols > 0 )
   {
      lpi->iccnt[ncols-1] = nnonz - beg[ncols-1];
      assert(lpi->iccnt[ncols-1] >= 0);
   }
 
   /* and add the columns */
   QS_CONDRET( QSadd_cols(lpi->prob, ncols, lpi->iccnt, (int*) beg, (int*) ind, (SCIP_Real*) val, (SCIP_Real*) obj,
         (SCIP_Real*) lb, (SCIP_Real*) ub, (const char**)colnames) );
 
   return SCIP_OKAY;
}
 
 
/** adds columns to the LP */
SCIP_RETCODE SCIPlpiAddCols(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   ncols,              /**< number of columns to be added */
   const SCIP_Real*      obj,                /**< objective function values of new columns */
   const SCIP_Real*      lb,                 /**< lower bounds of new columns */
   const SCIP_Real*      ub,                 /**< upper bounds of new columns */
   char**                colnames,           /**< column names, or NULL */
   int                   nnonz,              /**< number of nonzero elements to be added to the constraint matrix */
   const int*            beg,                /**< start index of each column in ind- and val-array, or NULL if nnonz == 0 */
   const int*            ind,                /**< row indices of constraint matrix entries, or NULL if nnonz == 0 */
   const SCIP_Real*      val                 /**< values of constraint matrix entries, or NULL if nnonz == 0 */
   )
{
   register int i;
   int* lbeg;
 
   assert( lpi != NULL );
   assert( lpi->prob != NULL );
   assert(obj != NULL);
   assert(nnonz == 0 || beg != NULL);
   assert(nnonz == 0 || ind != NULL);
   assert(nnonz == 0 || val != NULL);
   assert(nnonz >= 0);
   assert(ncols >= 0);
 
   SCIPdebugMessage("adding %d columns with %d nonzeros to QSopt\n", ncols, nnonz);
 
   if ( ncols <= 0 )
      return SCIP_OKAY;
   assert( lb != NULL && ub != NULL );
 
   lpi->solstat = 0;
 
   /* ensure column size */
   SCIP_CALL( ensureColMem(lpi, ncols) );
 
   /* if there are no nonzeros, we have to set up an artificial beg array */
   if ( nnonz == 0 )
   {
      SCIP_ALLOC( BMSallocMemoryArray(&lbeg, ncols) );
 
      /* compute column lengths */
      for( i = 0; i < ncols; ++i )
      {
         lpi->iccnt[i] = 0;
         lbeg[i] = 0;
      }
   }
   else
   {
#ifndef NDEBUG
      /* perform check that no new rows are added - this is forbidden */
      int nrows;
 
      nrows = QSget_rowcount(lpi->prob);
      for (i = 0; i < nnonz; ++i)
      {
         assert( 0 <= ind[i] && ind[i] < nrows );
         assert( val[i] != 0.0 );
      }
#endif
 
      /* compute column lengths */
      for( i = 0; i < ncols - 1; ++i )
      {
         lpi->iccnt[i] = beg[i+1] - beg[i];
         assert(lpi->iccnt[i] >= 0);
      }
 
      lpi->iccnt[ncols-1] = nnonz - beg[ncols-1];
      assert(lpi->iccnt[ncols-1] >= 0);
      lbeg = (int*) beg;
   }
 
   /* add the columns */
   QS_CONDRET( QSadd_cols(lpi->prob, ncols, lpi->iccnt, (int*) lbeg, (int*) ind, (SCIP_Real*) val, (SCIP_Real*) obj,
         (SCIP_Real*) lb, (SCIP_Real*) ub, (const char**)colnames) );
 
   /* possibly free space */
   if ( nnonz == 0 )
   {
      BMSfreeMemoryArray(&lbeg);
   }
 
   return SCIP_OKAY;
}
 
/** deletes all columns in the given range from LP */
SCIP_RETCODE SCIPlpiDelCols(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   firstcol,           /**< first column to be deleted */
   int                   lastcol             /**< last column to be deleted */
   )
{
   const int len = lastcol - firstcol + 1;
   register int i;
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(firstcol >= 0);
   assert(lastcol < QSget_colcount(lpi->prob));
   assert(len >= 0);
 
   SCIPdebugMessage("deleting %d columns from QSopt\n", len);
 
   /* handle empty range */
   if( len <= 0 )
      return SCIP_OKAY;
 
   lpi->solstat = 0;
 
   SCIP_CALL( ensureColMem(lpi, len) );
   for( i = firstcol ; i <= lastcol ; i++ )
      lpi->iccnt[i-firstcol] = i;
 
   QS_CONDRET( QSdelete_cols(lpi->prob, len, lpi->iccnt) );
 
   return SCIP_OKAY;
}
 
/** deletes columns from SCIP_LP; the new position of a column must not be greater that its old position */
SCIP_RETCODE SCIPlpiDelColset(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int*                  dstat               /**< deletion status of columns
                                              *   input:  1 if column should be deleted, 0 if not
                                              *   output: new position of column, -1 if column was deleted */
   )
{
   int ncols;
   int ccnt;
   register int i;
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(dstat != NULL);
 
   ncols = QSget_colcount(lpi->prob);
   lpi->solstat = 0;
 
   SCIPdebugMessage("deleting a column set from QSopt\n");
 
   QS_CONDRET( QSdelete_setcols(lpi->prob,dstat) );
 
   for( i=0, ccnt=0; i < ncols; i++ )
   {
      if( dstat[i] )
         dstat[i] = -1;
      else
         dstat[i] = ccnt++;
   }
 
   return SCIP_OKAY;
}
 
 
/** adds rows to the LP */
SCIP_RETCODE SCIPlpiAddRows(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   nrows,              /**< number of rows to be added */
   const SCIP_Real*      lhs,                /**< left hand sides of new rows */
   const SCIP_Real*      rhs,                /**< right hand sides of new rows */
   char**                rownames,           /**< row names, or NULL */
   int                   nnonz,              /**< number of nonzero elements to be added to the constraint matrix */
   const int*            beg,                /**< start index of each row in ind- and val-array, or NULL if nnonz == 0 */
   const int*            ind,                /**< column indices of constraint matrix entries, or NULL if nnonz == 0 */
   const SCIP_Real*      val                 /**< values of constraint matrix entries, or NULL if nnonz == 0 */
   )
{
   register int i;
 
   assert( lpi != NULL );
   assert( lpi->prob != NULL );
   assert( nrows >= 0 );
   assert(lhs != NULL);
   assert(rhs != NULL);
 
   lpi->solstat = 0;
 
   SCIPdebugMessage("adding %d rows with %d nonzeros to QSopt\n", nrows, nnonz);
 
   if ( nrows <= 0 )
      return SCIP_OKAY;
 
   /* add rows with no matrix, and then the columns, first ensure space */
   SCIP_CALL( ensureRowMem(lpi, nrows) );
 
   /* convert lhs/rhs into sen/rhs/range tuples */
   SCIP_CALL( convertSides(lpi, nrows, lhs, rhs) );
 
   /* compute row count */
   if( nnonz > 0 )
   {
      assert(beg != NULL);
      assert(ind != NULL);
      assert(val != NULL);
 
#ifndef NDEBUG
      {
         /* perform check that no new cols are added - this is forbidden */
         int ncols;
 
         ncols = QSget_colcount(lpi->prob);
         for (i = 0; i < nnonz; ++i)
         {
            assert( val[i] != 0.0 );
            assert( 0 <= ind[i] && ind[i] < ncols );
         }
      }
#endif
 
      for( i = 0 ; i < nrows -1 ; i++ )
      {
         lpi->ircnt[i] = beg[i+1] - beg[i];
         assert(lpi->ircnt[i] >= 0);
      }
      assert( nrows > 0 );
      lpi->ircnt[nrows-1] = nnonz - beg[nrows-1];
      assert(lpi->ircnt[nrows-1] >= 0);
 
      /* now we add the rows */
      QS_CONDRET( QSadd_ranged_rows(lpi->prob, nrows, lpi->ircnt, (int*) beg, (int*) ind, (SCIP_Real*) val, lpi->irhs,
            lpi->isen, lpi->irng, (const char**)rownames) );
   }
   else
   {
      for( i = 0; i < nrows -1; ++i )
      {
         lpi->ircnt[i] = 0;
         lpi->irbeg[i] = 0;
      }
 
      /* now we add the rows */
      QS_CONDRET( QSadd_ranged_rows(lpi->prob, nrows, lpi->ircnt, lpi->irbeg, (int*) ind, (SCIP_Real*) val, lpi->irhs,
            lpi->isen, lpi->irng, (const char**)rownames) );
   }
 
   return SCIP_OKAY;
}
 
/** gets column names */
SCIP_RETCODE SCIPlpiGetColNames(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   firstcol,           /**< first column to get name from LP */
   int                   lastcol,            /**< last column to get name from LP */
   char**                colnames,           /**< pointers to column names (of size at least lastcol-firstcol+1) or NULL if namestoragesize is zero */
   char*                 namestorage,        /**< storage for col names or NULL if namestoragesize is zero */
   int                   namestoragesize,    /**< size of namestorage (if 0, storageleft returns the storage needed) */
   int*                  storageleft         /**< amount of storage left (if < 0 the namestorage was not big enough) or NULL if namestoragesize is zero */
   )
{
   char** cnames;
   char* s;
   int ncols;
   int rval;
   int j;
   int sizeleft;
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(colnames != NULL || namestoragesize == 0);
   assert(namestorage != NULL || namestoragesize == 0);
   assert(namestoragesize >= 0);
   assert(storageleft != NULL);
   assert(firstcol >= 0);
   assert(lastcol < QSget_colcount(lpi->prob));
   assert(firstcol <= lastcol + 1);
 
   SCIPdebugMessage("getting column names %d to %d\n", firstcol, lastcol);
 
   ncols = QSget_colcount(lpi->prob);
   SCIP_ALLOC( BMSallocMemoryArray(&cnames, ncols) );
 
   rval = QSget_colnames(lpi->prob, cnames);
   QS_ERROR(rval, "failed getting column names");
 
   /* copy column names */
   s = namestorage;
   sizeleft = namestoragesize;
   for( j = firstcol; j <= lastcol; ++j )
   {
      const char* t;
 
      assert( s != NULL );
 
      t = cnames[j];
      if( colnames != NULL )
         colnames[j-firstcol] = s;
      while( *t != '\0' )
      {
         if( sizeleft > 0 )
            *(s++) = *(t++);
         --sizeleft;
      }
      *(s++) = '\0';
   }
   *storageleft = sizeleft;
 
   /* free space */
   for( j = 0; j < ncols; ++j )
      free(cnames[j]);
 
   return SCIP_OKAY;
}
 
/** gets row names */
SCIP_RETCODE SCIPlpiGetRowNames(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   firstrow,           /**< first row to get name from LP */
   int                   lastrow,            /**< last row to get name from LP */
   char**                rownames,           /**< pointers to row names (of size at least lastrow-firstrow+1) or NULL if namestoragesize is zero */
   char*                 namestorage,        /**< storage for row names or NULL if namestoragesize is zero */
   int                   namestoragesize,    /**< size of namestorage (if 0, -storageleft returns the storage needed) */
   int*                  storageleft         /**< amount of storage left (if < 0 the namestorage was not big enough) or NULL if namestoragesize is zero */
   )
{
   char** rnames;
   char* s;
   int nrows;
   int rval;
   int i;
   int sizeleft;
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(rownames != NULL || namestoragesize == 0);
   assert(namestorage != NULL || namestoragesize == 0);
   assert(namestoragesize >= 0);
   assert(storageleft != NULL);
   assert(firstrow >= 0);
   assert(lastrow < QSget_rowcount(lpi->prob));
   assert(firstrow <= lastrow + 1);
 
   SCIPdebugMessage("getting row names %d to %d\n", firstrow, lastrow);
 
   nrows = QSget_rowcount(lpi->prob);
   SCIP_ALLOC( BMSallocMemoryArray(&rnames, nrows) );
 
   rval = QSget_rownames(lpi->prob, rnames);
   QS_ERROR(rval, "failed getting row names");
 
   s = namestorage;
   sizeleft = namestoragesize;
   for( i = firstrow; i <= lastrow; ++i )
   {
      const char* t;
 
      assert( s != NULL );
 
      t = rnames[i];
      if( rownames != NULL )
         rownames[i-firstrow] = s;
      while( *t != '\0' )
      {
         if( sizeleft > 0 )
            *(s++) = *(t++);
         --sizeleft;
      }
      *(s++) = '\0';
   }
   *storageleft = sizeleft;
 
   /* free space */
   for( i = 0; i < nrows; ++i )
      free(rnames[i]);
 
   return SCIP_OKAY;
}
 
/** deletes all rows in the given range from LP */
SCIP_RETCODE SCIPlpiDelRows(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   firstrow,           /**< first row to be deleted */
   int                   lastrow             /**< last row to be deleted */
   )
{
   const int len = lastrow - firstrow + 1;
   register int i;
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(firstrow >= 0);
   assert(lastrow < QSget_rowcount(lpi->prob));
   assert(len >= 0);
 
   SCIPdebugMessage("deleting %d rows from QSopt\n", len);
 
   /* handle empty range */
   if( len <= 0 )
      return SCIP_OKAY;
 
   lpi->solstat = 0;
 
   SCIP_CALL( ensureRowMem(lpi, len) );
   for( i = firstrow; i <= lastrow; i++ )
      lpi->ircnt[i-firstrow] = i;
   QS_CONDRET( QSdelete_rows(lpi->prob, len, lpi->ircnt) );
 
   return SCIP_OKAY;
}
 
 
/** deletes rows from SCIP_LP; the new position of a row must not be greater that its old position */
SCIP_RETCODE SCIPlpiDelRowset(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int*                  dstat               /**< deletion status of rows
                                              *   input:  1 if row should be deleted, 0 if not
                                              *   output: new position of row, -1 if row was deleted */
   )
{
   int nrows;
   int ccnt;
   int ndel = 0;
   register int i;
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
 
   nrows = QSget_rowcount(lpi->prob);
   lpi->solstat = 0;
 
   for( i = 0; i < nrows; ++i )
   {
      if( dstat[i] == 1 )
         ndel++;
   }
 
   SCIPdebugMessage("deleting a row set from QSopt (%d)\n", ndel);
 
   QS_CONDRET( QSdelete_setrows(lpi->prob,dstat) );
 
   for( i=0, ccnt=0; i < nrows; i++ )
   {
      if( dstat[i] )
         dstat[i] = -1;
      else
         dstat[i] = ccnt++;
   }
 
   return SCIP_OKAY;
}
 
/** clears the whole LP */
SCIP_RETCODE SCIPlpiClear(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{
   char savename[1024];
   char* name;
   int objsen;
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
 
   SCIPdebugMessage("clearing QSopt LP\n");
   lpi->solstat = 0;
 
   /* save sense and name of problem */
   QS_CONDRET( QSget_objsense(lpi->prob, &objsen) );
 
   name = QSget_probname(lpi->prob);
   (void)strncpy(savename, name, 1023);
   name[1023] = '\0';
 
   QSfree_prob(lpi->prob);
   lpi->prob = QScreate_prob(savename, objsen);
 
   return SCIP_OKAY;
}
 
 
/** changes lower and upper bounds of columns */
SCIP_RETCODE SCIPlpiChgBounds(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   ncols,              /**< number of columns to change bounds for */
   const int*            ind,                /**< column indices or NULL if ncols is zero */
   const SCIP_Real*      lb,                 /**< values for the new lower bounds or NULL if ncols is zero */
   const SCIP_Real*      ub                  /**< values for the new upper bounds or NULL if ncols is zero */
   )
{
   register int i;
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(ncols == 0 || (ind != NULL && lb != NULL && ub != NULL));
   if( ncols <= 0 )
      return SCIP_OKAY;
 
   lpi->solstat = 0;
 
   SCIPdebugMessage("changing %d bounds in QSopt\n", ncols);
 
   for (i = 0; i < ncols; ++i)
   {
      SCIPdebugPrintf("  col %d: [%g,%g]\n", ind[i], lb[i], ub[i]);
 
      if ( SCIPlpiIsInfinity(lpi, lb[i]) )
      {
         SCIPerrorMessage("LP Error: fixing lower bound for variable %d to infinity.\n", ind[i]);
         return SCIP_LPERROR;
      }
      if ( SCIPlpiIsInfinity(lpi, -ub[i]) )
      {
         SCIPerrorMessage("LP Error: fixing upper bound for variable %d to -infinity.\n", ind[i]);
         return SCIP_LPERROR;
      }
   }
 
   SCIP_CALL(ensureColMem(lpi, ncols));
   for( i = 0; i < ncols; ++i )
      lpi->iccha[i] = 'L';
 
   QS_CONDRET( QSchange_bounds(lpi->prob, ncols, (int*) ind, lpi->iccha, (SCIP_Real*) lb) );
 
   for( i = 0; i < ncols; ++i )
      lpi->iccha[i] = 'U';
 
   QS_CONDRET( QSchange_bounds(lpi->prob, ncols, (int*) ind, lpi->iccha, (SCIP_Real*) ub) );
 
   return SCIP_OKAY;
}
 
/** changes left and right hand sides of rows */
SCIP_RETCODE SCIPlpiChgSides(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   nrows,              /**< number of rows to change sides for */
   const int*            ind,                /**< row indices */
   const SCIP_Real*      lhs,                /**< new values for left hand sides */
   const SCIP_Real*      rhs                 /**< new values for right hand sides */
   )
{
   register int i;
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(ind != NULL);
   if( nrows <= 0 )
      return SCIP_OKAY;
 
   lpi->solstat = 0;
 
   SCIPdebugMessage("changing %d sides in QSopt\n", nrows);
 
   SCIP_CALL( ensureRowMem(lpi, nrows) );
 
   /* convert lhs/rhs into sen/rhs/range tuples */
   SCIP_CALL( convertSides(lpi, nrows, lhs, rhs) );
 
   /* now we change all rows */
   for( i = 0; i < nrows; ++i )
   {
      QS_CONDRET( QSchange_sense(lpi->prob, ind[i], lpi->isen[i]) );
 
      QS_CONDRET( QSchange_rhscoef(lpi->prob, ind[i], lpi->irhs[i]) );
 
      if( lpi->isen[i] == 'R' )
      {
         QS_CONDRET( QSchange_range(lpi->prob, ind[i], lpi->irng[i]) );
      }
   }
 
   return SCIP_OKAY;
}
 
/** changes a single coefficient */
SCIP_RETCODE SCIPlpiChgCoef(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   row,                /**< row number of coefficient to change */
   int                   col,                /**< column number of coefficient to change */
   SCIP_Real             newval              /**< new value of coefficient */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
 
   lpi->solstat = 0;
 
   SCIPdebugMessage("changing coefficient row %d, column %d in QSopt to %g\n", row, col, newval);
 
   QS_CONDRET( QSchange_coef(lpi->prob, row, col, newval) );
 
   return SCIP_OKAY;
}
 
/** changes the objective sense */
SCIP_RETCODE SCIPlpiChgObjsen(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_OBJSEN           objsen              /**< new objective sense */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
 
   lpi->solstat = 0;
   SCIPdebugMessage("changing objective sense in QSopt to %d\n", objsen);
 
   /* set sense */
   if( objsen == SCIP_OBJSEN_MAXIMIZE )
   {
      QS_CONDRET( QSchange_objsense(lpi->prob, QS_MAX) );
   }
   else
   {
      QS_CONDRET( QSchange_objsense(lpi->prob, QS_MIN) );
   }
 
   return SCIP_OKAY;
}
 
/** changes objective values of columns in the LP */
SCIP_RETCODE SCIPlpiChgObj(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   ncols,              /**< number of columns to change objective value for */
   const int*            ind,                /**< column indices to change objective value for */
   const SCIP_Real*      obj                 /**< new objective values for columns */
   )
{
   register int i;
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(ind != NULL);
   assert(obj != NULL);
 
   lpi->solstat = 0;
 
   SCIPdebugMessage("changing %d objective values in QSopt\n", ncols);
 
   for( i = 0; i < ncols; ++i )
   {
      QS_CONDRET( QSchange_objcoef(lpi->prob, ind[i], obj[i]) );
   }
 
   return SCIP_OKAY;
}
 
/** multiplies a row with a non-zero scalar; for negative scalars, the row's sense is switched accordingly */
SCIP_RETCODE SCIPlpiScaleRow(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   row,                /**< row number to scale */
   SCIP_Real             scaleval            /**< scaling multiplier */
   )
{
   register int i;
   int rowlist[1];
   int* rowcnt = NULL, *rowbeg = NULL, *rowind = NULL;
   double* rowval = NULL, *rhs = NULL, *range = NULL;
   char* sense = NULL;
   int rval;
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
 
   lpi->solstat = 0;
 
   SCIPdebugMessage("scaling row %d with factor %g in QSopt\n", row, scaleval);
 
   rowlist[0] = row;
   /* get row */
   rval = QSget_ranged_rows_list(lpi->prob, 1, rowlist, &rowcnt, &rowbeg, &rowind, &rowval, &rhs, &sense, &range, 0);
   QS_TESTG(rval, CLEANUP, " ");
 
   /* change all coefficients in the constraint */
   for( i = 0; i < rowcnt[0]; ++i )
   {
      rval = QSchange_coef(lpi->prob, row, rowind[i], rowval[i] * scaleval);
      QS_TESTG(rval, CLEANUP, " ");
   }
 
   /* if we have a positive scalar, we just scale rhs and range */
   if( scaleval >= 0 )
   {
      rval = QSchange_rhscoef(lpi->prob, row, rhs[0] * scaleval);
      QS_TESTG(rval, CLEANUP, " ");
      if( sense[0] == 'R' )
      {
         rval = QSchange_range(lpi->prob, row, range[0] * scaleval);
         QS_TESTG(rval, CLEANUP, " ");
      }
   }
   /* otherwise, we must change everything */
   else
   {
      switch( sense[0] )
      {
      case 'E':
         rval = QSchange_rhscoef(lpi->prob, row, rhs[0]*scaleval);
         QS_TESTG(rval, CLEANUP, " ");
         break;
      case 'L':
         rval = QSchange_rhscoef(lpi->prob, row, rhs[0]*scaleval);
         QS_TESTG(rval, CLEANUP, " ");
         rval = QSchange_sense(lpi->prob, row, 'G');
         QS_TESTG(rval, CLEANUP, " ");
         break;
      case 'G':
         rval = QSchange_rhscoef(lpi->prob, row, rhs[0]*scaleval);
         QS_TESTG(rval, CLEANUP, " ");
         rval = QSchange_sense(lpi->prob, row, 'L');
         QS_TESTG(rval, CLEANUP, " ");
         break;
      case 'R':
         rhs[0] = (rhs[0] + range[0]) * scaleval;
         range[0] = fabs(scaleval) * range[0];
         rval = QSchange_rhscoef(lpi->prob, row, rhs[0]);
         QS_TESTG(rval, CLEANUP, " ");
         rval = QSchange_range(lpi->prob, row, range[0]);
         QS_TESTG(rval, CLEANUP, " ");
         break;
      default:
         SCIPerrorMessage("Impossible! received sense %c (not E L G R)", sense[0]);
         rval = 1;
         goto CLEANUP;
      }
   }
 
   /* now we must free all received arrays */
   /* ending */
 CLEANUP:
   if( rowcnt != NULL )
      QSfree(rowcnt);
   if( rowbeg != NULL )
      QSfree(rowbeg);
   if( rowind != NULL )
      QSfree(rowind);
   if( rowval != NULL )
      QSfree(rowval);
   if( rhs != NULL )
      QSfree(rhs);
   if( sense != NULL )
      QSfree(sense);
   if( range != NULL )
      QSfree(range);
 
   QS_RETURN(rval);
}
 
/** multiplies a column with a non-zero scalar; the objective value is multiplied with the scalar, and the bounds
 *  are divided by the scalar; for negative scalars, the column's bounds are switched
 */
SCIP_RETCODE SCIPlpiScaleCol(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   col,                /**< column number to scale */
   SCIP_Real             scaleval            /**< scaling multiplier */
   )
{
   register int i;
   int collist[1];
   int* colcnt=0;
   int* colbeg=0;
   int* colind=0;
   double* colval=0;
   double* lb=0;
   double* ub=0;
   double* obj=0;
   int rval;
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
 
   lpi->solstat = 0;
 
   SCIPdebugMessage("scaling column %d with factor %g in QSopt\n", col, scaleval);
 
   /* get the column */
   collist[0] = col;
   rval = QSget_columns_list(lpi->prob, 1, collist, &colcnt, &colbeg, &colind, &colval, &obj, &lb, &ub, 0);
   QS_TESTG(rval, CLEANUP, " ");
 
   /* scale column coefficients */
   for( i = 0; i < colcnt[0]; ++i )
   {
      rval = QSchange_coef(lpi->prob, colind[i], col, colval[i]*scaleval);
      QS_TESTG(rval, CLEANUP, " ");
   }
 
   /* scale objective value */
   rval = QSchange_objcoef(lpi->prob, col, obj[0]*scaleval);
   QS_TESTG(rval, CLEANUP, " ");
 
   /* scale column bounds */
   if( scaleval < 0 )
   {
      scaleval = -scaleval;
      obj[0] = lb[0];
      lb[0] = -ub[0];
      ub[0] = -obj[0];
   }
   if( lb[0] > -QS_MAXDOUBLE )
      lb[0] *= scaleval;
   if( ub[0] < QS_MAXDOUBLE )
      ub[0] *= scaleval;
 
   if( lb[0] < -QS_MAXDOUBLE )
      lb[0] = -QS_MAXDOUBLE;
   if( ub[0] > QS_MAXDOUBLE )
      ub[0] = QS_MAXDOUBLE;
 
   rval = QSchange_bound(lpi->prob, col, 'L', lb[0]);
   QS_TESTG(rval, CLEANUP, " ");
   rval = QSchange_bound(lpi->prob, col, 'U', ub[0]);
   QS_TESTG(rval, CLEANUP, " ");
 
   /* ending */
 CLEANUP:
   if( colcnt != NULL )
      QSfree(colcnt);
   if( colbeg != NULL )
      QSfree(colbeg);
   if( colind != NULL )
      QSfree(colind);
   if( colval != NULL )
      QSfree(colval);
   if( obj != NULL )
      QSfree(obj);
   if( lb != NULL )
      QSfree(lb);
   if( ub != NULL )
      QSfree(ub);
 
   QS_RETURN(rval);
}
/**@} */
 
 
 
 
/*
 * Data Accessing Methods
 */
 
/**@name Data Accessing Methods */
/**@{ */
 
/** gets the number of rows in the LP */
SCIP_RETCODE SCIPlpiGetNRows(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int*                  nrows               /**< pointer to store the number of rows */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(nrows != NULL);
 
   SCIPdebugMessage("getting number of rows\n");
 
   *nrows = QSget_rowcount(lpi->prob);
 
   return SCIP_OKAY;
}
 
/** gets the number of columns in the LP */
SCIP_RETCODE SCIPlpiGetNCols(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int*                  ncols               /**< pointer to store the number of cols */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(ncols != NULL);
 
   SCIPdebugMessage("getting number of columns\n");
 
   *ncols = QSget_colcount(lpi->prob);
 
   return SCIP_OKAY;
}
 
/** gets the number of nonzero elements in the LP constraint matrix */
SCIP_RETCODE SCIPlpiGetNNonz(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int*                  nnonz               /**< pointer to store the number of nonzeros */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(nnonz != NULL);
 
   SCIPdebugMessage("getting number of columns\n");
 
   *nnonz = QSget_nzcount(lpi->prob);
 
   return SCIP_OKAY;
}
 
/** gets columns from LP problem object; the arrays have to be large enough to store all values
 *  Either both, lb and ub, have to be NULL, or both have to be non-NULL,
 *  either nnonz, beg, ind, and val have to be NULL, or all of them have to be non-NULL.
 */
SCIP_RETCODE SCIPlpiGetCols(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   firstcol,           /**< first column to get from LP */
   int                   lastcol,            /**< last column to get from LP */
   SCIP_Real*            lb,                 /**< buffer to store the lower bound vector, or NULL */
   SCIP_Real*            ub,                 /**< buffer to store the upper bound vector, or NULL */
   int*                  nnonz,              /**< pointer to store the number of nonzero elements returned, or NULL */
   int*                  beg,                /**< buffer to store start index of each column in ind- and val-array, or NULL */
   int*                  ind,                /**< buffer to store row indices of constraint matrix entries, or NULL */
   SCIP_Real*            val                 /**< buffer to store values of constraint matrix entries, or NULL */
   )
{
   const int len = lastcol - firstcol + 1;
   register int i;
   double* lval = NULL;
   double* llb = NULL;
   double* lub = NULL;
   int rval;
   int* lcnt = NULL;
   int* lbeg = NULL;
   int* lind = NULL;
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert((lb == NULL && ub == NULL) || (lb != NULL && ub != NULL));
   assert((nnonz != NULL && beg != NULL && ind != NULL && val != NULL) || (nnonz == NULL && beg == NULL && ind == NULL && val == NULL));
   assert(firstcol >= 0);
   assert(lastcol < QSget_colcount(lpi->prob));
   assert(len >= 0);
 
   SCIPdebugMessage("getting columns %d to %d\n", firstcol, lastcol);
 
   /* build col-list */
   SCIP_CALL( ensureColMem(lpi, len) );
   for( i = 0; i < len; ++i )
      lpi->iccnt[i] = i + firstcol;
 
   /* get data from qsopt */
   if ( nnonz != NULL )
      rval = QSget_columns_list(lpi->prob, len, lpi->iccnt, &lcnt, &lbeg, &lind, &lval, NULL, lb ? (&llb) : NULL, ub ? (&lub) : NULL, NULL);  /*lint !e826*/
   else
      rval = QSget_columns_list(lpi->prob, len, lpi->iccnt, NULL, NULL, NULL, NULL, NULL, lb ? (&llb) : NULL, ub ? (&lub) : NULL, NULL);  /*lint !e826*/
 
   QS_TESTG(rval, CLEANUP, " ");
 
   /* store in the user-provided data */
   if( nnonz != NULL )
   {
      assert(beg != NULL && ind != NULL && val != NULL); /* for lint */
 
      if( lcnt == NULL || lbeg == NULL || lind == NULL || lval == NULL )
      {
         SCIPerrorMessage("QSget_columns_list() failed to allocate memory.\n");
         return SCIP_LPERROR;
      }
 
      *nnonz = lbeg[len-1] + lcnt[len-1];
      for( i = 0 ; i < len ; i++ )
         beg[i] = lbeg[i];
      for( i = 0; i < *nnonz; ++i )
      {
         ind[i] = lind[i];
         val[i] = lval[i];
      }
   }
 
   if( lb != NULL )
   {
      assert( ub != NULL ); /* for lint */
 
      if( llb == NULL || lub == NULL ) /*lint !e774*/
      {
         SCIPerrorMessage("QSget_columns_list() failed to allocate memory.\n");
         return SCIP_LPERROR;
      }
 
      for( i = 0; i < len; ++i )
      {
         lb[i] = llb[i];
         ub[i] = lub[i];
      }
   }
 
 CLEANUP:
   if( lval != NULL )
      QSfree(lval);
   if( lub != NULL ) /*lint !e831 !e774*/
      QSfree(lub);
   if( llb != NULL ) /*lint !e831 !e774*/
      QSfree(llb);
   if( lind != NULL )
      QSfree(lind);
   if( lbeg != NULL )
      QSfree(lbeg);
   if( lcnt != NULL )
      QSfree(lcnt);
 
   QS_RETURN(rval);
}
 
/** gets rows from LP problem object; the arrays have to be large enough to store all values.
 *  Either both, lhs and rhs, have to be NULL, or both have to be non-NULL,
 *  either nnonz, beg, ind, and val have to be NULL, or all of them have to be non-NULL.
 */
SCIP_RETCODE SCIPlpiGetRows(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   firstrow,           /**< first row to get from LP */
   int                   lastrow,            /**< last row to get from LP */
   SCIP_Real*            lhs,                /**< buffer to store left hand side vector, or NULL */
   SCIP_Real*            rhs,                /**< buffer to store right hand side vector, or NULL */
   int*                  nnonz,              /**< pointer to store the number of nonzero elements returned, or NULL */
   int*                  beg,                /**< buffer to store start index of each row in ind- and val-array, or NULL */
   int*                  ind,                /**< buffer to store column indices of constraint matrix entries, or NULL */
   SCIP_Real*            val                 /**< buffer to store values of constraint matrix entries, or NULL */
   )
{
   const int len = lastrow - firstrow + 1;
   register int i;
   double* lval = NULL;
   double* lrhs = NULL;
   double* lrng = NULL;
   int rval;
   int* lcnt = NULL;
   int* lbeg = NULL;
   int* lind = NULL;
   char* lsense = NULL;
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert((lhs == NULL && rhs == NULL) || (rhs != NULL && lhs != NULL));
   assert((nnonz != NULL && beg != NULL && ind != NULL && val != NULL) || (nnonz == NULL && beg == NULL && ind == NULL && val == NULL));
   assert(firstrow >= 0);
   assert(lastrow < QSget_rowcount(lpi->prob));
   assert(len >= 0);
 
   SCIPdebugMessage("getting rows %d to %d\n", firstrow, lastrow);
 
   /* build row-list */
   SCIP_CALL( ensureRowMem(lpi, len) );
   for( i = 0; i < len; ++i )
      lpi->ircnt[i] = i + firstrow;
 
   /* get data from qsopt */
   if ( nnonz != NULL )
      rval = QSget_ranged_rows_list(lpi->prob, len, lpi->ircnt, &lcnt, &lbeg, &lind, &lval, rhs ? (&lrhs) : NULL, rhs ? (&lsense) : NULL, rhs ? (&lrng) : NULL, NULL);  /*lint !e826*/
   else
      rval = QSget_ranged_rows_list(lpi->prob, len, lpi->ircnt, NULL, NULL, NULL, NULL, rhs ? (&lrhs) : NULL, rhs ? (&lsense) : NULL, rhs ? (&lrng) : NULL, NULL);  /*lint !e826*/
 
   QS_TESTG(rval, CLEANUP, " ");
 
   /* store in the user-provided data */
   if( nnonz != NULL )
   {
      assert( beg != NULL && ind != NULL && val != NULL ); /* for lint */
 
      if( lcnt == NULL || lbeg == NULL || lind == NULL || lval == NULL )
      {
         SCIPerrorMessage("QSget_ranged_rows_list() failed to allocate memory.\n");
         return SCIP_LPERROR;
      }
 
      *nnonz = lbeg[len-1] + lcnt[len-1];
      for( i = 0 ; i < len; i++ )
         beg[i] = lbeg[i];
      for( i = 0; i < *nnonz; ++i )
      {
         ind[i] = lind[i];
         val[i] = lval[i];
      }
   }
 
   if( rhs != NULL )
   {
      if( lrhs == NULL || lrng == NULL || lsense == NULL ) /*lint !e774*/
      {
         SCIPerrorMessage("QSget_ranged_rows_list() failed to allocate memory.\n");
         return SCIP_LPERROR;
      }
 
      assert( lhs != NULL ); /* for lint */
 
      for( i = 0; i < len; ++i )
      {
         switch( lsense[i] )
         {
         case 'R':
            lhs[i] = lrhs[i];
            rhs[i] = lrhs[i] + lrng[i];
            break;
         case 'E':
            lhs[i] = lrhs[i];
            rhs[i] = lrhs[i];
            break;
         case 'L':
            rhs[i] = lrhs[i];
            lhs[i] = -QS_MAXDOUBLE;
            break;
         case 'G':
            lhs[i] = lrhs[i];
            rhs[i] = QS_MAXDOUBLE;
            break;
         default:
            SCIPerrorMessage("Unknown sense %c from QSopt", lsense[i]);
            SCIPABORT();
            return SCIP_INVALIDDATA; /*lint !e527*/
         }
      }
   }
 
 CLEANUP:
   if( lsense != NULL ) /*lint !e774*/
      QSfree(lsense);
   if( lrng != NULL ) /*lint !e774*/
      QSfree(lrng);
   if( lrhs != NULL ) /*lint !e774*/
      QSfree(lrhs);
   if( lval != NULL )
      QSfree(lval);
   if( lind != NULL )
      QSfree(lind);
   if( lbeg != NULL )
      QSfree(lbeg);
   if( lcnt != NULL )
      QSfree(lcnt);
 
   QS_RETURN(rval);
}
 
/** gets the objective sense of the LP */
SCIP_RETCODE SCIPlpiGetObjsen(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_OBJSEN*          objsen              /**< pointer to store objective sense */
   )
{
   int sense;
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert( objsen != NULL );
 
   QS_CONDRET( QSget_objsense(lpi->prob, &sense) );
   if ( sense == QS_MIN )
      *objsen = SCIP_OBJSEN_MINIMIZE;
   else
      *objsen = SCIP_OBJSEN_MAXIMIZE;
 
   return SCIP_OKAY;
}
 
/** gets objective coefficients from LP problem object */
SCIP_RETCODE SCIPlpiGetObj(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   firstcol,           /**< first column to get objective coefficient for */
   int                   lastcol,            /**< last column to get objective coefficient for */
   SCIP_Real*            vals                /**< array to store objective coefficients */
   )
{  /*lint --e{715}*/
   const int len = lastcol - firstcol + 1;
   register int i;
   double* qsoptvals;
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(vals != NULL);
   assert(firstcol >= 0);
   assert(lastcol < QSget_colcount(lpi->prob));
   assert(len >= 0);
 
   SCIPdebugMessage("getting objective values %d to %d\n", firstcol, lastcol);
 
   /* build col-list */
   SCIP_CALL(ensureColMem(lpi,len));
   for( i = 0; i < len; ++i )
      lpi->iccnt[i] = i + firstcol;
 
   /* get data from qsopt */
 
   /* There seems to be a bug in qsopt: The function QSget_obj_list might return values for slack variables. We
    * therefore have to use a workarround. */
#ifdef SCIP_DISABLED_CODE
   QS_CONDRET( QSget_obj_list(lpi->prob, len, lpi->iccnt, vals) );
#endif
 
   QS_CONDRET( QSget_columns_list(lpi->prob, len, lpi->iccnt, NULL, NULL, NULL, NULL, &qsoptvals, NULL, NULL, NULL) );
   for (i = 0; i < len; ++i)
      vals[i] = qsoptvals[i];
   free( qsoptvals );
 
   return SCIP_OKAY;
}
 
/** gets current bounds from LP problem object */
SCIP_RETCODE SCIPlpiGetBounds(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   firstcol,           /**< first column to get objective value for */
   int                   lastcol,            /**< last column to get objective value for */
   SCIP_Real*            lbs,                /**< array to store lower bound values, or NULL */
   SCIP_Real*            ubs                 /**< array to store upper bound values, or NULL */
   )
{
   const int len = lastcol - firstcol + 1;
   register int i;
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(firstcol >= 0);
   assert(lastcol < QSget_colcount(lpi->prob));
   assert(len >= 0);
 
   SCIPdebugMessage("getting bound values %d to %d\n", firstcol, lastcol);
 
   /* build col-list */
   SCIP_CALL(ensureColMem(lpi,len));
   for( i = 0; i < len; ++i )
      lpi->iccnt[i] = i + firstcol;
 
   /* get data from qsopt */
   QS_CONDRET( QSget_bounds_list(lpi->prob, len, lpi->iccnt, lbs, ubs) );
 
   return SCIP_OKAY;
}
 
/** gets current row sides from LP problem object */
SCIP_RETCODE SCIPlpiGetSides(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   firstrow,           /**< first row to get sides for */
   int                   lastrow,            /**< last row to get sides for */
   SCIP_Real*            lhss,               /**< array to store left hand side values, or NULL */
   SCIP_Real*            rhss                /**< array to store right hand side values, or NULL */
   )
{
   const int len = lastrow - firstrow + 1;
   register int i;
   double* lrhs=0, *lrng=0;
   int rval;
   char* lsense=0;
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(rhss != NULL);
   assert(lhss != NULL);
   assert(firstrow >= 0);
   assert(lastrow < QSget_rowcount(lpi->prob));
   assert(len >= 0);
 
   SCIPdebugMessage("getting row sides %d to %d\n", firstrow, lastrow);
 
   /* build row-list */
   SCIP_CALL( ensureRowMem(lpi, len) );
   for( i = 0; i < len; ++i )
      lpi->ircnt[i] = i + firstrow;
 
   /* get data from qsopt */
   rval = QSget_ranged_rows_list(lpi->prob, len, lpi->ircnt, 0, 0, 0, 0, &lrhs, &lsense, &lrng, 0);
   QS_TESTG(rval, CLEANUP, " ");
 
   /* store in the user-provided data */
   for( i = 0; i < len; ++i )
   {
      switch( lsense[i] )
      {
      case 'R':
         lhss[i] = lrhs[i];
         rhss[i] = lrhs[i] + lrng[i];
         break;
      case 'E':
         lhss[i] = rhss[i] = lrhs[i];
         break;
      case 'L':
         rhss[i] = lrhs[i];
         lhss[i] = -QS_MAXDOUBLE;
         break;
      case 'G':
         lhss[i] = lrhs[i];
         rhss[i] = QS_MAXDOUBLE;
         break;
      default:
         SCIPerrorMessage("Unknown sense %c from QSopt", lsense[i]);
         SCIPABORT();
         return SCIP_INVALIDDATA; /*lint !e527*/
      }
   }
 
 CLEANUP:
   if( lsense != NULL )
      QSfree(lsense);
   if( lrng != NULL )
      QSfree(lrng);
   if( lrhs != NULL )
      QSfree(lrhs);
 
   QS_RETURN(rval);
}
 
/** gets a single coefficient */
SCIP_RETCODE SCIPlpiGetCoef(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   row,                /**< row number of coefficient */
   int                   col,                /**< column number of coefficient */
   SCIP_Real*            val                 /**< pointer to store the value of the coefficient */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(val != NULL);
 
   SCIPdebugMessage("getting coefficient of row %d col %d\n", row, col);
 
   QS_CONDRET( QSget_coef(lpi->prob, row, col, val) );
 
   return SCIP_OKAY;
}
 
/**@} */
 
 
 
 
/*
 * Solving Methods
 */
 
/**@name Solving Methods */
/**@{ */
 
/** calls primal simplex to solve the LP */
SCIP_RETCODE SCIPlpiSolvePrimal(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
 
   SCIPdebugMessage("calling QSopt primal simplex: %d cols, %d rows, %d nz\n", QSget_colcount(lpi->prob),
      QSget_rowcount(lpi->prob), QSget_nzcount(lpi->prob));
 
   QS_CONDRET( QSopt_primal(lpi->prob, &(lpi->solstat)) );
   lpi->algo = LPI_QSOPT_ALGO_PRIMAL;
 
   return SCIP_OKAY;
}
 
/** calls dual simplex to solve the LP */
SCIP_RETCODE SCIPlpiSolveDual(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
 
   SCIPdebugMessage("calling QSopt dual simplex: %d cols, %d rows, %d nz\n", QSget_colcount(lpi->prob),
      QSget_rowcount(lpi->prob), QSget_nzcount(lpi->prob));
 
   QS_CONDRET( QSopt_dual(lpi->prob, &(lpi->solstat)) );
   lpi->algo = LPI_QSOPT_ALGO_DUAL;
 
   return SCIP_OKAY;
}
 
/** calls barrier or interior point algorithm to solve the LP with crossover to simplex basis */
SCIP_RETCODE SCIPlpiSolveBarrier(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_Bool             crossover           /**< perform crossover */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   SCIP_UNUSED( crossover );
 
   return SCIPlpiSolveDual(lpi);
}
 
/** start strong branching - call before any strong branching */
SCIP_RETCODE SCIPlpiStartStrongbranch(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
 
   /* currently do nothing */
   return SCIP_OKAY;
}
 
/** end strong branching - call after any strong branching */
SCIP_RETCODE SCIPlpiEndStrongbranch(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
 
   /* currently do nothing */
   return SCIP_OKAY;
}
 
/** performs strong branching iterations on one @b fractional candidate */
SCIP_RETCODE SCIPlpiStrongbranchFrac(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   col,                /**< column to apply strong branching on */
   SCIP_Real             psol,               /**< fractional current primal solution value of column */
   int                   itlim,              /**< iteration limit for strong branchings */
   SCIP_Real*            down,               /**< stores dual bound after branching column down */
   SCIP_Real*            up,                 /**< stores dual bound after branching column up */
   SCIP_Bool*            downvalid,          /**< stores whether the returned down value is a valid dual bound;
                                              *   otherwise, it can only be used as an estimate value */
   SCIP_Bool*            upvalid,            /**< stores whether the returned up value is a valid dual bound;
                                              *   otherwise, it can only be used as an estimate value */
   int*                  iter                /**< stores total number of strong branching iterations, or -1; may be NULL */
   )
{
   int nit;
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(down != NULL);
   assert(up != NULL);
   assert(downvalid != NULL);
   assert(upvalid != NULL);
 
   SCIPdebugMessage("calling QSopt strong branching on variable %d with fractional value (%d it lim)\n", col, itlim);
 
   /* results of QSopt are valid in any case */
   *downvalid = TRUE;
   *upvalid = TRUE;
 
   assert( ! EPSISINT(psol, FEASTOL) );
 
   /* call QSopt */
   QS_CONDRET( QSopt_strongbranch(lpi->prob, 1, &col, &psol, down, up, itlim, QS_MAXDOUBLE) );
 
   QS_CONDRET( QSget_itcnt(lpi->prob, 0, 0, 0, 0, &nit) );
 
   if( iter )
      *iter = nit - lpi->previt;
   lpi->previt = nit;
 
   return SCIP_OKAY;
}
 
/** performs strong branching iterations on given @b fractional candidates */
SCIP_RETCODE SCIPlpiStrongbranchesFrac(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int*                  cols,               /**< columns to apply strong branching on */
   int                   ncols,              /**< number of columns */
   SCIP_Real*            psols,              /**< fractional current primal solution values of columns */
   int                   itlim,              /**< iteration limit for strong branchings */
   SCIP_Real*            down,               /**< stores dual bounds after branching columns down */
   SCIP_Real*            up,                 /**< stores dual bounds after branching columns up */
   SCIP_Bool*            downvalid,          /**< stores whether the returned down values are valid dual bounds;
                                              *   otherwise, they can only be used as an estimate values */
   SCIP_Bool*            upvalid,            /**< stores whether the returned up values are a valid dual bounds;
                                              *   otherwise, they can only be used as an estimate values */
   int*                  iter                /**< stores total number of strong branching iterations, or -1; may be NULL */
   )
{
   int nit;
   int j;
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(cols != NULL);
   assert(psols != NULL);
   assert(down != NULL);
   assert(up != NULL);
   assert(downvalid != NULL);
   assert(upvalid != NULL);
 
   SCIPdebugMessage("calling QSopt strong branching on %d variables with fractional value (%d it lim)\n", ncols, itlim);
 
   /* results of QSopt are valid in any case */
   for( j = 0; j < ncols; ++j )
   {
      downvalid[j] = TRUE;
      upvalid[j] = TRUE;
      assert( ! EPSISINT(psols[j], FEASTOL) );
   }
 
   /* call QSopt */
   QS_CONDRET( QSopt_strongbranch(lpi->prob, ncols, cols, psols, down, up, itlim, QS_MAXDOUBLE) );
 
   QS_CONDRET( QSget_itcnt(lpi->prob, 0, 0, 0, 0, &nit) );
 
   if( iter )
      *iter = nit - lpi->previt;
   lpi->previt = nit;
 
   return SCIP_OKAY;
}
 
/** performs strong branching iterations on one candidate with @b integral value */
SCIP_RETCODE SCIPlpiStrongbranchInt(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   col,                /**< column to apply strong branching on */
   SCIP_Real             psol,               /**< current integral primal solution value of column */
   int                   itlim,              /**< iteration limit for strong branchings */
   SCIP_Real*            down,               /**< stores dual bound after branching column down */
   SCIP_Real*            up,                 /**< stores dual bound after branching column up */
   SCIP_Bool*            downvalid,          /**< stores whether the returned down value is a valid dual bound;
                                              *   otherwise, it can only be used as an estimate value */
   SCIP_Bool*            upvalid,            /**< stores whether the returned up value is a valid dual bound;
                                              *   otherwise, it can only be used as an estimate value */
   int*                  iter                /**< stores total number of strong branching iterations, or -1; may be NULL */
   )
{
   SCIP_Real objval;
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(down != NULL);
   assert(up != NULL);
   assert(downvalid != NULL);
   assert(upvalid != NULL);
 
   SCIPdebugMessage("calling QSopt strong branching on variable %d with integral value (%d it lim)\n", col, itlim);
 
   assert(EPSISINT(psol, FEASTOL));
 
   /* QSopt cannot directly strong branch on integral values! We thus return the current objective
    * value for both cases. Could also implement a manual search as in lpi_cpx.c
    */
   QS_CONDRET( QSget_objval(lpi->prob, &objval) );
 
   *down = objval;
   *up = objval;
   *downvalid = TRUE;
   *upvalid = TRUE;
 
   if( iter )
      *iter = 0;
 
   return SCIP_OKAY;
}
 
/** performs strong branching iterations on given candidates with @b integral values */
SCIP_RETCODE SCIPlpiStrongbranchesInt(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int*                  cols,               /**< columns to apply strong branching on */
   int                   ncols,              /**< number of columns */
   SCIP_Real*            psols,              /**< current integral primal solution values of columns */
   int                   itlim,              /**< iteration limit for strong branchings */
   SCIP_Real*            down,               /**< stores dual bounds after branching columns down */
   SCIP_Real*            up,                 /**< stores dual bounds after branching columns up */
   SCIP_Bool*            downvalid,          /**< stores whether the returned down values are valid dual bounds;
                                              *   otherwise, they can only be used as an estimate values */
   SCIP_Bool*            upvalid,            /**< stores whether the returned up values are a valid dual bounds;
                                              *   otherwise, they can only be used as an estimate values */
   int*                  iter                /**< stores total number of strong branching iterations, or -1; may be NULL */
   )
{  /*lint --e{715}*/
   SCIP_Real objval;
   int j;
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(down != NULL);
   assert(up != NULL);
   assert(downvalid != NULL);
   assert(upvalid != NULL);
   SCIP_UNUSED( cols );
 
   SCIPdebugMessage("calling QSopt strong branching on %d variables with integral value (%d it lim)\n", ncols, itlim);
 
   /* QSopt cannot directly strong branch on integral values! We thus return the current objective
    * value for all cases. Could also implement a manual search as in lpi_cpx.c. */
   QS_CONDRET( QSget_objval(lpi->prob, &objval) );
 
   for( j = 0; j < ncols; ++j )
   {
      assert(EPSISINT(psols[j], FEASTOL));
      down[j] = objval;
      up[j] = objval;
      downvalid[j] = TRUE;
      upvalid[j] = TRUE;
   }
 
   if( iter )
      *iter = 0;
 
   return SCIP_OKAY;
}
/**@} */
 
 
 
 
/*
 * Solution Information Methods
 */
 
/**@name Solution Information Methods */
/**@{ */
 
/** returns whether a solve method was called after the last modification of the LP */
SCIP_Bool SCIPlpiWasSolved(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{
   assert(lpi!=NULL);
   assert(lpi->prob!=NULL);
 
   return (lpi->solstat != 0 && lpi->solstat != QS_LP_MODIFIED);
}
 
/** gets information about primal and dual feasibility of the current LP solution
 *
 *  The feasibility information is with respect to the last solving call and it is only relevant if SCIPlpiWasSolved()
 *  returns true. If the LP is changed, this information might be invalidated.
 *
 *  Note that @a primalfeasible and @a dualfeasible should only return true if the solver has proved the respective LP to
 *  be feasible. Thus, the return values should be equal to the values of SCIPlpiIsPrimalFeasible() and
 *  SCIPlpiIsDualFeasible(), respectively. Note that if feasibility cannot be proved, they should return false (even if
 *  the problem might actually be feasible).
 */
SCIP_RETCODE SCIPlpiGetSolFeasibility(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_Bool*            primalfeasible,     /**< pointer to store primal feasibility status */
   SCIP_Bool*            dualfeasible        /**< pointer to store dual feasibility status */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(lpi->solstat != 0);
   assert(primalfeasible != NULL);
   assert(dualfeasible != NULL);
 
   SCIPdebugMessage("getting solution feasibility\n");
 
   if( lpi->solstat == QS_LP_OPTIMAL || (lpi->algo == LPI_QSOPT_ALGO_PRIMAL && lpi->solstat == QS_LP_UNBOUNDED) )
      *primalfeasible = TRUE;
   else
      *primalfeasible = FALSE;
 
   if( lpi->solstat == QS_LP_OPTIMAL || (lpi->algo == LPI_QSOPT_ALGO_DUAL && lpi->solstat == QS_LP_INFEASIBLE) || lpi->solstat == QS_LP_OBJ_LIMIT )
      *dualfeasible = TRUE;
   else
      *dualfeasible = FALSE;
 
   return SCIP_OKAY;
}
 
/** returns TRUE iff LP is proven to have a primal unbounded ray (but not necessary a primal feasible point);
 *  this does not necessarily mean, that the solver knows and can return the primal ray
 */
SCIP_Bool SCIPlpiExistsPrimalRay(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
 
   SCIPdebugMessage("checking primal ray existence\n");
 
   return (lpi->solstat == QS_LP_UNBOUNDED);
}
 
/** returns TRUE iff LP is proven to have a primal unbounded ray (but not necessary a primal feasible point),
 *  and the solver knows and can return the primal ray
 */
SCIP_Bool SCIPlpiHasPrimalRay(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
 
   SCIPdebugMessage("checking for primal ray\n");
 
   /* the current version of QSopt cannot give a primal certificate of unboundedness */
   return FALSE;
}
 
/** returns TRUE iff LP is proven to be primal unbounded */
SCIP_Bool SCIPlpiIsPrimalUnbounded(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
 
   SCIPdebugMessage("checking for primal unboundedness\n");
 
   return (lpi->algo == LPI_QSOPT_ALGO_PRIMAL && lpi->solstat == QS_LP_UNBOUNDED);
}
 
/** returns TRUE iff LP is proven to be primal infeasible */
SCIP_Bool SCIPlpiIsPrimalInfeasible(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
 
   SCIPdebugMessage("checking for primal infeasibility\n");
 
   (void) QSget_status(lpi->prob, &(lpi->solstat));
 
   return (lpi->solstat == QS_LP_INFEASIBLE);
}
 
/** returns TRUE iff LP is proven to be primal feasible */
SCIP_Bool SCIPlpiIsPrimalFeasible(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
 
   SCIPdebugMessage("checking for primal feasibility\n");
 
   return (lpi->solstat == QS_LP_OPTIMAL || lpi->solstat == QS_LP_UNBOUNDED);
}
 
/** returns TRUE iff LP is proven to have a dual unbounded ray (but not necessary a dual feasible point);
 *  this does not necessarily mean, that the solver knows and can return the dual ray
 */
SCIP_Bool SCIPlpiExistsDualRay(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
 
   SCIPdebugMessage("checking for dual ray availability\n");
 
   return (lpi->algo == LPI_QSOPT_ALGO_DUAL && lpi->solstat == QS_LP_INFEASIBLE);
}
 
/** returns TRUE iff LP is proven to have a dual unbounded ray (but not necessary a dual feasible point),
 *  and the solver knows and can return the dual ray
 */
SCIP_Bool SCIPlpiHasDualRay(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
 
   SCIPdebugMessage("checking for dual ray availability\n");
 
   return (lpi->algo == LPI_QSOPT_ALGO_DUAL && lpi->solstat == QS_LP_INFEASIBLE);
}
 
/** returns TRUE iff LP is dual unbounded */
SCIP_Bool SCIPlpiIsDualUnbounded(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
 
   SCIPdebugMessage("checking for dual unboundedness\n");
 
   return (lpi->algo == LPI_QSOPT_ALGO_DUAL && lpi->solstat == QS_LP_INFEASIBLE);
}
 
/** returns TRUE iff LP is dual infeasible */
SCIP_Bool SCIPlpiIsDualInfeasible(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
 
   SCIPdebugMessage("checking for dual infeasibility\n");
 
   return (lpi->algo == LPI_QSOPT_ALGO_DUAL && lpi->solstat == QS_LP_INFEASIBLE);
}
 
/** returns TRUE iff LP is proven to be dual feasible */
SCIP_Bool SCIPlpiIsDualFeasible(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
 
   SCIPdebugMessage("checking for dual feasibility\n");
 
   return ( lpi->solstat == QS_LP_OPTIMAL || (lpi->algo == LPI_QSOPT_ALGO_DUAL && lpi->solstat == QS_LP_INFEASIBLE) || lpi->solstat == QS_LP_OBJ_LIMIT );
}
 
/** returns TRUE iff LP was solved to optimality */
SCIP_Bool SCIPlpiIsOptimal(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
 
   SCIPdebugMessage("checking for optimality\n");
 
   return (lpi->solstat == QS_LP_OPTIMAL);
}
 
/** returns TRUE iff current LP solution is stable
 *
 *  This function should return true if the solution is reliable, i.e., feasible and optimal (or proven
 *  infeasible/unbounded) with respect to the original problem. The optimality status might be with respect to a scaled
 *  version of the problem, but the solution might not be feasible to the unscaled original problem; in this case,
 *  SCIPlpiIsStable() should return false.
 */
SCIP_Bool SCIPlpiIsStable(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
 
   SCIPdebugMessage("checking for numerical stability\n");
 
   return (lpi->solstat != QS_LP_NUMERR);
}
 
/** returns TRUE iff the objective limit was reached */
SCIP_Bool SCIPlpiIsObjlimExc(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
 
   SCIPdebugMessage("checking for objective limit exceeded\n");
 
   return (lpi->solstat == QS_LP_OBJ_LIMIT);
}
 
/** returns TRUE iff the iteration limit was reached */
SCIP_Bool SCIPlpiIsIterlimExc(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
 
   SCIPdebugMessage("checking for iteration limit exceeded\n");
 
   return (lpi->solstat == QS_LP_ITER_LIMIT);
}
 
/** returns TRUE iff the time limit was reached */
SCIP_Bool SCIPlpiIsTimelimExc(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
 
   SCIPdebugMessage("checking for time limit exceeded\n");
 
   return (lpi->solstat == QS_LP_TIME_LIMIT);
}
 
/** returns the internal solution status of the solver */
int SCIPlpiGetInternalStatus(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
 
   SCIPdebugMessage("getting internal solution status\n");
 
   return lpi->solstat;
}
 
/** tries to reset the internal status of the LP solver in order to ignore an instability of the last solving call */
SCIP_RETCODE SCIPlpiIgnoreInstability(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_Bool*            success             /**< pointer to store, whether the instability could be ignored */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(success != NULL);
 
   SCIPdebugMessage("ignore instability (will fail)\n");
 
   /* it seems that in QSopt this does not make much sense */
   *success = FALSE;
 
   return SCIP_OKAY;
}
 
/** gets objective value of solution */
SCIP_RETCODE SCIPlpiGetObjval(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_Real*            objval              /**< stores the objective value */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(objval != NULL);
 
   SCIPdebugMessage("getting solution's objective value\n");
 
   QS_CONDRET( QSget_objval(lpi->prob, objval) );
 
   return SCIP_OKAY;
}
 
/** gets primal and dual solution vectors for feasible LPs
 *
 *  Before calling this function, the caller must ensure that the LP has been solved to optimality, i.e., that
 *  SCIPlpiIsOptimal() returns true.
 */
SCIP_RETCODE SCIPlpiGetSol(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_Real*            objval,             /**< stores the objective value, may be NULL if not needed */
   SCIP_Real*            primsol,            /**< primal solution vector, may be NULL if not needed */
   SCIP_Real*            dualsol,            /**< dual solution vector, may be NULL if not needed */
   SCIP_Real*            activity,           /**< row activity vector, may be NULL if not needed */
   SCIP_Real*            redcost             /**< reduced cost vector, may be NULL if not needed */
   )
{
   int nrows;
   register int i;
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
 
   SCIPdebugMessage("getting solution\n");
 
   /* Do nothing if the status is not optimal, e.g., if we reached the objective limit or the problem is
    * infeasible. QSopt cannot return a solution in this case.*/
   if ( lpi->solstat != QS_LP_OPTIMAL )
      return SCIP_OKAY;
 
   nrows = QSget_rowcount(lpi->prob);
   SCIP_CALL( ensureRowMem(lpi, nrows) );
 
   QS_CONDRET( QSget_solution(lpi->prob, objval, primsol, dualsol, lpi->irng, redcost) );
 
   /* build back the activity */
   if( activity )
   {
      QS_CONDRET( QSget_rhs(lpi->prob, lpi->irhs) );
      QS_CONDRET( QSget_senses(lpi->prob, lpi->isen) );
 
      for( i = 0; i < nrows; ++i )
      {
         switch( lpi->isen[i] )
         {
         case 'R':
         case 'E':
         case 'G':
            activity[i] = lpi->irhs[i] + lpi->irng[i];
            break;
         case 'L':
            activity[i] = lpi->irhs[i] - lpi->irng[i];
            break;
         default:
            SCIPerrorMessage("unknown sense %c\n", lpi->isen[i]);
            SCIPABORT();
            return SCIP_INVALIDDATA; /*lint !e527*/
         }
      }
   }
 
#ifdef SCIP_DISABLED_CODE
   {
      int stat;
      int ncols;
      int sense;
      char* icstat;
      char* irstat;
 
      QSget_status(lpi->prob, &stat);
      if( stat == QS_LP_OPTIMAL )
      {
         QS_CONDRET( QSget_objsense(lpi->prob, &sense) );
         ncols = QSget_colcount(lpi->prob);
 
         SCIP_CALL(ensureTabMem(lpi, nrows + ncols));
         icstat = lpi->ibas;
         irstat = lpi->ibas + ncols;
 
         QS_CONDRET( QSget_basis_array(lpi->prob,icstat, irstat) );
 
         for( i = ncols ; i-- ; )
         {
            switch( icstat[i] )
            {
            case QS_COL_BSTAT_BASIC:
            case QS_COL_BSTAT_FREE:
               if( fabs(redcost[i])> FEASTOL )
               {
                  SCIPerrorMessage("stat col[%d] = %c, rd[%d] = %lg sense %d\n", i, icstat[i], i, redcost[i] * sense, sense);
                  SCIPABORT();
                  return SCIP_INVALIDDATA; /*lint !e527*/
               }
               break;
            case QS_COL_BSTAT_UPPER:
               if( redcost[i] * sense > FEASTOL )
               {
                  SCIPerrorMessage("stat col[%d] = %c, rd[%d] = %lg sense %d\n", i, icstat[i], i, redcost[i] * sense, sense);
                  SCIPABORT();
                  return SCIP_INVALIDDATA; /*lint !e527*/
               }
               break;
            case QS_COL_BSTAT_LOWER:
               if( redcost[i] * sense < -FEASTOL )
               {
                  SCIPerrorMessage("stat col[%d] = %c, rd[%d] = %lg sense %d\n", i, icstat[i], i, redcost[i] * sense, sense);
                  SCIPABORT();
                  return SCIP_INVALIDDATA; /*lint !e527*/
               }
               break;
            default:
               SCIPerrorMessage("unknown stat col[%d] = %c, rd[%d] = %lg\n", i, icstat[i], i, redcost[i] * sense);
               SCIPABORT();
               return SCIP_INVALIDDATA; /*lint !e527*/
            }
         }
      }
   }
#endif
 
   return SCIP_OKAY;
}
 
/** gets primal ray for unbounded LPs */
SCIP_RETCODE SCIPlpiGetPrimalRay(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_Real*            ray                 /**< primal ray */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(ray != NULL);
 
   SCIPerrorMessage("SCIPlpiGetPrimalRay() not supported by QSopt.\n");
 
   return SCIP_LPERROR;
}
 
/** gets dual Farkas proof for infeasibility */
SCIP_RETCODE SCIPlpiGetDualfarkas(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_Real*            dualfarkas          /**< dual Farkas row multipliers */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(dualfarkas != NULL);
 
   SCIPdebugMessage("calling QSopt dual Farkas: %d cols, %d rows, %d non zeros\n", QSget_colcount (lpi->prob),
      QSget_rowcount(lpi->prob), QSget_nzcount(lpi->prob));
 
   QS_CONDRET( QSget_infeas_array(lpi->prob, dualfarkas) );
 
   return SCIP_OKAY;
}
 
/** gets the number of LP iterations of the last solve call */
SCIP_RETCODE SCIPlpiGetIterations(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int*                  iterations          /**< pointer to store the number of iterations of the last solve call */
   )
{
   int nit;
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(iterations != NULL);
 
   QS_CONDRET( QSget_itcnt(lpi->prob, 0, 0, 0, 0, &nit) );
 
   *iterations = nit - lpi->previt;
   lpi->previt = nit;
 
   return SCIP_OKAY;
}
 
/** gets information about the quality of an LP solution
 *
 *  Such information is usually only available, if also a (maybe not optimal) solution is available.
 *  The LPI should return SCIP_INVALID for @p quality, if the requested quantity is not available.
 */
SCIP_RETCODE SCIPlpiGetRealSolQuality(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_LPSOLQUALITY     qualityindicator,   /**< indicates which quality should be returned */
   SCIP_Real*            quality             /**< pointer to store quality number */
   )
{  /*lint --e{715}*/
   assert(lpi != NULL);
   assert(quality != NULL);
   SCIP_UNUSED( qualityindicator );
 
   *quality = SCIP_INVALID;
 
   return SCIP_OKAY;
}
 
/**@} */
 
 
 
 
/*
 * LP Basis Methods
 */
 
/**@name LP Basis Methods */
/**@{ */
 
/** gets current basis status for columns and rows; arrays must be large enough to store the basis status */
SCIP_RETCODE SCIPlpiGetBase(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int*                  cstat,              /**< array to store column basis status, or NULL */
   int*                  rstat               /**< array to store row basis status, or NULL */
   )
{
   int ncols;
   int nrows;
   char* icstat;
   char* irstat;
   register int i;
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
 
   SCIPdebugMessage("saving QSopt basis into %p/%p\n", (void*)cstat, (void*)rstat);
 
   ncols = QSget_colcount(lpi->prob);
   nrows = QSget_rowcount(lpi->prob);
 
   SCIP_CALL( ensureTabMem(lpi, nrows + ncols) );
   SCIP_CALL( ensureRowMem(lpi, nrows) );
 
   /* get senses */
   QS_CONDRET( QSget_senses(lpi->prob, lpi->isen) );
 
   /* get basis */
   icstat = lpi->ibas;
   irstat = lpi->ibas + ncols;
   QS_CONDRET( QSget_basis_array(lpi->prob, icstat, irstat) );
 
   /* Now we must transform QSopt codes into SCIP codes.
    * We have the following cases:
    * 'G': b <= ax       -> b = ax - s, s >= 0
    * 'L': ax <= b       -> b = ax + s, s >= 0
    * 'R': b <= ax <= c  -> c - b = ax + s, 0 <= s <= c - b
    */
   for( i = 0; i < nrows; ++i )
   {
      switch( irstat[i] )
      {
      case QS_ROW_BSTAT_LOWER:
         if ( lpi->isen[i] == 'L' )
            rstat[i] = (char) SCIP_BASESTAT_UPPER;
         else
            rstat[i] = (char) SCIP_BASESTAT_LOWER;
         break;
      case QS_ROW_BSTAT_BASIC:
         rstat[i] = (char) SCIP_BASESTAT_BASIC;
         break;
      case QS_ROW_BSTAT_UPPER:
         rstat[i] = (char) SCIP_BASESTAT_UPPER;
         break;
      default:
         SCIPerrorMessage("Unknown row basic status %c", rstat[i]);
         SCIPABORT();
         return SCIP_INVALIDDATA; /*lint !e527*/
      }
   }
   for( i = 0; i < ncols; ++i )
   {
      switch( icstat[i] )
      {
      case QS_COL_BSTAT_LOWER:
         cstat[i] = (char) SCIP_BASESTAT_LOWER;
         break;
      case QS_COL_BSTAT_BASIC:
         cstat[i] = (char) SCIP_BASESTAT_BASIC;
         break;
      case QS_COL_BSTAT_UPPER:
         cstat[i] = (char) SCIP_BASESTAT_UPPER;
         break;
      case QS_COL_BSTAT_FREE:
         cstat[i] = (char) SCIP_BASESTAT_ZERO;
         break;
      default:
         SCIPerrorMessage("Unknown column basic status %c", cstat[i]);
         SCIPABORT();
         return SCIP_INVALIDDATA; /*lint !e527*/
      }
   }
   return SCIP_OKAY;
}
 
/** sets current basis status for columns and rows */
SCIP_RETCODE SCIPlpiSetBase(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   const int*            cstat,              /**< array with column basis status */
   const int*            rstat               /**< array with row basis status */
   )
{
   int ncols;
   int nrows;
   register int i;
   char* icstat;
   char* irstat;
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
 
   SCIP_CALL( SCIPlpiGetNRows(lpi, &nrows) );
   SCIP_CALL( SCIPlpiGetNCols(lpi, &ncols) );
 
   assert(cstat != NULL || ncols == 0);
   assert(rstat != NULL || nrows == 0);
 
   SCIPdebugMessage("loading basis %p/%p into QSopt\n", (void*)cstat, (void*)rstat);
 
   SCIP_CALL( ensureTabMem(lpi, ncols) );
   SCIP_CALL( ensureRowMem(lpi, nrows) );
 
   /* get senses */
   QS_CONDRET( QSget_senses(lpi->prob, lpi->isen) );
 
   icstat = lpi->ibas;
   irstat = lpi->ibas + ncols;
 
   /* now we must transform QSopt codes into SCIP codes */
   for( i = 0; i < nrows; ++i )
   {
      switch( rstat[i] ) /*lint !e613*/
      {
      case SCIP_BASESTAT_LOWER:
         irstat[i] = QS_ROW_BSTAT_LOWER;
         break;
      case SCIP_BASESTAT_BASIC:
         irstat[i] = QS_ROW_BSTAT_BASIC;
         break;
      case SCIP_BASESTAT_UPPER:
         if ( lpi->isen[i] == 'L' )
            irstat[i] = QS_ROW_BSTAT_LOWER;
         else
            irstat[i] = QS_ROW_BSTAT_UPPER;
         break;
      default:
         SCIPerrorMessage("Unknown row basic status %d", rstat[i]); /*lint !e613*/
         SCIPABORT();
         return SCIP_INVALIDDATA; /*lint !e527*/
      }
   }
   for( i = 0; i < ncols; ++i )
   {
      switch( cstat[i] ) /*lint !e613*/
      {
      case SCIP_BASESTAT_LOWER:
         icstat[i] = QS_COL_BSTAT_LOWER;
         break;
      case SCIP_BASESTAT_BASIC:
         icstat[i] = QS_COL_BSTAT_BASIC;
         break;
      case SCIP_BASESTAT_UPPER:
         icstat[i] = QS_COL_BSTAT_UPPER;
         break;
      case SCIP_BASESTAT_ZERO:
         icstat[i] = QS_COL_BSTAT_FREE;
         break;
      default:
         SCIPerrorMessage("Unknown column basic status %d", cstat[i]); /*lint !e613*/
         SCIPABORT();
         return SCIP_INVALIDDATA; /*lint !e527*/
      }
   }
 
   /* set the basis */
   QS_CONDRET( QSload_basis_array(lpi->prob, icstat, irstat) );
 
   return SCIP_OKAY;
}
 
/** returns the indices of the basic columns and rows; basic column n gives value n, basic row m gives value -1-m */
SCIP_RETCODE SCIPlpiGetBasisInd(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int*                  bind                /**< pointer to store basis indices ready to keep number of rows entries */
   )
{
   int nrows;
   int ncols;
   int stat;
   register int i;
 
   assert(lpi!=NULL);
   assert(lpi->prob!=NULL);
   assert(bind != NULL);
 
   SCIPdebugMessage("getting basis information\n");
 
   nrows = QSget_rowcount(lpi->prob);
   ncols = QSget_colcount(lpi->prob);
 
   QS_CONDRET( QSget_status(lpi->prob, &stat) );
   if ( stat == QS_LP_UNSOLVED || stat == QS_LP_MODIFIED || stat == QS_LP_NUMERR )
   {
      QS_CONDRET( QSopt_dual(lpi->prob, &(lpi->solstat)) );
   }
 
   QS_CONDRET( QSget_basis_order(lpi->prob, bind) );
 
   /* transform QSopt basis header into SCIP format */
   for( i = 0; i < nrows; ++i )
   {
      if( bind[i] >= ncols )
         bind[i] = -(bind[i] - ncols) - 1;
   }
 
   return SCIP_OKAY;
}
 
/** get row of inverse basis matrix B^-1
 *
 *  @note The LP interface defines slack variables to have coefficient +1. This means that if, internally, the LP solver
 *        uses a -1 coefficient, then rows associated with slacks variables whose coefficient is -1, should be negated;
 *        see also the explanation in lpi.h.
 *
 *  @todo check that the result is in terms of the LP interface definition
 */
SCIP_RETCODE SCIPlpiGetBInvRow(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   r,                  /**< row number */
   SCIP_Real*            coef,               /**< pointer to store the coefficients of the row */
   int*                  inds,               /**< array to store the non-zero indices, or NULL */
   int*                  ninds               /**< pointer to store the number of non-zero indices, or NULL
                                              *   (-1: if we do not store sparsity information) */
   )
{  /*lint --e{715} */
   int nrows;
   int i;
 
   assert(lpi!=NULL);
   assert(lpi->prob!=NULL);
   assert(coef != NULL);
   SCIP_UNUSED( inds );
 
   nrows = QSget_rowcount(lpi->prob);
   assert( 0 <= r && r < nrows );
 
   SCIPdebugMessage("getting binv-row %d from Qsopt %d cols, %d rows, %d nonz\n", r, QSget_colcount(lpi->prob),
      QSget_rowcount(lpi->prob), QSget_nzcount(lpi->prob));
 
   /* can only return dense result */
   if ( ninds != NULL )
      *ninds = -1;
 
   QS_CONDRET( QSget_binv_row(lpi->prob, r, coef) );
 
   for (i = 0; i < nrows; i++)
      coef[i] *= -1.0;
 
   return SCIP_OKAY;
}
 
/** get column of inverse basis matrix B^-1
 *
 *  @note The LP interface defines slack variables to have coefficient +1. This means that if, internally, the LP solver
 *        uses a -1 coefficient, then rows associated with slacks variables whose coefficient is -1, should be negated;
 *        see also the explanation in lpi.h.
 *
 *  @todo check that the result is in terms of the LP interface definition
 */
SCIP_RETCODE SCIPlpiGetBInvCol(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   c,                  /**< column number of B^-1; this is NOT the number of the column in the LP;
                                              *   you have to call SCIPlpiGetBasisInd() to get the array which links the
                                              *   B^-1 column numbers to the row and column numbers of the LP!
                                              *   c must be between 0 and nrows-1, since the basis has the size
                                              *   nrows * nrows */
   SCIP_Real*            coef,               /**< pointer to store the coefficients of the column */
   int*                  inds,               /**< array to store the non-zero indices, or NULL */
   int*                  ninds               /**< pointer to store the number of non-zero indices, or NULL
                                              *   (-1: if we do not store sparsity information) */
   )
{  /*lint --e{715} */
   assert(lpi!=NULL);
   assert(lpi->prob!=NULL);
   assert(coef != NULL);
   SCIP_UNUSED( c );
   SCIP_UNUSED( inds );
   SCIP_UNUSED( ninds );
 
   SCIPerrorMessage("SCIPlpiGetBInvCol() not supported by QSopt.\n");
 
   /* QSopt does not provide an interface for this yet */
   return SCIP_LPERROR;
}
 
/** get row of inverse basis matrix times constraint matrix B^-1 * A
 *
 *  @note The LP interface defines slack variables to have coefficient +1. This means that if, internally, the LP solver
 *        uses a -1 coefficient, then rows associated with slacks variables whose coefficient is -1, should be negated;
 *        see also the explanation in lpi.h.
 *
 *  @todo check that the result is in terms of the LP interface definition
 */
SCIP_RETCODE SCIPlpiGetBInvARow(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   r,                  /**< row number */
   const SCIP_Real*      binvrow,            /**< row in (A_B)^-1 from prior call to SCIPlpiGetBInvRow(), or NULL */
   SCIP_Real*            coef,               /**< vector to return coefficients of the row */
   int*                  inds,               /**< array to store the non-zero indices, or NULL */
   int*                  ninds               /**< pointer to store the number of non-zero indices, or NULL
                                              *   (-1: if we do not store sparsity information) */
   )
{  /*lint --e{715} */
   int ncols;
   int nrows;
   int i;
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(coef != NULL);
   SCIP_UNUSED( binvrow );
   SCIP_UNUSED( inds );
 
   SCIPdebugMessage("getting binva-row %d\n", r);
 
   /* can only return dense result */
   if ( ninds != NULL )
      *ninds = -1;
 
   ncols = QSget_colcount(lpi->prob);
   nrows = QSget_rowcount(lpi->prob);
 
   SCIP_CALL( ensureTabMem(lpi, nrows + ncols) );
 
   QS_CONDRET( QSget_tableau_row(lpi->prob, r, lpi->itab) );
 
   /* copy local information to the outside */
   BMScopyMemoryArray(coef, lpi->itab, ncols);
 
   for (i = 0; i < ncols; ++i)
      coef[i] *= -1.0;
 
   return SCIP_OKAY;
}
 
/** get column of inverse basis matrix times constraint matrix B^-1 * A
 *
 *  @note The LP interface defines slack variables to have coefficient +1. This means that if, internally, the LP solver
 *        uses a -1 coefficient, then rows associated with slacks variables whose coefficient is -1, should be negated;
 *        see also the explanation in lpi.h.
 *
 *  @todo check that the result is in terms of the LP interface definition
 */
SCIP_RETCODE SCIPlpiGetBInvACol(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   int                   c,                  /**< column number */
   SCIP_Real*            coef,               /**< vector to return coefficients of the column */
   int*                  inds,               /**< array to store the non-zero indices, or NULL */
   int*                  ninds               /**< pointer to store the number of non-zero indices, or NULL
                                              *   (-1: if we do not store sparsity information) */
   )
{  /*lint --e{715} */
   assert(lpi!=NULL);
   assert(lpi->prob!=NULL);
   assert(coef != NULL);
   assert(c >= 0);
   SCIP_UNUSED( inds );
   SCIP_UNUSED( ninds );
 
   SCIPerrorMessage("SCIPlpiGetBInvACol() not supported by QSopt.\n");
 
   /* QSopt does not provide an interface for this yet */
   return SCIP_LPERROR;
}
 
/**@} */
 
 
 
 
/*
 * LP State Methods
 */
 
/**@name LP State Methods */
/**@{ */
 
/** stores LPi state (like basis information) into lpistate object */
SCIP_RETCODE SCIPlpiGetState(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   BMS_BLKMEM*           blkmem,             /**< block memory */
   SCIP_LPISTATE**       lpistate            /**< pointer to LPi state information (like basis information) */
   )
{
   int ncols, nrows;
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(blkmem != NULL);
   assert(lpistate != NULL);
 
   ncols = QSget_colcount(lpi->prob);
   nrows = QSget_rowcount(lpi->prob);
 
   assert(ncols >= 0);
   assert(nrows >= 0);
 
   /* allocate lpistate data */
   SCIP_CALL( lpistateCreate(lpistate, blkmem, ncols, nrows));
   SCIPdebugMessage("storing QSopt LPI state in %p (%d cols, %d rows)\n", (void*)*lpistate, ncols, nrows);
 
   /* get unpacked basis information from QSopt */
   SCIP_CALL( ensureColMem(lpi, ncols) );
   SCIP_CALL( ensureRowMem(lpi, nrows) );
   SCIP_CALL( SCIPlpiGetBase(lpi, lpi->iccnt, lpi->ircnt) );
 
   /* pack LPi state data */
   (*lpistate)->ncols = ncols;
   (*lpistate)->nrows = nrows;
   lpistatePack(*lpistate, lpi->iccnt, lpi->ircnt);
 
   return SCIP_OKAY;
}
 
/** loads LPi state (like basis information) into solver; note that the LP might have been extended with additional
 *  columns and rows since the state was stored with SCIPlpiGetState()
 */
SCIP_RETCODE SCIPlpiSetState(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   BMS_BLKMEM*           blkmem,             /**< block memory */
   const SCIP_LPISTATE*  lpistate            /**< LPi state information (like basis information), or NULL */
   )
{  /*lint --e{715} */
   char* icstat;
   char* irstat;
   int i;
   int ncols;
   int nrows;
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(blkmem != NULL);
 
   /* if there was no basis information available, LPI state was not stored */
   if( lpistate == NULL )
      return SCIP_OKAY;
 
   /* continue test */
   ncols = QSget_colcount(lpi->prob);
   nrows = QSget_rowcount(lpi->prob);
 
   assert(ncols >= 0);
   assert(nrows >= 0);
   assert(lpistate->ncols <= ncols);
   assert(lpistate->nrows <= nrows);
 
   SCIPdebugMessage("loading LPI state %p (%d cols, %d rows) into QSopt LP with %d cols and %d rows\n", (void*)lpistate, lpistate->ncols,
      lpistate->nrows, ncols, nrows);
 
   if( lpistate->ncols == 0 || lpistate->nrows == 0 )
      return SCIP_OKAY;
 
   /* allocate enough memory for storing uncompressed basis information */
   SCIP_CALL( ensureColMem(lpi, ncols) );
   SCIP_CALL( ensureRowMem(lpi, nrows) );
   SCIP_CALL( ensureTabMem(lpi, nrows + ncols) );
 
   icstat = lpi->ibas;
   irstat = lpi->ibas + ncols;
 
   /* get senses */
   QS_CONDRET( QSget_senses(lpi->prob, lpi->isen) );
 
   /* unpack LPi state data */
   lpistateUnpack(lpistate, lpi->iccnt, lpi->ircnt);
 
   /* extend the basis to the current LP beyond the previously existing columns */
   for( i = lpistate->ncols; i < ncols; ++i )
   {
      SCIP_Real lb;
      SCIP_Real ub;
 
      /* get bounds from qsopt */
      QS_CONDRET( QSget_bounds_list(lpi->prob, 1, &i, &lb, &ub) );
      if ( SCIPlpiIsInfinity(lpi, REALABS(lb)) )
      {
         /* if lower bound is +/- infinity -> try upper bound */
         if ( SCIPlpiIsInfinity(lpi, REALABS(ub)) )
            lpi->iccnt[i] = (int) SCIP_BASESTAT_ZERO;  /* variable is free */
         else
            lpi->iccnt[i] = (int) SCIP_BASESTAT_UPPER; /* use finite upper bound */
      }
      else
         lpi->iccnt[i] = (int) SCIP_BASESTAT_LOWER;    /* use finite lower bound */
   }
   for( i = lpistate->nrows; i < nrows; ++i )  /*lint !e850*/
      lpi->ircnt[i] = (int) SCIP_BASESTAT_BASIC;
 
   /* convert the loaded basis into QSopt format */
   for( i = 0; i < nrows; ++i )
   {
      switch( lpi->ircnt[i] )
      {
      case SCIP_BASESTAT_LOWER:
         irstat[i] = QS_ROW_BSTAT_LOWER;
         break;
      case SCIP_BASESTAT_BASIC:
         irstat[i] = QS_ROW_BSTAT_BASIC;
         break;
      case SCIP_BASESTAT_UPPER:
         if ( lpi->isen[i] == 'L' )
            irstat[i] = QS_ROW_BSTAT_LOWER;
         else
            irstat[i] = QS_ROW_BSTAT_UPPER;
         break;
      default:
         SCIPerrorMessage("Unknown row basic status %d", lpi->ircnt[i]);
         SCIPABORT();
         return SCIP_INVALIDDATA; /*lint !e527*/
      }
   }
 
   for( i = 0; i < ncols; ++i )
   {
      switch( lpi->iccnt[i] )
      {
      case SCIP_BASESTAT_LOWER:
         icstat[i] = QS_COL_BSTAT_LOWER;
         break;
      case SCIP_BASESTAT_BASIC:
         icstat[i] = QS_COL_BSTAT_BASIC;
         break;
      case SCIP_BASESTAT_UPPER:
         icstat[i] = QS_COL_BSTAT_UPPER;
         break;
      case SCIP_BASESTAT_ZERO:
         icstat[i] = QS_COL_BSTAT_FREE;
         break;
      default:
         SCIPerrorMessage("Unknown column basic status %d", lpi->iccnt[i]);
         SCIPABORT();
         return SCIP_INVALIDDATA; /*lint !e527*/
      }
   }
 
   /* set the basis */
   QS_CONDRET( QSload_basis_array(lpi->prob, icstat, irstat) );
 
   return SCIP_OKAY;
}
 
/** clears current LPi state (like basis information) of the solver */
SCIP_RETCODE SCIPlpiClearState(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{
   int ncols;
   int nrows;
   int* cstat;
   int* rstat;
   int i;
 
   assert( lpi != NULL );
   assert( lpi->prob != NULL );
 
   SCIPdebugMessage("SCIPlpiClearState()\n");
 
   ncols = QSget_colcount(lpi->prob);
   nrows = QSget_rowcount(lpi->prob);
 
   if ( ncols == 0 || nrows == 0 )
      return SCIP_OKAY;
 
   SCIP_ALLOC( BMSallocMemoryArray(&cstat, ncols) );
   SCIP_ALLOC( BMSallocMemoryArray(&rstat, nrows) );
 
   for (i = 0; i < ncols; ++i)
      cstat[i] = (char) SCIP_BASESTAT_LOWER;
   for (i = 0; i < nrows; ++i)
      rstat[i] = (char) SCIP_BASESTAT_BASIC;
 
   SCIP_CALL( SCIPlpiSetBase(lpi, cstat, rstat) );
 
   BMSfreeMemoryArray(&cstat);
   BMSfreeMemoryArray(&rstat);
 
   return SCIP_OKAY;
}
 
/** frees LPi state information */
SCIP_RETCODE SCIPlpiFreeState(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   BMS_BLKMEM*           blkmem,             /**< block memory */
   SCIP_LPISTATE**       lpistate            /**< pointer to LPi state information (like basis information) */
   )
{
   assert(lpi != NULL);
   assert(lpistate != NULL);
   assert(blkmem != NULL);
 
   if( *lpistate != NULL )
      lpistateFree(lpistate, blkmem);
 
   return SCIP_OKAY;
}
 
/** checks whether the given LP state contains simplex basis information */
SCIP_Bool SCIPlpiHasStateBasis(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_LPISTATE*        lpistate            /**< LP state information (like basis information), or NULL */
   )
{  /*lint --e{715} */
   assert(lpi != NULL);
   return (lpistate != NULL);
}
 
/** reads LP state (like basis information from a file */
SCIP_RETCODE SCIPlpiReadState(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   const char*           fname               /**< file name */
   )
{
   int rval;
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(fname != NULL);
 
   SCIPdebugMessage("reading QSopt LP state from file <%s>\n", fname);
 
   rval = QSread_and_load_basis(lpi->prob, fname);
   if( rval )
   {
      SCIPerrorMessage("Error while loading basis from file <%s>.\n", fname);
      return SCIP_READERROR;
   }
 
   return SCIP_OKAY;
}
 
/** writes LPi state (i.e. basis information) to a file */
SCIP_RETCODE SCIPlpiWriteState(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   const char*           fname               /**< file name */
   )
{
   QSbas bas;
   int rval;
 
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(fname != NULL);
 
   SCIPdebugMessage("writing QSopt LP state to file <%s>\n", fname);
 
   bas = QSget_basis(lpi->prob);
   QS_ERROR(bas == 0, "Could not get basis from problem.");   /*lint !e820*/
   assert(bas);
 
   rval = QSwrite_basis(lpi->prob, bas, fname);
   QSfree(bas);
   if( rval )
   {
      SCIPerrorMessage("Could not write basis to file <%s>.\n", fname);
      return SCIP_WRITEERROR;
   }
 
   return SCIP_OKAY;
}
 
/**@} */
 
 
 
 
/*
 * LP Pricing Norms Methods
 */
 
/**@name LP Pricing Norms Methods */
/**@{ */
 
/** stores LPi pricing norms information
 *  @todo should we store norm information?
 */
SCIP_RETCODE SCIPlpiGetNorms(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   BMS_BLKMEM*           blkmem,             /**< block memory */
   SCIP_LPINORMS**       lpinorms            /**< pointer to LPi pricing norms information */
   )
{  /*lint --e{715} */
   int ncols;
   int nrows;
 
   assert( lpi != NULL );
   assert( lpi->prob != NULL );
   assert( lpinorms != NULL );
   assert( blkmem != NULL );
 
   ncols = QSget_colcount(lpi->prob);
   nrows = QSget_rowcount(lpi->prob);
 
   /* allocate lpinorms data */
   SCIP_ALLOC( BMSallocBlockMemory(blkmem, lpinorms) );
   (*lpinorms)->ncols = ncols;
   (*lpinorms)->nrows = nrows;
 
   if ( QStest_row_norms(lpi->prob) )
   {
      SCIP_ALLOC( BMSallocBlockMemoryArray(blkmem, &(*lpinorms)->cstat, ncols) );
      SCIP_ALLOC( BMSallocBlockMemoryArray(blkmem, &(*lpinorms)->rstat, nrows) );
      SCIP_ALLOC( BMSallocBlockMemoryArray(blkmem, &(*lpinorms)->norms, nrows) );
 
      QS_CONDRET( QSget_basis_and_row_norms_array(lpi->prob, (*lpinorms)->cstat, (*lpinorms)->rstat, (*lpinorms)->norms) );
   }
   else
   {
      (*lpinorms)->cstat = NULL;
      (*lpinorms)->rstat = NULL;
      (*lpinorms)->norms = NULL;
   }
 
   return SCIP_OKAY;
}
 
/** loads LPi pricing norms into solver; note that the LP might have been extended with additional
 *  columns and rows since the state was stored with SCIPlpiGetNorms()
 */
SCIP_RETCODE SCIPlpiSetNorms(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   BMS_BLKMEM*           blkmem,             /**< block memory */
   const SCIP_LPINORMS*  lpinorms            /**< LPi pricing norms information, or NULL */
   )
{  /*lint --e{715} */
   int ncols;
   int nrows;
 
   assert( lpi != NULL );
   assert( lpi->prob != NULL );
   SCIP_UNUSED( blkmem );
 
   if ( lpinorms->norms == NULL )
      return SCIP_OKAY;
 
   ncols = QSget_colcount(lpi->prob);
   nrows = QSget_rowcount(lpi->prob);
   if ( nrows != lpinorms->nrows || ncols != lpinorms->ncols )
      return SCIP_OKAY;
 
   /* load row norms */
   assert( lpinorms->cstat != NULL && lpinorms->rstat != NULL && lpinorms->norms != NULL );
   QS_CONDRET( QSload_basis_and_row_norms_array(lpi->prob, lpinorms->cstat, lpinorms->rstat, lpinorms->norms) );
 
   return SCIP_OKAY;
}
 
/** frees pricing norms information */
SCIP_RETCODE SCIPlpiFreeNorms(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   BMS_BLKMEM*           blkmem,             /**< block memory */
   SCIP_LPINORMS**       lpinorms            /**< pointer to LPi pricing norms information, or NULL */
   )
{  /*lint --e{715} */
   assert( lpinorms != NULL );
   assert( lpi != NULL );
 
   if ( (*lpinorms)->norms != NULL )
   {
      assert( (*lpinorms)->cstat != NULL && (*lpinorms)->rstat != NULL );
      BMSfreeBlockMemoryArray(blkmem, &(*lpinorms)->norms, (*lpinorms)->nrows);
      BMSfreeBlockMemoryArray(blkmem, &(*lpinorms)->rstat, (*lpinorms)->nrows);
      BMSfreeBlockMemoryArray(blkmem, &(*lpinorms)->cstat, (*lpinorms)->ncols);
   }
   BMSfreeBlockMemory(blkmem, lpinorms);
 
   return SCIP_OKAY;
}
 
/**@} */
 
 
 
 
/*
 * Parameter Methods
 */
 
/**@name Parameter Methods */
/**@{ */
 
/** gets integer parameter of LP */
SCIP_RETCODE SCIPlpiGetIntpar(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_LPPARAM          type,               /**< parameter number */
   int*                  ival                /**< buffer to store the parameter value */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(ival != NULL);
 
   SCIPdebugMessage("getting int parameter %d\n", type);
 
   switch( type )
   {
   case SCIP_LPPAR_FROMSCRATCH:
   case SCIP_LPPAR_FASTMIP:
   case SCIP_LPPAR_PRESOLVING:
      return SCIP_PARAMETERUNKNOWN;
   case SCIP_LPPAR_SCALING:
      QS_CONDRET( QSget_param(lpi->prob, QS_PARAM_SIMPLEX_SCALING, ival) );
      assert((*ival) == 0 || (*ival) == 1);
 
      break;
   case SCIP_LPPAR_PRICING:
      *ival = lpi->pricing;
      break;
   case SCIP_LPPAR_LPINFO:
      QS_CONDRET( QSget_param(lpi->prob, QS_PARAM_SIMPLEX_DISPLAY, ival) );
      if( *ival )
         *ival = TRUE;
      else
         *ival = FALSE;
      break;
   case SCIP_LPPAR_LPITLIM:
      QS_CONDRET( QSget_param(lpi->prob, QS_PARAM_SIMPLEX_MAX_ITERATIONS, ival) );
      break;
   default:
      return SCIP_PARAMETERUNKNOWN;
   }  /*lint !e788*/
 
   return SCIP_OKAY;
}
 
/** sets integer parameter of LP */
SCIP_RETCODE SCIPlpiSetIntpar(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_LPPARAM          type,               /**< parameter number */
   int                   ival                /**< parameter value */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
 
   SCIPdebugMessage("setting int parameter %d to %d\n", type, ival);
 
   switch( type )
   {
   case SCIP_LPPAR_SCALING:
      if( ival == 0 )
         QS_CONDRET( QSset_param(lpi->prob, QS_PARAM_SIMPLEX_SCALING, 0) );
      else
         QS_CONDRET( QSset_param(lpi->prob, QS_PARAM_SIMPLEX_SCALING, 1) );
      break;
   case SCIP_LPPAR_PRICING:
      lpi->pricing = ival;
      switch( ival )
      {
      case SCIP_PRICING_AUTO:
      case SCIP_PRICING_LPIDEFAULT:
      case SCIP_PRICING_FULL:
      case SCIP_PRICING_STEEP:
      case SCIP_PRICING_STEEPQSTART:
         QS_CONDRET( QSset_param(lpi->prob, QS_PARAM_PRIMAL_PRICING, QS_PRICE_PSTEEP) );
         QS_CONDRET( QSset_param(lpi->prob, QS_PARAM_DUAL_PRICING, QS_PRICE_DSTEEP) );
         break;
      case SCIP_PRICING_PARTIAL:
         QS_CONDRET( QSset_param(lpi->prob,QS_PARAM_PRIMAL_PRICING,QS_PRICE_PMULTPARTIAL) );
         QS_CONDRET( QSset_param(lpi->prob,QS_PARAM_DUAL_PRICING,QS_PRICE_DMULTPARTIAL) );
         break;
      case SCIP_PRICING_DEVEX:
         QS_CONDRET( QSset_param(lpi->prob,QS_PARAM_PRIMAL_PRICING,QS_PRICE_PDEVEX) );
         QS_CONDRET( QSset_param(lpi->prob,QS_PARAM_DUAL_PRICING,QS_PRICE_DDEVEX) );
         break;
      default:
         return SCIP_LPERROR;
      }
      break;
   case SCIP_LPPAR_LPINFO:
      if( ival )
         QS_CONDRET( QSset_param(lpi->prob, QS_PARAM_SIMPLEX_DISPLAY, 1) );
      else
         QS_CONDRET( QSset_param(lpi->prob, QS_PARAM_SIMPLEX_DISPLAY, 0) );
      break;
   case SCIP_LPPAR_LPITLIM:
      /* The maximum number of pivots allowed in the algorithm can be set with the QS_PARAM_SIMPLEX_MAX_ITERATIONS parameter.
       * ival can be any positive integer, 0 stopping immediately */
      assert( ival >= 0 );
      QS_CONDRET( QSset_param(lpi->prob, QS_PARAM_SIMPLEX_MAX_ITERATIONS, ival) );
      break;
   default:
      return SCIP_PARAMETERUNKNOWN;
   }  /*lint !e788*/
 
   return SCIP_OKAY;
}
 
/** gets floating point parameter of LP */
SCIP_RETCODE SCIPlpiGetRealpar(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_LPPARAM          type,               /**< parameter number */
   SCIP_Real*            dval                /**< buffer to store the parameter value */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(dval != NULL);
 
   SCIPdebugMessage("getting real parameter %d\n", type);
 
   switch( type )
   {
   case SCIP_LPPAR_OBJLIM:
   {
      int sense;
      QS_CONDRET( QSget_objsense(lpi->prob, &sense) );
      if ( sense == QS_MIN )
      {
         QS_CONDRET( QSget_param_double(lpi->prob, QS_PARAM_OBJULIM, dval) );
      }
      else
      {
         QS_CONDRET( QSget_param_double(lpi->prob, QS_PARAM_OBJLLIM, dval) );
      }
      break;
   }
   case SCIP_LPPAR_LPTILIM:
      QS_CONDRET( QSget_param_double(lpi->prob, QS_PARAM_SIMPLEX_MAX_TIME, dval) );
      break;
   default:
   case SCIP_LPPAR_MARKOWITZ:
   case SCIP_LPPAR_BARRIERCONVTOL:
   case SCIP_LPPAR_DUALFEASTOL:
   case SCIP_LPPAR_FEASTOL:
      return SCIP_PARAMETERUNKNOWN;
   }  /*lint !e788*/
 
   return SCIP_OKAY;
}
 
/** sets floating point parameter of LP */
SCIP_RETCODE SCIPlpiSetRealpar(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_LPPARAM          type,               /**< parameter number */
   SCIP_Real             dval                /**< parameter value */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
 
   SCIPdebugMessage("setting real parameter %d to %g\n", type, dval);
 
   switch( type )
   {
   case SCIP_LPPAR_LPTILIM:
      assert( dval > 0.0 );
 
      /* qso requires dval >= 0
       *
       * However for consistency we assert the timelimit to be strictly positive.
       */
      QS_CONDRET( QSset_param_double(lpi->prob, QS_PARAM_SIMPLEX_MAX_TIME, dval) );
      break;
   case SCIP_LPPAR_OBJLIM:
   {
      int sense;
      QS_CONDRET( QSget_objsense(lpi->prob, &sense) );
      if ( sense == QS_MIN )
      {
         QS_CONDRET( QSset_param_double(lpi->prob, QS_PARAM_OBJULIM, dval) );
      }
      else
      {
         QS_CONDRET( QSset_param_double(lpi->prob, QS_PARAM_OBJLLIM, dval) );
      }
      break;
   }
   case SCIP_LPPAR_FEASTOL:
   case SCIP_LPPAR_DUALFEASTOL:
   case SCIP_LPPAR_BARRIERCONVTOL:
   case SCIP_LPPAR_MARKOWITZ:
   default:
      return SCIP_PARAMETERUNKNOWN;
   }  /*lint !e788*/
 
   return SCIP_OKAY;
}
 
/** interrupts the currently ongoing lp solve or disables the interrupt */
SCIP_RETCODE SCIPlpiInterrupt(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_Bool             interrupt           /**< TRUE if interrupt should be set, FALSE if it should be disabled */
   )
{
   /*lint --e{715}*/
   assert(lpi != NULL);
 
   return SCIP_OKAY;
}
 
/**@} */
 
 
 
 
/*
 * Numerical Methods
 */
 
/**@name Numerical Methods */
/**@{ */
 
/** returns value treated as infinity in the LP solver */
SCIP_Real SCIPlpiInfinity(
   SCIP_LPI*             lpi                 /**< LP interface structure */
   )
{  /*lint --e{715} */
   assert(lpi != NULL);
   return QS_MAXDOUBLE;
}
 
/** checks if given value is treated as infinity in the LP solver */
SCIP_Bool SCIPlpiIsInfinity(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   SCIP_Real             val                 /**< value to be checked for infinity */
   )
{  /*lint --e{715} */
   assert(lpi != NULL);
   return (val >= QS_MAXDOUBLE);
}
 
/**@} */
 
 
 
 
/*
 * File Interface Methods
 */
 
/**@name File Interface Methods */
/**@{ */
 
/** reads LP from a file */
SCIP_RETCODE SCIPlpiReadLP(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   const char*           fname               /**< file name */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(fname != NULL);
 
   SCIPdebugMessage("reading LP from file <%s>\n", fname);
 
   if( lpi->prob != NULL )
      QSfree_prob(lpi->prob);
 
   lpi->solstat = 0;
   lpi->previt = 0;
 
   lpi->prob = QSread_prob(fname, "LP");
   if( lpi->prob == 0 )
      return SCIP_READERROR;
 
   return SCIP_OKAY;
}
 
/** writes LP to a file */
SCIP_RETCODE SCIPlpiWriteLP(
   SCIP_LPI*             lpi,                /**< LP interface structure */
   const char*           fname               /**< file name */
   )
{
   assert(lpi != NULL);
   assert(lpi->prob != NULL);
   assert(fname != NULL);
 
   SCIPdebugMessage("writing LP to file <%s>\n", fname);
 
   if( QSwrite_prob (lpi->prob, fname, "LP") )
      return SCIP_WRITEERROR;
 
   return SCIP_OKAY;
}
 
/**@} */