Detailed Description

pseudo-Boolean file reader (opb format)

Author: Stefan Heinz; Michael Winkler

This file reader parses the opb format and is also used by the wbo reader for the wbo format. For a detailed description of this format see

The syntax of the input file format can be described by a simple Backus-Naur form. <formula> is the start symbol of this grammar.

<sequence_of_comments>::= <comment> [<sequence_of_comments>] <comment>::= "*" <any_sequence_of_characters_other_than_EOL> <EOL> <sequence_of_comments_or_constraints>::=<comment_or_constraint> [<sequence_of_comments_or_constraints>] <comment_or_constraint>::=<comment>|<constraint>

<objective>::= "min:" <zeroOrMoreSpace> <sum> ";" <constraint>::= <sum> <relational_operator> <zeroOrMoreSpace> <integer> <zeroOrMoreSpace> ";"

<relational_operator>::= "\>=" | "="

<oneOrMoreSpace>::= " " [<oneOrMoreSpace>] <zeroOrMoreSpace>::= [" " <zeroOrMoreSpace>]

For linear pseudo-Boolean instances, <term> is defined as

For non-linear instances, <term> is defined as

For wbo-files are the following additional/changed things possible.

<softheader>::= "soft:" [<unsigned integer>] ";"

<comment_or_constraint>::=<comment>|<constraint>|<softconstraint>

Definition in file reader_opb.c.

#include "blockmemshell/memory.h"
#include <ctype.h>
#include "scip/cons_and.h"
#include "scip/cons_indicator.h"
#include "scip/cons_knapsack.h"
#include "scip/cons_linear.h"
#include "scip/cons_logicor.h"
#include "scip/cons_pseudoboolean.h"
#include "scip/cons_setppc.h"
#include "scip/cons_varbound.h"
#include "scip/debug.h"
#include "scip/pub_cons.h"
#include "scip/pub_fileio.h"
#include "scip/pub_message.h"
#include "scip/pub_misc.h"
#include "scip/pub_misc_sort.h"
#include "scip/pub_reader.h"
#include "scip/pub_var.h"
#include "scip/reader_opb.h"
#include "scip/scip_cons.h"
#include "scip/scip_mem.h"
#include "scip/scip_message.h"
#include "scip/scip_numerics.h"
#include "scip/scip_param.h"
#include "scip/scip_prob.h"
#include "scip/scip_reader.h"
#include "scip/scip_solvingstats.h"
#include "scip/scip_var.h"
#include <stdlib.h>
#include <string.h>
#include <strings.h>

Go to the source code of this file.

Macros
#define	READER_NAME "opbreader"

#define	READER_DESC "file reader for pseudo-Boolean problem in opb format"

#define	READER_EXTENSION "opb"

#define	GENCONSNAMES TRUE /* remove if no constraint names should be generated */

#define	LINEAROBJECTIVE

#define	INDICATORVARNAME "indicatorvar" /* standard part of name for all indicator variables */

#define	INDICATORSLACKVARNAME "indslack" /* standard part of name for all indicator slack variables; should be the same in cons_indicator */

#define	TOPCOSTCONSNAME "topcostcons" /* standard name for artificial topcost constraint in wbo problems */

#define	OPB_MAX_LINELEN 65536

#define	OPB_MAX_PUSHEDTOKENS 2

#define	OPB_INIT_COEFSSIZE 8192

Typedefs
typedef enum OpbExpType	OPBEXPTYPE

typedef enum OpbSense	OPBSENSE

typedef struct OpbInput	OPBINPUT

Enumerations
enum	OpbExpType { OPB_EXP_NONE, OPB_EXP_UNSIGNED, OPB_EXP_SIGNED }

enum	OpbSense { OPB_SENSE_NOTHING, OPB_SENSE_LE, OPB_SENSE_GE, OPB_SENSE_EQ }

Functions
static void	syntaxError (SCIP scip, OPBINPUT opbinput, const char *msg)

static SCIP_Bool	hasError (OPBINPUT *opbinput)

static SCIP_Bool	isDelimChar (char c)

static SCIP_Bool	isTokenChar (char c)

static SCIP_Bool	isValueChar (char c, char nextc, SCIP_Bool firstchar, SCIP_Bool hasdot, OPBEXPTYPE exptype)

static SCIP_Bool	getNextLine (SCIP scip, OPBINPUT opbinput)

static void	swapPointers (char pointer1, char pointer2)

static SCIP_Bool	getNextToken (SCIP scip, OPBINPUT opbinput)

static void	pushToken (OPBINPUT *opbinput)

static void	pushBufferToken (OPBINPUT *opbinput)

static void	swapTokenBuffer (OPBINPUT *opbinput)

static SCIP_Bool	isEndLine (OPBINPUT *opbinput)

static SCIP_Bool	isSign (OPBINPUT opbinput, int sign)

static SCIP_Bool	isValue (SCIP scip, OPBINPUT opbinput, SCIP_Real *value)

static SCIP_Bool	isSense (OPBINPUT opbinput, OPBSENSE sense)

static SCIP_Bool	isStartingSoftConstraintWeight (SCIP scip, OPBINPUT opbinput)

static SCIP_Bool	isEndingSoftConstraintWeight (SCIP scip, OPBINPUT opbinput)

static SCIP_RETCODE	createVariable (SCIP scip, SCIP_VAR var, char name)

static SCIP_RETCODE	getVariableOrTerm (SCIP scip, OPBINPUT opbinput, SCIP_VAR **vars, int nvars, int *varssize)

static SCIP_RETCODE	readCoefficients (SCIP const scip, OPBINPUT const opbinput, char const name, SCIP_VAR linvars, SCIP_Real lincoefs, int const nlincoefs, SCIP_VAR *terms, SCIP_Real termcoefs, int *ntermvars, int const ntermcoefs, SCIP_Bool const newsection, SCIP_Bool const isNonlinear, SCIP_Bool const issoftcons, SCIP_Real const weight)

static SCIP_RETCODE	setObjective (SCIP const scip, OPBINPUT const opbinput, const char sense, SCIP_Real const scale, SCIP_VAR const linvars, SCIP_Real const coefs, int const ncoefs, SCIP_VAR **const terms, SCIP_Real const termcoefs, int *const ntermvars, int const ntermcoefs)

static SCIP_RETCODE	readConstraints (SCIP scip, OPBINPUT opbinput, SCIP_Real objscale, int *nNonlinearConss)

static SCIP_RETCODE	getMaxAndConsDim (SCIP scip, OPBINPUT opbinput, SCIP_Real objscale, SCIP_Real objoffset)

static SCIP_RETCODE	readOPBFile (SCIP scip, OPBINPUT opbinput, const char *filename)

static SCIP_RETCODE	getBinVarsRepresentatives (SCIP const scip, SCIP_VAR *const vars, int const nvars, SCIP_Bool const transformed)

static SCIP_RETCODE	getActiveVariables (SCIP scip, SCIP_VAR vars, SCIP_Real scalars, int nvars, SCIP_Real constant, SCIP_Bool transformed)

static SCIP_RETCODE	computeAndConstraintInfos (SCIP const scip, SCIP_Bool const transformed, SCIP_VAR *resvars, int nresvars, SCIP_VAR **andvars, int nandvars, SCIP_Bool const existandconshdlr, SCIP_Bool const existands)

static void	clearBuffer (char linebuffer, int linecnt)

static void	writeBuffer (SCIP scip, FILE file, char linebuffer, int linecnt)

static void	appendBuffer (SCIP scip, FILE file, char linebuffer, int linecnt, const char *extension)

static SCIP_RETCODE	writeOpbObjective (SCIP const scip, FILE const file, SCIP_VAR const vars, int const nvars, SCIP_VAR const resvars, int const nresvars, SCIP_VAR *const const andvars, int const const nandvars, SCIP_OBJSENSE const objsense, SCIP_Real const objscale, SCIP_Real const objoffset, char const const multisymbol, SCIP_Bool const existands, SCIP_Bool const transformed)

static SCIP_RETCODE	printNLRow (SCIP const scip, FILE const file, char const const type, SCIP_VAR const vars, SCIP_Real const const vals, int const nvars, SCIP_Real lhs, SCIP_VAR const resvars, int const nresvars, SCIP_VAR const const andvars, int const const nandvars, SCIP_Longint weight, SCIP_Longint const mult, char const const multisymbol)

static SCIP_RETCODE	printNonLinearCons (SCIP const scip, FILE const file, SCIP_VAR *const vars, SCIP_Real const vals, int const nvars, SCIP_Real const lhs, SCIP_Real const rhs, SCIP_VAR const resvars, int const nresvars, SCIP_VAR const const andvars, int const const nandvars, SCIP_Longint weight, SCIP_Bool const transformed, char const *const multisymbol)

static SCIP_RETCODE	printRow (SCIP scip, FILE file, const char type, SCIP_VAR vars, SCIP_Real vals, int nvars, SCIP_Real lhs, SCIP_Longint weight, SCIP_Longint mult, const char multisymbol)

static SCIP_RETCODE	printLinearCons (SCIP scip, FILE file, SCIP_VAR *vars, SCIP_Real vals, int nvars, SCIP_Real lhs, SCIP_Real rhs, SCIP_Longint weight, SCIP_Bool transformed, const char *multisymbol)

static SCIP_RETCODE	printPBRow (SCIP const scip, FILE const file, const char type, SCIP_VAR const linvars, SCIP_Real const linvals, int const nlinvars, SCIP_VAR **const termvars, int const ntermvars, SCIP_Real const termvals, int const ntermvals, SCIP_Bool const negatedarrays, SCIP_VAR const indvar, SCIP_Real lhs, SCIP_Longint mult, const char multisymbol)

static SCIP_RETCODE	printPseudobooleanCons (SCIP const scip, FILE const file, SCIP_VAR *const linvars, SCIP_Real const linvals, int const nlinvars, SCIP_VAR **const termvars, int const ntermvars, SCIP_Real const termvals, int const ntermvals, SCIP_VAR const indvar, SCIP_Real const lhs, SCIP_Real const rhs, SCIP_Bool transformed, const char *multisymbol)

static void	determineTotalNumberLinearConss (SCIP const scip, SCIP_CONS const conss, int const nconss, int nlinearconss, int *nsplitlinearconss)

static SCIP_RETCODE	writeOpbConstraints (SCIP const scip, FILE const file, SCIP_CONS const conss, int const nconss, SCIP_VAR const vars, int const nvars, SCIP_VAR const resvars, int const nresvars, SCIP_VAR const const andvars, int const const nandvars, char const *const multisymbol, SCIP_Bool const existandconshdlr, SCIP_Bool const existands, SCIP_Bool const transformed)

static SCIP_RETCODE	writeOpbFixedVars (SCIP const scip, FILE const file, SCIP_VAR *vars, int nvars, SCIP_HASHTABLE const printedfixing, char const *const multisymbol, SCIP_Bool const transformed)

static SCIP_RETCODE	writeOpbRelevantAnds (SCIP const scip, FILE const file, SCIP_VAR const resvars, int const nresvars, SCIP_VAR const const andvars, int const const nandvars, SCIP_HASHTABLE const printedfixing, char const const multisymbol, SCIP_Bool const transformed)

static SCIP_RETCODE	writeOpb (SCIP scip, FILE file, const char name, SCIP_Bool transformed, SCIP_OBJSENSE objsense, SCIP_Real objscale, SCIP_Real objoffset, SCIP_VAR vars, int nvars, SCIP_CONS conss, int nconss, SCIP_VAR const resvars, int const nresvars, SCIP_VAR const const andvars, int const const nandvars, SCIP_Bool const existandconshdlr, SCIP_Bool const existands, SCIP_RESULT result)

SCIP_RETCODE	SCIPreadOpb (SCIP scip, SCIP_READER reader, const char filename, SCIP_RESULT result)

SCIP_RETCODE	SCIPwriteOpb (SCIP scip, FILE file, const char name, SCIP_Bool transformed, SCIP_OBJSENSE objsense, SCIP_Real objscale, SCIP_Real objoffset, SCIP_VAR vars, int nvars, int nbinvars, int nintvars, int nimplvars, int ncontvars, SCIP_VAR fixedvars, int nfixedvars, SCIP_CONS conss, int nconss, SCIP_Bool genericnames, SCIP_RESULT result)

static	SCIP_DECL_READERCOPY (readerCopyOpb)

static	SCIP_DECL_READERREAD (readerReadOpb)

static	SCIP_DECL_READERWRITE (readerWriteOpb)

SCIP_RETCODE	SCIPincludeReaderOpb (SCIP *scip)

Variables
static const char	commentchars [] = "*"

Macro Definition Documentation

◆ READER_NAME

#define READER_NAME "opbreader"

Definition at line 125 of file reader_opb.c.

Referenced by readConstraints(), SCIP_DECL_READERCOPY(), SCIPincludeReaderOpb(), and writeOpb().

◆ READER_DESC

#define READER_DESC "file reader for pseudo-Boolean problem in opb format"

Definition at line 126 of file reader_opb.c.

Referenced by SCIPincludeReaderOpb().

◆ READER_EXTENSION

#define READER_EXTENSION "opb"

Definition at line 127 of file reader_opb.c.

Referenced by SCIPincludeReaderOpb().

◆ GENCONSNAMES

#define GENCONSNAMES TRUE /* remove if no constraint names should be generated */

Definition at line 129 of file reader_opb.c.

◆ LINEAROBJECTIVE

#define LINEAROBJECTIVE

Value:

TRUE  /* will all non-linear parts inside the objective function be linearized or will
                                       * an artificial integer variable be created which will represent the objective
                                       * function
                                       */

Definition at line 130 of file reader_opb.c.

◆ INDICATORVARNAME

#define INDICATORVARNAME "indicatorvar" /* standard part of name for all indicator variables */

Definition at line 135 of file reader_opb.c.

Referenced by printPBRow(), printRow(), readConstraints(), SCIPwriteOpb(), and writeOpbObjective().

◆ INDICATORSLACKVARNAME

#define INDICATORSLACKVARNAME "indslack" /* standard part of name for all indicator slack variables; should be the same in cons_indicator */

Definition at line 136 of file reader_opb.c.

Referenced by SCIPwriteOpb().

◆ TOPCOSTCONSNAME

#define TOPCOSTCONSNAME "topcostcons" /* standard name for artificial topcost constraint in wbo problems */

Definition at line 137 of file reader_opb.c.

Referenced by readOPBFile(), and writeOpbObjective().

◆ OPB_MAX_LINELEN

#define OPB_MAX_LINELEN 65536

size of the line buffer for reading or writing

Definition at line 142 of file reader_opb.c.

Referenced by appendBuffer(), getNextToken(), printNLRow(), printPBRow(), printRow(), readConstraints(), SCIPreadOpb(), writeBuffer(), writeOpb(), writeOpbFixedVars(), writeOpbObjective(), and writeOpbRelevantAnds().

◆ OPB_MAX_PUSHEDTOKENS

#define OPB_MAX_PUSHEDTOKENS 2

Definition at line 143 of file reader_opb.c.

Referenced by pushBufferToken(), pushToken(), and SCIPreadOpb().

◆ OPB_INIT_COEFSSIZE

#define OPB_INIT_COEFSSIZE 8192

Definition at line 144 of file reader_opb.c.

Referenced by readCoefficients().

Typedef Documentation

◆ OPBEXPTYPE

typedef enum OpbExpType OPBEXPTYPE

Definition at line 153 of file reader_opb.c.

◆ OPBSENSE

typedef enum OpbSense OPBSENSE

Definition at line 162 of file reader_opb.c.

◆ OPBINPUT

typedef struct OpbInput OPBINPUT

Definition at line 188 of file reader_opb.c.

Enumeration Type Documentation

◆ OpbExpType

enum OpbExpType

Section in OPB File

Enumerator
OPB_EXP_NONE
OPB_EXP_UNSIGNED
OPB_EXP_SIGNED

Definition at line 147 of file reader_opb.c.

◆ OpbSense

enum OpbSense

Enumerator
OPB_SENSE_NOTHING
OPB_SENSE_LE
OPB_SENSE_GE
OPB_SENSE_EQ

Definition at line 155 of file reader_opb.c.

Function Documentation

◆ syntaxError()

static void syntaxError	(	SCIP *	scip,
		OPBINPUT *	opbinput,
		const char *	msg
	)

static

issues an error message and marks the OPB data to have errors

Parameters

scip	SCIP data structure
opbinput	OPB reading data
msg	error message

Definition at line 197 of file reader_opb.c.

References NULL, SCIPerrorMessage, and TRUE.

Referenced by getVariableOrTerm(), readCoefficients(), and readConstraints().

◆ hasError()

static SCIP_Bool hasError ( OPBINPUT * opbinput )

static

returns whether a syntax error was detected

Parameters

opbinput OPB reading data

Definition at line 221 of file reader_opb.c.

References NULL.

Referenced by readCoefficients(), readConstraints(), readOPBFile(), and setObjective().

◆ isDelimChar()

static SCIP_Bool isDelimChar ( char c )

static

returns whether the given character is a token delimiter

Parameters

c	input character

Definition at line 232 of file reader_opb.c.

References FALSE, and TRUE.

Referenced by getNextToken().

◆ isTokenChar()

static SCIP_Bool isTokenChar ( char c )

static

returns whether the given character is a single token

Parameters

c	input character

Definition at line 253 of file reader_opb.c.

References FALSE, and TRUE.

Referenced by getNextToken(), and getVariableOrTerm().

◆ isValueChar()

static SCIP_Bool isValueChar	(	char	c,
		char	nextc,
		SCIP_Bool	firstchar,
		SCIP_Bool *	hasdot,
		OPBEXPTYPE *	exptype
	)

static

returns whether the current character is member of a value string

Parameters

c	input character
nextc	next input character
firstchar	is the given character the first char of the token?
hasdot	pointer to update the dot flag
exptype	pointer to update the exponent type

Definition at line 276 of file reader_opb.c.

References FALSE, NULL, OPB_EXP_NONE, OPB_EXP_SIGNED, OPB_EXP_UNSIGNED, and TRUE.

Referenced by getNextToken().

◆ getNextLine()

static SCIP_Bool getNextLine	(	SCIP *	scip,
		OPBINPUT *	opbinput
	)

static

reads the next line from the input file into the line buffer; skips comments; returns whether a line could be read

Parameters

scip	SCIP data structure
opbinput	OPB reading data

Definition at line 320 of file reader_opb.c.

References commentchars, FALSE, NULL, SCIP_CALL_ABORT, SCIPcalcMemGrowSize(), SCIPdebugMsg, SCIPfgets(), SCIPreallocBlockMemoryArray, and TRUE.

Referenced by getNextToken().

◆ swapPointers()

static void swapPointers	(	char **	pointer1,
		char **	pointer2
	)

static

swaps the addresses of two pointers

Parameters

pointer1	first pointer
pointer2	second pointer

Definition at line 375 of file reader_opb.c.

Referenced by getNextToken(), pushBufferToken(), pushToken(), and swapTokenBuffer().

◆ getNextToken()

static SCIP_Bool getNextToken	(	SCIP *	scip,
		OPBINPUT *	opbinput
	)

static

reads the next token from the input file into the token buffer; returns whether a token was read

Parameters

scip	SCIP data structure
opbinput	OPB reading data

Definition at line 389 of file reader_opb.c.

References FALSE, getNextLine(), isDelimChar(), isTokenChar(), isValueChar(), NULL, OPB_EXP_NONE, OPB_MAX_LINELEN, SCIP_Bool, SCIPdebugMsg, swapPointers(), and TRUE.

Referenced by getVariableOrTerm(), readCoefficients(), and readConstraints().

◆ pushToken()

static void pushToken ( OPBINPUT * opbinput )

static

puts the current token on the token stack, such that it is read at the next call to getNextToken()

Parameters

opbinput OPB reading data

Definition at line 490 of file reader_opb.c.

References NULL, OPB_MAX_PUSHEDTOKENS, and swapPointers().

Referenced by getVariableOrTerm(), and readCoefficients().

◆ pushBufferToken()

static void pushBufferToken ( OPBINPUT * opbinput )

static

puts the buffered token on the token stack, such that it is read at the next call to getNextToken()

Parameters

opbinput OPB reading data

Definition at line 503 of file reader_opb.c.

References NULL, OPB_MAX_PUSHEDTOKENS, and swapPointers().

Referenced by readCoefficients().

◆ swapTokenBuffer()

static void swapTokenBuffer ( OPBINPUT * opbinput )

static

swaps the current token with the token buffer

Parameters

opbinput OPB reading data

Definition at line 516 of file reader_opb.c.

References NULL, and swapPointers().

Referenced by readCoefficients().

◆ isEndLine()

static SCIP_Bool isEndLine ( OPBINPUT * opbinput )

static

checks whether the current token is a section identifier, and if yes, switches to the corresponding section

Parameters

opbinput OPB reading data

Definition at line 527 of file reader_opb.c.

References FALSE, NULL, and TRUE.

Referenced by readCoefficients(), readConstraints(), and setObjective().

◆ isSign()

static SCIP_Bool isSign	(	OPBINPUT *	opbinput,
		int *	sign
	)

static

returns whether the current token is a sign

Parameters

opbinput	OPB reading data
sign	pointer to update the sign

Definition at line 541 of file reader_opb.c.

References FALSE, NULL, and TRUE.

Referenced by readCoefficients(), and readConstraints().

◆ isValue()

static SCIP_Bool isValue	(	SCIP *	scip,
		OPBINPUT *	opbinput,
		SCIP_Real *	value
	)

static

returns whether the current token is a value

Parameters

scip	SCIP data structure
opbinput	OPB reading data
value	pointer to store the value (unchanged, if token is no value)

Definition at line 568 of file reader_opb.c.

References FALSE, NULL, SCIPinfinity(), and TRUE.

Referenced by readCoefficients(), and readConstraints().

◆ isSense()

static SCIP_Bool isSense	(	OPBINPUT *	opbinput,
		OPBSENSE *	sense
	)

static

returns whether the current token is an equation sense

Parameters

opbinput	OPB reading data
sense	pointer to store the equation sense, or NULL

Definition at line 602 of file reader_opb.c.

References FALSE, NULL, OPB_SENSE_EQ, OPB_SENSE_GE, OPB_SENSE_LE, and TRUE.

Referenced by readCoefficients(), and readConstraints().

◆ isStartingSoftConstraintWeight()

static SCIP_Bool isStartingSoftConstraintWeight	(	SCIP *	scip,
		OPBINPUT *	opbinput
	)

static

returns whether the current token is a value

Parameters

scip	SCIP data structure
opbinput	OPB reading data

Definition at line 633 of file reader_opb.c.

References FALSE, NULL, and TRUE.

Referenced by readCoefficients().

◆ isEndingSoftConstraintWeight()

static SCIP_Bool isEndingSoftConstraintWeight	(	SCIP *	scip,
		OPBINPUT *	opbinput
	)

static

returns whether the current token is a value

Parameters

scip	SCIP data structure
opbinput	OPB reading data

Definition at line 649 of file reader_opb.c.

References FALSE, NULL, and TRUE.

Referenced by readCoefficients().

◆ createVariable()

static SCIP_RETCODE createVariable	(	SCIP *	scip,
		SCIP_VAR **	var,
		char *	name
	)

static

create binary variable with given name

Parameters

scip	SCIP data structure
var	pointer to store the variable
name	name for the variable

Definition at line 665 of file reader_opb.c.

References NULL, SCIP_Bool, SCIP_CALL, SCIP_OKAY, SCIP_VARTYPE_BINARY, SCIPaddVar(), SCIPcreateVar(), SCIPdebugMsg, SCIPgetBoolParam(), and SCIPreleaseVar().

Referenced by getVariableOrTerm(), and readConstraints().

◆ getVariableOrTerm()

static SCIP_RETCODE getVariableOrTerm	(	SCIP *	scip,
		OPBINPUT *	opbinput,
		SCIP_VAR ***	vars,
		int *	nvars,
		int *	varssize
	)

static

returns the variable with the given name, or creates a new variable if it does not exist

Parameters

scip	SCIP data structure
opbinput	OPB reading data
vars	pointer to store the variables
nvars	pointer to store the number of variables
varssize	pointer to store the varsize, if changed (should already be initialized)

Definition at line 697 of file reader_opb.c.

References createVariable(), FALSE, getNextToken(), isTokenChar(), NULL, pushToken(), SCIP_Bool, SCIP_CALL, SCIP_OKAY, SCIPcalcMemGrowSize(), SCIPfindVar(), SCIPgetNegatedVar(), SCIPreallocBufferArray, syntaxError(), and TRUE.

Referenced by readCoefficients().

◆ readCoefficients()

static SCIP_RETCODE readCoefficients	(	SCIP *const	scip,
		OPBINPUT *const	opbinput,
		char *const	name,
		SCIP_VAR ***	linvars,
		SCIP_Real **	lincoefs,
		int *const	nlincoefs,
		SCIP_VAR ****	terms,
		SCIP_Real **	termcoefs,
		int **	ntermvars,
		int *const	ntermcoefs,
		SCIP_Bool *const	newsection,
		SCIP_Bool *const	isNonlinear,
		SCIP_Bool *const	issoftcons,
		SCIP_Real *const	weight
	)

static

reads an objective or constraint with name and coefficients

Parameters

scip	SCIP data structure
opbinput	OPB reading data
name	pointer to store the name of the line; must be at least of size OPB_MAX_LINELEN
linvars	pointer to store the array with linear variables (must be freed by caller)
lincoefs	pointer to store the array with linear coefficients (must be freed by caller)
nlincoefs	pointer to store the number of linear coefficients
terms	pointer to store the array with nonlinear variables (must be freed by caller)
termcoefs	pointer to store the array with nonlinear coefficients (must be freed by caller)
ntermvars	pointer to store the number of nonlinear variables in the terms (must be freed by caller)
ntermcoefs	pointer to store the number of nonlinear coefficients
newsection	pointer to store whether a new section was encountered
isNonlinear	pointer to store if we have a nonlinear constraint
issoftcons	pointer to store whether it is a soft constraint (for wbo files)
weight	pointer to store the weight of the soft constraint

Definition at line 773 of file reader_opb.c.

References FALSE, getNextToken(), getVariableOrTerm(), hasError(), isEndingSoftConstraintWeight(), isEndLine(), isSense(), isSign(), isStartingSoftConstraintWeight(), isValue(), NULL, OPB_INIT_COEFSSIZE, pushBufferToken(), pushToken(), SCIP_Bool, SCIP_CALL, SCIP_MAXSTRLEN, SCIP_OKAY, SCIP_Real, SCIPallocBufferArray, SCIPcalcMemGrowSize(), SCIPdebugMsg, SCIPdebugMsgPrint, SCIPfeof(), SCIPfreeBufferArray, SCIPgetNConss(), SCIPgetNVars(), SCIPisIntegral(), SCIPisZero(), SCIPmemccpy(), SCIPreallocBufferArray, SCIPvarGetName(), SCIPwarningMessage(), swapTokenBuffer(), syntaxError(), and TRUE.

Referenced by readConstraints().

◆ setObjective()

static SCIP_RETCODE setObjective	(	SCIP *const	scip,
		OPBINPUT *const	opbinput,
		const char *	sense,
		SCIP_Real const	scale,
		SCIP_VAR **const	linvars,
		SCIP_Real *const	coefs,
		int const	ncoefs,
		SCIP_VAR ***const	terms,
		SCIP_Real *const	termcoefs,
		int *const	ntermvars,
		int const	ntermcoefs
	)

static

set the objective section

Parameters

scip	SCIP data structure
opbinput	OPB reading data
sense	objective sense
scale	objective scale
linvars	array of linear variables
coefs	array of objective values for linear variables
ncoefs	number of coefficients for linear part
terms	array with nonlinear variables
termcoefs	array of objective values for nonlinear variables
ntermvars	number of nonlinear variables in the terms
ntermcoefs	number of nonlinear coefficients

Definition at line 1127 of file reader_opb.c.

References ARTIFICIALVARNAMEPREFIX, FALSE, hasError(), isEndLine(), NULL, SCIP_CALL, SCIP_MAXSTRLEN, SCIP_OBJSENSE_MAXIMIZE, SCIP_OKAY, SCIP_Real, SCIP_VARTYPE_BINARY, SCIP_VARTYPE_INTEGER, SCIPaddCons(), SCIPaddOrigObjoffset(), SCIPaddVar(), SCIPaddVarObj(), SCIPchgVarBranchPriority(), SCIPcreateConsAnd(), SCIPcreateConsPseudoboolean(), SCIPcreateVar(), SCIPdebugAddSolVal, SCIPdebugGetSolVal, SCIPdebugPrintCons, SCIPisFeasEQ(), SCIPisFeasGE(), SCIPisFeasLE(), SCIPisFeasZero(), SCIPreleaseCons(), SCIPreleaseVar(), SCIPsnprintf(), SCIPvarGetNegationVar(), SCIPvarIsNegated(), and TRUE.

Referenced by readConstraints().

◆ readConstraints()

static SCIP_RETCODE readConstraints	(	SCIP *	scip,
		OPBINPUT *	opbinput,
		SCIP_Real	objscale,
		int *	nNonlinearConss
	)

static

reads the constraints section

Parameters

scip	SCIP data structure
opbinput	OPB reading data
objscale	objective scale
nNonlinearConss	pointer to store number of nonlinear constraints

Definition at line 1336 of file reader_opb.c.

References createVariable(), FALSE, getNextToken(), hasError(), INDICATORVARNAME, isEndLine(), isSense(), isSign(), isValue(), NULL, OPB_MAX_LINELEN, OPB_SENSE_EQ, OPB_SENSE_GE, OPB_SENSE_LE, OPB_SENSE_NOTHING, readCoefficients(), READER_NAME, SCIP_Bool, SCIP_CALL, SCIP_INVALIDDATA, SCIP_MAXSTRLEN, SCIP_OKAY, SCIP_Real, SCIPaddCons(), SCIPchgVarObj(), SCIPcreateConsLinear(), SCIPcreateConsPseudoboolean(), SCIPdebugMsg, SCIPdebugPrintCons, SCIPerrorMessage, SCIPfreeBufferArrayNull, SCIPgetBoolParam(), SCIPinfinity(), SCIPisInfinity(), SCIPreleaseCons(), SCIPsnprintf(), setObjective(), syntaxError(), and TRUE.

Referenced by readOPBFile().

◆ getMaxAndConsDim()

static SCIP_RETCODE getMaxAndConsDim	(	SCIP *	scip,
		OPBINPUT *	opbinput,
		SCIP_Real *	objscale,
		SCIP_Real *	objoffset
	)

static

tries to read the first comment line which usually contains information about the max size of "and" products

Parameters

scip	SCIP data structure
opbinput	OPB reading data
objscale	pointer to store objective scale
objoffset	pointer to store objective offset

Definition at line 1570 of file reader_opb.c.

References commentchars, delimchars, FALSE, NULL, SCIP_Bool, SCIP_CALL_ABORT, SCIP_OKAY, SCIP_READERROR, SCIPcalcMemGrowSize(), SCIPdebugMsg, SCIPfeof(), SCIPfgets(), SCIPreallocBlockMemoryArray, and TRUE.

Referenced by readOPBFile().

◆ readOPBFile()

static SCIP_RETCODE readOPBFile	(	SCIP *	scip,
		OPBINPUT *	opbinput,
		const char *	filename
	)

static

reads an OPB file

Parameters

scip	SCIP data structure
opbinput	OPB reading data
filename	name of the input file

Definition at line 1687 of file reader_opb.c.

References FALSE, getMaxAndConsDim(), hasError(), NULL, readConstraints(), SCIP_CALL, SCIP_Longint, SCIP_NOFILE, SCIP_OKAY, SCIP_Real, SCIPaddCons(), SCIPaddOrigObjoffset(), SCIPallocBufferArray, SCIPcreateConsLinear(), SCIPcreateProb(), SCIPdebugPrintCons, SCIPerrorMessage, SCIPfclose(), SCIPfeof(), SCIPfloor(), SCIPfopen(), SCIPfreeBufferArray, SCIPgetNVars(), SCIPgetVars(), SCIPinfinity(), SCIPisIntegral(), SCIPisZero(), SCIPprintSysError(), SCIPreleaseCons(), SCIPvarGetObj(), TOPCOSTCONSNAME, and TRUE.

Referenced by SCIPreadOpb().

◆ getBinVarsRepresentatives()

static SCIP_RETCODE getBinVarsRepresentatives	(	SCIP *const	scip,
		SCIP_VAR **const	vars,
		int const	nvars,
		SCIP_Bool const	transformed
	)

static

transforms given and constraint variables to the corresponding active or negated variables

Parameters

scip	SCIP data structure
vars	vars array to get active variables for
nvars	pointer to number of variables and values in vars and vals array
transformed	transformed constraint?

Definition at line 1791 of file reader_opb.c.

References NULL, SCIP_Bool, SCIP_CALL, SCIP_INVALIDDATA, SCIP_OKAY, SCIP_Real, SCIPdebugMsg, SCIPgetBinvarRepresentative(), SCIPgetNegatedVar(), SCIPisEQ(), SCIPisZero(), and SCIPvarGetOrigvarSum().

Referenced by computeAndConstraintInfos().

◆ getActiveVariables()

static SCIP_RETCODE getActiveVariables	(	SCIP *	scip,
		SCIP_VAR **	vars,
		SCIP_Real *	scalars,
		int *	nvars,
		SCIP_Real *	constant,
		SCIP_Bool	transformed
	)

static

transforms given variables, scalars, and constant to the corresponding active variables, scalars, and constant

Parameters

scip	SCIP data structure
vars	vars array to get active variables for
scalars	scalars a_1, ..., a_n in linear sum a_1x_1 + ... + a_nx_n + c
nvars	pointer to number of variables and values in vars and vals array
constant	pointer to constant c in linear sum a_1x_1 + ... + a_nx_n + c
transformed	transformed constraint?

Definition at line 1855 of file reader_opb.c.

References NULL, SCIP_CALL, SCIP_INVALIDDATA, SCIP_OKAY, SCIPgetProbvarLinearSum(), SCIPreallocBufferArray, SCIPvarGetOrigvarSum(), and TRUE.

Referenced by printLinearCons(), printNonLinearCons(), and printPseudobooleanCons().

◆ computeAndConstraintInfos()

static SCIP_RETCODE computeAndConstraintInfos	(	SCIP *const	scip,
		SCIP_Bool const	transformed,
		SCIP_VAR ***	resvars,
		int *	nresvars,
		SCIP_VAR ****	andvars,
		int **	nandvars,
		SCIP_Bool *const	existandconshdlr,
		SCIP_Bool *const	existands
	)

static

Parameters

scip	SCIP data structure
transformed	transformed problem?
resvars	pointer to store all resultant variables
nresvars	pointer to store the number of all resultant variables
andvars	pointer to store to all resultant variables their corresponding active( or negated) and-constraint variables
nandvars	pointer to store the number of all corresponding and-variables to their corresponding resultant variable
existandconshdlr	pointer to store whether the and-constrainthandler exists
existands	pointer to store if their exists some and-constraints

Definition at line 1900 of file reader_opb.c.

References a, FALSE, getBinVarsRepresentatives(), NULL, r, SCIP_CALL, SCIP_INVALIDDATA, SCIP_OKAY, SCIPallocBufferArray, SCIPallocMemoryArray, SCIPconsGetHdlr(), SCIPconshdlrGetConss(), SCIPconshdlrGetName(), SCIPconshdlrGetNConss(), SCIPdebug, SCIPdebugMsg, SCIPduplicateMemoryArray, SCIPfindConshdlr(), SCIPfreeBufferArray, SCIPgetNOrigConss(), SCIPgetNVarsAnd(), SCIPgetOrigConss(), SCIPgetResultantAnd(), SCIPgetVarsAnd(), SCIPprintVar(), SCIPreallocMemoryArray, SCIPsortedvecFindPtr(), SCIPsortPtrPtrInt(), SCIPwarningMessage(), and TRUE.

Referenced by SCIPwriteOpb().

◆ clearBuffer()

static void clearBuffer	(	char *	linebuffer,
		int *	linecnt
	)

static

clears the given line buffer

Parameters

linebuffer	line
linecnt	number of characters in line

Definition at line 2104 of file reader_opb.c.

References NULL.

Referenced by printNLRow(), printPBRow(), printRow(), writeBuffer(), writeOpbFixedVars(), writeOpbObjective(), and writeOpbRelevantAnds().

◆ writeBuffer()

static void writeBuffer	(	SCIP *	scip,
		FILE *	file,
		char *	linebuffer,
		int *	linecnt
	)

static

ends the given line with '\0' and prints it to the given file stream

Parameters

scip	SCIP data structure
file	output file (or NULL for standard output)
linebuffer	line
linecnt	number of characters in line

Definition at line 2119 of file reader_opb.c.

References clearBuffer(), NULL, OPB_MAX_LINELEN, and SCIPinfoMessage().

Referenced by appendBuffer(), printNLRow(), printPBRow(), printRow(), writeOpbFixedVars(), writeOpbObjective(), and writeOpbRelevantAnds().

◆ appendBuffer()

static void appendBuffer	(	SCIP *	scip,
		FILE *	file,
		char *	linebuffer,
		int *	linecnt,
		const char *	extension
	)

static

appends extension to line and prints it to the give file stream if the line buffer get full

Parameters

scip	SCIP data structure
file	output file (or NULL for standard output)
linebuffer	line buffer
linecnt	number of characters in line
extension	string to extent the line

Definition at line 2142 of file reader_opb.c.

References NULL, OPB_MAX_LINELEN, and writeBuffer().

Referenced by printNLRow(), printPBRow(), printRow(), writeOpbFixedVars(), writeOpbObjective(), and writeOpbRelevantAnds().

◆ writeOpbObjective()

static SCIP_RETCODE writeOpbObjective	(	SCIP *const	scip,
		FILE *const	file,
		SCIP_VAR **const	vars,
		int const	nvars,
		SCIP_VAR **const	resvars,
		int const	nresvars,
		SCIP_VAR *const const	andvars,
		int const *const	nandvars,
		SCIP_OBJSENSE const	objsense,
		SCIP_Real const	objscale,
		SCIP_Real const	objoffset,
		char const *const	multisymbol,
		SCIP_Bool const	existands,
		SCIP_Bool const	transformed
	)

static

write objective function

Parameters

scip	SCIP data structure
file	output file, or NULL if standard output should be used
vars	array with active (binary) variables
nvars	number of active variables in the problem
resvars	array of resultant variables
nresvars	number of resultant variables
andvars	corresponding array of and-variables
nandvars	array of numbers of corresponding and-variables
objsense	objective sense
objscale	scalar applied to objective function; external objective value is extobj = objsense * objscale * (intobj + objoffset)
objoffset	objective offset from bound shifting and fixing
multisymbol	the multiplication symbol to use between coefficient and variable
existands	does some and-constraints exist?
transformed	TRUE iff problem is the transformed problem

Definition at line 2165 of file reader_opb.c.

References a, appendBuffer(), clearBuffer(), FALSE, INDICATORVARNAME, NULL, OPB_MAX_LINELEN, SCIP_Bool, SCIP_INVALIDDATA, SCIP_Longint, SCIP_LONGINT_MAX, SCIP_OBJSENSE_MAXIMIZE, SCIP_OKAY, SCIP_Real, SCIP_VARSTATUS_NEGATED, SCIP_VARSTATUS_ORIGINAL, SCIPABORT, SCIPconsGetHdlr(), SCIPconshdlrGetConss(), SCIPconshdlrGetName(), SCIPconshdlrGetNConss(), SCIPdebugMsg, SCIPerrorMessage, SCIPfindCons(), SCIPfindConshdlr(), SCIPgetCapacityKnapsack(), SCIPgetNVarsKnapsack(), SCIPgetNVarsLinear(), SCIPgetNVarsSetppc(), SCIPgetRhsLinear(), SCIPgetVarsKnapsack(), SCIPgetVarsLinear(), SCIPgetVarsSetppc(), SCIPinfoMessage(), SCIPisIntegral(), SCIPisZero(), SCIPround(), SCIPsnprintf(), SCIPsortedvecFindPtr(), SCIPvarGetIndex(), SCIPvarGetName(), SCIPvarGetNegationVar(), SCIPvarGetObj(), SCIPvarGetStatus(), SCIPvarIsNegated(), TOPCOSTCONSNAME, TRUE, w, and writeBuffer().

Referenced by writeOpb().

◆ printNLRow()

static SCIP_RETCODE printNLRow	(	SCIP *const	scip,
		FILE *const	file,
		char const *const	type,
		SCIP_VAR **const	vars,
		SCIP_Real const *const	vals,
		int const	nvars,
		SCIP_Real	lhs,
		SCIP_VAR **const	resvars,
		int const	nresvars,
		SCIP_VAR *const const	andvars,
		int const *const	nandvars,
		SCIP_Longint	weight,
		SCIP_Longint *const	mult,
		char const *const	multisymbol
	)

static

Parameters

scip	SCIP data structure
file	output file (or NULL for standard output)
type	row type ("=" or ">=")
vars	array of variables
vals	array of values
nvars	number of variables
lhs	left hand side
resvars	array of resultant variables
nresvars	number of resultant variables
andvars	corresponding array of and-variables
nandvars	array of numbers of corresponding and-variables
weight	if we found a soft constraint this is the weight, otherwise 0
mult	multiplier for the coefficients
multisymbol	the multiplication symbol to use between coefficient and variable

Definition at line 2537 of file reader_opb.c.

References a, appendBuffer(), clearBuffer(), NULL, OPB_MAX_LINELEN, SCIP_Bool, SCIP_INVALIDDATA, SCIP_Longint, SCIP_LONGINT_MAX, SCIP_OKAY, SCIP_Real, SCIPerrorMessage, SCIPinfoMessage(), SCIPisIntegral(), SCIPisZero(), SCIPround(), SCIPsnprintf(), SCIPsortedvecFindPtr(), SCIPvarGetIndex(), SCIPvarGetName(), SCIPvarGetNegationVar(), SCIPvarIsNegated(), and writeBuffer().

Referenced by printNonLinearCons().

◆ printNonLinearCons()

static SCIP_RETCODE printNonLinearCons	(	SCIP *const	scip,
		FILE *const	file,
		SCIP_VAR **const	vars,
		SCIP_Real *const	vals,
		int const	nvars,
		SCIP_Real const	lhs,
		SCIP_Real const	rhs,
		SCIP_VAR **const	resvars,
		int const	nresvars,
		SCIP_VAR *const const	andvars,
		int const *const	nandvars,
		SCIP_Longint	weight,
		SCIP_Bool const	transformed,
		char const *const	multisymbol
	)

static

prints given maybe non-linear constraint information in OPB format to file stream

Parameters

scip	SCIP data structure
file	output file (or NULL for standard output)
vars	array of variables
vals	array of coefficients values (or NULL if all coefficient values are 1)
nvars	number of variables
lhs	left hand side
rhs	right hand side
resvars	array of resultant variables
nresvars	number of resultant variables
andvars	corresponding array of and-variables
nandvars	array of numbers of corresponding and-variables
weight	if we found a soft constraint this is the weight, otherwise 0
transformed	transformed constraint?
multisymbol	the multiplication symbol to use between coefficient and variable

Definition at line 2671 of file reader_opb.c.

References getActiveVariables(), NULL, printNLRow(), SCIP_CALL, SCIP_Longint, SCIP_OKAY, SCIP_Real, SCIPallocBufferArray, SCIPduplicateBufferArray, SCIPfreeBufferArray, SCIPisEQ(), and SCIPisInfinity().

Referenced by writeOpbConstraints().

◆ printRow()

static SCIP_RETCODE printRow	(	SCIP *	scip,
		FILE *	file,
		const char *	type,
		SCIP_VAR **	vars,
		SCIP_Real *	vals,
		int	nvars,
		SCIP_Real	lhs,
		SCIP_Longint	weight,
		SCIP_Longint *	mult,
		const char *	multisymbol
	)

static

Parameters

scip	SCIP data structure
file	output file (or NULL for standard output)
type	row type ("=" or ">=")
vars	array of variables
vals	array of values
nvars	number of variables
lhs	left hand side
weight	if we found a soft constraint this is the weight, otherwise 0
mult	multiplier for the coefficients
multisymbol	the multiplication symbol to use between coefficient and variable

Definition at line 2774 of file reader_opb.c.

References appendBuffer(), clearBuffer(), INDICATORVARNAME, NULL, OPB_MAX_LINELEN, SCIP_Bool, SCIP_INVALIDDATA, SCIP_Longint, SCIP_LONGINT_MAX, SCIP_OKAY, SCIP_Real, SCIPerrorMessage, SCIPinfoMessage(), SCIPisIntegral(), SCIPisZero(), SCIPround(), SCIPsnprintf(), SCIPvarGetName(), SCIPvarGetNegationVar(), SCIPvarIsNegated(), and writeBuffer().

Referenced by printLinearCons().

◆ printLinearCons()

static SCIP_RETCODE printLinearCons	(	SCIP *	scip,
		FILE *	file,
		SCIP_VAR **	vars,
		SCIP_Real *	vals,
		int	nvars,
		SCIP_Real	lhs,
		SCIP_Real	rhs,
		SCIP_Longint	weight,
		SCIP_Bool	transformed,
		const char *	multisymbol
	)

static

prints given linear constraint information in OPB format to file stream

Parameters

scip	SCIP data structure
file	output file (or NULL for standard output)
vars	array of variables
vals	array of coefficients values (or NULL if all coefficient values are 1)
nvars	number of variables
lhs	left hand side
rhs	right hand side
weight	if we found a soft constraint this is the weight, otherwise 0
transformed	transformed constraint?
multisymbol	the multiplication symbol to use between coefficient and variable

Definition at line 2869 of file reader_opb.c.

References getActiveVariables(), NULL, printRow(), SCIP_CALL, SCIP_Longint, SCIP_OKAY, SCIP_Real, SCIPallocBufferArray, SCIPduplicateBufferArray, SCIPfreeBufferArray, SCIPisEQ(), and SCIPisInfinity().

Referenced by writeOpbConstraints().

◆ printPBRow()

static SCIP_RETCODE printPBRow	(	SCIP *const	scip,
		FILE *const	file,
		const char *	type,
		SCIP_VAR **const	linvars,
		SCIP_Real *const	linvals,
		int const	nlinvars,
		SCIP_VAR ***const	termvars,
		int *const	ntermvars,
		SCIP_Real *const	termvals,
		int const	ntermvals,
		SCIP_Bool **const	negatedarrays,
		SCIP_VAR *const	indvar,
		SCIP_Real	lhs,
		SCIP_Longint *	mult,
		const char *	multisymbol
	)

static

Parameters

scip	SCIP data structure
file	output file (or NULL for standard output)
type	row type ("=" or ">=")
linvars	array of variables
linvals	array of values
nlinvars	number of variables
termvars	term array with array of variables to print
ntermvars	array with number of variables in each term
termvals	array of coefficient values for non-linear variables
ntermvals	number non-linear variables in the problem
negatedarrays	array of arrays to know which variable in a non-linear part is negated
indvar	indicator variable, or NULL
lhs	left hand side
mult	multiplier for the coefficients
multisymbol	the multiplication symbol to use between coefficient and variable

Definition at line 2964 of file reader_opb.c.

References appendBuffer(), clearBuffer(), INDICATORVARNAME, NULL, OPB_MAX_LINELEN, SCIP_Bool, SCIP_INVALIDDATA, SCIP_Longint, SCIP_OKAY, SCIP_Real, SCIPinfoMessage(), SCIPisIntegral(), SCIPisZero(), SCIPround(), SCIPsnprintf(), SCIPvarGetName(), SCIPvarGetNegationVar(), SCIPvarGetObj(), SCIPvarIsNegated(), and writeBuffer().

Referenced by printPseudobooleanCons().

◆ printPseudobooleanCons()

static SCIP_RETCODE printPseudobooleanCons	(	SCIP *const	scip,
		FILE *const	file,
		SCIP_VAR **const	linvars,
		SCIP_Real *const	linvals,
		int const	nlinvars,
		SCIP_VAR ***const	termvars,
		int *const	ntermvars,
		SCIP_Real *const	termvals,
		int const	ntermvals,
		SCIP_VAR *const	indvar,
		SCIP_Real const	lhs,
		SCIP_Real const	rhs,
		SCIP_Bool	transformed,
		const char *	multisymbol
	)

static

prints given pseudo boolean constraint information in OPB format to file stream

Parameters

scip	SCIP data structure
file	output file, or NULL if standard output should be used
linvars	array with variables of linear part
linvals	array of coefficients values of linear part
nlinvars	number variables in linear part of the problem
termvars	term array with array of variables to print
ntermvars	array with number of variables in each term
termvals	array of coefficient values for non-linear variables
ntermvals	number non-linear variables in the problem
indvar	indicator variable, or NULL
lhs	left hand side of constraint
rhs	right hand side of constraint
transformed	should the transformed problem be printed ?
multisymbol	the multiplication symbol to use between coefficient and variable

Definition at line 3101 of file reader_opb.c.

References BMSclearMemoryArray, getActiveVariables(), NULL, printPBRow(), SCIP_Bool, SCIP_CALL, SCIP_Longint, SCIP_OKAY, SCIP_Real, SCIPallocBufferArray, SCIPduplicateBufferArray, SCIPfreeBufferArray, SCIPgetBinvarRepresentatives(), SCIPisEQ(), and SCIPisInfinity().

Referenced by writeOpbConstraints().

◆ determineTotalNumberLinearConss()

static void determineTotalNumberLinearConss	(	SCIP *const	scip,
		SCIP_CONS **const	conss,
		int const	nconss,
		int *	nlinearconss,
		int *	nsplitlinearconss
	)

static

determine total number of linear constraints split into lhs/rhs

Parameters

scip	SCIP data structure
conss	array with constraints of the problem
nconss	number of constraints in the problem
nlinearconss	pointer to store the total number of linear constraints
nsplitlinearconss	pointer to store the total number of linear constraints split into lhs/rhs

Definition at line 3253 of file reader_opb.c.

References NULL, SCIPconsGetHdlr(), SCIPconshdlrGetName(), SCIPgetLhsLinear(), SCIPgetLhsVarbound(), SCIPgetRhsLinear(), SCIPgetRhsVarbound(), and SCIPisInfinity().

Referenced by writeOpb().

◆ writeOpbConstraints()

static SCIP_RETCODE writeOpbConstraints	(	SCIP *const	scip,
		FILE *const	file,
		SCIP_CONS **const	conss,
		int const	nconss,
		SCIP_VAR **const	vars,
		int const	nvars,
		SCIP_VAR **const	resvars,
		int const	nresvars,
		SCIP_VAR *const const	andvars,
		int const *const	nandvars,
		char const *const	multisymbol,
		SCIP_Bool const	existandconshdlr,
		SCIP_Bool const	existands,
		SCIP_Bool const	transformed
	)

static

write constraints

Parameters

scip	SCIP data structure
file	output file, or NULL if standard output should be used
conss	array with constraints of the problem
nconss	number of constraints in the problem
vars	array with active (binary) variables
nvars	number of active variables in the problem
resvars	array of resultant variables
nresvars	number of resultant variables
andvars	corresponding array of and-variables
nandvars	array of numbers of corresponding and-variables
multisymbol	the multiplication symbol to use between coefficient and variable
existandconshdlr	does and-constrainthandler exist?
existands	does some and-constraints exist?
transformed	TRUE iff problem is the transformed problem

Definition at line 3310 of file reader_opb.c.

References FALSE, NULL, printLinearCons(), printNonLinearCons(), printPseudobooleanCons(), SCIP_Bool, SCIP_CALL, SCIP_INVALIDDATA, SCIP_Longint, SCIP_OKAY, SCIP_Real, SCIP_SETPPCTYPE_COVERING, SCIP_SETPPCTYPE_PACKING, SCIP_SETPPCTYPE_PARTITIONING, SCIP_VARSTATUS_AGGREGATED, SCIP_VARSTATUS_MULTAGGR, SCIP_VARSTATUS_NEGATED, SCIP_VARTYPE_BINARY, SCIPallocBufferArray, SCIPblkmem(), SCIPconsGetHdlr(), SCIPconsGetName(), SCIPconshdlrGetConss(), SCIPconshdlrGetName(), SCIPconshdlrGetNConss(), SCIPconsIsEnabled(), SCIPconsIsTransformed(), SCIPduplicateBufferArray, SCIPerrorMessage, SCIPfindConshdlr(), SCIPfreeBufferArray, SCIPgetAndDatasPseudoboolean(), SCIPgetBinaryVarIndicator(), SCIPgetCapacityKnapsack(), SCIPgetIndVarPseudoboolean(), SCIPgetLhsLinear(), SCIPgetLhsPseudoboolean(), SCIPgetLhsVarbound(), SCIPgetLinDatasWithoutAndPseudoboolean(), SCIPgetLinearConsIndicator(), SCIPgetLinearConsPseudoboolean(), SCIPgetNAndsPseudoboolean(), SCIPgetNLinVarsWithoutAndPseudoboolean(), SCIPgetNVarsAnd(), SCIPgetNVarsKnapsack(), SCIPgetNVarsLinear(), SCIPgetNVarsLogicor(), SCIPgetNVarsSetppc(), SCIPgetRhsLinear(), SCIPgetRhsPseudoboolean(), SCIPgetRhsVarbound(), SCIPgetSlackVarIndicator(), SCIPgetTypeSetppc(), SCIPgetValsLinear(), SCIPgetVarsAnd(), SCIPgetVarsKnapsack(), SCIPgetVarsLinear(), SCIPgetVarsLogicor(), SCIPgetVarsSetppc(), SCIPgetVarVarbound(), SCIPgetVbdcoefVarbound(), SCIPgetVbdvarVarbound(), SCIPgetWeightsKnapsack(), SCIPhashmapCreate(), SCIPhashmapFree(), SCIPhashmapGetImage(), SCIPhashmapInsert(), SCIPinfinity(), SCIPinfoMessage(), SCIPprintCons(), SCIPvarGetNegationVar(), SCIPvarGetObj(), SCIPvarGetStatus(), SCIPvarGetType(), SCIPwarningMessage(), and TRUE.

Referenced by writeOpb().

◆ writeOpbFixedVars()

static SCIP_RETCODE writeOpbFixedVars	(	SCIP *const	scip,
		FILE *const	file,
		SCIP_VAR **	vars,
		int	nvars,
		SCIP_HASHTABLE *const	printedfixing,
		char const *const	multisymbol,
		SCIP_Bool const	transformed
	)

static

Parameters

scip	SCIP data structure
file	output file, or NULL if standard output should be used
vars	array with active (binary) variables
nvars	number of active variables in the problem
printedfixing	hashmap to store if a fixed variable was already printed
multisymbol	the multiplication symbol to use between coefficient and variable
transformed	TRUE iff problem is the transformed problem

Definition at line 3846 of file reader_opb.c.

References appendBuffer(), clearBuffer(), FALSE, NULL, OPB_MAX_LINELEN, SCIP_Bool, SCIP_CALL, SCIP_OKAY, SCIP_Real, SCIPgetBinvarRepresentative(), SCIPhashtableExists(), SCIPhashtableInsert(), SCIPisFeasIntegral(), SCIPsnprintf(), SCIPvarGetLbLocal(), SCIPvarGetLbOriginal(), SCIPvarGetName(), SCIPvarGetNegationVar(), SCIPvarGetUbLocal(), SCIPvarGetUbOriginal(), and writeBuffer().

Referenced by writeOpb().

◆ writeOpbRelevantAnds()

static SCIP_RETCODE writeOpbRelevantAnds	(	SCIP *const	scip,
		FILE *const	file,
		SCIP_VAR **const	resvars,
		int const	nresvars,
		SCIP_VAR *const const	andvars,
		int const *const	nandvars,
		SCIP_HASHTABLE *const	printedfixing,
		char const *const	multisymbol,
		SCIP_Bool const	transformed
	)

static

Parameters

scip	SCIP data structure
file	output file, or NULL if standard output should be used
resvars	array of resultant variables
nresvars	number of resultant variables
andvars	corresponding array of and-variables
nandvars	array of numbers of corresponding and-variables
printedfixing	hashmap to store if a fixed variable was already printed
multisymbol	the multiplication symbol to use between coefficient and variable
transformed	TRUE iff problem is the transformed problem

Definition at line 3920 of file reader_opb.c.

References a, appendBuffer(), clearBuffer(), FALSE, NULL, OPB_MAX_LINELEN, r, SCIP_Bool, SCIP_CALL, SCIP_Longint, SCIP_OKAY, SCIP_Real, SCIPgetBinvarRepresentative(), SCIPhashtableInsert(), SCIPisFeasIntegral(), SCIPsnprintf(), SCIPsortedvecFindPtr(), SCIPvarGetLbLocal(), SCIPvarGetLbOriginal(), SCIPvarGetName(), SCIPvarGetNegationVar(), SCIPvarGetUbLocal(), SCIPvarGetUbOriginal(), SCIPvarIsActive(), SCIPvarIsNegated(), TRUE, and writeBuffer().

Referenced by writeOpb().

◆ writeOpb()

static SCIP_RETCODE writeOpb	(	SCIP *	scip,
		FILE *	file,
		const char *	name,
		SCIP_Bool	transformed,
		SCIP_OBJSENSE	objsense,
		SCIP_Real	objscale,
		SCIP_Real	objoffset,
		SCIP_VAR **	vars,
		int	nvars,
		SCIP_CONS **	conss,
		int	nconss,
		SCIP_VAR **const	resvars,
		int const	nresvars,
		SCIP_VAR *const const	andvars,
		int const *const	nandvars,
		SCIP_Bool const	existandconshdlr,
		SCIP_Bool const	existands,
		SCIP_RESULT *	result
	)

static

Parameters

scip	SCIP data structure
file	output file, or NULL if standard output should be used
name	problem name
transformed	TRUE iff problem is the transformed problem
objsense	objective sense
objscale	scalar applied to objective function; external objective value is extobj = objsense * objscale * (intobj + objoffset)
objoffset	objective offset from bound shifting and fixing
vars	array with active (binary) variables
nvars	number of active variables in the problem
conss	array with constraints of the problem
nconss	number of constraints in the problem
resvars	array of resultant variables
nresvars	number of resultant variables
andvars	corresponding array of and-variables
nandvars	array of numbers of corresponding and-variables
existandconshdlr	does and-constrainthandler exist?
existands	does some and-constraints exist?
result	pointer to store the result of the file writing call

Definition at line 4185 of file reader_opb.c.

References determineTotalNumberLinearConss(), NULL, OPB_MAX_LINELEN, READER_NAME, SCIP_Bool, SCIP_CALL, SCIP_OKAY, SCIP_SUCCESS, SCIPblkmem(), SCIPgetBoolParam(), SCIPhashtableCreate(), SCIPhashtableFree(), SCIPinfoMessage(), SCIPsnprintf(), writeOpbConstraints(), writeOpbFixedVars(), writeOpbObjective(), and writeOpbRelevantAnds().

Referenced by SCIPwriteOpb().

◆ SCIP_DECL_READERCOPY()

static SCIP_DECL_READERCOPY ( readerCopyOpb )

static

copy method for reader plugins (called when SCIP copies plugins)

Definition at line 4525 of file reader_opb.c.

References NULL, READER_NAME, SCIP_CALL, SCIP_OKAY, SCIPincludeReaderOpb(), and SCIPreaderGetName().

◆ SCIP_DECL_READERREAD()

static SCIP_DECL_READERREAD ( readerReadOpb )

static

problem reading method of reader

Definition at line 4540 of file reader_opb.c.

References SCIP_CALL, SCIP_OKAY, and SCIPreadOpb().

◆ SCIP_DECL_READERWRITE()

static SCIP_DECL_READERWRITE ( readerWriteOpb )

static

problem writing method of reader

Definition at line 4551 of file reader_opb.c.

References SCIP_CALL, SCIP_OKAY, and SCIPwriteOpb().

Variable Documentation

◆ commentchars

const char commentchars[] = "*"

static

Definition at line 190 of file reader_opb.c.

Referenced by getMaxAndConsDim(), and getNextLine().

SCIP

Detailed Description

Macros

Typedefs

Enumerations

Functions

Variables

Macro Definition Documentation

◆ READER_NAME

◆ READER_DESC

◆ READER_EXTENSION

◆ GENCONSNAMES

◆ LINEAROBJECTIVE

◆ INDICATORVARNAME

◆ INDICATORSLACKVARNAME

◆ TOPCOSTCONSNAME

◆ OPB_MAX_LINELEN

◆ OPB_MAX_PUSHEDTOKENS

◆ OPB_INIT_COEFSSIZE

Typedef Documentation

◆ OPBEXPTYPE

◆ OPBSENSE

◆ OPBINPUT

Enumeration Type Documentation

◆ OpbExpType

◆ OpbSense

Function Documentation

◆ syntaxError()

◆ hasError()

◆ isDelimChar()

◆ isTokenChar()

◆ isValueChar()

◆ getNextLine()

◆ swapPointers()

◆ getNextToken()

◆ pushToken()

◆ pushBufferToken()

◆ swapTokenBuffer()

◆ isEndLine()

◆ isSign()

◆ isValue()

◆ isSense()

◆ isStartingSoftConstraintWeight()

◆ isEndingSoftConstraintWeight()

◆ createVariable()

◆ getVariableOrTerm()

◆ readCoefficients()

◆ setObjective()

◆ readConstraints()

◆ getMaxAndConsDim()

◆ readOPBFile()

◆ getBinVarsRepresentatives()

◆ getActiveVariables()

◆ computeAndConstraintInfos()

◆ clearBuffer()

◆ writeBuffer()

◆ appendBuffer()

◆ writeOpbObjective()

◆ printNLRow()

◆ printNonLinearCons()

◆ printRow()

◆ printLinearCons()

◆ printPBRow()

◆ printPseudobooleanCons()

◆ determineTotalNumberLinearConss()

◆ writeOpbConstraints()

◆ writeOpbFixedVars()

◆ writeOpbRelevantAnds()

◆ writeOpb()

◆ SCIP_DECL_READERCOPY()

◆ SCIP_DECL_READERREAD()

◆ SCIP_DECL_READERWRITE()

Variable Documentation

◆ commentchars